close

Anmelden

Neues Passwort anfordern?

Anmeldung mit OpenID

difference - K 2013

EinbettenHerunterladen
MyCatalog 2013
2013
16 – 23 October
Düsseldorf, Germany
makes the
difference
International Trade Fair
No. 1 for Plastics
and Rubber Worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Personal guide for:
EMail: Product category: 02 - Plastics Products and processing
Search Criteria:
•
•
•
•
•
•
•
•
Company Figures
Company Profile
Contact Persons
Exhibitors with address and hall location
Hall map for each exhibitor
News / Product News
Product groups with descriptions and illustrations
main_prod_no
Messe Düsseldorf GmbH
Postfach 101006
40001 Düsseldorf
Germany
Tel. +49 (0)221 / 45 60-01
Fax +49 (0)221 / 45 60-668
www.messe-duesseldorf.de
© 2014 Messe Düsseldorf GmbH
3
© 2014 Messe Düsseldorf GmbH
4
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
1.38
Contents
1 Exhibitors . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
3A Composites GmbH . . . . . . . . . . . . . . .
1.2
A.B.S. Silo- und Förderanlagen GmbH . . . . . .
1.3
A.F. Supercell Co., Ltd. . . . . . . . . . . . . . .
1.4
A.J. Plast Public Plc. . . . . . . . . . . . . . . . .
1.5
Achim Pellen Dichtungstechnik GmbH . . . . . .
1.6
Aigle Macchine S.r.l. . . . . . . . . . . . . . . . .
1.7
AIMPLAS . . . . . . . . . . . . . . . . . . . . . .
1.8
Apex Machine Company . . . . . . . . . . . . . .
1.9
ARGOMM S.p.A. AR Group . . . . . . . . . . . .
1.10 ARICON Kunststoffwerk GmbH . . . . . . . . . .
1.11 Arla Plast AB . . . . . . . . . . . . . . . . . . . .
1.12 Arthur Habermann GmbH & Co. KG . . . . . . .
1.13 Arzuffi S.r.l. - High Vacuum Systems . . . . . . .
1.14 August Herzog Maschinenfabrik GmbH & Co. KG
1.15 Baoding Lida Plastic Industry Co., Ltd. . . . . . .
1.16 Baris Ambalaj Matbaacilik San. ve Tic. Ltd. Sti. .
1.17 Bekaert Advanced Filtration SA/NV . . . . . . . .
1.18 Bekaert Fiber Technologies . . . . . . . . . . . .
1.19 BEN Kunststoffe GmbH . . . . . . . . . . . . . .
1.20 BIEGLO GmbH . . . . . . . . . . . . . . . . . . .
1.21 BIW Isolierstoffe GmbH . . . . . . . . . . . . . .
1.22 Blik 99 Ltd . . . . . . . . . . . . . . . . . . . . . .
1.23 Bluhm Systeme GmbH . . . . . . . . . . . . . . .
1.24 Brampton Engineering . . . . . . . . . . . . . . .
1.25 Brandenburger Isoliertechnik GmbH & Co. KG .
1.26 Brema-Werk GmbH & Co. KG . . . . . . . . . . .
1.27 Brett Martin Ltd. . . . . . . . . . . . . . . . . . .
1.28 Bucher Hydraulics GmbH . . . . . . . . . . . . .
1.29 Bänninger Kunststoff-Produkte GmbH . . . . . .
1.30 Bürkert GmbH & Co. KG Fluid Control Systems .
1.31 C.E.B. Impianti SRL . . . . . . . . . . . . . . . .
1.32 CN Mould & Plastic Limited . . . . . . . . . . . .
1.33 Colloids Limited . . . . . . . . . . . . . . . . . . .
1.34 Corvaglia Group . . . . . . . . . . . . . . . . . . .
1.35 Cytec . . . . . . . . . . . . . . . . . . . . . . . .
1.36 Denki Kagaku Kogyo Kabushiki Kaisha . . . . .
1.37 DESMA TEC . . . . . . . . . . . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12
12
14
18
20
21
24
25
28
31
35
37
43
53
55
56
58
59
61
63
66
73
75
80
83
85
87
88
98
101
104
106
107
109
113
115
116
119
5
1.39
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.56
1.57
1.58
1.59
1.60
1.61
1.62
1.63
1.64
1.65
1.66
1.67
1.68
1.69
1.70
1.71
1.72
1.73
1.74
1.75
1.76
1.77
Deutsche Gesellschaft für Kreislaufwirtschaft und Rohstoffe
mbH (DKR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dow Europe GmbH . . . . . . . . . . . . . . . . . . . . . . . .
DS SMITH PLASTICS . . . . . . . . . . . . . . . . . . . . . .
DUCATEX S.A. . . . . . . . . . . . . . . . . . . . . . . . . . .
EC Pack (Pump & Valve) Industrial Limited . . . . . . . . . . .
Eder Siebdruck Kunststoffverarbeitung GmbH & Co.KG . . .
Ensinger GmbH . . . . . . . . . . . . . . . . . . . . . . . . . .
Erge-Elektrowärmetechnik Franz Messer GmbH . . . . . . .
Essmann GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
ESWE-FLEX Walzen GmbH . . . . . . . . . . . . . . . . . . .
Eurofoam S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . . .
Exel Composites GmbH . . . . . . . . . . . . . . . . . . . . .
Exsto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F.W. Breidenbach GmbH & Co. KG . . . . . . . . . . . . . . .
Ferdinand Stükerjürgen GmbH & Co. KG Kunststoffwerk . . .
Fiberflon A.S. . . . . . . . . . . . . . . . . . . . . . . . . . . .
FIPA GmbH Vakuum- und Greifertechnik . . . . . . . . . . . .
FKT Formenbau und Kunststofftechnik GmbH . . . . . . . . .
FLAMBEAU . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Folienwerk Wolfen GmbH . . . . . . . . . . . . . . . . . . . .
foxiflex GmbH & Co. KG . . . . . . . . . . . . . . . . . . . . .
Frank GmbH . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fraunhofer Institut für Chemische Technologie ICT . . . . . .
Fraunhofer-Institut für Grenz- flächen- und Bioverfahrenstechnik IGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fried Kunststofftechnik GmbH . . . . . . . . . . . . . . . . . .
FUTURE PACK CO., LTD. . . . . . . . . . . . . . . . . . . . .
Gallez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gammacril s.r.l. . . . . . . . . . . . . . . . . . . . . . . . . . .
GAUDLITZ GmbH . . . . . . . . . . . . . . . . . . . . . . . .
GEHR GmbH . . . . . . . . . . . . . . . . . . . . . . . . . . .
Georg Utz GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
Gevacril S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . . . .
GFO Gesellschaft für Oberflächentechnik AG . . . . . . . . .
GLOBE INDUSTRIES CORPORATION . . . . . . . . . . . .
Good View Industrial Company Limited . . . . . . . . . . . . .
Greidenweis Maschinenbau OHG . . . . . . . . . . . . . . . .
Grupa Azoty S.A. . . . . . . . . . . . . . . . . . . . . . . . . .
Guangdong Decro Package Films Co.,Ltd. . . . . . . . . . .
Hans-Jürgen Keil Anlagenbau GmbH & Co. KG . . . . . . . .
HARDO-Maschinenbau GmbH . . . . . . . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
121
124
131
135
137
139
141
145
146
148
149
153
154
157
159
161
164
168
169
172
175
177
179
183
185
191
194
195
203
208
213
216
221
223
226
230
232
235
240
242
6
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
1.78
1.79
1.80
1.81
1.82
1.83
1.84
1.85
1.86
1.87
1.88
1.89
1.90
1.91
1.92
1.93
1.94
1.95
1.96
1.97
1.98
1.99
1.100
1.101
1.102
1.103
1.104
1.105
1.106
1.107
1.108
1.109
1.110
1.111
1.112
1.113
1.114
1.115
1.116
1.117
1.118
HAVER & BOECKER Drahtweberei und Maschinenfabrik
Hekuma GmbH . . . . . . . . . . . . . . . . . . . . . . .
Helios Italquartz S.r.l. . . . . . . . . . . . . . . . . . . .
Helvoet Holding B.V. . . . . . . . . . . . . . . . . . . . .
Heraeus Noblelight GmbH . . . . . . . . . . . . . . . . .
Herding GmbH Filtertechnik . . . . . . . . . . . . . . . .
Huntsman . . . . . . . . . . . . . . . . . . . . . . . . . .
Huzap GmbH Waagen- und Anlagenbau . . . . . . . . .
Hähl GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
ifw mould tec GmbH . . . . . . . . . . . . . . . . . . . .
igus® GmbH . . . . . . . . . . . . . . . . . . . . . . . .
IKS Schön GmbH . . . . . . . . . . . . . . . . . . . . . .
Impact Solutions . . . . . . . . . . . . . . . . . . . . . .
Indiana Gummi GmbH . . . . . . . . . . . . . . . . . . .
Industrie- und Handelskammer (IHK) Potsdam . . . . .
Industrie- und Handelskammer (IHK) Potsdam . . . . .
INGENIA GmbH . . . . . . . . . . . . . . . . . . . . . .
INOMETA GmbH & Co. KG . . . . . . . . . . . . . . . .
Institut für Kunststoffverarbeitung (IKV) in Industrie
Handwerk an der RWTH Aachen . . . . . . . . . . . . .
INTEREP . . . . . . . . . . . . . . . . . . . . . . . . . .
Isik Plastik A.S. . . . . . . . . . . . . . . . . . . . . . . .
ISL-Chemie GmbH & Co. KG . . . . . . . . . . . . . . .
ISO-TECH Kunststoff GmbH . . . . . . . . . . . . . . .
ISOKON, d.o.o. . . . . . . . . . . . . . . . . . . . . . . .
Isosport Verbundbauteile GmbH . . . . . . . . . . . . .
Italplastics GmbH . . . . . . . . . . . . . . . . . . . . . .
J. & F. Krüth GmbH Form-Ätz-Technik . . . . . . . . . .
J. Schmalz GmbH . . . . . . . . . . . . . . . . . . . . .
JB TECNICS SAS . . . . . . . . . . . . . . . . . . . . .
Jiangsu Lida Plastic Pallet Manufacturing Co., Ltd. . . .
Jiangxi Aidmer Polymer . . . . . . . . . . . . . . . . . .
JiLin Songjiang smart joint Co. Ltd. . . . . . . . . . . . .
Jing Mei Industrial Ltd. . . . . . . . . . . . . . . . . . . .
joke Folienschweißtechnik GmbH . . . . . . . . . . . . .
Kamadur Industrial Knives B.V. . . . . . . . . . . . . . .
Kase Equipment Corporation . . . . . . . . . . . . . . .
Kastilo Technische Gewebe GmbH . . . . . . . . . . . .
Katoplast AS . . . . . . . . . . . . . . . . . . . . . . . .
Khanna Polyrib Pvt. Ltd. . . . . . . . . . . . . . . . . . .
King Tech Mould Co.,Ltd . . . . . . . . . . . . . . . . . .
KIWO - KISSEL+WOLF GmbH . . . . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
und
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
244
245
248
250
253
254
256
261
264
265
267
270
277
284
288
301
315
319
328
332
336
340
343
347
352
362
364
366
368
375
377
380
382
384
385
387
388
389
391
393
395
7
1.119 Korsini - SAF Ambalaj San. ve. Tic. A.S. Ege Serbest Bölge
Subesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.120 Koschaum GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
1.121 Kremer-Kautschuk-Kunststoff GmbH & Co. KG Formteile &
Systeme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.122 Kreyenborg GmbH . . . . . . . . . . . . . . . . . . . . . . . .
1.123 KTS Kunststoff Technik Schmölln GmbH . . . . . . . . . . . .
1.124 Kunststoff Helmbrechts AG . . . . . . . . . . . . . . . . . . .
1.125 Kunststoff-Zentrum in Leipzig gGmbH . . . . . . . . . . . . .
1.126 Kuraray Europe GmbH . . . . . . . . . . . . . . . . . . . . . .
1.127 Kyoraku Co., Ltd . . . . . . . . . . . . . . . . . . . . . . . . .
1.128 Lenzing Plastics GmbH & Co. KG . . . . . . . . . . . . . . .
1.129 Lenzkes Spanntechnik GmbH . . . . . . . . . . . . . . . . . .
1.130 LEONHARD KURZ Stiftung & Co. KG . . . . . . . . . . . . .
1.131 Licharz GmbH . . . . . . . . . . . . . . . . . . . . . . . . . .
1.132 LITHOS Industrial Minerals GmbH . . . . . . . . . . . . . . .
1.133 LONG NEW INDUSTRIAL CO., LTD. . . . . . . . . . . . . . .
1.134 LPKF Laser & Electronics AG Laser Welding Division . . . . .
1.135 Luen Tai Rubber Manufactory . . . . . . . . . . . . . . . . . .
1.136 Luxus Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.137 M.O.L. Gummiverarbeitung GmbH & Co. KG . . . . . . . . .
1.138 Maag Flockmaschinen GmbH . . . . . . . . . . . . . . . . . .
1.139 Madag Printing Systems AG . . . . . . . . . . . . . . . . . . .
1.140 Man Fung Mould Industrial Co. Ltd. . . . . . . . . . . . . . .
1.141 Marubeni Europe Plc. Chemical Group . . . . . . . . . . . . .
1.142 Masterfoam GmbH . . . . . . . . . . . . . . . . . . . . . . . .
1.143 Mayser GmbH & Co. KG . . . . . . . . . . . . . . . . . . . . .
1.144 Mecasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.145 Mepla s.r.o. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.146 MIP SAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.147 Misr el nour Co. for plastic packages . . . . . . . . . . . . . .
1.148 Mitex GmbH Elastomertechnik . . . . . . . . . . . . . . . . .
1.149 Mitras Materials GmbH . . . . . . . . . . . . . . . . . . . . . .
1.150 Mitsui Chemicals Europe GmbH . . . . . . . . . . . . . . . .
1.151 ML ENGRAVING srl . . . . . . . . . . . . . . . . . . . . . . .
1.152 Molde Matos S.A. . . . . . . . . . . . . . . . . . . . . . . . . .
1.153 Momentive Performance Materials GmbH . . . . . . . . . . .
1.154 Motzener Kunststoff- und Gummiverarbeitung GmbH . . . . .
1.155 Moulages Industriels du Haut-Bugey . . . . . . . . . . . . . .
1.156 MTN Mould & Plastic Industry . . . . . . . . . . . . . . . . . .
1.157 Murtfeldt Kunststoffe GmbH & Co. KG . . . . . . . . . . . . .
1.158 Neilson Hot Stamper Machinery Co. Ltd. . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
397
398
402
406
410
412
415
418
430
432
434
435
447
452
456
457
460
461
464
467
469
470
472
477
480
482
484
488
490
491
493
498
500
504
506
514
518
519
522
525
8
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
1.159
1.160
1.161
1.162
1.163
1.164
1.165
1.166
1.167
1.168
1.169
1.170
1.171
1.172
1.173
1.174
1.175
1.176
1.177
1.178
1.179
1.180
1.181
1.182
1.183
1.184
1.185
1.186
1.187
1.188
1.189
1.190
1.191
1.192
1.193
1.194
1.195
1.196
1.197
1.198
1.199
1.200
NHH Coltec Ltd. . . . . . . . . . . . . . . . . . . . . . .
Nippon Gohsei Europe GmbH . . . . . . . . . . . . . . .
Novotex Italiana S.p.A. . . . . . . . . . . . . . . . . . . .
Nowofol Kunststoffprodukte GmbH & Co. KG . . . . . .
Oechsler AG . . . . . . . . . . . . . . . . . . . . . . . .
OLIMAR LTD . . . . . . . . . . . . . . . . . . . . . . . .
Ongropack Ltd. . . . . . . . . . . . . . . . . . . . . . . .
Optimum Rubber & Plastic Product Ltd. . . . . . . . . .
ORBILAN GmbH Kunststoffwerk . . . . . . . . . . . . .
Ottensteiner Kunststoff GmbH & Co. KG . . . . . . . . .
P.A.T.I. S.p.A. . . . . . . . . . . . . . . . . . . . . . . . .
P.O.S. Plasma Oberflächen Service GmbH . . . . . . .
Palram Industries Ltd. . . . . . . . . . . . . . . . . . . .
Parkinson Technologies Inc. . . . . . . . . . . . . . . . .
Pe Tech Foam Co., Ltd. . . . . . . . . . . . . . . . . . .
Plaskolite, Inc. . . . . . . . . . . . . . . . . . . . . . . .
Pleiger Unternehmensgruppe . . . . . . . . . . . . . . .
POLAR-FORM Werkzeugbau GmbH . . . . . . . . . . .
Polycasa GmbH . . . . . . . . . . . . . . . . . . . . . .
PolyIC GmbH & Co. KG . . . . . . . . . . . . . . . . . .
Praher Valves GmbH . . . . . . . . . . . . . . . . . . . .
Preco - Europe, Inc. . . . . . . . . . . . . . . . . . . . .
Proofex Packagings PVT. LTD. . . . . . . . . . . . . . .
PSI Brand . . . . . . . . . . . . . . . . . . . . . . . . . .
Pöppelmann Kunststoff-Technik GmbH Co. KG . . . . .
R+S Technik GmbH . . . . . . . . . . . . . . . . . . . .
RECA plastics GmbH . . . . . . . . . . . . . . . . . . .
Reinert-Ritz GmbH . . . . . . . . . . . . . . . . . . . . .
Ring Maschinenbau GmbH . . . . . . . . . . . . . . . .
Riwisa AG Kunststoffwerke . . . . . . . . . . . . . . . .
Robor S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . .
Rolf Körner GmbH . . . . . . . . . . . . . . . . . . . . .
Rotary Power Vertriebsgesellschaft m.b.H . . . . . . . .
SAINT-GOBAIN PPL FRANCE . . . . . . . . . . . . . .
Sangir Plastics P. Ltd . . . . . . . . . . . . . . . . . . . .
Sekisui Chemical GmbH . . . . . . . . . . . . . . . . . .
Sekisui Plastics Co., Ltd. . . . . . . . . . . . . . . . . .
Sekisui Plastics Europe B.V. . . . . . . . . . . . . . . . .
Shanghai Disoxidation Macromolecule Materials Co. Ltd.
Sheela Foam Pvt Ltd . . . . . . . . . . . . . . . . . . . .
Silex GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
SIMONA AG . . . . . . . . . . . . . . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .
. .
. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
527
528
531
533
539
544
545
548
549
551
556
564
567
571
577
578
582
589
592
594
596
599
601
602
606
609
612
614
616
618
622
625
627
628
657
660
665
667
671
672
674
677
9
1.201
1.202
1.203
1.204
1.205
1.206
1.207
1.208
1.209
1.210
1.211
1.212
1.213
1.214
1.215
1.216
1.217
1.218
1.219
1.220
1.221
1.222
1.223
1.224
1.225
1.226
1.227
1.228
1.229
1.230
1.231
1.232
1.233
1.234
1.235
1.236
1.237
1.238
1.239
1.240
1.241
Sonotronic Nagel GmbH . . . . . . . . . . . . . . . . . . . . .
Special Coatings GmbH & Co. KG . . . . . . . . . . . . . . .
Specialty Polyfilms (India) . . . . . . . . . . . . . . . . . . . .
SPRIMAG Spritzmaschinenbau GmbH & Co. KG . . . . . . .
Späh Karl GmbH & Co. KG SPÄH Gruppe (SPÄH, POPP,
QUADRIGA, SCHIPPL) DICHTUNGEN UND MEHR . . . . .
Sterne SAS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stöffl Rudolf GmbH Technische Produkte . . . . . . . . . . .
SUDHAUS GmbH & Co KG . . . . . . . . . . . . . . . . . . .
Sulzer Metaplas GmbH . . . . . . . . . . . . . . . . . . . . .
Sumitomo (SHI) Demag Plastics Machinery GmbH . . . . . .
SVP Packing Industry Pvt. Ltd . . . . . . . . . . . . . . . . .
Swastik Rubber Industries Pvt. Ltd. . . . . . . . . . . . . . .
synthetica Fluorplastics GmbH . . . . . . . . . . . . . . . . .
Szkaliczki & Partners Plastic Processing Ltd. . . . . . . . . .
T & J International Ltd. . . . . . . . . . . . . . . . . . . . . . .
T. Michel Formenbau GmbH & Co. KG . . . . . . . . . . . . .
Taiwan Mold Tool Co., Ltd . . . . . . . . . . . . . . . . . . . .
Taizhou Huangyan Yichuan Mould Factory . . . . . . . . . . .
Technamation Technical Europe GmbH . . . . . . . . . . . .
TEN-FLUID S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . .
THIEME GmbH und Co. KG Werk Breitigen . . . . . . . . . .
Thüringisches Institut f. Textil- u. Kunststoff-Forschung e.V. .
TOVO GOMMA S.p.A. . . . . . . . . . . . . . . . . . . . . . .
Traid Villarroya Hnos S.L. . . . . . . . . . . . . . . . . . . . .
Triplex Kunststoffe GmbH . . . . . . . . . . . . . . . . . . . .
TRUMPF Laser- und Systemtechnik GmbH . . . . . . . . . .
Truplast Kunststofftechnik GmbH . . . . . . . . . . . . . . . .
TSM GmbH Flocking and Rubber Machines . . . . . . . . . .
Tung Lee Precision Works Ltd. . . . . . . . . . . . . . . . . .
Ultralight AG . . . . . . . . . . . . . . . . . . . . . . . . . . .
van Baal GmbH . . . . . . . . . . . . . . . . . . . . . . . . . .
Verstraete in mould labels . . . . . . . . . . . . . . . . . . . .
Victrex Polymer Solutions . . . . . . . . . . . . . . . . . . . .
Wacker Chemie AG . . . . . . . . . . . . . . . . . . . . . . .
Waldorf Technik GmbH & Co. KG . . . . . . . . . . . . . . . .
WALZEN IRLE GmbH . . . . . . . . . . . . . . . . . . . . . .
Webex, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weifang Jingda Plastic Machinery Co., Ltd. . . . . . . . . . .
Weiss Chemie + Technik GmbH & Co. KG . . . . . . . . . . .
Wetzel GmbH . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wilhelm Kächele GmbH Elastomertechnik . . . . . . . . . . .
© 2014 Messe Düsseldorf GmbH
682
683
685
692
694
708
709
711
712
714
720
722
727
728
731
733
736
738
739
742
747
751
758
759
766
768
770
773
775
779
781
782
784
796
806
808
810
814
815
818
820
10
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
1.242 Wilhelm Köpp Zellkautschuk GmbH & Co. KG . . . . . . . . .
1.243 WKI Kunststoffe GmbH Berlin . . . . . . . . . . . . . . . . . .
1.244 Wolf Kunststoff-Gleitlager GmbH ZEDEX Hochleistungskunststoffe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.245 Worldpoly Pty Ltd . . . . . . . . . . . . . . . . . . . . . . . . .
1.246 Xeikon International . . . . . . . . . . . . . . . . . . . . . . . .
1.247 Zell-Metall GmbH Engineering Plastics . . . . . . . . . . . . .
1.248 Zhangjiagang Baixiong Klimens Machinery Co., Ltd. . . . . .
1.249 Zhejiang Huangyan Jiangnan Mould Factory . . . . . . . . .
1.250 Zhejiang Kinlead Innovative Materials Co., Ltd. . . . . . . . .
1.251 Ünveren Hava Sistemleri San. Ve Tic. Ltd. Sti. . . . . . . . .
2 Fairground Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Hall Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Hall EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Hall 01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Hall 02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4
Hall 03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5
Hall 04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6
Hall 05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7
Hall 06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8
Hall 07a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.9
Hall 07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.10 Hall 07.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.11 Hall 07.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.12 Hall 08b . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.13 Hall 08a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.14 Hall 09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.15 Hall 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.16 Hall 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.17 Hall 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.18 Hall 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.19 Hall 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.20 Hall 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.21 Hall 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.22 Hall 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
821
824
826
830
831
835
841
843
844
845
860
862
862
864
866
868
870
874
878
880
884
886
888
890
894
898
900
902
906
908
910
912
914
916
Exhibitors
3A Composites GmbH
Address
Alusingenplatz 1
78224 Singen
Germany
Phone
+49 7731 802989
Fax
+49 7731 802105
Internet address
www.display.3acomposites.com
E-Mail
display.eu@3acomposites.com
Stand
Hall 08a, C41 (Page 894)
Product Overview
3A Composites GmbH
02.05.074
Composite boards
02.05.049
Boards and vulcanite boards
Product Details
02.05.074
3A Composites GmbH
Composite boards
DIBOND® - The Original
DIBOND® was originally developed in 1992 by 3A
Composites as one of the first Aluminium Composite
sheets for the display and signage markets. The panel
combines two 0.3 mm aluminium surface layers with a
polyethylene core and comes with a protective film on
both sides. Front and reverse side are either stove lacquered, with white or
coloured surfaces and with either matt or high-gloss surfaces, anodized or even
© 2014 Messe Düsseldorf GmbH
11
© 2014 Messe Düsseldorf GmbH
12
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
textured.
Application fields
DIBOND® is used in either 2D or 3D applications and stands out through extremely flat surfaces, very high resistance to weathering and corrosion and high
stability. DIBOND® is used for interior and exterior applications.
Exhibition stands and displays Shop fitting, interior design Furniture constructions PoS/PoP displays, signage and shop fronts (interior and exterior)
The unique alloy - AlMg1
DIBOND® is the only ACM for display applications with an AlMg1 alloy High
corrosion resistance Very easy 3D processing characteristics due to unique alloy
Excellent processing parameters, e.g. bending, routing and folding
The special polyester coating
Stove lacquered according to ECCA Standard in Singen Consistently high colour
quality, trueness and colour thickness Absolutely flat surface No heavy metals in
the lacquers Applicable for screen printing and direct-to-substrate digital printing
UV-blocker – the black core
UV - protection No delamination or warping due to low thermal expansion Optimized for long term outdoor use Low thermal expansion compared to plastic
materials
Advantages of Handling, Transport and Installation
All FOREX® products can be easily processed for different 2D or 3D applications - manually or mechanically. Our technical service supports all our customers with their product-related questions, application or project queries. Due
to our excellent distribution network we can offer very short lead times throughout Europe.
Application field
FOREX® offers a wide range of excellent properties like high stability despite
minimal weight, excellent print substrate. FOREX® can be used internal and
external:
Signage Exhibitions Digital printing Shopfitting
RoHS directive / WEEE directive
FOREX®classic sheets fulfil the requirements of the RoHS und WEEE directives
of the European Union on the restriction of certain hazardous substances.
FOREX®classic sheets do not contain any of the following substances:
Lead Mercury Cadmium Hexavalent chromium Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Furthermore, FOREX®classic sheets do not contain ...
Relatively low weight combined with high stiffness and dimensional stability.
Ideal for large formats The combination of aluminium and a PE core offer easy
fabrication characteristics compared to full aluminium. Three dimensional processing through routing and folding technique Cost-effective through flat transportation and local installation Low thermal expansion compared to plastic materials
02.05.049
cially for direct digital printing, for internal and external
applications. Individuality is always welcome: customized colours, special packaging and even products according to customer specifications are an inherent
part of our FOREX® offering.
any formaldehyde any CFC‘s any asbestos any plasticisers any silicon
Boards and vulcanite boards
FOREX® - An impressive variety
For more than 30 years FOREX® is the synonym
for white, rigid plastic sheets made up of PVC. The
FOREX® product line (FOREX®classic, FOREX®print,
FOREX®color) offers a huge range of lightweight and
high-quality materials with a huge delivery program (10
different thicknesses from 1 up to 19 mm, 9 colours, 4
widths, 3 lengths, with or without protective film), espe-
© 2014 Messe Düsseldorf GmbH
13
© 2014 Messe Düsseldorf GmbH
14
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
regardless of the weather conditions and, thanks to an integrated weighing system, the ability to check the current storage levels at any time.
A.B.S. Silo- und Förderanlagen GmbH
A.B.S. is a specialist for flexible silos for storing all kinds of bulk goods and delivers to numerous countries all over the world. The customer is offered technically
mature system engineering – from compact, mobile Flex-Containers over stationary Flex-Silos for the most varied industrial bulk goods to turnkey silo plant
constructions with discharge aids. The services A.B.S. provides start with the
development, planning and design, and extend to the professional installation,
commissioning and a reliable service.
Address
Industriepark 100
74706 Osterburken
Germany
Phone
+49 6291 6422-0
Fax
+49 6291 6422-50
Internet address
www.abs-silos.de
E-Mail
info@abs-silos.de
Stand
Hall 13, D29 (Page 908)
Company News
04/30/2013
The Flex-Silos are made of very strong high-tech polyester fabrics - tailor-made
to the customer’s requirements, as uncoated or breathable versions, that prevent the formation of condensation thus improving storage quality, or in different
versions of coatings, depending on the application. On request, the silos for
example can be equipped with anti-static properties or have an approval for the
food sector.
A.B.S. Silo- und Förderanlagen GmbH
Every silo can be fitted with a range of technically mature equipment for measuring filling levels, weighing and dosing as well as intelligent control systems. The
A.B.S. system engineering makes it possible to integrate the silos into already
existing production lines, so that the production plants can be provided with bulk
goods just-in-time, as is done at Mir Upakovki in Russia.
Flexible silo plants by A.B.S. guarantee a high transparency in the production
process and the possibility of documenting by simply pressing a button- e.g.
when taking the inventory. The controls with a convenient colour touch panel
enable, for example, to find out the material throughput per minute and to check
the exact consumption of the plants.
Flexible silos for large Russian plastics processor
A.B.S. receives large order from Mir Upakovki, a leading manufacturer of plastic packaging from St. Petersburg.
In the last months several road trains have left the
yard of A.B.S. Silo- und Förderanlagen GmbH in Osterburken, their destination: St. Petersburg in Russia.
There are the company headquarters and production site of Mir Upakovki, a
leading Russian manufacturer of plastic packaging. Mir Upakovki has ordered
a large number of tailor-made, flexible silos from A.B.S. which are used to store
plastic granulates. The plastics specialist produces an extensive range of packaging and containers for the food, pharmaceutical and chemical, cosmetic and
perfume industry as well as other important industries.
Here at A.B.S. we are rather proud of receiving this large order from Russia.
Matthias Petzl: ”The quality of the high-strength fabrics and of the other materials
we use, are well known on the market. But this order from Russia we also
received because of our technical know how and pre-sales services, such as
the planning of tailor-made systems, as well as our after-sales service.”
According to Mir Upakovki, they made their decision for flexible silos by A.B.S.,
based on the fact that they offer a high storage capacity on only a small storage space as well as low transportation costs and are easy to install. Other
important reasons for the decision of the Russian manufacturer were the ability
to store various plastic materials for example polypropylene, polyethylene and
polystyrene, but also a large number of other special granulates in Flex-Silos,
© 2014 Messe Düsseldorf GmbH
15
© 2014 Messe Düsseldorf GmbH
16
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
04/30/2013
Flexible A.B.S. mixing and dosing logistics for leading
tank and container manufacturer
With headquarters in Weinstadt and Schnelldorf, as well as
subsidiaries in France, Great Britain and Austria, Chemowerk GmbH is one of the leading companies for the tank and
container construction sector and for the production of specific
moulded parts from fibre reinforced composites. The production programme not only includes modern transport and storage container technology such as heating oil tanks, grit containers and diesel tanks but also pumps and environmental
protection systems. Chemowerk also produces complete industrial solutions
such as filling stations for private consumption. Within the scope of building a
highly modern, new production plant for PE storage tanks and large containers,
the company selected with respect to the dosing logistics the solution offered by
A.B.S. Silo und Förderanlagen GmbH. The fact that A.B.S. could offer a complete turnkey solution from one source for the raw materials logistics upstream of
the production process was crucial for this selection. A total of six flexible transport bins were delivered together with discharge aids, three dosing stations and
three weigh bridges including the complete measurement and automation technology. The dosing station control unit can manage up to 150 different dosing
quantities. Flexibility combined with high dosing accuracy was of crucial importance to Chemowerk GmbH when choosing this solution since the production
of individual pieces frequently requires variable mixtures and dosing quantities.
A mixing station installed at the site is used to produce the required mixtures
in optimised quantities. In the first stage, this fills the transport bins supplied
by A.B.S. with a storage capacity of 1 m³ each. These containers simultaneously serve as temporary buffers which allow the production process to access
a total of six prepared material mixtures at any time. Each of the required FlexContainers is brought as needed to one of the three automatic dosing stations
also supplied and docked there at the top. The raw material quantity required
for the production of a certain individual piece is separately requested in each
case and following the input of the article number filled to 20 g accuracy by the
dosing system via an auger into a transport vessel placed on the weigh bridge.
The special benefits of the Flex-Containers also include the fact that they are
particularly suited for the raw materials used at Chemowerk. These materials
potentially have poor flowing properties since they tend to form bridges. In contrast to rigid containers, the usage of Flex-Containers with their yielding fabric
walls results in much lower bridge formation. The containers are also equipped
with the Walk-Ex discharge aid. This consists of an inflatable cone. Periodic
injection and extracting air causes the cone to change its geometry. In this way
bulk good bridges are broken down and the bulk goods flow out freely.
© 2014 Messe Düsseldorf GmbH
17
A.B.S. has the know-how required to supply you with tailor-made silos or containers made from engineered fabrics, with and without discharge aids. If requested,
you can receive the complete required system technology from one source. As
experts in the area of flexible plant systems with decades of experience, the company advises its customers in their planning and provides valuable hints for the
installation. A.B.S. has the know-how required to supply you with tailor-made
silos or containers made from engineered fabrics, with and without discharge
aids. If requested, you can receive the complete required system technology
from one source. As experts in the area of flexible plant systems with decades
of experience, the company advises its customers in their planning and provides
valuable hints for the installation.
Product Overview
A.B.S. Silo- und Förderanlagen GmbH
02.05.033
Storage and transport containers
03.07.002.01
Silos
Product Details
02.05.033
A.B.S. Silo- und Förderanlagen GmbH
Storage and transport containers
Storage and transport bins
Versatile solutions from A.B.S. are employed in, among
other industries, the plastic, recycling, pharmaceutical,
food, animal feed and confectionary industries.
- Maximal space utilisation
- Low own weight, which means that no complex foundations are required
- The fabrics used are selected exactly in accordance with the requirements of
your bulk goods
- High rigidity values and load capacities
- Optimal discharge properties
- Unlike outdoor silos, no separate planning permissions or expensive foundations are required
© 2014 Messe Düsseldorf GmbH
18
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
A.F. Supercell Co., Ltd.
Address
Product Details
70/7 Moo 3, Tambol Pananikom, Amphur
21180 Rayong
Thailand
Phone
+66 2 6341323-5
Fax
+66 2 6343829
Internet address
www.afsupercell.com
E-Mail
afsupercell@af.co.th
Stand
Hall 07, B23 (Page 884)
Product Overview
02.03.002
A.F. Supercell Co., Ltd.
Plastics products and parts for automotive
Mold maker & Plating
A.J. Plast Public Plc.
Address
95 Thakarm Road, Samaedam, Bangkhuntien
10150 Bangkok
Thailand
Phone
+66 2 4150035-6
Fax
+66 2 4153795
Internet address
www.ajplast.com
E-Mail
export@ajplast.co.th
Stand
Hall 07.1, D45 (Page 886)
A.F. Supercell Co., Ltd.
01.01.037
Masterbatches
01.05.019
Natural rubber
01.10.068
Kicker
01.10.081
Nucleating agents
01.10.100
Foaming agents
Product Overview
02.03.002
Plastics products and parts for automotive
01.01.049
Polyamide PA 06
01.01.085
Polyethylene terephthalate (PET)
01.01.093
Polypropylene
02.04.002
Films
© 2014 Messe Düsseldorf GmbH
19
A.J. Plast Public Plc.
© 2014 Messe Düsseldorf GmbH
20
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.04.002
A.J. Plast Public Plc.
Films
Achim Pellen Dichtungstechnik GmbH
Address
Brüsseler Allee 19 a
41812 Erkelenz
Germany
Phone
+49 2431 9734834
Products
Our products can be categorized into 4 groups – BOPP
film, BOPET film, BOPA film and Metallized film, which
are all used extensively in many industries for instance,
packaging, adhesive tapes, and cassette tapes, etc.
These 3 main groups can be used together or to substitute one another depending on the final products ’
characteristics and customers ’ requirements.
Fax
Internet address
BOPP film is a special structure biaxially oriented polypropylene film designed
to meet the requirement of high gloss, low haze, high tensile strength, excellent
thermal stability and good moisture barrier.
BOPET film is a special structure biaxially oriented polyester film suitable for
flexible packaging application with the features of high gloss, low haze, high
tensile strength, excellent thermal stability and oxygen barrier
Metallized film is a co-extruded biaxially oriented polypropylene film or biaxially
oriented polyester film, metallized on one surface with high purity aluminum with
excellent metal adhesion and web flatness metal deposition substantially improve moisture and gas barrier and provides protection against ultra-violet light,
visible light and infra-red radiation.
www.ap-dichtungstechnik.com
E-Mail
Stand
Hall 06, D76 (Page 878)
Company News
12.08.2013
Achim Pellen Dichtungstechnik GmbH
innovative Produktneuheit
Innovation „nicht rostendes TPE/ PVC Kantenschutzprofil mit Kunststoffkern oder ohne Träger als Klemmprofil“
– TPE- Profile- …unsere perfekte Lösung für Kantenschutzeinsätze in verschiedenen industriellen Bereichen
BOPA film
Characteristics
• Excellent barrier to gas, fat and transmission of aroma
• Exceptional Mechanical Strength
–verschiedene Profile in der Farbe schwarz lagernd,
andere RAL- Farbtöne möglich
• High resistance to impact punctures and pin holing
– TPE Kantenschutzdichtprofile auch für FDA/ Lebensmitteleinsätze
• Heat resistance, low temperature resistance
– zelliges /extrudiertes TPE Profil als Rundschnur/ Umweltbewusst und recyclefähig!
• Non toxic odorless
– Schwefelfreie Moosgummiprofile in weiß, grau und schwarz
• Printability / Metalizability
© 2014 Messe Düsseldorf GmbH
21
© 2014 Messe Düsseldorf GmbH
22
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.011
Product Overview
Sealings/Sealrings
Achim Pellen Dichtungstechnik GmbH
Dichtungen
02.01.002
Products made by extrusion
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
02.05.028
Rubber / plastics / metal combinations
individuelle O-Ringe aus Moosgummi und Weichgummi
oder Sonderprofile
Stanzteile aus Zellkautschuk, PE
Schlauchringe
Montage und Konfektionierung für kundenspezifische Anforderungen
02.05.028
Product Details
02.01.002
Achim Pellen Dichtungstechnik GmbH
technische Gummiwaren
Gummimetallteile, Gummimetallpuffer, Gummimetallbuchsen
Products made by extrusion
Extrusionsprodukte
Formteile, O-Ringe
Moosgummi-Weichgummidichtprofile, Sonderprofile und
Standardprofile /Rund-und Rechtkantprofile aus verschiedenen Werkstoffen EPDM, CR, NBR, NR, TPE,
PVC und Silikon
Aigle Macchine S.r.l.
Kantenschutzdichtprofile und Kantenschutz
02.05.010
Rubber / plastics / metal combinations
Address
Via Donatello, 8
10071 Borgaro Torinese / TO
Italy
Phone
+39 011 2624382
Fax
+39 011 2624348
Internet address
www.aigle.it
E-Mail
info@aigle.it
Stand
Hall 04, D02 (Page 870)
Sealing profiles
Dichtprofile
TPE/PVC/Si likon/Gumm i/-Kantens chutzdicht profile
mit Metallklemmband oder rostfreiem Kunststoffträger
neu: Kantenschutz ohne Kunststoffträger!
Moosgummi-und Weichgummidichtprofile auch mit Selbstklebeausrüstung möglich.
Kunststoffprofile aus TPE und PVC
technische Gummiwaren und Konfektionierung für innovative Lösungsmöglichkeiten
© 2014 Messe Düsseldorf GmbH
23
© 2014 Messe Düsseldorf GmbH
24
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
AIMPLAS
Product Overview
Aigle Macchine S.r.l.
02.05.005
Flocking
03.04.001
Printing equipment for plastic and rubber products
03.04.003
Embossing equipment
03.04.004
Laminating plant
03.04.005
Coating plant
03.04.006
Flocking plant
Product Details
02.05.005
Address
C/ Gustave Eiffel, 4 - Valencia Parque
46980 Paterna / Valencia
Spain
Phone
+34 96 1366040
Fax
+34 96 1366041
Internet address
www.aimplas.net
E-Mail
info@aimplas.es
Stand
Hall 08a, C32-3 (Page 894)
Aigle Macchine S.r.l.
Company News
Flocking
AC Flocking Machine
06/28/2013
With the AC system it is possible to obtain a higher flocking
speed. An AC electric device consisting of a set of special
electrodes mounted on an insulated frame is located below
each group of flocking hoppers. The AC system is normally
used in the field of upholstery fabrics.
© 2014 Messe Düsseldorf GmbH
AIMPLAS
Development of a new generation of more ecological
fire-resistant plastics
Thanks to nanotechnology, the European project PHOENIX
allows the substitution of fire-resistant halogenated additives for substances that are more respectful of human health and of the environment. The technology developed in the project makes it possible to reduce the
presence of additives down to 15%, against the 30% or
60% currently needed to incorporate in the case of other
non-halogenated additives. PHOENIX, a Collaborative
project from the 7th Framework Programme, aims to develop a new generation of fire-resistant plastics refraining from the traditional halogenated additives.
PHOENIX, with a 4 years duration and coordinated by AIMPLAS in Spain, is
composed of 15 partners from 8 European countries. Currently, fire-resistant
halogenated additives are used in a wide range of commercial items such as
electrical and electronic equipment, low-voltage cables or electrical appliances.
The elimination of such additives from the composition of these products is important because they are substances hazardous to public health and to the environment and, in fact, its use and recycling are addressed by several European
directives such as WEEE and RoHS. The limitation with non-halogenated ad-
25
© 2014 Messe Düsseldorf GmbH
26
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ditives, currently used in the market as an alternative to the traditional ones, is
that they are far less efficient. This means that polymers should contain between 30% and 60% of flame-retardant substances to achieve a better fire performance, while the halogenated polymers are efficient when containing only
15% of additives. However, by incorporating such high filler content in the polymer matrix, the processability and final product properties are significantly reduced whilst the cost of the parts is considerably increased. This severely limiting the range of applications and hindering non-halogenated flame retardant
market introduction to replace dangerous halogenated flame retardants.
Maximum efficiency thanks to nanotechnology PHOENIX aims to develop highly
efficient flame-retardant non-halogenated additives that display an excellent fire
performance while at the same time maintaining a low amount of additives in the
final product (15%). For this, nanostructured materials will be developed based
on the combination of different types of nanoparticles, among each other or in
combination with biobased additives, so that each will provide functionality to the
whole. Graphene, modified lignins, nanohydroxides and encapsulated phosphorus based flame retardants in hollow particles, will be combined and united by
the self-assembling technology. All flame retarders will be produced with sustainable methods of production from the viewpoint of safety at work, consumer
safety and environmental impact. Addiional information: http://www.phoenixeu-project.eu/ The research leading to these results has received funding from
the European Union Seventh Framework Programme (FP7/2007-2013) under
Grant Agreement nº 310187
09/19/2013
First biodegradable bottle for drugstore and healthcare
products
The new packaging, with capacity between 150 and
500 ml, preserves the properties of creams, gels,
shampoos or mouthwash, and after use (within 45 days
and four months) is decomposed into water, carbon
dioxide, salts and biomass.
The first biodegradable bottle for drugstore and healthcare products has been
successfully developed through BIO P FARM project.
The Spanish companies ALMUPLAS, Talleres Rubla and Talleres Pena and
AIMPLAS as technological partner, have developed a new biodegradable packaging with capacity between 150 and 500 ml intended to contain drugstore and
pharmacy products such as gels, shampoos, creams and mouthwashes.
products.
Nowadays, this type of packaging is only manufactured with high density
polyethylene due to the requirements of the manufacturing process and the characteristics of the product. From now, biodegradable materials can be used in
these packages, preserving the properties of the product contained, and adding
value from the environmental point of view.
The bottles obtained in BIO P FARM, after use and under appropriate conditions,
are decomposed into carbon dioxide, water, salts and biomass within 45 days
and four months.
Advantages also for packaging manufacturers
But the project has not only been a success in extending biodegradable materials to new applications. BIO P FARM has also been a major innovation in the
adaptation of the production process. The new packaging is not only easily processable in conventional equipment, but also the production process has been
made even saving costs due to lower energy consumption. This is an important
aspect in order to introduce this product into the market. Nowadays there are
1,300 blowing industry companies in Europe and the biodegradable packaging
demand is expected to rise up to two million tonnes on the horizon 2018.
The P BIO FARM project has been funded by the CDTI and cofinanced by
FEDER and had a duration of 24 months.
Product Overview
AIMPLAS
01.01.010.02
Bioplastics, Renewable based
01.01.023
Electrically conductive plastics
02.04.003.03
Parts from high performance thermoplastics
02.04.004
Compounds/Recyclates
04.06
Science and consulting
The project has achieved for the first time a biodegradable packaging for drugstore and healthcare products, although according to researchers who have
worked on the project could also be used in the food industry and some cleaning
© 2014 Messe Düsseldorf GmbH
27
© 2014 Messe Düsseldorf GmbH
28
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Apex Machine Company
Product Overview
Address
3000 Northeast 12th Terrace
33334 Fort Lauderdale, FL
USA
Phone
+1 954 566-1572
Fax
+1 954 563-2844
Apex Machine Company
02.02.003
Printing
02.05.047
Surface treated and decorated parts
03.04.001
Printing equipment for plastic and rubber products
03.04.002
Marking equipment
03.04.003
Embossing equipment
03.04.008
Equipment for In-Mould Decoration (IMD)
03.07.001.02
Machine vision systems
Internet address
E-Mail
nitaj@apex-sales.com
Stand
Hall 04, E22 (Page 870)
Company News
Apex Machine Company
Product Details
08/05/2013
Apex Machine Company
ISO 9001:2008 Certification
02.02.003
has been certified to conform to the International Quality System Standard, ISO
9001:2008, in its design and manufacture of their printing machines.
Apex acknowledges that it must have a quality system that governs all phases
of business operations in order to guarantee its customers that they will consistently receive the quality products and service that they expect, as well as, to
create an environment conducive to continuous improvement in all aspects of
the company.
Therefore, the ISO 9001 certification means the company has demonstrated its
commitment to enhancing customer satisfaction through the application of the
management system, with processes for continual improvement and the assurance of conformity to customer, statutory and regulatory requirements.
Specifically, ISO 9001 represents an international consensus on good quality
management practices which consists of standards and guidelines as it relates
to quality management and supporting standards.
While we view this certification as a minimum benchmark in the development of
all our future processes, it is great to be able to assure how serious we are about
delivering the best quality high performing printing and packaging systems.
© 2014 Messe Düsseldorf GmbH
29
Printing
S-40 & C-40 Printing Systems
Apex will debut their revolutionary high speed, multicolour S-11 flat components printing machine for components including packaging strapping and other extruded products, and a C-40 printer – capable of handling a wide range of cylindrical and conical substrates.
The special designs of the standard S-11 and C-40 series are particularly versatile and deliver a wide range of unique, high-impact and cost-effective printing
solutions for an ever-increasing array of specialty applications. For instance, the
S-11 is capable of printing continuous webs such as plastic strapping at speeds
exceeding 120 meters per minute per lane and the C-40 can print plastic or paper
candy sticks at speeds up to 2000 parts per minute.
What makes the Apex line of printing systems so appealing is they are all individually engineered for a range of parts and sizes to maximise changeability and
flexibility to achieve the highest level of machine efficiency and product yield.
The full Apex line of printing and decorating systems utilise different methods
of printing with examples being dry offset, the FLEXAPEX® system, and ro-
© 2014 Messe Düsseldorf GmbH
30
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
togravure offset. With its capability for high speed multi-colour printing in perfect
register, the FLEXAPEX® system offers a compelling value proposition as a
viable alternative to common silkscreen, hot stamping or rotary pad printing.
Apex Machine Company has been manufacturing speciality printing machinery
across the whole spectrum of industrial applications for close to 110 years and
also offers specialist services, support and equipment in many areas including,
but not limited to, advanced medical and pharmaceutical requirements, in particular in the areas of medical syringes, vials, catheters, pharmaceutical tubes,
pipettes and components for drug delivery systems.
The Apex team at the K Show will be available to demonstrate and discuss the
many options available for customers for applying printing and decoration to
three dimensional products whatever the requirement - whether large or small,
low or high speed, single or multi-colour, inline or offline, Apex will be able to
suggest suitable systems tailored to meet specific requirements.
For more information or to reserve a meeting time at the K show please contact:
Nita Janki – nitaj@apexmachine.com – Tel: +1 954 566 1572
02.05.047
Surface treated and decorated parts
Address
Via Camozzi, 22
24060 Villongo / BG
Italy
Phone
+39 035 4260111
Fax
+39 035 4260250
Internet address
www.argomm.it
E-Mail
info@argomm.it
Stand
Hall 08a, B21 (Page 894)
Product Overview
Tubes
© 2014 Messe Düsseldorf GmbH
ARGOMM S.p.A. AR Group
31
ARGOMM S.p.A. AR Group
02.04.003.03
Parts from high performance thermoplastics
02.05.011
Sealings/Sealrings
02.05.016
Bellows, expansible
02.05.027
Rubber / plastics combinations
02.05.028
Rubber / plastics / metal combinations
02.05.040
Packing rings
02.05.041
Membranes
02.05.058
Hoses
02.05.075.01
Fibreglass-reinforced plastic parts
© 2014 Messe Düsseldorf GmbH
32
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.011
ARGOMM S.p.A. AR Group
02.05.028
Rubber / plastics / metal combinations
Engine and drivetrain
Sealings/Sealrings
Air supply
The ArGroup products are used in the sub-systems of
the engines and transmission.
Over time ArGroup has deveIoped specific expertise regarding the problems associated with perfect sealing
and performance of the engine’s air supply system.
The wide range of mixtures based on ACM, AEM, NBR
, HNBR FPM, MVQ and MFVQ that are available and
approved by the principle European “ OEM ” and “Tier1”
allow the company to accept and resolve the requests
for specific static sealing in the numerous sub-systems
connected to the engine and the transmission. The sealing components produced by ArGroup are employed in traditional applications such as: oil pumps,
vacuum pumps, sta rter motors and alternators, actuators, in addition to more
modem applications soch as electric power-assisted steering and systems of
electrical traction.
This is a sector in continual expansion encouraged by
dynamic collaboration with the clients to understand the functional requisites,
and with the suppliers for the development of suitable materials.
The supply sector cover the entire line of the ”air” system, in particolar:
• Static seals for the filter box
• Sales for the connection
In addition to the traditional sealing produ cts, ArGroup also manufactures components in magnetic plastic used in magnetic sensors and encoders which are
increasingly used in the control of the engine and wheel speed of a vehicle.
• Sales for throttle body valves
• Sales for intake manifolds
The production technology available to ArGroup permits the manufacture of
components in a variety of shapes to satisfy a wide range of functional requirements. Form time to time, molded or cut from sleeves seals are proposed.
There is an increasing use of multi-material solution where a rigid support is overmolded with sealant components in vulcanized or thermoplastic rubber. The
ArGroup production reality has all time in-house expertise and plant necessary
for the completion of the entire manufacturing cycle.
ArGroup offers wide range of compounds and materials all conforming with the
specifications of the principle ”OEM” and ”Tier1” regarding the European Automotive industry (compounds also colored on the basis of FPM, HNBR, NBR,
MVQ, MFVQ).
Foe every application, ArGroup is in a position to offer an optimal solution, even
in economic terms, taking into consideration the main thecnical parameters:
• range of operational temperature
02.05.041
Membranes
Fuel supply
ArGroup produced sealing elements that can be used in
various positions along the fuel supply system. Among
them, the fuel filler port. the tank itself, the delivery
pump, the connectors, the high pressure pumps for the
common Rail systems and the injector.
Special attention has been given to the development of materials for this delicate sector to ensure compatibility with both traditional fuel and those that have
recently appeared on the market (e.g. diesel/RME mixtures, BluDiesel, oxygenated petrol), as well as full respect for the increasingly rescrictive norms
governing emissions to the environment.
Of the more important sealing elements in this sector, there are the o-rings. ArGroup is also in a position to tackle high-volume production lots, guaranteeing
maximum quality standards (for example the ISO 3601-3 Class S) even for materials that are not easily processed (reticular peroxide crosslinked FPM and
FPM for low temperatures).
• contact with fluids (feul, engine oil, blow-by)
The widespread use of artificial vision systems permits 100% automatic control
© 2014 Messe Düsseldorf GmbH
33
© 2014 Messe Düsseldorf GmbH
34
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
of the dimensions and the defects in o-ring of up to 59 mm external diameter.
Product Details
ArGroup also offers a number of different production technologies consenting
maximum freedom to the designers, in terms of shape and the materials used
in the production of the components.
02.05.033
Again in this area, the use of dual-component technology permits the development of efficacious solutions that can satisfy a number of multiple functions, in
addition to the traditional sealing functions.
ARICON Kunststoffwerk GmbH
Address
Phone
Monhofer Feld 1-3
42697 Solingen
Germany
ARICON Kunststoffwerk GmbH
Storage and transport containers
chemical-resistant tanks/ containers and formworkseries
ARICON Kuststoffwerk GmbH is manufacturer of chemicalresistant tanks/ containers and formwork-series made
of plastic. The production site is located in Solingen,
Germany. The product range offers tanks/ containers
for special processes with chemicals, water and food. Different container types
offer custom fit solutions for many processes.
ARICON offers more than 50 types of collecting trays for environmental protection against water harmful substances. They are used as a protection device for
containers with chemicals. All collecting trays have an approval of DIBt (German
institute for construction technique, Berlin).
+49 212 38232-0
ARICON is certified to DIN EN ISO 9001:2008.
Fax
+49 212 38232-10
Internet address
www.aricon.de
E-Mail
info@aricon.de
Delivery program:
- tanks/ containers for processes with up to 30500 litres capacity
- silos for bulk goods and liquids with steel frame. Up to 19600 litres capacity
- collecting trays for small and medium size containers, including certification
- collecting trays for IBC, including certification
Stand
Hall 07a, B06 (Page 880)
- formwork-series on customer request
Product features:
Product Overview
02.01.008
ARICON Kunststoffwerk GmbH
- chemical-resistant
- food safe
Parts made by rotation moulding
- seamless
02.03.001
Plastics products and parts for plant building
02.05.033
Storage and transport containers
02.05.067
Tanks
- high wall thickness
- pressure and crush tolerant
- for inside and outside storage
- form-stable in a temperature range from -30 ° C up to +60° C
- long lasting
Team and service:
© 2014 Messe Düsseldorf GmbH
35
© 2014 Messe Düsseldorf GmbH
36
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- development
Product Details
- production
02.01.002
- equipment
Arla Plast AB
Products made by extrusion
ATECH 2100R INDUSTRIAL
- sales
- guidance
ABS ATECH 2100R INDUSTRIAL IS RECYCLED ABS
SHEET SUITABLE FOR INDUSTRIAL APPLICATIONS.
A2000R-INDUSTRIAL is a series of recycled ABS sheets suitable for thermoforming and non critical industrial applications.
Arla Plast AB
ARLA PLAST 2100R - INDUSTRIAL BECAUSE...
Address
Västanavägen
590 30 Borensberg
Sweden
Phone
+46 141 203800
RECYCLING
Fax
+46 141 41430
cater for all possibilities in this area. Our total recycling concept, covering all
types of ABS, will help minimise your material costs.
Internet address
www.arlaplast.com
Available dimensions in delivery programme are preliminary. Contact Arla Plast
AB to check production possibilities for your specific project.
E-Mail
info@arlaplast.se
Please note: Minimum quantities vary by the width requirements and product
options. Special thicknesses and sizes are available upon request. Please contact the local area office for more information.
Stand
Hall 05, B51 (Page 874)
Product Overview
EASY TO THERMOFORMCOST VS PERFORMANCE RATIOOPTIONAL COMBINATION WITH A MATT TOPLAYER > A2100R-INDOPTIONAL UV STABILITYOPTIONAL STRIPE APPLIED
Don’t hesitate to contact the product manager, your local representative or your
Arla Plast contact if you have any questions regarding the opaque products
Arla Plast AB
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
02.01.002
Products made by extrusion
ATECH® 3100
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
THE ABS MATT SERIES REPRESENT A RANGE OF
SUPER MATT FINISH CO-EXTRUDED SHEETS
02.04.001.04
Semi finished products of polycarbonate (PC)
ATECH 3100 with its high impact strength and good thermal properties and
medium stiffnes is very easy to thermoform and fabricate.
ARLA PLAST ATECH 3100-ABS MATT BECAUSE...
WE ARE A WELL ESTABLISHED SUPPLIER OF CUSTOMISED SOLUTIONSSURFACE REMAINS MATT AFTER THERMOFORMING
ATECH 3100- SUPER HIGH IMPACT MATT ABS
© 2014 Messe Düsseldorf GmbH
37
© 2014 Messe Düsseldorf GmbH
38
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
The super matt surface remains matt after thermoforming. More than 80% of all
ABS Matt sheets are used in automotive applications such as interior covers in
trucks, busses, boats and fork-lifters.
APPLICATION AREAS
In general where a high impact strength material is needed such as Machine
covers, high demanding general purpose & indoor applications
MAKROCLEAR® has an outstanding high clarity and surface quality, making it
the best choice for replacing other transparent plastics and glass. The constant
high quality level also helps to improve machining, screen printing and thermoforming.
FIRE PERFORMANCE
ATECH 3103 MATT ABS WITH EXTRA UV PROTECTION
In case of a fire, a MAKROCLEAR® sheet will melt and create a passage where
heat and smoke will be let out of the building. It will have no contribution to the
growth of a fire through flame spread.
As ATECH 3100 + Improved weathering properties.
IMPACT STRENGTH
APPLICATION AREAS
MAKROCLEAR® has more than 10 times the impact strength of high impact
PMMA and more than twice the impact strength of PETG, yet is very easy to
thermoform or cold bend into complex shapes.
Super high impact demanding automotive parts which are exposed to secondary
UV light, and other tough industrial applications where a super matt finish is
required.
RECYCLING
Recycling is a very important part of sheet business. In general, Arla Plast can
offer all possibilities in this field. Our total recycling concept, covering all types
of ABS will help you minimise the material costs. Thanks to our advanced technology and long experience in recycling, off-cuts from ATECH 3100 sheets can
be re-used in new sheet.
APPLICATION AREAS
The fantastic properties of MAKROCLEAR® make it a perfect solution for machine protection, safety glazing, ice hockey rinks, vandal protection etc. MAKROCLEAR® thermoforms very easily and is often used in signs, displays, riot shields,
windows, medical equipment, bicycle helmets etc.
ALSO AVAILABLE IN
Please note: Minimum quantities vary by the width requirements and product
options. Special thicknesses and sizes are available upon request. Please contact the local area office for more information.
MAKROLIFE® (UV protected), MAKROCLEAR FR (Fire Resistant, v(0) for t>2mm),
MAKROCLEAR FA (Food approved) Colorado (Transparent colours), Anti Reflex, Textured Versions (ICE™, TEX™, grain 35)
Don’t hesitate to contact the product manager, your local representative or your
Arla Plast contact if you have any questions regarding the opaque products
MAKROTECH®
02.04.001.04
A RANGE OF COLOURED OPAQUE POLYCARBONATE SHEET
Semi finished products of polycarbonate (PC)
MAKROCLEAR®
MAKROTECH® is based on Arla Plast AB´s long experience of producing PC
sheet in mono, co- and even tri-extrusion. Extremely high impact strength and
high temperature resistance are the main advantages of PC compared to other
thermoplastic materials.
MAKROCLEAR®
AN EXTRUDED HIGH QUALITY TRANSPARENT POLYCARBONATE SHEET THAT HAS SUPERIOR IMPACT
STRENGTH AT A LOW WEIGHT
ARLA PLAST MAKROTECH® BECAUSE...
MAKROCLEAR® is based on Arla Plast AB´s long experience of producing PC
sheet in mono, co- and even tri-extrusion. Extremely high impact strength and
high temperature resistance are the main advantages of PC compared to other
thermoplastic materials.
QUALITY
© 2014 Messe Düsseldorf GmbH
TAILOR-MADE SOLUTIONS FOR YOUR NEEDSLOW MINIMUM QUANTITIES AND FAST DELIVERIESUNIQUE MAKROTECH METALLIC COLOURSLARGEST
PRODUCT RANGE OF OPAQUE POLYCARBONATEHIGH IMPACT STRENGTH
COMBINED TO BE USABLE OVER A WIDE TEMPERATURE RANGE
RECYCLING TRC (TOTAL RECYCLING CONCEPT)
Recycling is a very important part of Arla Plast sheet business and in general
39
© 2014 Messe Düsseldorf GmbH
40
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
we can offer all possibilities in this field. Our total recycling concept, covering
all types of MAKROTECH® will help you minimise the material costs. Off-cuts
from MAKROTECH®‚ sheet can be re-used in new sheet and together with coextrusion of virgin material, all quality requirements can be fulfilled. Please contact Arla Plast for more details.
MAKROTECH® FR
Is a flame retardant coloured polycarbonate sheet. This material contains the
latest halogen free* flame retardant additives. A yellow card on the base material
is available on the UL website, (*according to DIN VDE 472 part 815).
MAKROVISION™
MAKROVISION™
SOLID EXTRUDED HIGH OPTICAL QUALITY TRANSPARENT POLYCARBONATE SHEET THAT HAS SUPERIOR
CLARITY AND IMPACT STRENGTH AT A LOWER WEIGHT
THAN GLASS.
Arla Plast has a unique knowledge to produce metallic colours tailor-made to
the customers need.
MAKROVISION™ has outstanding high transparency and
clarity. The product is designed specifically with optical quality in mind with technical expertise gained over decades of production experience in polycarbonate sheet extrusion at Arla Plast Plast. MAKROVISION™
is now frequently replacing glass and acrylics where optical quality is required
but also in applications where cost saving is required as polycarbonate is half
the weight of glass. The product has very high mechanical and impact resistance too and very good fire performance versus acrylics. The product portfolio
coupled with flexibility and commitment of Arla Plast is well known in the industry. We take pride in ensuring that our customers receive the best service and
support too.
MAKROTECH® MATT DP
QUALITY
is an development product from Arla Plast that retains matt top surface also after
thermoforming. This new product creates new opportunities to use PC where a
matt surface is needed.
MAKROVISION™ has an outstanding high clarity and surface quality, making
it the best choice for replacing other transparent plastics and glass. The constant high quality level and measurement thereof in purpose build laboratories
also helps to produce specific products for window, windscreens and glazing
applications with measured dioptries, etc.
MAKROTECH® UV
is a fully UV-protected coloured polycarbonate sheet that provides new opportunities for the outdoor use of MAKROTECH®. We recommend to use MAKROTECH®
UV for outdoor use.
METALLIC COLOURS
RPC
Is an extruded black polycarbonate sheet for thermoforming. It is a sheet with a
base of regrind material and the same co-extruded top layer as on the MAKROTECH®.
The carbon black itself is a very good UV absorber and protects the material in
outdoor applications. With RPC You will get a product with high impact strength
and high temperature resistance at a very competitive price.
FIRE PERFORMANCE
In case of a fire, a MAKROVISION™ sheet will melt and create a passage where
heat and smoke can be vented or will be let out. It will have no contribution to
the growth of a fire through flame spread.
MAKROTECH® AND RPC WITH STRIPES
IMPACT STRENGTH
is widely used in the heavy packaging industry where an coloured stripe can be
applied to identify the item.
MAKROVISION™ has more than 10 times the impact strength of high impact
PMMA and more than twice the impact strength of PETG, yet is very easy to
thermoform or cold bend into complex shapes.
Please note: Minimum quantities vary by the width requirements and product
options. Special thicknesses and sizes are available upon request. Please contact the local area office for more information.
Don’t hesitate to contact the product manager, your local representative or your
Arla Plast contact if you have any questions regarding the opaque products
© 2014 Messe Düsseldorf GmbH
41
APPLICATION AREAS
The unique properties of MAKROVISION™ makes it a perfect solution for applications where high optical quality is required such as windows, machine protection, safety glazing, ice hockey rinks, vandal protection, soundwalls, laminations,
ballistics protection etc.
© 2014 Messe Düsseldorf GmbH
42
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ALSO AVAILABLE IN
02.03.014
Plastics products and parts for food processing
industry
02.04.001.10
Semi finished products of polyurethane (PUR)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.002
Films
02.05.003
Linings and coatings
02.05.007
Coatings
02.05.049
Boards and vulcanite boards
02.05.050
Parts for pumps
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
02.05.068
Technical films
Rollers and roller coatings
with hardcoat, SAPHIR™ MAKROVISION™
Arthur Habermann GmbH & Co. KG
Address
Wullener Feld 73
58454 Witten
Germany
Phone
+49 2302 6606189
Fax
+49 2302 6606698800
Internet address
www.hawiflex.de
E-Mail
hawiflex@habermann-gmbh.de
Stand
Hall 08a, B41 (Page 894)
Product Overview
Arthur Habermann GmbH & Co. KG
01.14.022
Trowelling compounds
02.05.076
01.14.024
Composite materials
Product Details
02.03.003
Plastics products and parts for building applications
02.03.011
Plastics products and parts for mechanical engineering
02.03.003
Arthur Habermann GmbH & Co. KG
Plastics products and parts for building applications
Mixer Spare Parts in ”Original Hawiflex®”
HABERMANN –
The original is Your trump!
With its Mixer Technology division
HABERMANN is a major pioneering company
for the development of mixer tools for concrete mixers.
© 2014 Messe Düsseldorf GmbH
43
© 2014 Messe Düsseldorf GmbH
44
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
for ring-pan mixers, single and double shaft
With the introduction of the original brand
mixers and planetary countercurrent mixers.
Hawiflex® more than 40 years ago,
Your mixer tools:
HABERMANN established the brown mixing
durable and light: Hawiflex®!
blades at numerous concrete plants in
Concrete wear parts
Germany, Europe and beyond Europe’s
- Paddles
borders.
- Blades
All parts have the label Original Hawiflex®.
- Scrapers
Our brand has often been copied in
- Floor scrapers
accordance with the misleading motto of
- Arm guards -
”all browns are the same”. Yet, we have
Stirrers made of wear resistant Hawiflex®
been able to further extend our technological
02.03.011
advantage and to strengthen our market-
Plastics products and parts for mechanical engineering
Hawiflex® for mechanical engineering
leading position.
In order to ensure the short-term security of
Reducing maintenance costs
supply to the customers, the articles are
Ruhr.
Hawiflex® is an intelligent modular system for materials that has been permanently refined and which offers
design engineers and technicians in the field of mechanical engineering a wide
range of solutions for small, medium and large numbers of pieces. There are
a large number of special formulations available for the various requirements.
Applications that require high levels of physical and chemical resistance can be
fulfilled with Hawiflex®.
Since the 1970s, HABERMANN products
Hawiflex® is used in almost all industries today, e.g. in the following sectors:
have been successfully used in ready-mixed
- Pump construction
concrete plants, precast concrete plants, in
- Mechanical engineering
the production of concrete blocks, concrete
- Plant construction
pipe production and in the roof tile industry.
- Recycling
The HABERMANN wear protection solutions
- Agricultural technology
offer great benefits at affordable costs.
- Vehicle construction
stocked by main dealers in many European
countries. The main dealers are supplied
from our large main warehouse in Witten/
Therefore, a major focus of our supply
- Textile industry
range is on mixer tools for virtually all
- Plastic production
common makes of concrete mixing plants.
- Bulk goods industry
The extensive spare parts range is available
© 2014 Messe Düsseldorf GmbH
45
© 2014 Messe Düsseldorf GmbH
46
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- Materials handling technology
02.04.002
- Wood industry
Films
Foils and Sheets
- Printing and paper industry
- Construction industry
Hawiflex® Sheets for wear protection
- Shipbuilding
Hawiflex® – Sheets are very versatile.
- Navy
Hawiflex® provides noise reduction and protects as a
lining: chutes, troughs, funnels, bunkers, silos, mixers,
slides, buckets, loading areas, side walls and floor lining.
02.03.014
Plastics products and parts for food processing industry
Hawiflex suitable for food applications
The boards are used in the bulk material industry, plant construction, maintenance, sand and gravel excavation and the concrete industry, amongst others
Habermann also offers materials suitable for contact with dry and wet food.
02.04.001.14
other and machined semi finished products / Pre-cut
parts
The shaping of ideas
The boards can be supplied with the dimensions 3,000 x 1,000 mm and 2,000 x
1,000 mm with a thickness between 1 and 50 mm. For use in wear protection,
selecting the Shore hardness is an important criterion. The Hawiflex® standard
board can be optimised to the respective application by adjusting its hardness
in the range from 55° Shore A to 90° Shore A.
The Hawiflex® standard wear protection boards can be produced in any size
and shape in accordance with your instructions or drawings.
High-quality moulded parts: with our casting technology
we are able to produce inexpensive casts of small and
large numbers of pieces from simple casting moulds.
The product characteristics defined during the planning
process are also specifically co-ordinated by means of
raw material variations.
02.05.003
Linings and coatings
Function sheet for glue connections
It goes without saying that after a technical check it is possible to produce
moulded parts and coatings from casting moulds provided by you.
With our modern machinery we can create strong connections with metallic and
non-metallic materials – even in the case of complex shapes and component
sizes.
With our crane systems we can move total weights (metal parts, polyurethane
and casting tools) of up to 20 tonnes.
The Hawiflex® function sheet – two sides of functionality
Hawiflex® with functional layer (separation layer / insulation layer) is a system consisting of two materials
in which the front and rear side fulfil two different functions.
The wear-resistant front consists of our material Hawiflex®, which has been successfully used on the market for many years.
The back of the Hawiflex® function board is furnished with a special layer which
is suitable for adhering to machine components and systems subject to high
levels of wear.
Simply glued – simply renewed
The separation layer provides a perfect bond between the component and the
Hawiflex® system.
© 2014 Messe Düsseldorf GmbH
47
© 2014 Messe Düsseldorf GmbH
48
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
A further advantage is the predetermined breaking point defined in this layer,
which makes the subsequent removal of the old covering easy.
Due to the predetermined breaking point a thin residual covering of the separation layer remains on the component (substrate), to which a new Hawiflex®
function board can be immediately adhered without any complicated processing
of the subsurface.
Advantages:
users themselves.
Hawiflex® sprayed – a genuine alternative to rubber lining
Spraying is a method which is ideal for the production of large-area coatings.
Advantages:
- no seams or joints
- liquid-proof
- highly wear-resistant
- targeted application in the area of wear
- single substrate treatment (cleaning, blasting, degreasing, drying)
- variable layer thicknesses
- simple assembly through gluing with contact adhesive
- good non-stick properties
- adapts readily to modular lining systems for large surfaces (diamond, rhombus,
- shorter cleaning times
honeycomb)
- effective against caking
- simple detachment due to the separation layer
- structured surfaces on request
- cost savings
- noise protection
- reduced environmental pollution
- sound-dampening effect
- sound insulation and attenuation due to the thicker separation layer
- outstanding abrasion resistance
- various laying technique possible
- high chemical resistance
02.05.007
- good corrosion resistance
Coatings
- very good sliding properties
Casting or spraying
- no mould costs
Coatings – for different requirement profiles
- ideal for prototypes
Our materials are widely used for coatings for small and
large areas, primarily in the wear protection sector. The
tasks of these coatings vary greatly and essentially consist of
Coatings for:
- anti-adhesion
- chutes
- noise reduction
- rollers
- resistance to high abrasion levels
- drums
- resistance to UV radiation
- crushers
- microbial resistance
- top rollers
Depending on the application, our manufacturing processes mean that it is possible to carry out the coating at our works, but also on your premises. A major
advantage of the coatings applied on site is that they can be carried out by the
- screw conveyors
© 2014 Messe Düsseldorf GmbH
- channels
- slides
49
- mills
© 2014 Messe Düsseldorf GmbH
50
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- containers
fitting the sheet to the existing component geometry. The sheet with expanded
metal is ideally used as wear protection for the conical and oval components
e.g. funnels and chutes.
- pipes
- concrete buckets
- mixers
02.05.050
- cables
Hawiflex® in Habermann Pumps
- fenders
Pumps range
- buoys
HABERMANN - your professional partner
- pump parts
At home for decades in all areas of industry.
- vehicle parts
Habermann armoured pumps are synonymous with long service lives and low
life cycle costs. The quality is confirmed by ISO certification. Service and customer proximity are not alien concepts for Habermann, but rather the practised
corporate philosophy. Habermann armoured pumps are primarily used where
abrasive or abrasive/corrosive media are pumped.
- agitators
- cyclones
Hawiflex® cast – material selection according to use
Parts for pumps
The special feature of this method is that the coatings fulfil high demands with
respect to dimensional accuracy, long service lives and reproducibility.
Two product lines are available:
As a result, our high-quality Hawiflex® coatings offer clear advantages in the
casting process compared to conventional coating techniques.
HPK corrosive media and light to heavy wear
The significant advantages with respect to service life which are usually achieved
are explained by the fact that in the casting process we can access our wide
range of materials. This means that the material selected is ideal for the respective application.
02.05.049
Boards and vulcanite boards
Pumps lined with Hawiflex®:
Metallic pumps*:
NPW light to medium wear
NPK medium to heavy wear
KB/KBK/KBPL heavy wear
*All machines can also be used for corrosive media
02.05.065
Sheets with perforated metal plate and expanded
metal sheet
Pressed parts in accordance with sample, drawing or
customer’s tools
Sheets with perforated metal plate
Mould construction – advantages through modern
processes
The perforated metal plate cast into the Hawiflex plate
allows simple attachment, e.g. using bolts and reduces
elongation and shrinking to a minimum. The design
stiffness of the plates makes it possible to reduce the need for expensive plate
structures and to a cheaper, frame like structure.
The decisions taken in the planning meetings are implemented in the first step with the creation of the mould
design.
The sheets can easily be cut to size and drilled onsite.
Modern design and manufacturing processes enable inexpensive mould construction for small and medium series in particular.
Sheets with expanded metal
You can also assemble these sheets with screw connections. Compared to the
perforated metal sheets, the cast-in expanded metal offers the option of optimally
© 2014 Messe Düsseldorf GmbH
51
© 2014 Messe Düsseldorf GmbH
52
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.076
Arzuffi S.r.l. - High Vacuum Systems
Rollers and roller coatings
Roller Coating - high resilience and wear protection
Roller
Address
Via Belvedere, 26
20862 Arcore / MI
Italy
On the basis of our extensive experience we have been
able to develop special formulations for requirements
that involve high demands with respect to dynamic loads and wear resilience
with excellent recovery behaviour.
Phone
+39 039 6012626
Fax
+39 039 6201973
For roller covers we supply co-ordinated formulations in the hardness range from
55° to 95° Shore A. Furthermore, we offer products of a special quality for use
under elevated thermal conditions, as well as excellent hydrolytic stability.
Internet address
www.arzuffisrl.it
E-Mail
info@arzuffisrl.it
Stand
Hall 04, E06 (Page 870)
Rollers – Coatings – Covers – Repairs
Raw material systems which take into consideration the functions of a highquality roller cover have also been developed for the special requirements in
the coal, steel and aluminium industry.
Considerably longer service lives are achieved compared to rubber-lined rollers.
Our capacities:
Company News
up to 2,500 mm diameter
07/12/2013
Arzuffi S.r.l. - High Vacuum Systems
NEW ARZUFFI BUILDING
up to 3,500 mm length
We’re moving in a new bigger building into Milano area
where our production’d be improved till three times the
actual.
up to 10,000 kg unit weight
You’ll be welcome:visit our Company, test your products in our vacuum coating machines, taste the excellence of our technologies.
Our great experience is your success supplying quality products to your Customers.
© 2014 Messe Düsseldorf GmbH
53
© 2014 Messe Düsseldorf GmbH
54
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Product Overview
August Herzog Maschinenfabrik GmbH & Co. KG
Arzuffi S.r.l. - High Vacuum Systems
02.01.006
02.02.001
Vapour-deposit decorating
02.05.044
Metalised parts
Parts made by mechanical treating
Our Products
02.05.047
Surface treated and decorated parts
Apart from the traditional application in the rope making and
the textile industry, braids nowadays have a wide field of use
in most varied areas.
03.04.007
Metallizing plant (vacuum deposition)
A lot of different applications require innovative solutions
and specific machines.
Automotive:
August Herzog Maschinenfabrik GmbH & Co. KG
Address
Hollow tubes braided of monofilaments are used as assembly help when installing electrical wiring during car manufacturing. Overbraided
flexible hoses are used for hydraulics, compressed air or hot fluids. After the
braiding process either rubber or plastic is extruded over the braid.
Am Alexanderhaus 160
26127 Oldenburg/Oldb.
Germany
Electrical industry:
Electrical or telecommunication cables are overbraided and hollow glass fiber
tubes (impregnated) are used for heat or electrical insulation.
Phone
+49 441 3008-0
Fax
+49 441 3008-100
Internet address
www.herzog-online.com
In these industries our machines are more and more used to process composites. Round and flat braids but also overbraiding with 2.5D or 3D is used in this
field.
E-Mail
info@herzog-online.com
Medical technique:
Stand
Hall 03, G62 (Page 868)
Finest braids are used for surgical sewing threads, catheters or stents made of
wire.
Product Overview
Aviation, automotive and aerospace technology:
August Herzog Maschinenfabrik GmbH & Co. KG
02.01.006
Parts made by mechanical treating
02.05.058
Hoses
02.05.060
Cords
02.05.075.02
Other fibre-reinforced plastic parts
© 2014 Messe Düsseldorf GmbH
55
© 2014 Messe Düsseldorf GmbH
56
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Baoding Lida Plastic Industry Co., Ltd.
Very good welding and processing properties;
Address
No. 2222 South of the Second Ring Road
071000 Baoding City, Hebei
China, People’s Republic of
Excellent impact strength;
Excellent chemical and corrosion resistance;
Excellent formability;
Phone
+86 312 5381085
Fax
+86 312 5381020
Good abrasion resistance and electrical properties;
Light weight, non-toxic.
Applications:
Internet address
www.ldsy.cn
E-Mail
lidaplastic@ldsy.cn
Stand
Hall 08b, F24-11 (Page 890)
Product Overview
PP rigid sheet with high impact strength and superior strength and it’s lower
susceptibility to tension cracks are widely used for chemical, mechanical and
electronic industry, e.g. tanks, Lab equipments, Etching equipments, Semiconductor processing equipments, Plating Barrels, machined parts, industrial doors,
swimming pools and so on.
Baoding Lida Plastic Industry Co., Ltd.
Baris Ambalaj Matbaacilik San. ve Tic. Ltd. Sti.
Address
Orhan Alpyoruk Cad. 12, Yazibasi
35875 Izmir
Turkey
Phone
+90 232 8539039-120
pp sheet
Fax
+90 232 8539453
Sizes:
Internet address
www.barisambalaj.net
E-Mail
info@barisambalaj.net
Stand
Hall 07.2, G23 (Page 888)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
Product Details
02.04.001.11
Baoding Lida Plastic Industry Co., Ltd.
Semi finished products of polyvinylchloride (PVC)
Thickness range: 2mm~30mm
Width: 2mm~20mm: 1000mm~1500mm
25mm~30mm: 1000mm~1300mm
Length: Any length.
Surface: glossy.
Standard Colors:
Natural, grey (RAL7032), black, light blue, yellow and any other colors according
to customers’ requirements.
Characteristics:
© 2014 Messe Düsseldorf GmbH
57
© 2014 Messe Düsseldorf GmbH
58
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
Baris Ambalaj Matbaacilik San. ve Tic. Ltd. Sti.
Product Overview
Bekaert Advanced Filtration SA/NV
01.14.002
Decorative films
01.11.023
Metal powder
02.02.003
Printing
02.05.020
Filters and parts
03.04.008
Equipment for In-Mould Decoration (IMD)
03.01.006
Screen changers
03.01.007
Melt filters
03.08.010
Mould and die cleaning equipment
Product Details
02.02.003
Baris Ambalaj Matbaacilik San. ve Tic. Ltd. Sti.
Printing
IML Labels
Printing on 50mic- 200mic plastic material such as PP, BOPP, CAST, PE, PVC,
PET, HDPE, LDPE, PVC, PS etc. with waterbased inks and/or UV inks.
We print on 106 x 76 cm sizesi therefore it is possible to produce labels for
biggest (25- 30 Liter or 25-30 Kg. Pails/Buckets.
Rue de Cornémont 9-11
4141 Sprimont
Belgium
Phone
+32 4 3609465
Fax
+32 4 3609477
Internet address
www.bekaert.com
E-Mail
bafinfo@bekaert.com
Stand
Hall 09, C60 (Page 898)
02.05.020
Bekaert Advanced Filtration SA/NV
Filters and parts
Bekaert Optisupport®
Bekaert Optisupport® is a support and distribution system that
can be installed between the filter and the breaker plate. Its
device structure creates a 95% open area and eliminates all
deadzones. This leads to a reduced consumption of filters, a
better distribution of the polymer and an improved quality of the
filtered products.
Bekaert Advanced Filtration SA/NV
Address
Product Details
Filter candles
Whether your filtration process requires them to be
flat wrapped or pleated, crimped or bonded, Bekaert
custom-made candle designs are highly adaptable in
terms of shape, size, design, layout and position. Our
wide range of metallic media offers excellent filtration
rates ranging making them particularly suitable for high
pressure and high polymer viscosity processes.
Leaf discs
© 2014 Messe Düsseldorf GmbH
Bekaert leaf discs are tailor-made to achieve the best possible polymer melt
quality. In close cooperation with the customer, Bekaert matches the shape,
dimension and media to meet the exact requirements. A stack of filter discs
59
© 2014 Messe Düsseldorf GmbH
60
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
can also be an excellent alternative for filter candles for applications where fine
filtration is linked to high operating pressures.
Removable mesh pack
Bekaert Removable Mesh Pack® is an original patented
filter candle design that can be dismantled allowing an
easy removal, cleaning and replacement. This system
enables you to significantly reduce your incineration or
landfill costs and help you to save up to 30% on total
filtration costs. The separate parts of the Mesh Pack® are secured with a metal
sealing that provides 100% security down to 5 μm.
Product Overview
Bekaert Fiber Technologies
01.01.023
Electrically conductive plastics
01.12.012
Metal fibres
02.05.020
Filters and parts
03.01.007
Melt filters
Product Details
02.05.020
Bekaert Fiber Technologies
Address
Bekaertstraat 2
8550 Zwevegem
Belgium
Phone
+32 56 766537
Fax
+32 56 767966
Bekaert Fiber Technologies
Filters and parts
Bekaert Optisupport®
Bekaert Optisupport® is a support and distribution system that
can be installed between the filter and the breaker plate. Its
device structure creates a 95% open area and eliminates all
deadzones. This leads to a reduced consumption of filters, a
better distribution of the polymer and an improved quality of the
filtered products.
Filter candles
Internet address
www.bekaert.com/bft
E-Mail
btfinfo@bekaert.com
Stand
Hall 09, C60 (Page 898)
Whether your filtration process requires them to be
flat wrapped or pleated, crimped or bonded, Bekaert
custom-made candle designs are highly adaptable in
terms of shape, size, design, layout and position. Our
wide range of metallic media offers excellent filtration
rates ranging making them particularly suitable for high
pressure and high polymer viscosity processes.
Leaf discs
Bekaert leaf discs are tailor-made to achieve the best
possible polymer melt quality. In close cooperation with
the customer, Bekaert matches the shape, dimension
and media to meet the exact requirements. A stack of
filter discs can also be an excellent alternative for filter
© 2014 Messe Düsseldorf GmbH
61
© 2014 Messe Düsseldorf GmbH
62
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
candles for applications where fine filtration is linked to
high operating pressures.
Product Overview
BEN Kunststoffe GmbH
02.01.002
Products made by extrusion
02.01.004
Products made by calendaring
02.01.006
Parts made by mechanical treating
02.02.001
Vapour-deposit decorating
02.02.002
Galvanization
02.02.003
Printing
Hinterweiler Str. 20
72810 Gomaringen
Germany
02.02.005
Welding
02.03.001
Plastics products and parts for plant building
Phone
+49 7072 918787
02.03.002
Plastics products and parts for automotive
Fax
+49 7072 918750
02.03.003
Plastics products and parts for building applications
Internet address
www.ben-plastic.com
02.03.004
Plastics products and parts for office equipment/
promotion
E-Mail
info@ben-plastic.com
02.03.005
Plastics products and parts for household/consumer
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
Removable mesh pack
Bekaert Removable Mesh Pack® is an original patented
filter candle design that can be dismantled allowing an
easy removal, cleaning and replacement. This system
enables you to significantly reduce your incineration or
landfill costs and help you to save up to 30% on total
filtration costs. The separate parts of the Mesh Pack® are secured with a metal
sealing that provides 100% security down to 5 μm.
BEN Kunststoffe GmbH
Address
Stand
Hall 08b, E83 (Page 890)
© 2014 Messe Düsseldorf GmbH
63
© 2014 Messe Düsseldorf GmbH
64
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
· very good electrical insulating properties
· according to BGA recommendation IX
· for storage of food certified
· physiologically safe
· suitably for contact with drinking water
· normally inflammable DIN 4102-B2
02.03.015
Plastics products and parts for transport/packaging
02.04.001.07
02.03.016
Plastics products and parts for optics/precision
engineering
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
Semi finished products of polypropylene (PP)
PP (Polypropylene)- sheets *extruded
characteristics:Generally:
- heat-stabilized
- water-resistant
- increased mechanical properties
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
- ductile when warm
- very good welding
Product Details
02.04.001.05
BEN Kunststoffe GmbH
Semi finished products of polyethylene (PE)
- small specific weight
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
PVC-Freefoam-sheets
PVC-Freefoam-sheets in different dimensions, colours and surfaces
PE-sheets (Polyethylene) *extruded
characteristics:
· high chemical stability
· good in thermoforming
· good impact strength
· impact resistant also at low temperatures
· small specific weight
· well welding
· well warmly ductile
· water-resistant
© 2014 Messe Düsseldorf GmbH
65
© 2014 Messe Düsseldorf GmbH
66
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
and V-0). The listings (for plastic materials) are published in the ”UL Recognized Components Directory,” Volume II, Section QMFZ2, under the heading
“Plastics.”
BIEGLO GmbH
Address
Ballindamm 15
20095 Hamburg
Germany
UL testing is important and valuable to end users of the material so they can
determine the suitability of specific applications as well as save time and cost by
eliminating the need for additional testing. As part of the Seals Group’s annual
safety standards and material diligence testing, their Meldin® manufacturing site
in Bristol, Rhode Island, is audited by a UL representative followed by material
testing at their lab per UL 94 requirements. Their other grades, Meldin® 7021,
7022, and 7211 (filled polyimides), have also passed UL 94 testing with V-0 and
5VA ratings.
Phone
Fax
Internet address
www.bieglo.com
E-Mail
info@bieglo.com
Stand
Hall 08b, E65 (Page 890)
Company News
08/31/2013
The Meldin® 7000 series have been qualified for numerous industry- as well as
customer-specifications. This product line has been known to consistently perform in challenging applications ranging from aircraft and launch vehicle parts,
automotive components to semiconductor equipment parts.
BIEGLO GmbH
BIEGLO is a Hamburg distribution-group that is growing by expanding their sales
of advanced technical materials and by targeting acquisitions of existing distribution companies in Europe under the motto of ’High-Performance Distribution’.
Meldin® 7000 passes UL94 again says Distributor
BIEGLO
Saint-Gobain Seals Group’s Meldin® 7001 Thermoset
Material passes UL 94 Flammability Tests 5VA and V-0
reports BIEGLO,
www.bieglo.com
K-fair 2013 Hall 8b / E65
BIEGLO, the German distributor for Meldin®7000 polyimide products
08/06/2013
Saint-Gobain Seals Group’s Meldin® 7001(unfilled polyimide) thermoset material, which is part of their Meldin® 7000 series product line, has passed the UL
94 standard from Underwriters Laboratories, Inc. (UL), a global independent
safety science company, which covers tests for flammability of plastic materials.
Vertical burning tests were conducted on the Meldin® 7001 material to measure
its flammability characteristics. This testing program determines the material’s
tendency to extinguish or spread the flame once the material is ignited.
UL 94 includes 12 flame classifications based on the results of small-scale flame
tests. The Meldin® 7001 grade is incorporated into the six classifications where
materials are commonly used in manufacturing enclosures, structural parts and
insulators and has been UL listed with a “Plastic Recognition Yellow Card” (5VA
© 2014 Messe Düsseldorf GmbH
The Meldin® 7000 product line will be featured at the K trade Fair 2013 in Düsseldorf, Germany from October 16-23. The Seals Group will be exhibiting with
other Saint-Gobain businesses in Hall 8A / H33 For more information on the
Seals Group’s Meldin® 7000 thermoset materials, their other polymer and sealing solutions or the K show, please visit www.seals.saint-gobain.com
67
CoPEEK & Meldin® 7000
BIEGLO High Performance Distribution on the International Trade Fair for Plastics and Rubber “K 2013”.
The BIEGLO GmbH, known for their distribution of
high-performance products, is going to exhibit on the
fair K 2013 in Düsseldorf from October 16th to 23th.
To foster polymer sales in this growth market BIEGLO
focus will be put on the high-temperature polymers
CoPEEK from Panjin Zhongrun and Meldin® 7000, a polyimide from SaintGobain Performance Plastics. CoPEEK, appropriate for high-end products due
to its unique combination of high chemical and temperature resistance with outstanding strength and stiffness and low friction rates, can be delivered in form
© 2014 Messe Düsseldorf GmbH
68
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
of granules, powder, films and semi-finished shapes. This material can replace
metal and has lower weight and the ability to be recycled. A proof of this ability is the increasing use of CoPEEK as replacement for metals in demanding
application. The newest development in the sector of low abrasion materials is
presented with a chemically bonded CoPEEK-PTFE compound. The homogeneous morphology of this patented polymer leads to extraordinary low friction
and abrasion rates over an extended loading time.
01.01.070
Polyetheretherketone (PEEK)
01.01.116
Reclaimed material
01.03.015
High performance composite materials as
semi-finished ware,adhesive films, primer
With Meldin® 7000, BIEGLO will present the top of high-performance polymers
in form of semifinished products. Meldin® 7000 is a qualified series of hightemperature polymers, which fulfill the utmost demands of wear and dimensional
stability by keeping its high stiffness and strength.
01.10.028
Fire protection agents
01.10.078
Microbicides
01.10.126
Plasticiser
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.068
Technical films
02.05.069
Parts of industrial laminates
02.05.074
Composite boards
03.06.005
Hotrunner systems
Meldin® enables to realize applications, which resist temperatures up to more
than 400C for a short term and over 300C over a long term period – an endurability that has only been met by metals so far. Compared to metals, Meldin® has
the great advantage of being much lighter, providing weight savings between 60
and 80%. Meldin® 7000’s flammability is rated V-0, 5VA per UL-94.
BIEGLO will also present the chemically resistive family of long-chained polyamides
from Shandong Dongchen.
Product Overview
BIEGLO GmbH
01.01.001
Acetal homo and copolymers (POM)
01.01.005
Acrylonitrile/butadiene/styrene copolymers
01.01.010.05
Polyamide
01.01.019
Copolyester TPE-O, COPE
01.01.047
Polyamide PA 12
01.01.050
Polyamide PA 610
01.01.051
Polyamide PA 612
Product Details
02.04.001.13
© 2014 Messe Düsseldorf GmbH
BIEGLO GmbH
Semi-finished parts/products
reinforced plastics
made
from
fibre-
PEEK CoPEEK Composites
CoPEEK is the most performing thermoplastic matrixmaterial. Thermoplastic composites perform very well
in numerous applications in different industries where
the superiority against the thermoset composites had
been proven in respect of
69
© 2014 Messe Düsseldorf GmbH
70
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
faster production time for small and middle sized parts less brittleness and higher
impact resistance the ability to be simply reshaped and reformed by heat ecological and economic advantages in recycling of composite parts.
Thermoset composite parts have to be shredded – parts with a thermoplastic
matrix can be divided varietal and their components can be reused. Thus, sustainability is ensured by using thermoplastic matrices in composites.
BIEGLO is offering solutions to material-questions by using the most advanced
polymer materials whilst co-operating with world-market leaders as suppliers
the modern processes of the composite production.
CoPEEK is a Polyether-Ether Ketone (PEEK) produced by Chemerize Panjin
Zhongrun High Performance Polymers Ltd., the leading Chinese High Performance Polymer Producer.
BIEGLO founded by John Biesterfeld is offering solutions to material-questions
by using the most advanced polymer materials whilst co-operating with worldmarket leaders as suppliers.
02.05.074
02.04.003.03
Composite boards
Parts from high performance thermoplastics
CELLWOOD Sustainable wood-replacement
Polyimide MELDIN®
CELLWOOD has been invented as a more environmentally
friendly building material than pure wood. It is mostly used
in form of sheets or profiles for outdoor deck floors, furniture,
frames or railings.
The BIEGLO GmbH offers Europe-wide high-performance
polymers. The newest member in our family is the
polyimide Meldin® 7000 from Saint –Gobain. Meldin®
7000 is a qualified series of high-temperature polymers,
which fulfill the utmost demands of wear and dimensional stability by keeping its high stiffness and strength.
Meldin® enables to realize applications, which resist temperatures up to more
than 400C for a short term and over 300C over a long term period – an endurability that has only been met by metals so far. Compared to metals, Meldin® has
the great advantage of being much lighter, providing weight savings between 60
and 80%.
Meldin® 7000’s flammability is rated V-0, 5VA per UL-94 similar to Vespel®
which is a brand name of durable high-performance polyimide-based plastics
manufactured by DuPont.
BIEGLO founded by John Biesterfeld is offering solutions to material-questions
by using the most advanced polymer materials whilst co-operating with worldmarket leaders as suppliers.
02.05.068
On behalf of the Taiwanese company Microcell, the BIEGLO
GmbH distributes European-wide the wood-like polymer CELLWOOD , which avoids all the disadvantages, which WPC materials still possess.
CELLWOOD is a 100% thermoplastic elastomer (TPE) with an integrated foaming system, which offers a closed microcell structure.
The sustainability derives from:
- Less use of natural wood
- Longer lifetime of the parts
- The recyclability, depending from the usage of the polymers and adhesives
- No need to post-color
This unique material leads to the following advantages versus WPC:
- A wood-like density of 0,6-0,7 gr/ccm
Technical films
- No water permeability
PEEK CoPEEK Film
- 100% recyclability of the CELLWOOD parts
- No fungal or mildew attack
CoPEEK-Film supplied by BIEGLO is based on pure
CoPEEK. It is available in thicknesses between 10 to
800μm with same performance as pure PEEK.
- Anti-slippage characteristic in moisture surrounding
- A wood-like appearance if extruded, due to the wood vein texture
The film has a light color and high purity for many new
developments in the aviation/aerospace industry and
© 2014 Messe Düsseldorf GmbH
- Anti-oxidation and UV stabilization
71
© 2014 Messe Düsseldorf GmbH
72
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
The eco-friendly CELLWOOD does not warp or splinter and is certificated according to RoHS and REACH.
Due to its outstanding properties and easy processability, CELLWOOD can be
employed in a greater variety of applications as shoes, household goods and
toys.
BIEGLO offers CELLWOOD in form of granules as well as ready-extruded sheets
and profiles with various wooden-patterns printed up-on.
BIW Isolierstoffe GmbH
Address
Pregelstr. 5
58256 Ennepetal
Germany
Phone
+49 2333 8308-0
Fax
+49 2333 8308-10
Internet address
www.biw.de
E-Mail
info@biw.de
Stand
Hall 06, A33 (Page 878)
BIEGLO exhibits at the K´13 in hall 8b on booth E65.
Contact details:
Bieglo GmbH
Ballindamm 15
20095 Hamburg
Tel: +49 40 31975582
www.bieglo.com
PEEK CoPEEK Composites
Product Overview
CoPEEK is the most performing thermoplastic matrixmaterial. Thermoplastic composites perform very well
in numerous applications in different industries where
the superiority against the thermoset composites had
been proven in respect of
faster production time for small and middle sized parts less brittleness and higher
impact resistance the ability to be simply reshaped and reformed by heat ecological and economic advantages in recycling of composite parts
Thermoset composite parts have to be shredded – parts with a thermoplastic
matrix can be divided varietal and their components can be reused. Thus, sustainability is ensured by using thermoplastic matrices in composites.
BIEGLO founded by John Biesterfeld is offering solutions to material-questions
by using the most advanced polymer materials whilst co-operating with worldmarket leaders as suppliers.
© 2014 Messe Düsseldorf GmbH
73
BIW Isolierstoffe GmbH
01.12.026
Textile glass fabric
02.01.002
Products made by extrusion
02.01.009
Parts made by foaming
02.01.010
Parts made by injection moulding
Product Details
02.01.002
BIW Isolierstoffe GmbH
Products made by extrusion
Silicone-Co-Extrudates
© 2014 Messe Düsseldorf GmbH
74
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Silicone-Pressure-Hoses
Blik 99 Ltd
Silicone-Extrudates
02.01.009
Address
Pokrovnishko shose Str.
2700 Blagoevgrad
Bulgaria
Phone
+359 73 881627
Fax
+359 73 881627
Internet address
www.blik99-bg.com
E-Mail
office@blik99-bg.com
Stand
Hall 08b, A84 (Page 890)
Parts made by foaming
Silicone-Foam-Extrudates
Product Overview
02.01.010
Parts made by injection moulding
Blik 99 Ltd
02.04.001.10
Semi finished products of polyurethane (PUR)
02.05.028
Rubber / plastics / metal combinations
02.05.050
Parts for pumps
02.05.076
Rollers and roller coatings
2K-parts
Product Details
Silicone-Mouldings
02.04.001.10
Blik 99 Ltd
Semi finished products of polyurethane (PUR)
Linings
© 2014 Messe Düsseldorf GmbH
75
© 2014 Messe Düsseldorf GmbH
76
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Plates
Feed rollers
Plates and linings in combination metal,cast PU and
DESMOPAN
Flexible linings
Special profiles
Flexible pads
Tubes
02.05.050
Parts for pumps
Hydrocyclones
02.05.028
Rubber / plastics / metal combinations
Driving wheels
Polyurethane screens
© 2014 Messe Düsseldorf GmbH
77
© 2014 Messe Düsseldorf GmbH
78
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Spare parts for flotation machines
Transport wheels
Spare rotors and stators for pumps
Bluhm Systeme GmbH
Address
Maarweg 33
53619 Rheinbreitbach
Germany
Phone
+49 2224 7708-0
Fax
+49 2224 7708-20
Internet address
www.bluhmsysteme.com
E-Mail
info@bluhmsysteme.com
Stand
Hall 04, E47 (Page 870)
Vanes for pumps
02.05.076
Rollers and roller coatings
Rollers for textile,cigarette packing and conveyor
machines
Product Overview
Rollers produced by the method of rotational casting
© 2014 Messe Düsseldorf GmbH
79
Bluhm Systeme GmbH
02.02.003
Printing
02.02.004
Type printing
03.04.001
Printing equipment for plastic and rubber products
03.04.002
Marking equipment
© 2014 Messe Düsseldorf GmbH
80
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.02.003
Bluhm Systeme GmbH
Printing
Thermal transfer printer
Thermal transfer printer for long-lasting results
Printing with thermal transfer technology delivers long-lasting
prints in different colours on a wide range of materials, i.e. paper, plastic, metal or ceramic. In this printing process the colour
is taken from a coated ribbon of polyester by melting it and
pressing it onto the printable surface. The result is a top quality print, that will last much longer than direct thermal or inkjet
printing. Depending on which sort of transfer ribbon is used, these printings
can survive environmental challenges like extreme temperatures, humidity and
other chemical and physical influences. Weber-Marking provides different thermal transfer printer systems from Weber’s own line, Zebra and Datamax, as well
as printer ribbons, labelling software and labelling system accessories.
Challenges for thermal transfer printers
An automatic labelling machine that uses thermal transfer technology can reach
speeds of 14 inches per second and typically provides resolutions from 203 up
to 600 dots per inch (DPI). The transfer ribbons, called foil, can be coated with
a colour medium based on wax, resin or a wax-resin-mixture. Wax-based prints
are mostly used on paper and can last a year when kept dry and free from
abrasive or chemically dissolving environments. Printings made with wax-resinribbon-ink on paper produce a finer and more durable image which is able to
resist at least slight water contact. Pure resin ink is suitable for prints onto plastic labels, where they become extremely durable. Resin transfer ribbons can
also be used for thermal prints onto other surfaces, where a label needs to last
for a longer time or needs to resist extreme environments.
Permanent prints produced by a thermal transfer printer are able to avoid fading
even when exposed to direct sunlight over a longer period. The durability of resin
based transfer prints includes scratch and water resistance and even resistance
to many chemicals. The variety of label materials is much larger than for direct
thermal printing, containing even cloth and many synthetic materials as well as
coated paper. There is also a much greater choice of adhesives for thermal
transfer printer labels made for extreme temperatures from -196 to + 575°C.
care as an example, thermal transfer printings prove their reliability in many
ways. Bar code labels used in hospitals and laboratories contain critical information that needs to remain scanable due to different conditions like cleaning
solvents or autoclave treatment. Labels that are marked with a thermal transfer
printer will assure the identification of patients, medication, medical devices or
blood bags.
Weber Marking Systems provides a wide range of thermal transfer printer models for different purposes: economical models for printing low volumes, or high
performance models, as well as different web units for greater flexibility. High
printing speeds are achieved powerful processors and extra capacious memories that allow to produce the label image and to print at the same time.
Labelling with thermal transfer technologies by Weber Marking
Weber Marking offers a variety of label printers for UK suitable for nearly every business and industry. Our thermal transfer printer series accommodates
a variety of label sizes and materials, some of them upgradable with RFID. All
popular bar code symbol systems are supported by our labelling software solutions. Additionally we keep in stock a wide range of black and coloured ribbons
for thermal transfer printing. Each of them is equipped with a silicon coating to
protect the print head against excessive wear.
02.02.004
Type printing
Drop-On-Demand inkjet printers
Innovative coding systems
Innovative coding systems for coding of products and
packaging have been developed in close cooperation with our customers and
produced under the name Markoprint for more than 40 years. With the different
control units of the Markoprint product range, BluhmWeber is the only manufacturer worldwide able to centrally control three printing technologies. In addition
to the HEWLETT PACKARD printheads for small high resolution coding and
the proven TRIDENT printheads for large coding, newly developed LEXMARK
industrial printheads are also now supported. Be it Windows control systems,
high-speed or standard systems – all variants offer many options of combinations to solve any printing challenge at top quality: fast, contactless and on absorbent and non-absorbent materials.
Select a control unit below for further information.
Thermal transfer printer for industrial solutions
Thermal transfer labellers provide solutions for many industrial printing requirements, packaging, logistics or healthcare, to mention just a few. Taking health-
© 2014 Messe Düsseldorf GmbH
81
Etiketten
© 2014 Messe Düsseldorf GmbH
82
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Kennzeichnung von Produkten mit Etiketten
customers to supply Aquafrost and barrier film lines in both Eastern Europe and
Asia.
Etiketten von Bluhm Systeme eignen sich für jede Applikation, jeden Untergrund und für alle Materialien und
Größen. So sind Etiketten von Bluhm Systeme auch für
Ihre Anwendung geeignet.
BE continually develops and refines it’s lines in order to minimise waste, improve
productivity and provide the best process control systems. Deciding factors in
the customer’s decision to buy from BE were the versatility and quality of the
SCD dies, plus the performance of the new FlexWIN series winders.
Verschiedene Arten von Etiketten
Eine enorme Anzahl an unterschiedlichsten EtikettenTypen sowie rund 2500 Werkzeuge für verschiedene
Etiketten-Formate sind sofort verfügbar. Hinzu kommt eine Vielzahl an Spezialetiketten: Wasser-, Öl- und fettresistente Etiketten, Sicherheitsetiketten, Duftetiketten, UV-Licht-, extrem widerstandsfähige Etiketten aus gegossener Acrylatfolie
oder RFID-Etiketten. Jedes Etikett wird individuell nach Ihren Anforderungen
produziert.
07/03/2013
Mike MacKendrick joins BE, as Sales Director North
America.
Mike MacKendrick has joined BE, as Sales Director North America.
Previously employed by packaging & performance film manufacturers Berry
Plastics and Atlantic Packaging, during his 25 year career in the packaging industry, Mike has developed an excellent knowledge of film structures and the
commercial issues facing producers of flexible packaging.
Supported by Doug Pope and Paul Carter, Mike is responsible for new business
and key customer account management across the USA and Canada.
Brampton Engineering
Address
Mike is based out of BE’s offices in Brampton, ON. Tel: (1) 905-793-3000 Fax:
(1) 905-793-1753 Cell: 647-272-0542
8031 Dixie Road
L6T 3V1 Brampton, Ontario
Canada
07/03/2013
Illies GmbH Representing BE in Asia
Illies GmbH, a Hamburg based sales & marketing company has been established in Asia for over a century,
supplying equipment to the plastics industry across the
region.
Phone
+1 905 793-3000
Fax
+1 905 793-1753
Internet address
www.be-ca.com
E-Mail
salesadmin@be-ca.com
Agreement was recently reached for Illies to represent BE in India, Indonesia,
Vietnam and Korea; these are important growth markets for barrier film, where
local knowledge, frequent customer contact and the ability to communicate in
the local language are essential in order to succeed.
Stand
Hall 17, A22 (Page 916)
Promoting BE products began in January 2013, early success includes the sale
of a 9 layer barrier film line to a new customer in South East Asia.
Company News
07/03/2013
Brampton Engineering
International Sales Success
BE has had a strong start to 2013, signing contracts with new and longstanding
© 2014 Messe Düsseldorf GmbH
83
© 2014 Messe Düsseldorf GmbH
84
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
Brampton Engineering
02.05.068
Technical films
03.01.001.01
Mixers, continuous type, for solids
03.01.001.03
Brandenburger Isoliertechnik GmbH & Co. KG
Address
Taubensuhlstr. 6
76829 Landau
Germany
Mixers, batch type, for solids
Phone
+49 6341 5104-0
03.02.001.01.01
Extruders, single screw type
Fax
+49 6341 5104-155
03.02.001.02.01
Extrusion lines for blown film
Internet address
www.brandenburger.de
03.03.005
Winding equipment
E-Mail
info@brandenburger.de
03.03.006
Slitter rewinders
Stand
Hall 08a, G51 (Page 894)
Product Details
02.05.068
Brampton Engineering
Technical films
Aquafrost Water Quenched Blown Film
BE’s AquaFrost technology is the solution for barrier
films with superior optical properties and thermoformability. AquaFrost lines use BE’s proven SCD (Streamlined Coextrusion Die) in 5, 6, 7, 8, 9, 10 or 11 layer configurations, to produce
barrier films with outstanding performance at a lower cost than comparable cast
barrier films.
Product Overview
Brandenburger Isoliertechnik GmbH & Co. KG
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.05.034
Bearing boxes, bushes and sections
02.05.057
Laminates, technical
02.05.069
Parts of industrial laminates
02.05.074
Composite boards
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.078
Heat insulation plates
Co-extrusion & Barrier Film Lines
Mono & 3 Layer Co-extrusion systems for superior films, for
industrial and retail markets.
Highest quality multi-layer barrier films, with minimal waste
and downtime.
© 2014 Messe Düsseldorf GmbH
85
© 2014 Messe Düsseldorf GmbH
86
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.069
Brandenburger Isoliertechnik GmbH & Co. KG
Parts of industrial laminates
02.05.065
High-class composite solutions
rubber and plastic processing industry tool and mouldmaking industry wood
working industry machine construction industry metal working industry
Slide bearing materials for the
machine construction industry pump industrytextile industry
Ablation Materials for the
aerospace industry defense industry
Phone
+49 9122 926-0
Fax
+49 9122 926-145
Internet address
www.bremawerk.de
E-Mail
info@bremawerk.de
Stand
Hall 12, B49 (Page 906)
Product Overview
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
Diese Produktgruppe ist ein Schwerpunkt unserer Fertigung. Über 60 Stanz-, Stanzbiegeautomaten, Exzenterpressen und Umformautomaten, sowie Spezialanlagen stehen dafür zur Verfügung. Dabei kommt u.a. die
neueste Maschinengeneration zum Einsatz, um komplexe Teilegeometrien
in höchster Präzision herstellen zu können.
Die erforderlichen Werkzeuge und Vorrichtungen werden in der eigenen Werkzeugkonstruktion und dem eigenen Werkzeugbau erstellt.Verarbeitung der unterschiedlichsten Materialien, je nach KundenwunschJahrzehntelange Erfahrung in schwierigen Biegeoperationen beim Gewinden, Magazinieren oder Zufügen in andere
BauteileNachbehandlungen, wie Härten / Vergüten (Bainit), Aushärten, Anlasen
und Glühen, Entfetten, Entgraten, Konservieren mit eigenen Anlagen, Oberflächenbehandlungen aller Art in enger Zusammenarbeit mit spezialisierten Firmen.
Brema-Werk GmbH & Co. KG
Walpersdorfer Str. 10
91126 Schwabach
Germany
Brema-Werk GmbH & Co. KG
Stanz- und Stanzbiegeteile
Customized Insulation Systems for the
Address
Product Details
Brema-Werk GmbH & Co. KG
Pressed parts in accordance with sample, drawing or
customer’s tools
© 2014 Messe Düsseldorf GmbH
87
© 2014 Messe Düsseldorf GmbH
88
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
adhesion and fabrication.
Brett Martin Ltd.
Address
24 Roughfort Road
BT36 4RB Mallusk
Great Britain / Northern Ireland
Phone
+44 28 90849999
Fax
+44 28 90836666
Internet address
www.brettmartin.com
E-Mail
mail@brettmartin.com
Stand
Hall 08a, C31 (Page 894)
Company News
08/14/2013
In addition, visitors will be able to view Foamalux White, which is available in
thicknesses of 1mm to 19mm. The bright white substrate’s optimal balance of
optical brighteners in its formulation, and minimal occurrence of UV yellowing
in digital print applications, combined with a consistently smooth flat even surface, has resulted in Foamalux White proving extremely popular with digital and
screen printers around Europe.
The company’s high gloss premium surface PVC offering, Foamalux Ultra, will
also be available on the stand. Available in white, red, yellow, green, blue, grey
and black, the 3mm or 5mm product offers enhanced UV protection and a high
quality gloss finish.
Digital and screen printers looking for a high quality environmentally friendly
option to print, adhere graphics, engrave or route should visit the stand to view
Brett Martin’s Foamalux Xtra. It comprises up to 80% recycled content in its
black core, which is sandwiched between one or two bright white PVC surfaces,
and provides the optimum surface for any sign and display application.
Brett Martin Ltd.
New products allows for more versatility and
workability for printers, sign makers and fabricators
Brett Martin today confirms the line-up of products that
will be showcased on its stand (8aC31) at K 2013. The
global manufacturer of plastic products for the construction, fabrication, print and display sectors, will offer visitors the opportunity to view its complete range
of semi-finished specialised plastic substrates for the
print and display sector. Visitors will also be able to test and view a number of
new products that will be launched at the show.
Foamalux range continues to grow Lightweight, versatile and durable, Foamalux
has earned a reputation for its quality performance and endless applications in
sign, display and print. Building on its flagship product, Brett Martin will extend
its Foamalux Colour range by launching Neon Pink, Neon Green, Raspberry
and Black Sparkle colours at K 2013. These additions set Foamalux even further apart from other brands, with 15 available shades in its Foamalux Colour
collection to make it the widest range of foam PVC available. Foamalux Colour,
which is available in thicknesses of 3mm and 5mm, offers depth and intensity of
colour to an endless variety of applications for digital or screen printing, graphics
© 2014 Messe Düsseldorf GmbH
89
“Brett Martin continually strives to grow its product range, and the four new
colours in Foamalux Colours is another testament to that,” comments Duncan
Smith, Sales Director – Europe, Brett Martin. “Foamalux gives printers the
widest variety of foam PVC to choose from, allowing them to design and deliver more innovative products than ever before. The new colours offer brightness and fun without compromising the established quality and performance of
Foamalux PVC sheets.”
Europe’s one stop shop for transparent flat sheets plastics expanded Brett Martin will showcase its wide array of transparent sheets, including its new PETg,
Marpet-g. Offering exceptional ease of workability in print and display applications, Marpet-g is a lightweight, durable, 100% recyclable clear substrate with
excellent optical clarity and light transmission properties. The sheet, currently
available in thicknesses of 2mm, 3mm, 4mm, 5mm and 6mm, is an ideal graphics adhesion solution suitable for digital and screen printing.
In addition, Marcryl Acrylic, a premium flat acrylic sheet with high gloss finish,
offers brilliant optical clarity with its glass-like properties and high scratch resistance. The sheet also offers excellent graphics adhesion, and the ability to
achieve a premium edge finish by flame polishing. It is available in clear, opal,
grey and silica green, which delivers a green edge to simulate tempered glass.
Finally, Marlon FS provides 200 times more impact resistance than glass, at only
half the weight. The fire resistant clear plastic, which is also available in bronze
and opal tints, is easy to handle and offers brilliant design flexibility. And, for
more challenging applications, specifiers have the option to add a hard coat for
additional abrasion resistance.
© 2014 Messe Düsseldorf GmbH
90
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
one of the most extensive ranges in the world.
Duncan Smith concludes, “Our wide range of transparent sheets offers the print
and display community everything they could need to fulfil the relevant job to a
high standard and create eye-catching graphics. We look forward to welcoming
visitors to our stand at K to view and test these products themselves.”
08/14/2013
Limited Edition colours make Foamalux the widest
range of coloured foam PVC available
Brett Martin, the global manufacturer of plastic products for the construction, fabrication, print and display
sectors, today announces the introduction of four new
limited edition coloured sheets to its market leading
Foamalux Colour PVC range; Neon Pink, Neon Green,
Raspberry and Black Sparkle. These new additions
set Foamalux Colours even further apart from its competitors, with 15 available
colours to make it the widest collection of foam PVC available. This allows more
creative possibilities for the sign and display market than ever before.
“Our industry leading Foamalux Colour foam PVC sheet range offers designers unlimited application possibilities in the creation of interiors, shop outfitting,
signage and fabrication,” comments Hayley Lowry, Marketing Manager, Brett
Martin. “After thorough market research amongst end-users and our distributors, it was clear that the Neon Pink, Neon Green, Raspberry and Black Sparkle
colours were the most popular out of all the samples we tested. The new colours
offer further brightness and fun without compromising the established quality and
performance of our Foamalux PVC sheets.”
Lightweight, versatile and durable, Foamalux has earned a global reputation for
its quality performance and endless applications in signage, display and print.
The strong, durable rigid sheet is renowned for its consistent smooth matt surface that allows for excellent end results with screen printing, direct to substrate
digital printing, and surface adhesion for vinyl and graphic applications.
At half the weight of a solid substrate, the Foamalux Colour foam PVC sheet
range is available in thicknesses of 3mm or 5mm, and comes in a range of
sheet sizes. The limited edition colours are available in 3mm. The whole range
is self-coloured throughout, which means that the coloured edge is maintained
after cutting, engraving or routing.
The 15 available colours include Strawberry Red, Red, Orange, Sunburst Yellow, Yellow, Ivory, Green, Blue, Light Blue, Grey, Black and the four new limited
edition colours Neon Pink, Neon Green, Raspberry and Black Sparkle.
• Foamalux White UV stable foam PVC sheets are available in a range of thicknesses 1-19mm with a bright white finish. • Foamalux Colour with a palette of
15 colours in a matt silky smooth finish, is the ultimate palette available for sign,
print and display. • Foamalux Ultra is durable and rigid in white plus six colours
in a high gloss finish, which provides high end appeal and improved UV protection. It is available in white plus six colours and a range of thicknesses and sheet
sizes. It may be suitable for outdoor use. • Foamalux Xtra is the ‘green’ choice.
It comprises a core of up to 80% recycled material in white, available in 3, 5, 10,
13 and 19mm thicknesses.
For more information on the new Foamalux Colours range visit bit.ly/NewColours or email mail@brettmartin.com.
Product Overview
Brett Martin Ltd.
02.01.002
Products made by extrusion
02.01.008
Parts made by rotation moulding
02.01.010
Parts made by injection moulding
02.03.003
Plastics products and parts for building applications
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.005
Plastics products and parts for household/consumer
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.08
Semi finished products of polystyrene (PS)
Brett Martin’s Foamalux foam PVC range is available throughout Europe and is
© 2014 Messe Düsseldorf GmbH
91
© 2014 Messe Düsseldorf GmbH
92
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
fit from component to component.
Full technical support and assistance is provided on site including product design, material selection and tooling design.
02.01.010
Product Details
Parts made by injection moulding
Brett Martin Ltd.
Parts made by injection moulding
02.01.002
Products made by extrusion
Specialising in the manufacture of Roofing & Drainage
products for the construction industry, Brett Martin’s Injection Moulding expertise spans 25 years. The company has the capability to injection mould products from
a range of materials including polyolefins, ABS and
both rigid and flexible PVC. Machinery on site includes
presses ranging from 85 tonne up to 1300 tonne, automatic assembly, counting and bagging equipment and a tool maintenance facility. The BS EN ISO 9001:2008 approved manufacturing facility has the capability
of manufacturing a range of product types from flexible PVC spacers to 450 mm
diameter PP chamber bases or 1m long PE ventilation combs.
Marlon, Marvec, Foamalux, Marpet, Marcryl
Based in the UK, Brett Martin is a world leading manufacturer of semi-finished extruded thermoplastic sheets
for export throughout the world.
Marlon polycarbonate in multiwall, corrugated, flat sheet
and click panel options with a choice of tints, colours,
coatings and finishes.
Marvec PVC is available in corrugated, flat sheet and
roll formats for use in roofing, glazing and hygienic cladding applications.
Foamalux is a lightweight, consistently smooth, durable foam PVC sheet available in matt, gloss and recycled sheet formats in a variety of colours for print
and display applications.
Marpet aPET and PETg sheet options for glazing, fabrication, print and display
applications.
Marcryl is a quality extruded acrylic with high gloss finish and exceptional optical
clarity for sign and display.
02.01.008
Parts made by rotation moulding
Parts made by rotational moulding
Brett Martin’s Rotational Moulding Facility specialises in
the manufacture of drainage parts and fittings for the construction sector. The company has the capability to rotationally mould virgin or reprocessed polyethylene materials with different density ranges. The BS EN ISO
9001:2008 approved facility has the capability of manufacturing products of up to 2.3m long and diameters down to
68mm. This process allows precision moulding and when
coupled with expert product finishing techniques ensures a machined water tight
© 2014 Messe Düsseldorf GmbH
93
Full technical support and assistance is provided on site including product design, material selection and tooling design.
02.03.003
Plastics products and parts for building applications
Marlon, Marvec
Brett Martin’s extensive Marlon polycarbonate and Marvec PVC product ranges have earned a reputation
for quality and performance in industrial, commercial,
agricultural, horticultural and DIY glazing, roofing and
cladding applications.
Marlon ST multiwall polycarbonate is a superior insulating glazing and roofing material in a range of structures
from 4-55mm.
Marlon CS corrugated polycarbonate is a high performance rooflight material
with exceptional physical properties.
Marlon FS a superior glazing solution particularly when safety or impact resistance are of importance
Marlon Clickfix is a complete architectural glazing system providing quality natural light, superior insulation and UV protection.
© 2014 Messe Düsseldorf GmbH
94
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Marvec CS with 3 performance grades is a durable roofing solution with excellent
UV, chemical and fire resistance.
Marvec CS agri is a chemically resistant and durable covering for the walls and
ceilings of agricultural buildings.
lation requirements. There are also options in clear, bronze and opal tints for
light diffusion and dual tints for solar control.
Marlon ST Blue multiwall sheets with IR Heat Block, provide cool naturally day lit
interiors without the heat build-up normally associated with large areas of glazing
in conservatories and sun rooms.
Marvec FS bio hygienic cladding is 99.9% effective in stopping bacterial growth
and killing bacteria.
Marlon CS corrugated polycarbonate with its broad working temperature range is
suitable for domestic roofing applications in hotter climates including swimming
pool covers, patio covers and pergolas.
02.03.004
Marvec CS corrugated PVC is a durable roofing solution with excellent UV,
chemical and fire resistance and is ideal for car ports, covered canopies and
lean too structures.
Plastics products and parts for office equipment/ promotion
Foamalux, Marlon FS, Mapet-g, Marcryl FS
02.04.001.04
Brett Martin offers an extensive range of extruded thermoplastic materials which are easily worked and capable of being printed, formed and fabricated, making
these products suitable for a wide array of sign and display applications.
Marlon Polycarbonate Sheet
Foamalux is a lightweight, consistently smooth, durable
foam PVC sheet available in matt, gloss and recycled
sheet formats in a variety of colours for print and display applications.
Marlon FS is a fire resistant clear extruded flat polycarbonate sheet that provides
200 times more impact resistance than glass, at only half the weight.
Marpet-g is a lightweight, durable, clear substrate with excellent optical clarity,
thermoformability and light transmission properties. It offers exceptional ease of
workability.
Marcryl FS is a premium flat extruded acrylic sheet with high gloss finish, offering
brilliant optical clarity with its glass-like properties and high scratch resistance.
02.03.005
Plastics products and parts for household/consumer
Marlon ST, Marlon ST Blue, Marlon CS, Marvec CS
Brett Martin manufactures extensive multiwall, corrugated and flat sheet options for use in roofing and glazing applications around the home and garden.
Combining lightweight with an impact resistance 200
times greater than glass, Marlon Longlife polycarbonate is a high performance plastic suitable for a wide
range of applications which require its strength, resilience, durability, and clarity. The Marlon polycarbonate range includes multiwall, corrugated and flat sheets
in a choice of tints, colours, coatings and finishes all
with co-extruded Longlife UV protection against the
long term effects of weathering.
02.04.001.05
95
Semi finished products of polyethylene (PE)
Marpet - PET Sheet
Brett Martins Marpet PET sheet range includes PETg flat sheet and aPET in
corrugated, flat and roll options. Both products combine high optical clarity with
excellent light transmission, strength and chemical resistance, Marpetg is ideal
for fabrication in particular vacuum and thermoforming. Marpet aPET and PETg
are becoming increasingly popular for use in a wide range of glazing, fabrication,
industrial, print and display applications. The Marpet range is 100% recyclable.
02.04.001.06
Marlon ST Longlife multiwall sheet is a lightweight insulating glazing which is perfect for conservatory glazing.
The Marlon ST range includes an extensive choice of
thicknesses and structures depending on thermal insu-
© 2014 Messe Düsseldorf GmbH
Semi finished products of polycarbonate (PC)
Semi finished products of polymethylmethacrylate
(PMMA)
© 2014 Messe Düsseldorf GmbH
96
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Marcryl - Acrylic Sheet
Trilite - GRP Rooflights
Brett Martin manufacture a range of very high quality
extruded acrylic sheet products suitable for a wide variety of applications from signs to point of purchase displays and light boxes. At half the weight and five times
the impact strength of glass, Marcryl acrylic offers the
optically clarity and aesthetics without the associated
risk of breakages. Ease of workability for fabricating
and thermoforming make acrylic a highly versatile material.
Brett Martin manufacture an extensive range of GRP
rooflights and sidelights in over 900 profiles, a wide
range of options and choice of product performance.
Quick and easy to install into the surrounding corrugated sheeting, all sheets achieve the highest levels of
profile accuracy and cover a range of safety levels, U
values and fire ratings. Single, double and triple skin
rooflights are available for a huge variety of applications
from canopies to warehouses, and factories to retail and leisure facilities. Our
entire range of GRP rooflights have BBA approval.
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
Foamalux - Foam PVC Sheet
Foamalux is one of the leading brands of foam PVC
sheet. Light in weight, versatile and durable Foamalux
has earned a reputation for quality performance and
endless applications in sign, display and print. The Foamalux range is one of the most extensive in the world:
Foamalux White a bright white signage and printing
substrate; Foamalux Colour in a vibrant palette of 15
colours; Foamalux Ultra providing a weatherable high
gloss finish in white and 6 dynamic colours; Foamalux Xtra with a black recycled core and co-extruded white surface.
Marvec - PVC Sheet
Marvec PVC is a weather resistant, durable roofing,
glazing and cladding material. Available in transparent
and opaque colours in a range of profiles, flat sheet options and on a roll, it is light in weight, easy to handle
and install in any application. A cost effective material,
Marvec PVC offers optional UV protection, chemical resistance and excellent fire performance.
02.04.001.13
Semi-finished parts/products
reinforced plastics
© 2014 Messe Düsseldorf GmbH
made
from
Bucher Hydraulics GmbH
Address
Industriestr. 1
79771 Klettgau
Germany
Phone
+49 7742 852-0
Fax
+49 7742 7116
Internet address
www.bucherhydraulics.com
E-Mail
info@bucherhydraulics.com
Stand
Hall 11, C49 (Page 902)
fibre-
97
© 2014 Messe Düsseldorf GmbH
98
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
10/01/2013
Bucher Hydraulics GmbH
Leak-free Proportional Throttle Cartridge, Size 5 / SAE
08
A ”baby brother” for the size 10 and 16 throttle cartridges that are already successfully established in
the market – ensuring high stability in oscillation-susceptible
systems.
07/10/2013
With this new leak-free size 5 / SAE 08 proportional
throttle cartridge, Bucher Hydraulics has extended the market range of the size
10 and 16 products, which are already in series production. The persuasive
features of this high-performance screw-in cartridge are its low pressure drop
at high flow rates, leak-freeness and high functional stability in systems that are
susceptible to oscillation. For controlled and responsive movements of large
loads, these are the decisive criteria today.
For more information, please visit our website
Link: http://www.bucherhydraulics.com/39864/Topline-navigation/NEWSletter/Leakproof-Prop-Throttle-Cartridges/index.aspx
07/10/2013
Altenerding systems are in construction machinery and cranes. With around
250 employees, the company generated sales of EUR 35 million in the financial
year ended 30 April 2012. The parties have agreed not to disclose the purchase
price. Completion of the deal requires the approval of the relevant competition
authorities.
Bucher Hydraulics acquires a production base in Brazil
- Bucher Hydraulics, a division of Bucher Industries,
is creating a new production and engineering base in
Brazil by acquiring Eco Sistemas near Porto Alegre. Eco Sistemas is the ideal
partner to establish the new hub of Bucher Hydraulics in South America.
Eco Sistemas Industrias de Màquinas Ltda. manufactures high quality hydraulic
power units for mobile and industrial applications and acts as a system integrator
of valves and other hydraulic products in the Brazilian market. The family-owned
enterprise was founded in 1996 and consists of three companies. It operates two
manufacturing sites located in Canoas near Porto Alegre (Rio Grande do Sul)
and in Pomerode (Santa Catarina) and runs sales offices in São Paulo and Rio
de Janeiro. Eco Sistemas generates sales of around CHF 10 million and has 60
employees.
Bucher Industries acquires Ölhydraulik Altenerding
- Bucher Industries is acquiring the medium-sized enterprise Ölhydraulik Altenerding in Erding, Germany,
for its Bucher Hydraulics division. The company specialises in advanced hydraulic cylinder technology for high-pressure applications, which complements Bucher Hydraulics’ portfolio of hydraulic solutions.
Changing demands on hydraulic systems worldwide reflect megatrends towards
greater energy and cost efficiency, enhanced functionality and environmental
compatibility. At the same time, there is a long-term trend towards hydraulic and
electrical drive systems. High-end cylinder technologies, combined with pumps
and valves in customized solutions, are in line with this trend.
The family-owned company of Ölhydraulik Altenerding Dechamps & Kretz
GmbH & Co. KG was founded in 1961. From its base in Erding, the company
develops, manufactures and assembles special systems based on advanced
hydraulic cylinder technology in the high-pressure range for a broad customer
base in Europe. The systems are used mainly in mobile hydraulics, but also in industrial and special-purpose hydraulics. The company has extensive application
know-how and is close to its customers thanks to a commitment to developing
customer-specific drive solutions. The main fields of application for Ölhydraulik
© 2014 Messe Düsseldorf GmbH
99
Product Overview
Bucher Hydraulics GmbH
02.05.050
Parts for pumps
02.05.073
Valves
03.07.001.01.02
Closed loop control equipment for pressure
03.07.001.01.05
Other control equipment
03.10.002
Barrels
© 2014 Messe Düsseldorf GmbH
100
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.050
Bucher Hydraulics GmbH
Parts for pumps
Bänninger Kunststoff-Produkte GmbH
Address
Bänningerstr. 1
35447 Reiskirchen
Germany
Phone
+49 6408 89-0
Fax
+49 6408 6756
Internet address
www.baenninger.de
E-Mail
info@baenninger.de
Stand
Hall 08b, C46 (Page 890)
Pumps
External Gear Pumps Internal Gear Pumps Internal
Gear Pumps (low viscosity) Metering Pumps Accessories
Advantages
Low operating costs Excellent efficiency Very low noise
level Can be used with flame-retardant liquids, fuel, biologically degradable and
low viscosity fluids Insusceptible to impurities in the hydraulic fluid
02.05.073
Valves
Valves
Pressure Valves Safety and Load Control Valves Check
Valves Flow-control Valves Directional Spool Valves Directional Seat Valves Accessories
Product Overview
Bänninger Kunststoff-Produkte GmbH
02.03.001
Plastics products and parts for plant building
02.03.003
Plastics products and parts for building applications
02.04.003.01
Parts from standard plastics
Advantages
Compact designs for simple installation High power
density with low pressure loss Activation types can be
combined at will High operating reliability and stability under load Great durability with maximum performance values Simple to integrate in systems / valve
manifolds
Product Details
02.03.001
Bänninger Kunststoff-Produkte GmbH
Plastics products and parts for plant building
PE
Raw Material:
PE 100 (polyethylene, classified according to the minimum required strength (MRS); color black. The material fulfills the requirements of EN 1555 for gas supply
as well as EN 12201 for drinking water supply. Baenninger PE 100 fittings are registered within DVGW, the
German Technical and Scientific Association for Gas
and Water for application in the areas of gas and water
© 2014 Messe Düsseldorf GmbH
101
© 2014 Messe Düsseldorf GmbH
102
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
supply.
of installation lines in the building services without any fear of some line damage. Polypropylene as material is therefore a good choice for the installation of
conduits for cold and warm water.
Working pressure:
PE 100 SDR 11 nominal pressure 16 bar
PE 100 SDR 17 nominal pressure 10 bar
02.04.003.01
For gas apply:
PVC-U
max. working pressure is not equal to nominal pressure (see DVGW guideline
VP 608 or regulations of respective countries).
Application examples: underground gas pipelines, pipelines for drinking water,
vacuum and waste-water disposal pipelines, apparatus and plant construction,
chemical industry, fish industry, irrigation systems, disposal technology, waste
water treatment plants, waste incineration systems, building of swimming pools
and many others.PE 100 fittings and pipes are largely spread within lay underground gas and water pipelines. Substantial advantages are small weight with
high flexibility and good chemical resistance.
02.03.003
Parts from standard plastics
Plastics products and parts for building applications
Raw Material:
PVC-U (PVC-hard) = polyvinyl chloride, color grey,
complies with the standard for pressure lines made
of PVC-hard. The material is in compliance with the
recommendations of KTW, the German Federal Public
Health Department (BGA). . Baenninger PVC-U fittings
are registered within DVGW, the German Technical and
Scientific Association for Gas and Water for application in the area of water supply.
Working pressure:
PP-R
Recommended value for solvent cement jointing and adaptor pipe fittings:
Raw Material:
PN 16 = 16 bar at 20° C (water)
RONFIT PP-R 80 (Polypropylene-Random-Copolymer)
with high molecular weight and highly heat stabilized;
Color: green. The material is in compliance with the
recommendations of KTW, the German Federal Public
Health Department (BGA). RONFIT plastic pipes and
fittings are registered within DVGW, the German Technical and Scientific Association for Gas and Water.
Recommended value for adaptor pipe and threaded fittings, unions:
PN 10 = 10 bar at 20° C (water)
Application examples: waste water neutralization, apparatus and plant construction, car wash systems, chemical industry, fish industry, photo and film industry,
galvanotechnics, greenhouses, building of swimming pools, waste water treatment plants, pharmaceutical industry, drinking water, water purification, shipbuilding and many others.Baenninger fittings made of PVC-U generally feature
all advantages which have proven value in all areas of industry and installation
engineering for decades. Particularly the excellent chemical resistance guarantees a long-lasting service life.
Working pressure:
For cold water at 20° C up to 20 bar
For warm water at 70° C up to 10 bar
For heating at 70° C up to 3 bar
Application examples: systems for sanitary installations , hot and cold water,
heating plants , systems for use of storm water, apparatus and plant construction, floor heating„ green houses, indoor swimming pools, shipbuilding, hot
springs, water treatment, compressed air lines and many other.Plastic pipes and
fittings made of PP-R 80 generally feature all advantages which have proven
value in all areas of industry and installation engineering for decades. Particularly the excellent corrosion resistance guarantees a long-lasting service life
© 2014 Messe Düsseldorf GmbH
103
© 2014 Messe Düsseldorf GmbH
104
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Bürkert GmbH & Co. KG Fluid Control Systems
02.05.073
Address
Christian-Bürkert-Str. 13-17
74653 Ingelfingen
Germany
Phone
+49 794010-0
Fax
+49 794010-91448
Internet address
www.burkert.com
E-Mail
info@burkert.com
Stand
Hall 11, A73 (Page 902)
Product Overview
Bürkert GmbH & Co. KG Fluid Control Systems
Valves
Typ 6240
C.E.B. Impianti SRL
Address
Via Stabilimento Figliodoni, 14
23891 Barzano / LC
Italy
Phone
+39 039 958482
Fax
+39 039 9217563
Internet address
www.cebimpianti.com
E-Mail
commerciale@cebimpianti.com
Stand
Hall 11, B19 (Page 902)
Bürkert GmbH & Co. KG Fluid Control Systems
02.05.073
Valves
03.07.001.01.02
Closed loop control equipment for pressure
03.07.001.01.03
Closed loop control equipment for temperature
03.07.001.01.05
Other control equipment
Product Overview
© 2014 Messe Düsseldorf GmbH
105
C.E.B. Impianti SRL
02.05.033
Storage and transport containers
02.05.067
Tanks
03.02.005.07
Spraying equipment
© 2014 Messe Düsseldorf GmbH
106
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
C.E.B. Impianti SRL
CN Mould & Plastic Limited
Address
CN Hi-Tech Industry Park, No. 227
518105 Shenzhen
China, People’s Republic of
Washing systems can be realized according to the customer need.
Phone
+86 755 86060383-828
The frame can be realized in painted steel or stainless
steel.
Fax
+86 755 86060393
An additional cabin can be used for the external washing in order to have a complete cleaning of the container.
Internet address
www.cnmouldplas.com
E-Mail
sales@cnmouldplas.com
Stand
Hall 08b, H25-3 (Page 890)
02.05.033
Storage and transport containers
EW100/AX
02.05.067
Tanks
EW100K
The washing cabin for powder bowls can be realized for the
washing with water or solvent.
Product Overview
the pumping group of the plant can be connect to a tailored
device used for the washing of the mixer.
02.01.010
Fix or movable systems are realized for the washing of the fix
storage tanks.
Product Details
02.01.010
CN Mould & Plastic Limited
Parts made by injection moulding
CN Mould & Plastic Limited
Parts made by injection moulding
Products & Services
CN Mould & Plastic Ltd specialize in helping companies
make concept into real plastic parts with rich experience
in :
A. -Insert Molding (metal sheet/screw or other plastic
insert molding);
B .-Over Molding (dual-shot or 3 materials molding).
C .-Elastomer Molding ( TPE , TPU & TPV etc. from GLS, SANTOPRENE,
TEKNOR APEX, KRAIBURG).
D. -Big Tool and Molding (Up to 10 ton tooling , max 5 kg part).
E. -Micro-Molding (0.1-0.5 gram/each part).
F. -Co-Design Project.
© 2014 Messe Düsseldorf GmbH
107
© 2014 Messe Düsseldorf GmbH
108
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
With self-develop High level special-automation for molding and assembly, our
production are more efficiently, more stably and cost is lower .
Under ISO9001:2008 & UL certification production environment, CN offers high
exact injection molds and plastic parts for Dell computer, HP, Apple, Aucom,
Pulse Electronics ,Cisco, Invensys , Galtronics , Federal Mogul ,Sanmina-SCI
,JSP and Curtis Industry etc.
Under ISO9001:2008 & UL certification production environment, CN offers high
exact injection molds and plastic parts for Dell computer, HP, Apple, Aucom,
Pulse Electronics ,Cisco, Invensys , Galtronics , Federal Mogul ,Sanmina-SCI
,JSP and Curtis Industry etc.
CN MAIN EQUIPMENT: .
-CNC Machine Center: AWEA VP2012 ( 2000*1200*760 , 3500kg) 1 unit, JOHN
FORD 1 unit ; KAFO High Speed 1 unit .FANUC High-Speed ROBODRILL 2 unit
(650*400,300kg), totally 5 units .
-EDM Machine: AGIE CHARMILLES, TOPEDM & Digi spark (Max Tank Size:
3000mm), totally 9 units .
Colloids Limited
Address
Kirkby Bank Road, Knowsley Industrial
L33 7SY Merseyside
Great Britain / Northern Ireland
Phone
+44 151 5469222
Fax
+44 151 5454742
Internet address
www.colloids.co.uk
E-Mail
sales@colloids.co.uk
Stand
Hall 08a, D01 (Page 894)
Company News
Colloids Limited
-Grinding Machine: SEEDTEC and PUFA, totally 7 units.·
-Milling Machine: PAOFONG and TAKAM, totally 8 units.·
10/08/2013
-Video Measuring Center: 3D Family Chi Tai VMC400ST 1 unit , VM250 1 unit ;
Colloids, the Makers of Masterbatch, at the K Show October 2013, Hall 8A
Stand D01
-Molding Machine: Krauss Maffei, Sumitomo, Toshiba , BORCHE , Nigata &
HAITIAN press sizes from 18ton(5.9gram/shot) to 1200 Ton(5kg/shot), totally
90 sets. ·
Press Release
Technical Breakthroughs, Capital Investment and Restructuring at Colloids –
Bringing Tangible Benefits to Customers
-Dual-shot & 3 shot molding machine : Press from 85Ton to 200Ton, vertical and
horizontal , totally 4 units.
Colloids have announced technical innovations in masterbatch and additives
covering;
Second Operations:·Pad-printing· Spray painting· Ultrasonic welding ·Part Assembly.
- the PACE® series including masterbatches based on solvent black (nigrosine)
and/or carbon black as well as formulations offering improvements in frictional
properties or heat stabilisation
If you would like to take advantage of the services that CN Mould & Plastic has
to offer , please feel free to contact us .
- the E-TEC® range of antistatic, dissipative and conductive compounds for applications where varying degrees of permanent electrical conductivity are required
- an enhanced range of special effects for film, to further augment the company’s
innovative seasonal colour palettes, ensuring customers’ products stand out
- lead-free film – with a doubling of the grades available - covering the extremes
of opacity and both light and colour fastness, all approved for EU food contact
applications
© 2014 Messe Düsseldorf GmbH
109
© 2014 Messe Düsseldorf GmbH
110
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- the all new SUSTAIN* line: bio-based for environmental sustainability (typically
corn starch or cane sugar) and available in either universal or polymer-specific
(polyamide, polyethylene and polyesters including PLA) masterbatches. The
Sustain range is fully recyclable and will not impact on the quality if mixed with
fossil derived polymers of the same type, unlike biodegradable polymers.
The company is accredited to the ISO 14001 Environmental Management System standard, and committed to continually developing novel technologies in
areas such as bioplastics, polymer recycling, energy recovery and responsible
disposal.
Technical and commercial staff from Colloids will be on hand at the K Trade Fair,
Hall 8A Stand D01, October 16 - 23 2013, in Düsseldorf Germany to discuss
these breakthroughs, as well as the benefits of:
Colloids Ltd
- significant recent investments in plant, including one million euro for a complete
new twin screw extrusion line featuring high torque and high volume extrusion,
with multiple loss-in weight feeders in addition to an underwater strand pelletizing
technology (particularly suited to high temperature crystalline polymers) for more
uniform geometry - providing greater stability in the customer’s process
Knowsley Industrial Park North
- major re-structuring that has seen both production facilities in the UK brought
together under the Colloids brand, as well as further strengthening in key company functions such as R&D, Quality, Black and Colour Development and Regulatory Affairs.
+44 (0) 151 546 9222
Russell Livesey, Managing Director of Colloids commented: “Every day Colloids
works hard making the most economically viable masterbatch – with all the right
attributes – readily available in the right quantities at the right place and time: as
I and our team look forward to explaining further at K in Düsseldorf.”
mark_wilden@colloids.co.uk
*Note: the new SUSTAIN bio based line is being launched alongside Colloids
existing D-K ® range of colour masterbatches for compostable applications
Contacts: www.colloids.co.uk
Kirkby Bank Road
Merseyside
L33 7SY
United Kingdom
Mark Wilden - European Business Development Manager
+44 (0) 7850 773 296
Bjorn Evans - Export Sales Manager
+44 (0) 7803 671 952
bjorn_evans@colloids.co.uk
Russell Livesey - Managing Director
+44 (0) 151 546 9222
Note for Editors
Headquartered in the United Kingdom, Colloids Ltd. has been producing high
quality masterbatches / concentrates for the thermoplastics industry since 1967.
The company offers custom designed solutions alongside a comprehensive
range of standard products.
Long known best for technical, speciality and functional black masterbatch, Colloids’ reputation has expanded in fields including colour masterbatch, pressure
pipe, artificial grass, bio-plastics and high dispersion film.
liz_whittingham@colloids.co.uk
Josephine Bagnall - Sales & Marketing Director
+44 (0) 7867 907 514
josephine_bagnall@colloids.co.uk
As part of the international Tosaf Group, Colloids exports over 75% of sales
worldwide into sectors including packaging, automotive, construction, agriculture, cosmetics, pharmaceuticals, appliances, household, and electrical / electronic.
Backed by ISO/TS 16949:2009 accreditation, Colloids continually strives to improve performance in both service and products - supported by the highly skilled
R&D team and extensively equipped laboratory facilities.
© 2014 Messe Düsseldorf GmbH
111
© 2014 Messe Düsseldorf GmbH
112
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
Colloids Limited
Product Overview
Corvaglia Group
01.01.037
Masterbatches
02.01.010
Parts made by injection moulding
01.10.047
Masterbatches
02.03.014
Plastics products and parts for food processing
industry
01.10.048
Colourants
03.06.001
Injection and compression moulds
01.10.049
Color Blacks (s. 1.10.99 Carbon black)
02.03.002
Plastics products and parts for automotive
02.03.007
Plastics products and parts for electrical engineering
Product development
02.03.015
Plastics products and parts for transport/packaging
As our customer, you reap the benefits of our vertical
integration. We are your competent partner for the production of injection moulds and closures. We are perfectly familiar with the needs of both bottlers and consumers. Through appropriate quality control testing in our in-house laboratories, we ensure that our
closures comply with applicable safety and environmental regulations. In addition, we can help you implement your own quality assurance system at your
production site.
Product Details
02.01.010
Corvaglia Group
Address
Phone
Hörnlistr. 14
8360 Eschlikon
Switzerland
Corvaglia Group
Parts made by injection moulding
Patented Corvaglia closures are the economical solution for practically all bottled
beverages. No matter whether it involves a conventional bottleneck, a widemouth closure, a lightweight beverage container closure or a special application,
our range of caps is sure to offer one which also suits your requirements.
+41 71 9737777
Fax
02.03.014
Internet address
www.corvaglia.ch
E-Mail
info@corvaglia.ch
Stand
Hall 12, A51-2 (Page 906)
© 2014 Messe Düsseldorf GmbH
Plastics products and parts for food processing industry
Capping supervision
Maximum output ranges of 72’000 bottles per hour set
very high requirements to the capping process. We utilize high-speed cameras to provide the necessary information for a trouble-free capping process. And if you are using cappers that do
not fit to our closures, we can manufacture chucks for you. Our technicians will
ensure that the closures build a consistent unit with the neck-finish of the bottle
and the cappers of the filling line.
113
© 2014 Messe Düsseldorf GmbH
114
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
sories and inserts can be added on the rotomolded piece. Each piece is subject to an appropriate control procedure, with the development of specific test
benches if requested.
Cytec
02.01.011
Address
Avenue de Lorraine
57380 Faulquemont
France
Phone
+33 3 8700304-0
Fax
+33 3 8700304-1
THERMOFORMING
Cytec has acquired over the years a leading-edge production tool, considering both the concepts of quality
and economy. Able to industrialize parts up to dimensions of 1500 x 2500 mm, for thicknesses from 0.5 to 10
mm, Cytec masters most thermoplastics such as ABS,
PS, HDPE, PP, PET, PC, PMMA, PS / PE ...
Internet address
E-Mail
jean.michel.provot@cytec.fr
Stand
Hall 08a, F12-3 (Page 894)
Product Overview
Parts made by rotation moulding
02.01.011
Parts made by termoforming
Product Details
02.01.008
The workshop has a fleet of manual and automatic thermoforming machines,
5-axis machining centres, US or wire welding equipment. Cytec’s industrial tool
is sized for both small and large series. Our thermoformed products can include
many operations such as gluing, riveting, painting, mounting of accessories,
marking.
Cytec
02.01.008
Parts made by termoforming
The extrusion of plates is carried out internally by a complete line with a capacity
of 2000 tons per year, and whose characteristics are perfectly optimized for our
products. Thus you will benefit from an exemplary reactivity and competitiveness.
Mastering the right quality is the guarantor of our competitiveness.
Cytec
Parts made by rotation moulding
ROTOMOLDING
Technique designed for the manufacturing of hollow
parts, by the implementation of plastic powders, the rotomolding has quickly established itself at Cytec.
The largest rotomolding machine has a spherical diameter of 3.5 meters, which positions Cytec in various markets such as tanks, containers, pallets, crankcases, technical parts or decorative elements...
PE and PP are the materials commonly transformed by Cytec. Many acces-
© 2014 Messe Düsseldorf GmbH
115
© 2014 Messe Düsseldorf GmbH
116
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.10.099
Carbon black
01.10.102
Impact modifiers
02.03.002
Plastics products and parts for automotive
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
Denki Kagaku Kogyo Kabushiki Kaisha
Address
Nihonbashi-muromachi 2-1-1, Chuo-ku
103-8338 Tokyo
Japan
Phone
+81 3 52905550
Fax
+81 3 52905113
Internet address
www.denka.co.jp
Product Details
E-Mail
info@denkagermany.de
Stand
Hall 07a, D26 (Page 880)
02.03.002
Denki Kagaku Kogyo Kabushiki Kaisha
Plastics products and parts for automotive
DENKA ABS
Outline
Product Overview
Denki Kagaku Kogyo Kabushiki Kaisha
A versatile ABS (acrylonitrile butadien styrene) resin.
01.01.005
Acrylonitrile/butadiene/styrene copolymers
Characteristics
01.01.119
Styrene/Ë-methylstyrene copolymers (S/ËMS)
Various grades are available, such as standard, highly
fluid, highly shock resistant, matt, plating, extrusion grades, etc.
01.01.120
Styrene/Butadiene-Blockcopolymer
01.03.021
Maleic resins
It is extensively used in a wide range of applications, including toys, home articles, home electric appliances, OA equipment, exterior and interior automotive
parts, etc.
01.05.001
Acrylic rubber (ACM)
DENKA MALECCA
01.05.008
Chloroprene rubber (CR)
Outline
01.10.002
Additives, other
Uses
A heat-resistant ABS resin based on ”DENKA IP” - a
Styrene-N-Phenylmaleimide copolymer. It has been
designed as an easy-to-use resin by improving conventional heat-resistant ABS resins which had defects in
terms of moldability, thermal stability, and impact resistance.
Characteristics
It has an excellent balance of physical properties, including heat and impact re-
© 2014 Messe Düsseldorf GmbH
117
© 2014 Messe Düsseldorf GmbH
118
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
sistance, as well as fluidity (moldability).It has excellent thermal stability at the
time of molding, with little or no silvering or burning occurring, thus making it possible to select a wide spectrum of molding parameters.A wide range of grades
is available from partially to ultra thermally resistant at nominal temperatures
around 150 degrees.Our proprietary compound manufacturing technique has
enabled us to realize excellent cost performance.
DESMA TEC
Address
Desmastr. 3-5
28832 Achim
Germany
Uses
Phone
+49 4202 990-0
Mobile phones, vehicle-mounted audio equipment, automotive interior components, home electric appliances, OA equipment, etc.
Fax
+49 4202 990-210
02.03.014
Internet address
http://www.desma-tec.de
E-Mail
info@desma-tec.de
Stand
Hall 13, D75 (Page 908)
Plastics products and parts for food processing industry
CLEAREN
Outline
Since SBC resin ”CLEAREN” (styrene-butadiene block
copolymer) has excellent transparency, impact resistance, and hinge performance, and can also be compounded with GPPS without impairing transparency, it
is widely used as a reinforcing agent as well.
Product Overview
Characteristics
Its peculiar molecular structure affords superb transparency, hinge performance,
and texture, as well as excellent thermal stability enabling reduced blistering.It
also has excellent moldability, and is a high performance transparent resin that is
well-suited to various molding methods including injection and extrusion molding
(for forming films and sheets), blow molding, inflation molding, profile extrusion,
etc.
Uses
DESMA TEC
02.05.045
Micro parts
03.02.002.02
Injection moulding machines, multi-component
03.02.002.03
Injection moulding machines, multi-station
03.02.005.02
Reaction moulding machinery and plant
03.02.005.03
Other machinery for foam
Its wide variety of uses include: shrink films, food packaging material sheets,
electronic component packaging materials, packaging material sheets for manufacturing, blister packs, ampoules, cosmetic caps, toys, miscellaneous articles,
etc.
© 2014 Messe Düsseldorf GmbH
119
© 2014 Messe Düsseldorf GmbH
120
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.045
DESMA TEC
Micro parts
Company News
15.10.2013
Deutsche Gesellschaft für Kreislaufwirtschaft und...
SYSTALEN – neuer Name für Qualität
Micro injection moulding machine for smallest shot
weights
DSD-Gruppe: Hochwertige Kunststoffrezyklate für den
industriellen Einsatz
High precision for smallest shot weights due to:
DSD-Standorte in Hörstel, Eisfeld und Genthin jetzt
nach EUCert zertifiziert
two-step plunger injection unit
Umfirmierung: Systec Plastics Eisfeld auf dem Weg zu einem der führenden
Hersteller für Kunststoffrezyklate aus Post-Consumer-Kunststoffabfällen
comfortable visualization
Köln, 15. Oktober 2013. Neuer Name – neues Programm: Unter dem Markennamen SYSTALEN wird die Grüner-Punkt-Gruppe künftig ihre hochwertigen
Granulate aus Post-Consumer-Kunststoffabfällen vermarkten. „SYSTALEN
steht für hochwertige Rohstoffe für Spritzguss und Extrusion“, betont Michael
Wiener, Geschäftsführender Gesellschafter und Geschäftsführer der Duales
System Holding und CEO der Deutschen Gesellschaft für Kreislaufwirtschaft
und Rohstoffe mbH (DKR). „Wir bieten verlässliche Produkte bester Qualität,
nach Kundenwunsch eingestellt und mit interessanten Preisvorteilen gegenüber
Primärware. Kunststoffprodukte aus SYSTALEN können außerdem den Blauen
Engel beantragen.“
precise control
toggle clamp system
standardized mould changing
high dynamic servo-electric injection unit
Deutsche Gesellschaft für Kreislaufwirtschaft und Rohstoffe
mbH (DKR)
Address
Frankfurter Str. 720-726
51145 Köln
Germany
Phone
+49 2203 9317-0
Fax
+49 2203 9317-690
Internet address
www.dkr.de
E-Mail
info@dkr.de
Stand
Hall EN, 01A (Page 862)
Damit ein Kunststoffartikel den Blauen Engel tragen darf, muss der Hersteller
unter anderem nachweisen, dass die Produkte ressourcenschonend zu mindestens 80 Prozent aus sogenannten Post-Consumer-Rezyklaten hergestellt
sind, also weitgehend aus Recyclingware. SYSTALEN gewährleistet das und
bietet darüber hinaus erstklassige Kunststoffqualität.
Eine Voraussetzung dafür haben die produzierenden Unternehmen der Duales
System Holding, die Systec Plastics in Hörstel und Eisfeld sowie die Systec
Mixed Plastics GmbH in Genthin, mit der Zertifizierung nach EUCert geschaffen. Das Zertifikat über die Herkunft und Zusammensetzung der Granulate,
Mahlgüter und Agglomerate macht die gesamte Lieferkette für die Herstellung von Fertigprodukten aus Recyclingkunststoffen transparent und nachvollziehbar. Das ist eine Voraussetzung dafür, dass der Hersteller der Endprodukte
den Blauen Engel für diese Produkte beantragen kann.
„Modernster und effizientester Hersteller Europas“
© 2014 Messe Düsseldorf GmbH
Die bisherige SR Schwarzataler Compounding GmbH firmiert ab sofort unter
dem Namen Systec Plastics Eisfeld GmbH. „Die Systec Plastics und speziell das
Werk in Eisfeld werden wir innerhalb der nächsten Jahre zum modernsten und
effizientesten Hersteller von Granulaten und Compounds aus Post-ConsumerKunststoffabfällen in Europa ausbauen“, kündigt Frank Böttcher, Geschäfts-
121
© 2014 Messe Düsseldorf GmbH
122
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
führer der DKR und der Systec Plastics Eisfeld, an. „In Eisfeld entsteht die
Zukunft.“
Das Produkt SYSTALEN ist ein Musterbeispiel für die Zusammenarbeit innerhalb der DSD-Gruppe: Forschung und Entwicklung der Produkte erfolgt durch
die Der Grüne Punkt – Duales System Deutschland GmbH, die Herstellung an
den Standorten Eisfeld, Genthin und Hörstel, Vertrieb und Logistik über die DKR
– bis hin zur bedarfsgerechten Lieferung per Silofahrzeug.
Mehr Infos unter www.systec-plastics.de
Product Overview
Deutsche Gesellschaft für Kreislaufwirtschaft und...
01.01.010.11
Compounds
01.01.032
Granulates
01.01.077
Polyethylene PE-HD
01.01.078
Polyethylene PE-LD
01.01.085
Polyethylene terephthalate (PET)
01.01.093
Polypropylene
01.01.095
Polystyrene expandable (EPS)
01.01.116
Reclaimed material
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.005
Plastics products and parts for household/consumer
02.03.015
Plastics products and parts for transport/packaging
Ansprechpartner:
Klaus Hillebrand, Tel.: 0 22 03 / 937-257
Über die Duales System Holding:
Die DSD – Duales System Holding GmbH & Co. KG bündelt die unternehmerischen
Aktivitäten des Grünen Punkts für eine nachhaltige Wirtschaftsweise, die Wertstoffe in geschlossenen Kreisläufen hält. Rohstoffe sollen nicht verschwendet,
Klima und Umwelt so wenig wie möglich belastet werden. Diesem Ziel untergeordnet ergänzen sich die zur Holding gehörenden Unternehmen mit ihren jeweiligen Geschäftsfeldern sinnvoll:
Die Der Grüne Punkt – Duales System Deutschland GmbH ist seit 1990 für die
Umwelt aktiv und steht für ein nachweislich ökoeffizientes Verpackungsrecycling und weitere Rücknahmelösungen. Die Deutsche Gesellschaft für Kreislaufwirtschaft und Rohstoffe mbH (DKR) beliefert die internationale Wirtschaft
mit hochwertigen Sekundärrohstoffen. Als Stoffstrom-Manager übernimmt sie
zudem alle logistischen Aufgaben und Prozesse. Die Unternehmen Systec Plastics GmbH, Systec Plastics Eisfeld GmbH, Systec Mixed Plastics GmbH und
DKRaastoffer A/S produzieren Rezyklate von hoher Qualität als kostengünstige
Alternative zur Neuware und investieren dazu in Forschung und Entwicklung
von Recyclingtechnologien. Die HPI Resource GmbH berät in allen Fragen des
betrieblichen Entsorgungsmanagements. Sie entwickelt kundenindividuelle und
wirtschaftlich attraktive Abfallkonzepte, die sich an der optimalen Stoffausbeute
orientieren.
Weitere Informationen im Internet unter www.dsd-holding.de
DSD – Duales System Holding GmbH & Co. KG • Frankfurter Straße 720-726 •
51145 Köln (Porz-Eil)
V.i.S.d.P.: Klaus Hillebrand • pressestelle@dsd-holding.de • www.dsd-holding.de
• Tel.: 02203 937-257 • Fax: 02203 937�195
© 2014 Messe Düsseldorf GmbH
123
© 2014 Messe Düsseldorf GmbH
124
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
food packaging, utilities, healthcare and medical, and more.
Dow Europe GmbH
Address
Bachtobelstr. 3
8810 Horgen
Switzerland
Phone
+41 44 7282111
Fax
+41 44 7282935
Internet address
www.dow.com
E-Mail
info@dow.com
Stand
Hall 08a, K48 (Page 894)
Company News
09/05/2013
“The K Show continues to be the premier global event for us to highlight how
we are the preferred innovation partner for our direct customers and the broader
value chain worldwide, “said Diego Donoso, Business President, Dow Packaging and Specialty Plastics. “Plastics markets continue to be on a growth trajectory, and projects like Sadara and our investments in the U.S. Gulf Coast will
serve to meet robust demand well into the future.”
Dow will provide a world class experience for customers at K 2013 with access to
the Company’s exclusive Business Center, where, among other activities, they
can attend a variety of special keynote addresses featuring thought leaders,
visionaries and industry experts speaking on topics including energy, sustainability and the new paradigm of global economic recovery.
Dow Europe GmbH
DOW PERFORMANCE PLASTICS TO SHOWCASE
INNOVATION, VALUE CHAIN COLLABORATION AT K
2013
“Our participation at K continues to underscore Dow’s commitment to greater
value chain intimacy and collaboration across the plastics industry,” said Kim
Ann Mink, Business President, Dow Elastomers, Electrical and Telecommunications, “It is a tremendous opportunity for our customers and other key partners
to engage directly with our marketing and technology experts from around the
world, and to see first-hand the latest market-driven advances in product innovation and application development capabilities, and how these technologies are
changing the landscape of the industry.”
Dow Performance Plastics comprises the world’s largest and most differentiated
plastics franchise and is strategically aligned with fast growing specialty markets.
In 2012, Dow’s plastics franchise had revenues of $14.5 billion. The businesses
representing Dow at K include the following:
World-class technology, leading brands, rich innovation pipeline and market
focus deliver competitive advantage for customers and value chain partners
around the world.
Dow Performance Packaging is one of the world’s largest flexible and rigid plastic
packaging franchises for the food and beverage market, as well as industrial and
consumer packaging sectors.
MIDLAND, Mich. – AUGUST 29, 2013 – The Dow Chemical Company (NYSE:
Dow) will showcase its world class brands, technologies and new innovations
from its Performance Plastics franchise at K 2013, the largest global gathering
of the plastics and rubber industry taking place in Dusseldorf, Germany, October
16-23.
Dow Elastomers is the largest global producer of polyolefin elastomers, offering
the broadest product portfolio, and the largest metallocene ethylene propylene
diene terpolymer (EPDM) producer – serving transportation, infrastructure, consumer durables and adhesives industries
Using the theme “Solutionism at K”, Dow plans to highlight how new levels of
innovation and collaboration in key markets and value chains are enabling breakthrough solutions across the plastics industry.
Dow will also showcase its many global growth projects – namely the Company’s
joint venture project in Saudi Arabia (Sadara Chemical Company) as well as
Dow’s investments on the U.S. Gulf Coast. These investments illustrate Dow’s
commitment to helping customers win in many high technology, high growth
markets such as transportation, infrastructure, appliances, consumer durables,
© 2014 Messe Düsseldorf GmbH
125
Dow Hygiene and Medical delivers higher performing materials for the personal
hygiene, infant and adult diaper and medical packaging markets
Dow Adhesives and Functional Materials provide the label, food packaging
and medical packaging markets with adhesive products that enhance bonding
strength with improved aesthetics
Dow Electrical & Telecommunications is a leading global provider of technologydriven solutions for the electrical and telecommunications industries
Dow Polymers for Pipe services water and natural gas distribution systems with
© 2014 Messe Düsseldorf GmbH
126
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
pipe materials that are stronger, easier to install, and meet regulatory standards
Other planned promotions include demonstrations on leading machine manufacturers’ lines throughout the show, allowing customers to see the latest processing and performance advantages of Dow’s next generation products first-hand
and up close.
Dow will also host a series of technical presentations at its exhibit on the show
floor, with technical and marketing experts speaking on topics including: sustainability, product application performance, market trends, and packaging design,
among others.
Dow will participate at K 2013 at stand K48 in Hall 8a, near the north entrance
of the Messe Dusseldorf trade fair site.
To enhance the K 2013 experience for customer and value chain partners worldwide, Dow has launched a special customer registration and information portal
www.dow-k2013.com. Regular updates on Dow’s plans for K 2013 can also be
obtained by following #dowatk2013 on Twitter. For more general information
about K 2013, please visit www.k-online.de.
About Dow
Dow (NYSE: DOW) combines the power of science and technology to passionately innovate what is essential to human progress. The Company connects
chemistry and innovation with the principles of sustainability to help address
many of the world’s most challenging problems such as the need for clean water,
renewable energy generation and conservation, and increasing agricultural productivity. Dow’s diversified industry-leading portfolio of specialty chemical, advanced materials, agrosciences and plastics businesses delivers a broad range
of technology-based products and solutions to customers in approximately 160
countries and in high growth sectors such as electronics, water, energy, coatings and agriculture. In 2012, Dow had annual sales of approximately $57 billion
and employed approximately 54,000 people worldwide. The Company’s more
than 5,000 products are manufactured at 188 sites in 36 countries across the
globe. References to ”Dow” or the ”Company” mean The Dow Chemical Company and its consolidated subsidiaries unless otherwise expressly noted. More
information about Dow can be found at www.dow.com.
05/03/2013
Dow Named for 13th Time to Dow Jones Sustainability
World Index
Midland, Mich. - September 12, 2013
global chemical industry – marking the 13th time Dow has received this recognition since the launch of the index.
Dow was one of only nine chemical companies to be recognized in the World
Index in 2013, representing sustainability performance in the top 10% of the
industry. Additionally, Dow achieved a perfect 100% score in the Environmental
Policy Management System category, leading the Materials Industry Group for
the second year in a row.
”At Dow, our mission is to passionately innovate sustainable solutions for our
customers,” said Neil Hawkins, Dow vice president of global EH&S and Sustainability. ”The Dow Jones Sustainability World Index is one of the most highly
regarded sustainable business benchmarks, and we are proud to be recognized
amongst a select few who remain steadfastly committed to both sustainability
performance and business results.”
”Membership in this index is a solid proof point of Dow’s commitment to use
science and technology to address timely social and environmental challenges
as we continue driving profitable growth for our Company,” said Doug May, vice
president of Investor Relations.
Dow seeks to set the standard for sustainability, setting aggressive 2015 Goals
and taking pride in accountability and transparency throughout the process.
Centered around using sustainable chemistry to help solve world challenges,
these goals include six strategic themes: Addressing climate change; energy
efficiency and conservation; product safety leadership; contributing to community success; local protection of human health and the environment; and breakthroughs to world challenges. More complete information about Dow’s Goals
and its most recent public reporting can be found at www.dow.com/sustainability.
Product Overview
Dow Europe GmbH
01.01.010.09
Cellulose
01.01.016
Chlorinated polyethylene (CPE)
01.01.017
Compounds (Polymer blends)
01.01.021
Dry blend
Today, the Dow Jones Sustainability World Index announced its rating of The
Dow Chemical Company (NYSE: DOW) as one of the top performers in the
© 2014 Messe Düsseldorf GmbH
127
© 2014 Messe Düsseldorf GmbH
128
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.01.026
Ethylene/ethylene acrylate copolymers (E/EA)
01.03.007
Epoxy resins (EP)
01.01.029
Ethylene/VAC-copolymers (E/VA)
01.03.008
Epoxy resins moulding compounds (EP)
01.01.032
Granulates
01.03.009
EP-Prepregs
01.01.034
Ionomers
01.04.003
Basic products PU
01.01.074
Polyethylene expandable
01.04.009
Polyesterpolyols
01.01.075
Polyethylene crosslinkable
01.04.010
Polyetherpolyols
01.01.076
Polyethylene blends
01.04.021
Polyurethane casting resins rigid foams-systems
01.01.077
Polyethylene PE-HD
01.04.022
Polyurethane casting resins semi-rigid foams-systems
01.01.078
Polyethylene PE-LD
01.04.023
Polyurethane casting resins flexible foams-systems
01.01.079
Polyethylene PE-LLD
01.04.024
Polyurethane casting prepolymer binder resins
01.01.080
Polyethylene PE-MD
01.05.007
Chlorinated polyethylene (CM)
01.01.083
Polyethylene PE-ULD
01.05.013
Ethylene/propylene terpolymers (EPDM)
01.01.084
Polyethylene PE-VLD
01.05.014
Ethylene/VAC-copolymers (E/VA)
01.01.095
Polystyrene expandable (EPS)
01.07.003
Epoxy resins (EP)
01.02.002
Olefin copolymers (EP(D)M)
01.07.005
Ethylene/acrylic acid copolymers (EAA)
01.02.010
Olefin based thermoplastic elastomer, TPO
01.07.006
Ethylene/VAC-copolymers (E/VA)
01.02.013
TPV-thermoplastic vulcanised material
01.08.002
Binders
01.02.014
Other thermoplastic elastomers
01.08.006
Dispersion adhesives
© 2014 Messe Düsseldorf GmbH
129
© 2014 Messe Düsseldorf GmbH
130
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.08.007
Rubber to Metal Bonding Agents or Primers and
Bonding Agents for Rubber to Metal (bonding agent or
adhesive systems)
01.08.011
Contact adhesives
01.08.017
Hot melt adhesives
01.08.018
Textil finishes
01.10.002
Additives, other
01.10.024
Binders
01.10.027
Agents biozides
01.10.127
White pigments
01.13.009
Bisphenol A
01.13.016
Diamine
01.13.021
Epichlorohydrin
01.13.022
Ethyl benzene
01.13.023
Ethylene glycol
01.13.028
Isocyanates
01.13.038
Polyols
01.13.039
Polyurethane systems PU
01.13.040
Raw materials
02.04.002
Films
DS SMITH PLASTICS
Address
B.P. 27, 77 route de Lapoutroie
68240 Kaysersberg
France
Phone
+33 3 89783230
Fax
+33 3 89471856
Internet address
www.kaysersberg-plastics.com
E-Mail
Stand
Hall 08b, C35 (Page 890)
Company News
04/24/2013
© 2014 Messe Düsseldorf GmbH
DS SMITH PLASTICS
New AKYVER Panel Silence
AKYVER® Silence is our last innovation for the buildings in particularly noisy environments (sport halls, schools, airports, building along the highway …), showing a record acoustic insulation, going till 30 dB for the surrounding noises and reducing the
impact of rain noise of 8 dB. In summary, an efficient compromise energy performance / sound insulation. Moreover, thanks
to its particular aesthetics, this product also appeals to designers who wish to create buildings with high architectural value.
Advantages : - 2 x less of noise (till 10 dB improvement comparing to standard SPC) - Reduction of greenhouse effect, improvement of solar factor ~20%
- Light’s natural diffusion - Possible on all AKYVER sheets structures and systems - Weight gain comparing to double glazing - Unique aesthetics, possible to
play with colours by back lighting
131
© 2014 Messe Düsseldorf GmbH
132
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.04
Product Overview
Semi finished products of polycarbonate (PC)
DS SMITH PLASTICS
Polycarbonate twinwall sheets
02.03.015
Plastics products and parts for transport/packaging
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.07
Semi finished products of polypropylene (PP)
Product Details
02.03.015
Our range of polycarbonate multiwall sheets are designed for various roofing, glazing, cladding, panel, skylight and skydome erection applications. These sheets
are cost-effective, high-performance (in terms of thermal insulation), light, and highly impact-resistant. Further, they allow cold bending.
DS SMITH PLASTICS
Plastics products and parts for transport/packaging
Multi Way Transit Packaging
Multi way transit packaging provides considerable gains
in profitability of logistical flows. Our design offices allow us to offer custom solutions adapted to your requirements, while ensuring optimal protection for your parts.
Our offerings range from small to large containers to
fixed or flexible PP fittings, to mainly secondary or tertiary packaging solutions.
Akyver® multiwall sheets are specially designed for outdoor cladding and roofing
applications for industrial, sports and agricultural buildings, skylights, domes and
glazed roof constructions …. Recent innovations allow us to offer an excellent
thermal insulation coefficient while keeping the product light and durable. The
sheets are available in 2-, 4-, 7- and 8-wall formats, and with thicknesses ranging
from 4 to 32mm.
Akyver Connect® 16 and Akyver Panel® 40 and 50 systems are clipable /
nestable. They come with a complete range of accessories and aluminium or
polycarbonate profiles. These modular connectable systems are ideal for new
cladding or for renovating industrial and storage buildings.
This solution is particularly environmentally and cost effective once a logistical
loop is identified between a supply location and a delivery location.
Our polycarbonate Akyver® Confort Plus receive anti-UV protection and surface
treatment which limit solar gain, through a coating incorporated into the sheet
manufacturing process, with reflective metal particles
The AKYBOX tray is the best Akylux® or Akyboard® tray solution provided in
custom sizes for loads of up to 15 kg.
02.04.001.07
Rigid polypropylene dividers can complement the overall solution, ensuring optimal part location.
Polypropylene sheets
Textile flexible fittings provide effective and lasting protection for fragile parts,
painted parts, and parts that are susceptible to scratching during transport. The
flexibility of the fittings allows a safe insertion of parts as well as quantity optimization for any given volume and cost effective once a logistical loop is identified between a supply location and a delivery location.
We have a wide range of polypropylene sheets suited to
various applications and markets. The sheets are used
both in the graphic arts and industrial sectors. They are
characterised mainly by their rigidity, lightweight and
their durability.
Semi finished products of polypropylene (PP)
We extrude our Akyplen® 0.25 to 2mm thick polypropylene sheets mainly for
printing applications, particularly offset applications.
Available in sand, satin or gloss texture (Litestop or Soft Touch versions), they
are perfectly suited to meet graphics, boxing or POP medium requirements.
L’Akylux® / Correx® is a polypropylene twinwall sheet used for multiple applications: layer pads, packaging, print medium, signs. Our sheets are lightweight,
rust-proof, durable and 100% recyclable.
© 2014 Messe Düsseldorf GmbH
133
© 2014 Messe Düsseldorf GmbH
134
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
L’Akyplac® has a white and opaque exterior surface, allowing two-sided printing.
Product Overview
Akyboard®, intended for customised packaging or design of parts, is a bubblestructure, three-layer sheet allowing greater rigidity, offering the possibility of
in-line lamination of PP films or non-woven PP.
01.04.026
Closed cell foam rubber
02.01.007
Parts made by compression moulding
02.04.001.12
Semi finished products of rubber
02.05.056
Foam products
Akyprint® provides an excellent medium for two-sided digital printing, and thanks
to its rigidity, has many advantages which make it a serious alternative to PVC
panels.
Akylite® has the same rigidity and durability advantages and is a less expensive
alternative for single-face printing, especially designed for the screen and digital
printing markets.
DUCATEX S.A.
Product Details
02.01.007
DUCATEX S.A.
Address
DUCATEX S.A.
Parts made by compression moulding
DUCATEX S.A. - Rubber Molded Articles
Ana Ipatescu 44
077120 Jilava, Ilfov
Romania
Rubber Gaskets
one and double hardness DN: 80 – 1600 mm
Phone
+40 21 4570016
EQUIPMENTS AND MACHINERY:
Fax
+40 21 4570018
extruders co-extruder for double hardness 6 presses
1200 x 1200 1 press 1500 x 1200 1 press 1700 x 1700
60 presses 800 x 800
Internet address
www.ducatex.ro
E-Mail
office@ducatex.ro
Stand
DUAL-HARDNESS EXTRUDER
02.04.001.12
Semi finished products of rubber
DUCATEX S.A. - Rubber Compound
Hall 08b, C28 (Page 890)
DUCATEX can offer a very extensive program of black and colored rubber compound based on SBR, NBR,
EP(D)M, NEOPRENE, NATURAL RUBER.
The factory is able to adapt the working receipts on each customer needs.
Each rubber compound is checked by the QC to comply with the technical features (density, hardness, tensile strength, elongation at break, ageing) according
to the European Standards, before being delivered to all the others department
or to the final customer as unvulcanized rubber compound – in sheets or in strips.
EQUIPMENTS AND MACHINERIES
© 2014 Messe Düsseldorf GmbH
135
© 2014 Messe Düsseldorf GmbH
136
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
5 Farell close mixer lines, 140 liters each2 strainers filters
02.05.056
Product Overview
Foam products
EC Pack (Pump & Valve) Industrial Limited
02.01.001
Parts made by blow moulding
02.01.010
Parts made by injection moulding
02.04.001.07
Semi finished products of polypropylene (PP)
Upper: NATURAL RUBBER - COLOR GREEN, BROWN,
BLACK, DARK GREEN, OLIVE, DARK BLUE
02.05.056
Foam products
Sole: MOLDED SOLE - BEIGE, BLACK;
03.06.001
Injection and compression moulds
03.06.002
Blow moulds
DUCATEX S.A. - Short Lady Boots
Short Rubber Boots hand made, in Natural Rubber. Lady
Boots.
Height: 25 CM
Lining COTTON LINING - WHITE; FUR LINING- WHITE, GREY
The article can be customized.
Product Details
EC Pack (Pump & Valve) Industrial Limited
Address
Flat A, 4/F., Valiant Commercial
Kowloon, Hong Kong
China, Hongkong, Special Administrative Region
Phone
+852 29578208
Fax
+852 29578202
Internet address
www.ec-packing.com
E-Mail
hk@ec-packing.com
Stand
Hall 02, D09 (Page 866)
© 2014 Messe Düsseldorf GmbH
02.01.001
EC Pack (Pump & Valve) Industrial Limited
Parts made by blow moulding
Shampoo Bottles & Closures
02.01.010
Parts made by injection moulding
Dispensing Pump & Cap
137
© 2014 Messe Düsseldorf GmbH
138
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.07
Semi finished products of polypropylene (PP)
Product Overview
Caps
02.05.056
Eder Siebdruck Kunststoffverarbeitung GmbH & Co.KG
Phone
Fax
Internet address
02.01.006
Parts made by mechanical treating
02.01.010
Parts made by injection moulding
02.02.003
Printing
02.02.004
Type printing
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.003.01
Parts from standard plastics
02.05.047
Surface treated and decorated parts
04.05
Subcontracting
Foam products
Foam Bottles & Preforms
Address
Eder Siebdruck Kunststoffverarbeitung GmbH &...
Hirtenstr. 4
76532 Baden-Baden
Germany
+49 7221 9569-0
+49 7221 17538
www.edergmbh.com
E-Mail
info@eder-siebdruck.de
Stand
Hall 08a, F11-7 (Page 894)
Product Details
02.01.010
Eder Siebdruck Kunststoffverarbeitung GmbH &...
Parts made by injection moulding
EDER - Spritzguss
Spritzguss - der Klassiker in unserem Hause. Wir
erstellen die von Ihnen gewünschten Spritzgießwerkzeuge,
die dann mietweise in unserer Fertigung verbleiben.
© 2014 Messe Düsseldorf GmbH
139
© 2014 Messe Düsseldorf GmbH
140
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Die Herstellung der Rohteile kann aus allen gängigen Thermoplasten erfolgen.
Product Overview
02.02.004
Type printing
EDER - Drucktechnik
Industrieller Siebdruck, Runddruck & Tampondruck Sie liefern die Druckdaten - wir kümmern uns um den
Rest. Von der Erstellung der Drucksiebe, über die
Auswahl des geeigneten Farbsystems, bis hin zur Serienfertigung erfolgt die Bearbeitung komplett in unserem Betrieb in Baden-Baden.
02.05.047
Surface treated and decorated parts
Ensinger GmbH
01.01.010.11
Compounds
02.01.002
Products made by extrusion
02.01.004
Products made by calendaring
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.005
Plastics products and parts for household/consumer
EDER - Laserbeschriftung
Der Newcomer in unserem Hause - speziell für
nachträglich zu beleuchtende Anzeigen bieten wir
dieses Verfahren in Verbindung mit siebgedruckten
oder lackierten Oberflächen an.
Ensinger GmbH
Address
Rudolf-Diesel-Str. 8
71154 Nufringen
Germany
02.03.006
Plastics products and parts for electro-/household
appliance
Phone
+49 7032 819-0
02.03.007
Plastics products and parts for electrical engineering
Fax
+49 7032 819-100
02.03.008
Plastics products and parts for data appliance
Internet address
www.ensinger-online.com
02.03.009
Plastics products and parts for agriculture
E-Mail
info@ensinger-online.com
02.03.010
Plastics products and parts for aviation
Stand
Hall 05, D05 (Page 874)
02.03.011
Plastics products and parts for mechanical engineering
© 2014 Messe Düsseldorf GmbH
141
© 2014 Messe Düsseldorf GmbH
142
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
02.05.014
Electrical equipements-parts
02.03.014
Plastics products and parts for food processing
industry
02.05.020
Filters and parts
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.03.015
Plastics products and parts for transport/packaging
02.05.069
Parts of industrial laminates
02.03.016
Plastics products and parts for optics/precision
engineering
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.075.02
Other fibre-reinforced plastic parts
02.05.080
Toothed wheels and racks
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.05
Semi finished products of polyethylene (PE)
Product Details
Ensinger GmbH
02.04.001.07
Semi finished products of polypropylene (PP)
02.01.010
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
Injection Moulded Finished Parts
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
Our customers are offered a wide-ranging selection of high-performance plastics: Polyimid PI, PEEK, PPS, PA46, and many others including individually tailored, filled compounds.
02.04.003.03
Parts from high performance thermoplastics
The most important fields of application for our products include the automotive
industry, medical technology, aerospace and mechanical engineering.
02.04.004
Compounds/Recyclates
02.05.010
Sealing profiles
From the initial idea through to the volume production stage, your individual
requirements form the focus of all our actions. Our engineers offer you their
support in the selection of materials and component design based on the plastic
types used. A team of experienced designers and our own tooling shop are on
hand to offer a precisely dimensioned and economical solution for every application.
Parts made by injection moulding
In our state-of-the-art injection moulding plant in RottenburgErgenzingen, we produce sophisticated precision components and complete assemblies. Together with multicomponent injection moulding, insert/over moulding is also gaining increasingly
in significance.
In respect to products we impose the most stringent standards on quality such
as the residual dirt analysis. Zero defects production is the benchmark we aspire
© 2014 Messe Düsseldorf GmbH
143
© 2014 Messe Düsseldorf GmbH
144
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
to.
Product Overview
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Semi-Finished Engineering Plastics
High quality semi-finished products from plastics fulfill
the specific requirements that customers expect from
quality products. Ensinger offers products from over
100 different plastics. Besides all standard thermoplasts, Ensinger develops
and extrudes a multitude of special materials according to customers´demands.
Round rods, sheets and tubes are offered in a range of small dimensional increments and with special properties to meet your requirements.
Erge-Elektrowärmetechnik Franz Messer GmbH
02.05.032
Laboratory equipment- technical parts
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
03.07.001.01.03
Closed loop control equipment for temperature
03.07.002.03
Driers for bulk materials
03.10.005
Heating elements
Product Details
02.05.032
Erge-Elektrowärmetechnik Franz Messer GmbH
Erge-Elektrowärmetechnik Franz Messer GmbH
Laboratory equipment- technical parts
Granulattrockner
Address
Hersbrucker Str. 29-31
91220 Schnaittach
Germany
Phone
+49 9153 921-0
Fax
+49 9153 921-117
Internet address
www.erge-elektrowaermetechnik.de
E-Mail
info@erge-elektrowaermetechnik.de
Stand
Hall 11, D57 (Page 902)
Mit Granulattrocknern soll in der Kunststoffverarbeitenden Industrie Granulat getrocknet werden.
Der
Feuchtigkeitsentzug erfolgt direkt in der Einzugszone der
Maschine. Das getrocknete und vorgewärmte Granulat wird unmittelbar verarbeitet und kann somit keine
Feuchtigkeit aus der Umgebungsluft mehr aufnehmen.
Wendelrohrpatronen
© 2014 Messe Düsseldorf GmbH
Wendelrohrpatronen zeichnen sich durch ihre Flexibilität und hohe Belastbarkeit aus. Wendelrohrpatronen
kommen zum Einsatz in der Heißkanaltechnik, Extrusion, Verpackungsindustrie, bei der Ölverbrennung und
in der Leuchtenindustrie.
145
© 2014 Messe Düsseldorf GmbH
146
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
auch bei Schlechtwetter die Abluft über die Innenklappen über das Dach abführt.
ESSMANN Lamellengeräte oder Zuluftklappen in der Fassade können die Lüftung ohne Energieaufwand unterstützen.
Essmann GmbH
Address
Im Weingarten 2
32107 Bad Salzuflen
Germany
ESWE-FLEX Walzen GmbH
Phone
+49 5222 791-0
Fax
+49 5222 791-236
Internet address
Address
Hitdorfer Str. 14b
40764 Langenfeld
Germany
www.essmann.de
Phone
+49 2173 3992430
E-Mail
info@essmann.de
Fax
+49 2173 3992455
Stand
Hall 11, E03 (Page 902)
Internet address
www.eswe-flex.de
E-Mail
info@eswe-flex.de
Stand
Hall 10, G34 (Page 900)
Product Overview
Essmann GmbH
03.08.004
Dust and fume extraction systems
02.03.003
Plastics products and parts for building applications
Product Details
02.03.003
Essmann GmbH
Plastics products and parts for building applications
Hybrid-Lüftungskonzept für die Kunststoffindustrie
ESSMANN Hybrid-Lüftung ist die Kombination von natürlicher und maschineller Lüftung. Zum Beispiel wird die
Zuluft maschinell über eine Lüftungsanlage in die Halle
eingebracht. Für eine zugfreie und gezielte Verteilung
im Raum sorgen individuell dimensionierte Luftauslässe vorzugsweise als Gewebeschläuche im Aufenthaltsbereich der arbeitenden Personen. Der thermische Auftrieb – unterstützt durch die maschinelle Zuluft
– sorgt für die natürliche Abluft ohne Energiebedarf. Eine komfortable witterungsunabhängige Lösung dafür bietet die ESSMANN Allwetter-Doppelklappe, die
© 2014 Messe Düsseldorf GmbH
147
Company News
21.07.2013
ESWE-FLEX Walzen GmbH
Neuer Partner Keramikrasterwalzen- und sleeves
Seit dem 01.01.2013 vertreibt ESWE-FLEX Keramikrasterwalzen- und sleeves
von TLS TeroLab Survace GmbH ebenfalls mit Sitz in Langenfeld.
Durch die räumliche Nähe, das enorme Know-How in der Beschichtung und
Lasergravur von TLS bietet ESWE seinen Kunden nun ein außergewöhnliches
Maß an Flexibilität und Leistungsfähigkeit.
© 2014 Messe Düsseldorf GmbH
148
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Eurofoam S.r.l.
Product Overview
ESWE-FLEX Walzen GmbH
02.05.007
Coatings
02.05.013
Printing blankets
02.05.035
Bogie wheels and runners
02.05.076
Rollers and roller coatings
03.10.002
Barrels
03.10.003
Rolls
Product Details
02.05.076
Address
Via Colombo, 12
20020 Lainate / MI
Italy
Phone
+39 02 93796660
Fax
+39 02 93796700
Internet address
www.eurofoam.com
E-Mail
info@eurofoam.com
Stand
Hall 06, D58 (Page 878)
ESWE-FLEX Walzen GmbH
Company News
Rollers and roller coatings
Glätt- und Kühlwalzen
02/08/2013
Eurofoam S.r.l.
SILICONE SOLID AND SPONGE SHEETING ON ROLLS
* Glättwalzen
FOAM AND COMPACT SILICONE ROLLS PRODUCTION We produce FOAM AND COMPACT SILICONE
ROLLS realized by EXTRUSION. We make a semifinished tube product in raw Silicone in different thickness and width through an extrusion machine with a
screw of diameter of 250 mm. At the beginning semifinished product is cut on half and put on a belt where we set the width up; then
the paper is put into the hot air oven for the vulcanization; at the end it goes
to the automatic winder which prepares rolls package. This technology allows
to produce thickness starting from 0.5 mm and different width (till 1400 mm for
some thickness) without any Silicone reject (sheet width has been set before the
vulcanization up). The difference between this technology and the traditional
calender system is that our machine allows to produce widths out of standard
without extra costs, less use of staff and the hot air oven has a faster exchange
of thermal energy which allows a faster vulcanization than a traditional oven.
This oven has also the peculiarity of a very small section room from where the
hot air is concentrated by the ventilation installation with different advantages
like low energy loss and production small spaces request.
* Kühlwalzen
* Heizwalzen
* für den Extruder- und Anlagenbau
Walzenbezüge
Wie bieten Walzenbezüge aus:
* Gummi
* Polyurethan
* Silikon
© 2014 Messe Düsseldorf GmbH
149
© 2014 Messe Düsseldorf GmbH
150
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.04.026
Closed cell foam rubber
We also have a Co-extrusion line (foam + compact rubber with or without metal
insert) and a department with injection molding machines for production of glued
or jointed gaskets by hot molding.
01.05.022
Silicone rubber (SI)
Mix monthly production is about 130000 kg (value taken from first 2011 year
semester).
02.04.001.12
Semi finished products of rubber
02.05.010
Sealing profiles
02.05.056
Foam products
02.05.058
Hoses
02.05.066
Structural foam parts according to sample, drawing or
customers tools
Product Overview
Eurofoam S.r.l.
Our wide range of articles and also 9000 toolings made of E.P.D.M.-C R/NEOPRENE
-N.B.R.-S. B.R.-H.N.B .R.-HYPALO N-VAMAC-NR /PARA-VITO N – PEROXIDE
SILICONE – PLATINIUM SILICONE and FLUOROSILICONE both in foam and
compact rubber
02.05.056
Foam products
EUROFOAM
For a multitude of uses.
Product Details
02.04.001.12
Eurofoam S.r.l.
Semi finished products of rubber
POROCELL
EVA,PE,EPDM NEOPRENE, closed cell foam
Very good physical properties in static and dynamic
field,softness, resilience, thermal deformation, shockabsorption. Thermal insulation, very low water absorption and steam permeability, resistance to atmospheric
agent, no-pollution, chemical-inert.
Applications: Navigation, sports accessories, packing, camping, building and
car industry, gyms,
WE ARE BLOCKS PRODUCER OF SEVERAL TYPES OF
MATERIALS, LIKE EPDM, NBR, CR, SBR AND MANY
MORE....
swimming-pools, lighting, life-jackets etc...
EVACELL Polyethylene foam with EVA, very fine cell,
good elasticity, flexibility and mechanical resistance.
Applications:
Sports, navigation, orthopaedia, gadgets, car, packing, shoes.
02.05.010
Sealing profiles
02.05.058
EXTRUDED RUBBER PROFILES
EXTRUSION RUBBE RPROFILES HOSES
Thanks to a modern firm with 13 technologically advanced extrusion lines, including one reserved to foam
and compact Silicone rolls production.
The technology of microwave vulcanization allows to
heat profile eliminating the long start times with an economical advantage – microwave heating decrease 5
times respect to the hot air heating – It works on at-
Used techniques are molten salts, Microwave and Hot
Air.
© 2014 Messe Düsseldorf GmbH
Hoses
151
© 2014 Messe Düsseldorf GmbH
152
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
mospheric pressure, material quality is very high after
microwave heating. The vulcanization is uniform, there is a better surface appearance. This technology allow to vulcanize profiles with complex shape at
good speed. Benefits of micro-wave vulcanization are: Economy: Micro-wave
allows a saving on energy costs of about 25% Environment: Saving on primary
energy is about 50% with also environmental benefits like lower air emissions
Maintenance and spaces: The easy operation and intervention allows to obtain saving on maintenance costs. Micro-wave machine needs little spaces for
the production than the traditional system. Work and security: Improvements
of working environment regards to cleaning, noise and temperature near the
machine.
02.05.066
Product Overview
Exel Composites GmbH
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
02.05.024
Glass-fibre reinforced plastic parts (GRP)
Product Details
02.04.001.13
Structural foam parts according to sample, drawing or
customers tools
Exel Composites GmbH
Semi-finished parts/products
reinforced plastics
made
from
fibre-
GFK-Profile
EUROFOAM
GFK-Profile sind ein hochwertiges Verbundmaterial mit
hohen Festigkeiten bei vergleichsweise geringem Gewicht.
Die Profile weisen außerdem eine hohe thermische
und elektrische Isolierfähigkeit auf und sind sehr gut
Temperatur- und Witterungsbeständig.
KISS-CUTTING - DIE CUTTING - WATER-JET CUTTING -MILLED - SPLITTING - some of example of working with foams/sponges.
Die Anwendungsbereiche sind sehr vielfältig, u.a. in der Elektrotechnik, Gebäudetechnik, Verkehrstechnik oder im Maschinenbau.
Exel Composites GmbH
Exsto
Address
Industriestrasse-West 8
8605 Kapfenberg
Austria
Address
55 avenue de la Déportation
26100 Romans-sur-Isere
France
Phone
+43 3862 33180
Phone
+33 4 75727272
Fax
+43 3862 3318025
Fax
+33 4 75722611
Internet address
www.exelcomposites.com
Internet address
www.exsto.com
E-Mail
office.kapfenberg@exelcomposites.com
E-Mail
info@exsto.com
Stand
Hall 05, F30-15 (Page 874)
Stand
Hall 05, D04-2 (Page 874)
© 2014 Messe Düsseldorf GmbH
153
© 2014 Messe Düsseldorf GmbH
154
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.016
Plastics products and parts for optics/precision
engineering
02.04.001.10
Semi finished products of polyurethane (PUR)
02.04.003.02
Parts from engineering plastics
Exsto houses several departments dedicated to the
design, development and production of innovative solutions for all industries (Oil & Gas, Automotive, Aeronautic, Heavy Equipment, Hydraulics Networks, Processing Industry, Wind Energy, Special Machine Tools, etc.)
02.05.012
Torsion vibration damper / Vibration damper / -isolation
02.05.028
Rubber / plastics / metal combinations
We have several locations around the world (France, UK, USA, Germany, Brasil,
China)
02.05.035
Bogie wheels and runners
We are certified ISO 9001 and ISO 14001
Product Details
UREFLEX and ELADIP are our Trademarks
02.01.010
Company News
07/30/2013
Exsto
POLYURETHANE CASTING
Exsto specialises in the design and manufacture of
techical and semi-finished parts in polyurethane and
thermoplastic components
Exsto
Parts made by injection moulding
PLASTICS PARTS FOR ALL INDUSTRIES
Product Overview
Exsto
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.002
Plastics products and parts for automotive
PLASTICS PARTS FOR PRODUCTION LINES
© 2014 Messe Düsseldorf GmbH
02.03.010
155
Plastics products and parts for aviation
CUSHIONS FOR ELASTOFORMING
© 2014 Messe Düsseldorf GmbH
156
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.011
Plastics products and parts for mechanical engineering
CUSTOMIZED PARTS
02.04.001.10
Semi finished products of polyurethane (PUR)
F.W. Breidenbach GmbH & Co. KG
Address
Raiffeisenstr. 4
63589 Linsengericht-Lützelhausen
Germany
Phone
+49 6051 9613-0
Fax
+49 6051 9613-13
Internet address
www.fwbreidenbach.de
E-Mail
fwb@fwbreidenbach.de
Stand
Hall 02, E05 (Page 866)
TUBES, PLATES, ETC.
02.05.012
Torsion vibration damper / Vibration damper / -isolation
Product Overview
F.W. Breidenbach GmbH & Co. KG
DAMPER FOR HEAVY EQUIPMENTS
02.05.035
Bogie wheels and runners
WHEELS AND ROLLERS
© 2014 Messe Düsseldorf GmbH
157
02.01.010
Parts made by injection moulding
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.011
Sealings/Sealrings
© 2014 Messe Düsseldorf GmbH
158
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
F.W. Breidenbach GmbH & Co. KG
Product Overview
02.01.010
Spritzgieß - Formartikel
Wir fertigen Spritzguß - Formartikel von 0,1 bis 1250
Gramm Schußgewicht auf einen Maschinenpark von 20
bis 350 to. Schließkraft. Unsere Produkte finden überwiegend Anwendung in den Industriebereichen Automotive,Sanitär, Eisenwaren, Elektro, Haushalt, Spielwaren, Modellfahrzeuge, Möbel und im technischen
Handel.
Ferdinand Stükerjürgen GmbH & Co. KG
Kunststoffwerk
Address
Ferdinand Stükerjürgen GmbH & Co. KG...
Parts made by injection moulding
Grüner Weg 4
33397 Rietberg-Varensell
Germany
02.01.002
Products made by extrusion
02.01.003.02
by hand lay-up
02.01.003.03
by pultrosion
02.01.003.04
by RTM
02.01.010
Parts made by injection moulding
02.01.011
Parts made by termoforming
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
Phone
+49 5244 404-0
02.04.003.03
Parts from high performance thermoplastics
Fax
+49 5244 404-244
02.05.024
Glass-fibre reinforced plastic parts (GRP)
Internet address
www.fs.stuekerjuergen.de
Product Details
E-Mail
verkauf@stuekerjuergen.de
Stand
Hall 05, D15 (Page 874)
02.01.002
Ferdinand Stükerjürgen GmbH & Co. KG...
Products made by extrusion
Herausragende Profile durch Extrusion
Die Extrusion von Profilen aus harten und weichen thermoplastischen Kunststoffen ist das Verfahren, mit dem
die Geschichte des Unternehmens Ferdinand Stükerjürgen 1967 begann.
Ferdinand Stükerjürgen fertigt Profile in allen Varianten:
Breiten bis zu 700 mm Profilgewicht von 10 gr – 6000
gr/mtr Direkte Konfektionsarbeit z. Bsp.: Bohren, Stanzen und Bedrucken
Ferdinand Stükerjürgen - Lösungen für jede Anforderung
© 2014 Messe Düsseldorf GmbH
159
© 2014 Messe Düsseldorf GmbH
160
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Extrusion und Coextrusion aus allen Thermoplasten, auch verstärkt Extrusion von Profilen aus geschäumtem Hart-PVC Coextrusion und MehrschichtCoextrusion in Kombination mit harten oder weichen Kunststoffen Silikonprofile
Inline-Konfektion
02.01.010
Parts made by injection moulding
Spritzgießen -
Product Overview
Fiberflon A.S.
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.05.021
Conveyor belts
02.05.030
Laminated fabric and laminated paper
eine Technik mit vielfältigen Möglichkeiten
Seit über 40 Jahren fertigt das Unternehmen Ferdinand Stükerjürgen Produkte im Spritzgussverfahren.
Diese langjährige Erfahrung kombiniert mit den gestiegenen Ansprüchen an die
Wiederhol- und Passgenauigkeit, die Maßhaltigkeit und Farbtreue lässt perfekte
Spritzgussartikel entstehen.
Kompakt- und Strukturschaum-Spritzgussverfahren Stückgewicht von 0,1 g 6000 g Silikon – Spritzgussartikel Gasinnendruckverfahren (GID) Insert- und
Outserttechnik Glasfaser,- glaskugel- oder mineralverstärkt Veredelung durch
Galvanisieren oder Lackieren
Fiberflon A.S.
Address
Corlu-Cerkezkoy Yolu 7. Km
59860 Corlu, Tekirdag
Turkey
Phone
+90 282 6764208
Fax
+90 282 6764198
Internet address
www.fiberflon.com
E-Mail
info@fiberflon.com
Stand
Hall 08a, G39 (Page 894)
© 2014 Messe Düsseldorf GmbH
Product Details
02.04.001.09
Fiberflon A.S.
Semi finished products of polytetrafluorethylene
(PTFE)
Fiberflon PTFE (Teflon) Coated & Laminated Composites
Fluoropolymer Coated and Laminated Composites, produced by FIBERFLON, are widely used for manufacturing of Non-Metallic Expansion Joints, Insulation Jacketing and Floating Roof Seals for oil storage tanks.Our
PTFE(Teflon) fiberglass composites and laminates are
engineered to survive corrosive environments and severe temperatures.
PTFE / Glass Fabrics with Pressure Sensitive Adhesives
Woven glass fabric coated with PTFE (TEFLON) (polytetrafluoroethylene) and silicone pressure sensitive adhesive which provides an excellent release surface for
a diversity of industrial applications requiring high temperature, electrical resistance, mechanical strength,
fire retardancy and cost effectiveness.
These products are produced with either silicone or acrylic pressure sensitive
adhesive system. The silicone adhesive coated products have a continuous
operating temperature range between -70°C and +260°C while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance
and a continuous service temperature range of -40°C to +170°C.
161
© 2014 Messe Düsseldorf GmbH
162
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.021
Conveyor belts
02.05.030
Laminated fabric and laminated paper
PTFE (Teflon®) Coated Glass Fabrics
Conveyor Belts from PTFE-Glass and Kevlar Fabrics
PTFE-Polytetrafluorethylene (Teflon®) can truly be described by that much used world ”unique”. No other
plastics material can match its combination of properties. FIBERFLON® high performance products are typically composed of woven glass fibers coated with PTFE
(Teflon®).
FIBERFLON® is also the name of leadership in manufacturing process belts. We have developed a new form
of dryer belt under the brand name of FIBERFLON®
enabling a diversified application range for the textile
world.
Fiberflon® belts are delivered ready for installation with
seam and edge reinforcement. Several type of seams,
joints, splice and edge reinforcements are available according to process type.
Fiberflon has developed a full range of open-mesh belting products specifically
for Textile and Screen Printing Dryers.
PTFE Coated Open-Mesh Belting Fabrics
Silicone Baking Mats / Sheets
SILICONE BAKING MAT is a liner made of silicone and fiberglass which replaces
the need for parchment paper. The non-stick surface allows baked goods to
slide off the mat after baking without the need for a spatula. The mat serves
double-duty as a non-stick surface for rolling out sticky dough or candies. Some
of standard sizes – 400 mm x 300 mm – 585 mm x 285 mm. All other sizes are
possible to produce.
Silicone Rubber Coated Glass Fabrics
Fiberflon® has developed a full range of open-mesh
belting products specifically for Textile and Screen Printing Dryers.
Glass fabrics coated on both side with silicone rubber. On request, one side
silicone rubber coated products are also available.
Fiberflon silicone coated fabrics can be used a wide range of industrial applications, such us; Shrink Tunnels; Foam Manufacturing; Electrical Insulation Tapes;
Conveyor Belts; Safety Curtains; Release and Seperator Sheets; Gasketing.
Fiberflon open mesh belts are used in screen printing to
transport imprinted materials through drying ovens and
cooling chambers. These belts are long lasting and perform well over a wide range of operating temperatures.
Fiberflon belt fabrication department can supply a wide variety of splices and
edge reinforcements in order to respond customer’s specific applications. Different constructions of open mesh fabrics are available with Kevlar , Nomex and
Fiberglass.
Fiberflon manufactures also silicone glass fabrics with one side pressure sensitive adhesive.
Fiberflon pressure sensitive silicone tapes can be used on mechanical, electrical
and industrial applications. (Plasma Spray Masking Tapes or Hi-Friction Tapes)
Fiberflon open mesh belts are used in textile dryers to transport fabrics through
drying ovens and cooling chambers.
© 2014 Messe Düsseldorf GmbH
163
© 2014 Messe Düsseldorf GmbH
164
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
09/24/2013
FIPA GmbH Vakuum- und Greifertechnik
Address
Freisinger Str. 30
85737 Ismaning
Germany
Phone
+49 89 962489-0
Fax
+49 89 962489-11
Internet address
www.fipa.com
E-Mail
info@fipa.com
Stand
Hall 10, C27 (Page 900)
FIPA in Automation: Flexible Vacuum Grippers for
Precise Handling of Precast Concrete Units
When FIPA’s clients look for solutions, we deliver with
innovative and customized products. Learn how we
partnered with one of our clients to develop a customized gripper for the production of multi-layer concrete components. The entire project was nominated
for the 2013 BAUMA Innovation Award - an honor presented every 3 years to top
companies which showcase groundbreaking developments in machinery and
equipment for construction, building materials and mining.
The Client:
A leader in conception, design and implementation of production plants for the
precast concrete element industry, FIPA’s client was looking for flexible vacuum
grippers to handle wall cladding components in their production plant. The client
chose FIPA as a project partner because of its flexibility and expertise in the
vacuum gripper and End-of-Arm-Tooling industry.
The Problem:
Company News
07/03/2013
FIPA GmbH Vakuum- und Greifertechnik
Bellows vacuum cups made of Varioflex® composite
material
Multi-layer concrete components are often used in industrial and commercial
buildings and in prefabricated houses to reduce construction time and building costs. Manufacturing concrete components with natural stone or plastic tile
cladding involves extremely high staff costs. Manual tile application also causes
the dimensional accuracy of the precast components to fluctuate.
The robust Varioflex® bellows vacuum cups are designed for automation applications where a strong
holding force and a long cycle life are a must in addition to fast cycle times.
Until now, no fully automated system on the market was capable of assembling
these multi-layer concrete components with the required level of precision and
flexibility. Our client was looking for flexible vacuum grippers to handle wallcladding components in their production plant.
The special polyurethane in different hardness levels
combines the wear resistance of plastic with the elasticity of rubber.
The Specifications:
Your benefits:
- Long service life & low wear: The vacuum cups made of special polyurethane
are extremely resistant to wear - Fast cycle times and high process reliability: The stable body (60° Shore) will impress you with its outstanding resetting
qualities and high stability, which prevents it from crumpling around the sides Silicone-free & low-marking: Ideal for products that are still being coated or that
have already undergone surface finishing - Oil and ozone-resistant
The specifications provided by our client required tiles/bricks between 40 x 80
mm and 700 x 1600 mm to be handled using multiple single-sized vacuum grippers without changing tools. The ability to securely grip partial segments as well
as whole bricks was also essential.
Due to the system dynamics, there were extremely high demands on the vacuum
gripper’s holding capacity: A Cartesian robot picked up the tiles horizontally
from the material feed and carried them to the concrete component, where it
deposited them with a high degree of precision. The robot axes moved at speeds
of up to 4 m/s and acceleration could reach up to 3 m/s.
The Solution:
© 2014 Messe Düsseldorf GmbH
165
© 2014 Messe Düsseldorf GmbH
166
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
To match the clients unique requirements, FIPA developed a custom vacuum
gripper within a very short period of time. Comprehensive testing determined
the ideal vacuum gripper for the shape and weight of the bricks. It was important
to ensure, that the vacuum duct holes did not line up with the tile grooves. The
ability of the gripper to function reliably with a partial load was also successfully
demonstrated. This is a standard feature in all FIPA vacuum grippers which
included special ball valves seal off the intake ducts in the unused suction areas.
A special feature of the FIPA design prevented the intake ducts and ball valves
from becoming blocked by dust, which is extremely pervasive in construction
industry applications. The large diameter of the holes and balls allowed the dust
to pass through the gripper unimpeded. Highly wear-resistant and age-resistant
suction mats that were tailored exactly to the requirements of the construction
industry were another feature of FIPA’s custom vacuum gripper solution.
Product Overview
At FIPA you benefit from:
the largest assortment in the world of vacuum cups for material handling, automation and robotics technology, a selection of special materials for high temperature applications that enable the parts to be painted afterwards , a range of
vacuum cup accessories ideally matched to your needs: suction fingers, spring
plungers, fittings etc., many years of experience in the development of vacuum
cups, personal consultation, design and manufacture of special vacuum cups
FKT Formenbau und Kunststofftechnik GmbH
Address
Jahnstr. 2
07819 Triptis
Germany
Phone
+49 36482 87-0
Fax
+49 36482 87-188
Internet address
www.fkt-triptis.de
E-Mail
fkt@fkt-triptis.de
Stand
Hall 08a, F11-9 (Page 894)
FIPA GmbH Vakuum- und Greifertechnik
02.05.050
Parts for pumps
02.05.055
Suction cups
02.05.073
Valves
03.07.001.01.02
Closed loop control equipment for pressure
03.07.003.01
Handling devices
Product Details
02.05.055
ribs. FIPA offers complete solutions for every task in the plastics industry .
FIPA GmbH Vakuum- und Greifertechnik
Suction cups
FIPA Vacuum Cups
Process-oriented, fast, reliable
All vacuum cups have the same function in “Pick & Place”
technology: Lifting and shifting parts. The vacuum cups used
are entirely different depending on the shape, size and material of the objects to be handled: While one type is flat, the
other has folds. Yet another type is oval or has supporting
© 2014 Messe Düsseldorf GmbH
167
© 2014 Messe Düsseldorf GmbH
168
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
FKT Formenbau und Kunststofftechnik GmbH
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.012
03.06.001
Address
Manston Road
CT12 6HW Ramsgate, Kent
Great Britain / Northern Ireland
Phone
+44 1843 854000
Fax
+44 1843 854010
Internet address
www.flambeau.co.uk
E-Mail
eusales@flambeau.com
Stand
Hall 07.2, A20 (Page 888)
Plastics products and parts for medical engineering
Injection and compression moulds
Product Details
02.01.010
FLAMBEAU
FKT Formenbau und Kunststofftechnik GmbH
Product Overview
Parts made by injection moulding
FLAMBEAU
Spritzgussteile
02.01.001
Parts made by blow moulding
Herstellung von Kunststoffteilen für diverse Branchen, wie Automobilbau, Elektround Elektronik-, Haushaltgeräte- und Optikindustrie, Medizintechnik, Sanitärtechnik sowie Telekommunikation.
02.01.010
Parts made by injection moulding
Folgende Technologien werden angewandt:
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.005
Plastics products and parts for household/consumer
02.05.067
Tanks
02.05.072
Ventilator parts
- Montagespritzgießen
- Spritzgießen in Mehrkomponententechnik
- Verarbeitung aller Hochtemperaturkunststoffe
- Gasinnendruckspritzgießen
- Montieren, verkleben verschweißen, bedrucken
- Zerspanende Herstellung durch 5-Achs- und Drehfräsen
- Serienfertigung auf Spritzgießmaschinen von 35 – 1.100 t Schließkraft
© 2014 Messe Düsseldorf GmbH
169
© 2014 Messe Düsseldorf GmbH
170
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.01.001
FLAMBEAU
Parts made by blow moulding
Flambeau Fluids
Flambeau Fluid Systems, a division of Flambeau®, Inc manufactures stock, customized stock, custom tanks, caps, fittings, and components. We are the industry leader in proprietary and custom tanks used in wide variety of equipment
and vehicles. Our products are frequently used for radiator overflow, coolant
recovery, hydraulic reservoirs, fuel tanks including CARB/EPA compliant fuel
systems and windshield washer systems. Flambeau offers a wide range of secondary processes including plastic welding, assembly, and decorating, while
specializing in meeting the needs of your application from a single component
to a complete value added assembly.
02.01.010
ArtBin® is the industry leader for innovative craft, hobby
and art storage with its extensive line of molded storage
boxes and soft-side products for at home or on the go!
With versatility being a key factor, ArtBin storage products unique designs allow
YOU to customize your storage solution to what best fits your needs!
Duncan Toys
Duncan® yo-yos are widely recognized as the finest yoyos in the entire world.
Since 1929, the name ”Duncan” has been synonymous with ”yo-yo” across the
United States.
Started in 1929 when entrepreneur Donald F. Duncan Sr. purchased the Flores Yo-Yo Company from Filipino immigrant Pedro Flores, Duncan Yo-Yos are
an indelible part of American history. Promoted across the entire United States
continuously from the late ’20s to the mid ’60s, owning a Duncan yo-yo and seeing the official Duncan Yo-Yo Man perform was an inimitable part of childhood.
Parts made by injection moulding
Flambeau Outdoors
Flambeau Outdoors has a legacy built on quality hunting and fishing products. From a small bait called the
”Halik Frog” we have grown into the premiere manufacturer of outdoor decoys, calls and gear for every season.
Purchased by current owners Flambeau® Inc. in the late 1960s, Duncan continues to set the standard by which all yo-yos are judged.
Stadium Building Products
Folienwerk Wolfen GmbH
Stadium Building Products has been supplying the construction industry with leading quality innovative products for over 100 years. With a broad portfolio of ventilation and building products including buckets & tubs,
tools & hardware and general accessories. Stadium accomdates short lead times along with competitive pricing, while shaping the products of tomorrow in plastic.
Address
Guardianstr. 4
06766 Bitterfeld-Wolfen
Germany
Phone
+49 3494 6979-0
The Neat Nursery Co.
Fax
+49 3494 6979-37
The Neat Nursery Co. is recognised as one of the leading UK manufacturers of plastic moulded baby products
and factored complimentary ranges.
Internet address
www.folienwerk-wolfen.de
E-Mail
info@folienwerk-wolfen.de
Stand
Hall 08b, D58 (Page 890)
02.03.005
Plastics products and parts for household/consumer
ArtBin
© 2014 Messe Düsseldorf GmbH
171
© 2014 Messe Düsseldorf GmbH
172
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
Folienwerk Wolfen GmbH
Product Overview
18.07.2013
EVA-Folie evguard® für Sicherheitsglas und
dekoratives Verbundglas
Folienwerk Wolfen GmbH
02.01.002
Products made by extrusion
Die neu ins Produktprogramm aufgenommene EVAFolie evguard® überzeugt mit hoher Transparenz und
hervorragenden Verarbeitungsmöglichkeiten bereits bei
niedrigeren Temperaturen.
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
Wird Glas in der Architektur verwendet, beispielsweise
Verbundglas oder Verbund-Sicherheitsglas (VSG), so
ist eine Stabilisierung erforderlich. Die dazu speziell
hergestellte EVA-Laminierfolie evguard® eignet sich für diese Aufgabe dank
ihrer mechanischen Festigkeit, Beständigkeit gegenüber Wärme und Feuchtigkeit
sowie einer flexiblen Verwendbarkeit. Sie verfügt über ein außergewöhnlich
gutes Aufschmelzverhalten und ist daher leicht zu verarbeiten. Auch ein Einsatz im Zusammenhang mit temperaturempfindlichen Interlayern ist möglich.
Das breite Produktspektrum des Folienwerks umfasst auch Interlayer-Folien für
dekorative oder sicherheitsrelevante Anwendungen.
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.005
Plastics products and parts for household/consumer
02.03.012
Plastics products and parts for medical engineering
02.04.002
Films
Weniger Material – mehr Sicherheit
02.05.068
Technical films
Bereits bei Einsatz einer nur 380 µm starken evguard®-Folienlage ist eine hohe
Stabilität der Verbundsi-cherheitsgläser gegeben. Das erlaubt nicht nur den
effizienten Einsatz der Folie, sondern erfüllt höchstmög-liche Anforderungen
im Sicherheitsbereich wie den Pendelschlagtest nach DIN EN 12600 und den
Kugelfall-test in Anlehnung an DIN EN 14449.
Viele Einflüsse – wenig Spuren
Dank der gemäß DIN EN 12543-4 zertifizierten Beständigkeit gegen Hitze,
Feuchtigkeit und UV-Strahlung ist der Einsatzbereich der evguard®-Laminierfolie
vielfältig. Dabei punktet die Folie vor allem dort, wo sie länger halten muss, was
sie verspricht: Funktion und Optik werden nicht beeinträchtigt. Zudem bietet
die EVA-Folie einen hervorragenden Lärmschutz, zertifiziert nach ISO 101402. Bei Verwendung eines Verbundsicherheitsglases mit dem Aufbau 44.2 wird
ein Luftschalldämm-Maß von mindestens 36 dB erreicht – ohne zusätzliche
schalldämmende Schichten.
Product Details
02.01.002
Folienwerk Wolfen GmbH
Products made by extrusion
Coextruded film
As specialist producer of made to measure plastics film, FWG offers a large
portfolio of coextruded films manufactured from polyester (A-PET, G-PET, GAGPET) and polycarbonate (PC). FWG noticed very early the demand for sustainable films and specialised in R-PET film made from 85% recycled material. The
company also offers films produced from the renewable resource PLA (polylactic
acid) as a sustainable alternative especially to PVC film.
02.03.002
Plastics products and parts for automotive
Polycarbonate film
Polycarbonate (PC) is a plastic material which is highly resistant to thermal and
mechanical stress and has an excellent transparency. It is suitable for films
which need to be highly resistant against impacts, scratches and heat.
© 2014 Messe Düsseldorf GmbH
173
© 2014 Messe Düsseldorf GmbH
174
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.002
Films
foxiflex GmbH & Co. KG
Made to measure films
Made to measure films for different application are the speciality of Folienwerk
Wolfen.
Address
Rietzer Berg 11
14797 Kloster Lehnin
Germany
Phone
+49 3381 21121-0
Fax
+49 3381 21121-40
Internet address
www.foxiflex.com
E-Mail
info@foxiflex.com
Stand
Hall 08b, E61-2 (Page 890)
This is why films manufactured from the following materials are available:
- PET-A, -G, GAG
- PET-R
- PC
- PLA
- PVC
- EVA
- and others on request
02.05.068
Technical films
EVA film for safety glass and glass for decoration
In the architecture and solar sectors, Folienwerk Wolfen is positioned with special films made from the copolymer ethylene vinyl acetate (EVA).
Product Overview
FWG’s laminating film “evguard” has been developed for the production of safety
glass, sound insulation glass and laminated glass for decoration. Compared to
other films used in these areas, evguard-films convince with high elasticity and
high adhesion.
02.05.058
Hoses
02.05.075.01
Fibreglass-reinforced plastic parts
EVA laminating film for solar modules
03.07.002.05.01
Volumetric dosing and metering equipment
FWG is offering an EVA-film for encapsulation for the solar industry, securely
enclosing the solar cell to protect it from external influences, i.e. humidity.
Product Details
At the same time, the film has a very high degree of transparency, satisfying
the important requirement of easy light transmission for solar modules with high
light yield.
02.05.058
foxiflex GmbH & Co. KG
foxiflex GmbH & Co. KG
Hoses
foxifPro PUR H
high abraison resistant transport hose for normal plastic
granules
material: 100% original PUR
wallthickness: approx. 1,45 mm
also in FDA approval version available
© 2014 Messe Düsseldorf GmbH
175
© 2014 Messe Düsseldorf GmbH
176
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
foxiSpecial PUR H-AL-F
special hose for transport of granules in food-industry
Product Overview
materiall: PUR, FDA approval and antistatic (according
to ATEX)
02.01.002
Products made by extrusion
wallthickness: approx. 1,45 mm
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.03.003
Plastics products and parts for building applications
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.05.002
Armatures and parts
02.05.006
Cointainers
02.05.011
Sealings/Sealrings
03.05.001
Hot-plate welding machines
03.05.005
Hot gas welding machines
03.05.007
Extrusion welding machines
02.05.075.01
Fibreglass-reinforced plastic parts
Frank GmbH
foxiPro PUR XXL
extremly robust and highly abraison resistant hose for
transport of glass fibre granules
material: 100% originale PUR
wallthickness: approx.3,5 mm
inside very soft and extremely flexible
Frank GmbH
Address
Starkenburgstr. 1
64546 Mörfelden-Walldorf
Germany
Phone
+49 6105 4085-0
Fax
+49 6105 4085-249
Internet address
www.frank-gmbh.de
E-Mail
info@frank-gmbh.de
Product Details
02.05.006
Frank GmbH
Cointainers
PE100 und PE100RC
Stand
Hall 05, C02 (Page 874)
© 2014 Messe Düsseldorf GmbH
Durch die Verwendung hochwertiger Werkstoffe und
ständige interne und externe Produktionskontrollen schaffen wir die Grundlage für den Erfolg Ihrer Produkte. Der
aus der Gas- und Trinkwasserversorgung bekannte Werkstoff PE 100 RC (Resistent to Crack) bietet hervorragende Langzeiteigenschaften für Ihre Produkte.
177
© 2014 Messe Düsseldorf GmbH
178
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Alle unsere PE 100 und PE 100-RC Platten besitzen die notwendige Zulassung* des Deutschen Instituts für Bautechnik für den prüfpflichtigen Behälterbau. Zusätzlich sichern wir unseren hohen Qualitätsstandard durch ständige
Produktionskontrollen und durch externe Prüfungen.
Fraunhofer Institut für Chemische Technologie ICT
Address
Joseph-von-Fraunhofer-Str. 7
76327 Pfinztal
Germany
Phone
+49 721 4640-0
Dichtungsbahnen
Fax
+49 721 4640-111
Wir führen hochwertige, regranulatfreie Dichtungsbahnen aus PEHD, PELD, PEVLD bzw. PP in Stärken
von 0,5 bis 4 mm. Die Bahnen erfüllen verschiedene
Normen, die vor allem im Behälterbau und im Deponiebereich von Bedeutung sind (z.B. NRW-Richtlinie,
ab 2 mm auch mit DIBt-Zeugnis, ab 2,5 mm auch
nach BAM-Norm). Als Durchwurzelungsschutz für Versorgungsleitungen u.ä. lagern wir auch zugeschnittene
PE-Bahnen in 1,25 und 2,5 x 100 m.
Internet address
www.ict.fraunhofer.de
E-Mail
info@ict.fraunhofer.de
Stand
Hall 07, B05 (Page 884)
*PE 100 und PE 100-RC in den Dicken 5-40 mm
02.05.011
Sealings/Sealrings
Product Overview
Diese nahtlos extrudierten Bahnen werden von zertifizierten Fachverlegern (z.B.
nach WHG § 19) mittels Heizkeilschweißverfahren verschweißt, um eine jederzeit sichere Abdichtung zu gewährleisten. Anders als Bentonitmatten, die erst
durch den Kontakt mit Wasser dicht werden, können Dichtungsbahnen auch
bei extremen Naß-/Trockenwechseln und zur Abdichtung gegen nicht wasserhaltige Flüssigkeiten (z.B. Treibstoffe/Öle o.ä.) verwendet werden. Es gibt
für die Deponiebahnen laufende Langzeitbewitterungversuche, bei denen über
Jahrzehnte hinweg die Restfestigkeit geprüft wird.
© 2014 Messe Düsseldorf GmbH
179
Fraunhofer Institut für Chemische Technologie ICT
01.01.010.02
Bioplastics, Renewable based
01.01.023
Electrically conductive plastics
01.03.043
SMC (sheet moulding compounds)
01.04.016
Polypropylene-foams (EPP)
01.04.017
Polystyrene foams
02.01.003.04
by RTM
02.01.007
Parts made by compression moulding
© 2014 Messe Düsseldorf GmbH
180
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.01.009
Parts made by foaming
02.01.010
Parts made by injection moulding
03.02.002.01.04
Injection moulding machines above 4000 kN to 10000
kN clamping force
03.02.002.02
Injection moulding machines, multi-component
03.02.005.01
Preexpanders, foaming machinery for parts and blocks
(for EPS, EPP, EPE)
03.04.005
Coating plant
03.09.009
Plastic types identification equipment
04.06
Science and consulting
02.01.011
Parts made by termoforming
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.006
Plastics products and parts for electro-/household
appliance
02.04.003.03
Parts from high performance thermoplastics
02.04.004
Compounds/Recyclates
02.05.007
Coatings
Product Information
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.05.069
Parts of industrial laminates
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.075.02
Other fibre-reinforced plastic parts
In the Polymer Engineering Department our experienced researchers carry out intensive application-oriented
research in the fields of plastics and pilot-level product
development. In thematically-focused research groups
they develop new processes and materials in order to
produce lightweight structural and semi-structural plastic components. Emphasis is placed on energy- and resource-efficient manufacturing processes for the
large-scale production of lightweight structures in the mechanical engineering
and vehicle construction sectors.
03.02.001.01.02
Extruders, twin screw type
03.02.002.01.02
Injection moulding machines above 250 kN to 1000 kN
clamping force
Product Details
02.03.002
Fraunhofer Institut für Chemische Technologie ICT
Plastics products and parts for automotive
Research in the field of thermoplastic processing is currently based on three
approaches: the direct processing of long-fiber-reinforced thermoplastics (LFTD) in combination with compression molding (LFT-D-CM) and injection molding
technology (injection-molding compounding process LFT-D-IM), the processing
and functionalization of local continuous-fiber reinforcements, and thermoplastic
foam injection molding using chemical and physical blowing agents.
Material development plays an important role in the day-to-day research work.
The researchers in the Polymer Engineering Department aim to produce compounds with exceptional properties. In the field of nanotechnology, for instance,
the electrical conductivity of the material is tested, or novel processes are developed, for example to reduce unpleasant smells or to incorporate natural ma-
© 2014 Messe Düsseldorf GmbH
181
© 2014 Messe Düsseldorf GmbH
182
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
terials without damaging them. The broad and continually widening application
spectrum for particle foam components, and the high demands placed on them,
increasingly require tailored, high-quality material combinations and processing
technologies.
Nobelstr. 12
70569 Stuttgart
Germany
Phone
+49 711 9704137
Fax
+49 711 9704200
Internet address
www.igb.fraunhofer.de
E-Mail
info@igb.fraunhofer.de
Stand
Hall 07, B05 (Page 884)
Company News
10/14/2013
10/10/2013
Fraunhofer-Institut für Grenz- flächen- und...
Reactive toner particles
Laser printing is a highly attractive technique for the
straight-to-point functionalization materials. The laser
printing system is maintenance-free and solvent-free,
offers a high resolution, and the material transfer related to the solid content is significantly higher than in
inkjet printing. At the Fraunhofer IGB spherical toner
particles are developed by means of suspension polymerization and are to be applied for processing of various functional components. Our toner material is cell-compatible. The toner particles can be synthesized with reactive surfaces for example for coupling reactions before or after the
printing process. This reactive surface can also be taken for the combination of
© 2014 Messe Düsseldorf GmbH
10/10/2013
Anti-icing coatings
With the aid of plasma technology, the Fraunhofer
IGB has developed an anti-icing coating for polymeric
surfaces. Water-repellent micro- and nanostructured
coatings are applied to polymer foils made of impactresistant and shockproof polyurethane (PU), where the
anti-ice finish reduces the ice’s adhesion by over 90
percent. Optimization of various process parameters
has made it possible to produce ultra-thin coatings only a few nanometers thick,
these coatings repel water from the surface. The nanostructured foil can be
glued onto the rotor blades, wings of airplanes, solar panels, and power lines.
Fraunhofer-Institut für Grenz- flächen- und
Bioverfahrenstechnik IGB
Address
different materials and therefore for the creation of three-dimensional structures.
183
Combined coatings: Barriers and improved emptying
behavior
The Fraunhofer IGB is using plasma technology to produce inorganic barrier coatings that act to block oxygen or water vapor
and thus protect the product from oxidation or moisture. These
glass-like barrier layers can be combined with a further layer that
improves draining of the product when the packaging is emptied. The combined multifunctional coatings are ideal for plastic
bottles for food that is oxygen-sensitive and viscous, such as
ketchup, as well as for canisters in which chemicals are stored.
They are also suitable for protein-based medicines that are still
filled in small glass containers, despite the risk of breakage.
10/10/2013
Testing and evaluation of antimicrobial surfaces
Development of biofilms is expensiv and dangerous.
Surface modifications and modern inactivation procedures are effective for their prevention. The staff of the
Fraunhofer IGB characterize antimicrobial surfaces by
physical and chemical methods. The biological testing
and characterization is carried out by living systems.
This means selection of the microorganisms used for
testing as well as the method and the development and construction of testing
procedures.
© 2014 Messe Düsseldorf GmbH
184
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
Fraunhofer-Institut für Grenz- flächen- und...
Product Overview
Fried Kunststofftechnik GmbH
01.01.010.02
Bioplastics, Renewable based
02.01.010
Parts made by injection moulding
01.06.005
Carbon fibres (CF)
02.03.002
Plastics products and parts for automotive
02.02.001
Vapour-deposit decorating
02.03.007
Plastics products and parts for electrical engineering
02.02.003
Printing
02.03.010
Plastics products and parts for aviation
02.05.007
Coatings
02.03.011
Plastics products and parts for mechanical engineering
02.05.041
Membranes
02.03.012
Plastics products and parts for medical engineering
02.04.003.01
Parts from standard plastics
02.05.023
Casings and cabinets
02.05.025
Handles
02.05.047
Surface treated and decorated parts
Fried Kunststofftechnik GmbH
Address
Wasenstr. 90
73660 Urbach
Germany
Phone
+49 7181 8000-0
Fax
+49 7181 8000-15
Internet address
www.fried.de
E-Mail
info@fried.de
Stand
Hall 08a, F11-6 (Page 894)
Product Details
02.01.010
Fried Kunststofftechnik GmbH
Parts made by injection moulding
Well thought - well done.
© 2014 Messe Düsseldorf GmbH
Products can only be as good as their mould - be it in
short runs or mass serial production. This is why the
mould flow study precedes the actual mould making.
Simulated mould-filling technique helps determine the
optimum point of injection and a high degree of perfection. After all, it will be the moulds and not the engineers
that will be finally put under pressure. In some cases, they need to withstand
pressures more than 30,000 kN.
185
© 2014 Messe Düsseldorf GmbH
186
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.002
Plastics products and parts for automotive
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
02.03.007
Plastics products and parts for electrical engineering
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
© 2014 Messe Düsseldorf GmbH
187
02.03.010
Plastics products and parts for aviation
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
02.03.011
Plastics products and parts for mechanical engineering
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maxi-
© 2014 Messe Düsseldorf GmbH
188
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
mum of economic efficiency in our production runs.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
ficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
02.03.012
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
Plastics products and parts for medical engineering
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
02.05.023
Casings and cabinets
Schutzvorrichtungen für Holzbearbeitungsmaschinen.
Gehen Sie auf Nummer Sicher bei der Holzbearbeitung.
Ein kranker Mitarbeiter ist der teuerste Mitarbeiter. Um
diesen Umstand zu minimieren, haben wir in intensiver Entwicklungsarbeit und enger Kooperation mit der
Berufsgenossenschaft Holz Sicherheits-Einrichtungen
entwickelt, die in ihrer Art beispielhaft sind.Sie dienen nicht ausschließlich der
Unfall-Verhütung, sondern sie sind konzipiert um die Arbeitsleistung der Mitarbeiter zu erhöhen und so die Rationalisierung des Betriebes zu fördern.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
Alle unsere Kunststoffteile bestehen aus sortenreinem, recyclingfähigem Kunststoff mit Kennzeichnung.
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
02.05.025
Handles
Economical Production.
02.04.003.01
Parts from standard plastics
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our ef-
© 2014 Messe Düsseldorf GmbH
189
© 2014 Messe Düsseldorf GmbH
190
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
FUTURE PACK CO., LTD.
Address
No. 808, APEX Center, 18, Achasan-ro
133-834 Seoul
Korea, Republic
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
Phone
+82 2 4632101
02.05.047
Fax
+82 2 62807107
Internet address
www.futurepack.kr
E-Mail
info@futurepack.kr
Stand
Hall 11, A04-3 (Page 902)
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
Surface treated and decorated parts
Economical Production.
Be it high volume serial productions, a medium-size
volume of items or duplicability in short runs: None
of FRIED’s countless products would be on the market if it weren’t for their extremely economical manufacture.The latest in production methods, sophisticated
development approaches and years of know-how make
sure that even the most difficult product will prove itself
for the client - and make economic sense. With our efficient injection moulding machines FRIED produces precision parts of up to 35
kg injection weight.
Our close cooperation with machine manufacturers will always ensure a maximum of economic efficiency in our production runs.
With FRIED, the decision for manual or automatic finishing before the start of a
serial production is always also a question of detailed planning and economic
considerations.
Company News
06/18/2013
FUTURE PACK CO., LTD.
New developing M/C
Blank Offset printing machine can print paper cup
blank(3~32oz) upto 3 color.
It is high speed(150 pcs/Min) and good quality UV Ink
printing solution
Chip-removal machining of plastic parts in individual and in special production
is also possible without problems.
Product Overview
02.05.055
© 2014 Messe Düsseldorf GmbH
191
FUTURE PACK CO., LTD.
Suction cups
© 2014 Messe Düsseldorf GmbH
192
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.055
Printing & punching(die cut)machine inline
FUTURE PACK CO., LTD.
Paper cup printing & Punching(die cut blank) machine
can print and die cut paper cup blank inline automatically. It is high Flexo printer with water base ink upto 6
color both print single PE and double PE paper. We add
Doctor blade chamber system, Anylux ceramic roller,
Corona treatment and heater dry system so that printing quality is much better
Suction cups
AL Lid & IML punching machine
Aliminium Lid & In mold Label punching machine can
die cut label any kinds of AL Lid and IML. It is automatic
embossing roller and die cut machine.
Gallez
Blank Offset printing machine
Address
590-650 Boulvard Ouest, Parc des
62138 Douvrin
France
Phone
+33 3 21793500
Fax
+33 3 21793529
Ice cream cone sleeve machine
Internet address
www.gallez.fr
Ice cream cone sleeve forming machine can form Ice
cream cone sleeve cup. Water drinking corn cup
E-Mail
contact@gallez.fr
Stand
Hall 05, D04-9 (Page 874)
Blank Offset printing machine can print paper cup
blank(3~32oz) upto 3~6 color.
It is high speed(150 pcs/Min) and good quality UV Ink
printing solution
It is automatic and high speed production
Product Overview
Gallez
Paper cup machine
02.01.008
Paper cup forming machine can make all kinds of paper
cups automatically such as Hot coffee & Tea cup, Cold
drink cup, Ice cream cup, Noodle cup, Pop corn cup,
Chicken bucket and etc.
Product Details
02.01.008
© 2014 Messe Düsseldorf GmbH
Parts made by rotation moulding
193
Gallez
Parts made by rotation moulding
© 2014 Messe Düsseldorf GmbH
194
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
All kind of raw materials...
10/14/2013
All kind of raw materials is able to be injected in GALLEZ
facilities ( ABS – PS – ABS/PC – PC – PP – PP Mineral
or Glass Fibers – PA – PA Glass Fibers – PPA – POM
, … ) From few grams to more than 1 Kg, in 1K or 2K,
we are specialized both in technical and in appearance parts. We could also
propose you painting, chroming or decorated parts. Don’t hesitate to contact
our sales department by mail ( contact@gallez.fr ) for analyze and study your
project.
Thanks to its long experience in the PMMA extrusion,
Gammacril presents for the first time at the K2013
a real brand novelty: Flexible Acrylic Tubes named
Esaflex®.
NEW - Flexible Acrylic Tubes ESAFLEX®
Highest transparency and weather resistance among
the soft material, high formability, good heat resistance
are the most important properties.
Produced from soft PMMA resins, Esaflex® tubes can be supplied with a diameter range starting from 10 mm. up to 60 mm. in different thicknesses.
Gammacril s.r.l.
Product Overview
Address
Via Ticino, 76
20014 Nerviano / MI
Italy
Gammacril s.r.l.
01.01.003
Acrylic glass (s. PMMA)
01.01.066
Polycarbonate (PC)
01.01.088
Polymethylmethacrylate (PMMA) and copolymers (s.
acrylic glass)
Phone
+39 0331 415425
Fax
+39 0331 586751
Internet address
www.gammacril.com
01.01.122
Styrene/acrylonitrile copolymers (SAN)
E-Mail
info@gammacril.com
01.01.126
M-ABS
Stand
Hall 06, E57 (Page 878)
02.01.002
Products made by extrusion
02.01.006
Parts made by mechanical treating
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.08
Semi finished products of polystyrene (PS)
Company News
10/17/2013
Gammacril s.r.l.
GAMMACRIL welcomes you!
Gammacril would like to welcome all the visitors by its
booth in hall 6 showing its complete range of products.
© 2014 Messe Düsseldorf GmbH
195
© 2014 Messe Düsseldorf GmbH
196
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.04.001.04
Gammacril s.r.l.
Semi finished products of polycarbonate (PC)
I tubi estrusi in policarbonato Esalux® sono prodotti in colore trasparente solo
ed esclusivamente con materiale stabilizzato ai raggi UV.
Polycarbonate Tubes Esalux®
Polycarbonate is one of the last thermoplastic material
to be produced and marketed, but even so it has had a
spectacular consumption growth in different fields, from
the building to the electronic/ele-ctric industry and lately
in the car manufacture. This is one of the reason why
Gammacril has decided to apply the long experience
in acrylic into the production of Esalux® polycarbonate tubes, so that we can
enlarge our products range and offer to our customers transparent tubes with
superior performances, such as high impact resistance, excellent thermostability
and good transparency.
The standard production program includes diameters with range from 10 mm.
up to 250 mm., with standard lengths of 2.000 and 2.050 mm., all packed with
adhesive polyethylene film and they are undergone during the final stages of
the production to an antistatic treatment, through the application on the external
surface of a proper liquid, to avoid the presence of dust for a certain period after
the production.
The extruded polycarbonate tubes Esalux® are produced in transparent colour
only and exclusively with UV stabilized raw materials, to slow down the harmful
effects of the solar radiation.
We can supply on demand with minimum quantities and prices to agree with
our Sales Department, tubes in lengths from 10 mm. up to 13.000 mm., in diameters not present in our standard production program, in a wide range of
colours, and produced in materials with improved characteristics, such as better
fire resistance, perfect compatibility to the food contact (FDA approved material),
suitability for gamma radiation sterilazation for medical equipments.
Tubi in Policarbonato Esalux®
Gammacril ha deciso di apportare la sua lunga esperienza nell’acrilico, nella produzione di tubi in policarbonato Esalux®.Il programma di produzione standard
comprende diametri che spaziano dal 10 mm. al 250
mm., con lunghezze standard di 2.000 e 2.050 mm.,
sono tutti imballati con film in polietilene adesivo e sono
inoltre sottoposti durante le fasi finali della produzione ad un trattamento anti-
© 2014 Messe Düsseldorf GmbH
statico, mediante l’applicazione sulla superfice esterna di un apposito liquido,
per poter prevenire la presenza di polvere sui tubi stessi per un certo periodo
dopo la produzione.
197
Su richiesta con quantitativi minimi e prezzi da concordare con il nostro Ufficio
Commerciale, è possibile fornire tubi con lunghezze da 10 mm. a 13.000 mm.,
con diametri non presenti nel programma di produzione standard, in una vasta
gamma di colori sia trasparenti che colorati, e possono essere prodotti con materiali aventi caratteristiche incrementate, quali maggiore resistenza al fuoco o
al contatto alimentare (materiale approvato dalla FDA).
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
1 - Cast Acrylic Rods Gammacril®
Thanks to an experience of more than 50 years, Gammacril produces cast acrylic rods in one of the most
complete ranges of diameters and sizes actually present
on the market. Our standard production program is
based on two main groups of products:
- Cast Acrylic Round Rods Gammacril® with diameters from 2 mm. up to 200
mm.
- Cast Acrylic Square Rods Gammacril® with section from 6 mm. up to 200 mm.
They are supplied with transparent colour, with polished and brilliant surface,
and packed with adhesive polyethylene film, in standard lengths of 1.000 mm.
or 2.000 mm. All our standard rods are regularly present in stock , with very
short delivery times also for big quantities.
Besides, we can supply round and square rods different from the standard ones,
with minimum quantities and prices to be agree upon with our sales department, in a wide range of colours, diameters, sections, lengths and tolerances
not present in our standard production program. These items can also be produced not polished and only grinded.
Moreover the brand name Gammacril® also includes the following products,
called complementary, because they are not present in our standard range, but
they can be supplied in a very short delivery time.
Cast acrylic half-round rods Gammacril®
Cast acrylic hexagonal and octagonal rods Gammacril®
© 2014 Messe Düsseldorf GmbH
198
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
3 - Extruded Acrylic Tubes Esacril®
Cast acrylic rectangular rods Gammacril®
Cast acrylic triangular rods Gammacril®
Cast acrylic oval rods Gammacril®
Cast acrylic spheres Gammacril®
Cast acrylic cubes Gammacril®
Cast and extruded acrylic disks
Among the many supply possibilities that Gammacril can offer to its customers,
we can list the Cast Acrylic Blocks in transparent colour, with thicknesses that
range from 30 mm. up to 200 mm.
In consideration of their constant availability in our stock, for these products we
are able to carry out the cut-to-size service that could be combined also with
the edges polishing and on request, with minimum quantities, in a wide range of
colours.
2 - Cast Acrylic Tubes Esacast®
The cast acrylic tubes Esacast® are obtained by the
process of centrifugation of resin of methilmethacrylate
monomer in round moulds, and then by an accurate polishing of the external surface of each single tube.
The cast acrylic tubes Esacast® present high transparency, excellent superficial finish, good chemical and thermal stability, and
the possibility of producing in large diameters and high thicknesses and in a
wide range of colours without the need of big minimum quantities.
They are produced in diameters that range from 50 mm. up to 500 mm., with
standard length of 2.030 mm., while for the diameters starting from 300 mm. we
add also the standard lengths of 1.000 mm. but especially 3.030 mm.
On demand we can supply with cast acrylic tubes with external diameters and
thicknesses not listed in our standard production program.
The production program of the Esacril® tubes is one of the
most complete you can find today on the market, with sizes
that go from 7 mm. up to 300 mm., this last is one of the
biggest diameter available as extuded P.M.M.A. tube. Almost all the sizes of the Esacril® acrylic tubes listed in our
standard production program are available in our stock, in
the lengths 2.000 mm or 2.050 mm, while the delivery times
are extremely prompt for all that should not be delivered
directly from stock. The Esacril® tubes are supplied with transparent colour,
packed with adhesive polyethylene film in packing listed as follows, and they
are undergone during the final stages of the production to an antistatic treatment, through the application on the external surface of a proper liquid, to avoid
the presence of dust for a certain period after the production.
On demand with minimum quantities and prices to agree with our Sales Department, we can produce Esacril® tubes in lengths from 10 mm. up to 13.000
mm., in diameters not present in our standard production program, and in a wide
range of colours.
Our standard production program includes also Esacril® Opal extruded acrylic
tubes in translucent white colour with light transmission of 50%, and Esacril®
Satin extruded acrylic tubes, tubes with satinized (frosted) superficial finish such
as to create a diffused light effect with the presence of an internal lighting. Both
of them are particularly suitable for the lighting industry. Such tubes are regularly
present in our stock available in many sizes and in standard lengths, therefore
can be supplied without the need of minimum quantities.
Minimum quantities that are needed for the remaining tubes we can produce but
on demand and which are:
- Esacril® Shock-Resistant extruded acrylic tubes, i.e. in high-impact grade
acrylic.
- Esacril® SAN extruded tubes, material from the styrenic family, featured by a
good transparency, an excellent lightness and reasonable impact resistance.
- Esacril® MABS (Transparent ABS) extruded tubes, always from the styrenic
family but modified to the molecular level with methacrylate, in order to increase
the transparence compared with the ABS.
- Hollow profiles manufactured in different section types, such as square, rectangular, hexagonal, octagonal, elliptical, oval, with thicknesses from 1 mm. up
to 6 mm, either in transparent or in a wide range of colours.
© 2014 Messe Düsseldorf GmbH
199
© 2014 Messe Düsseldorf GmbH
200
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Barre acriliche colate Gammacril®
spessori da 30 a 200 mm. In considerazione della loro costante presenza nel
nostro magazzino, per tali prodotti siamo in grado di svolgere il servizio di taglio
a misura che può essere abbinato anche alla finitura rettificata e lucida dei bordi
e, su richiesta con quantitativi minimi, in una vasta gamma di colori.
Grazie ad un’esperienza di oltre 50 anni, Gammacril produce barre acriliche colate in una delle più vaste gamme di
diametri e sezioni presente oggi sul mercato.
Tubi Acrilici Colati Esacast®
Il nostro programma di produzione standard comprende
due principali linee di prodotti:
- Barre tonde acriliche colate Gammacril® con diametri da
2 mm. a 200 mm.
- Barre quadre acriliche colate Gammacril ® con sezione da 6 mm. a 200 mm.
Esse vengono fornite in colore trasparente, con superficie lucida e brillante e
protette con film di polietilene adesivo, in lunghezza standard da 1.000 mm. a
2.000 mm. Tutte le misure presenti nella produzione standard sono regolarmente presenti nel nostro magazzino, consentendo tempi minimi di consegna,
anche per richieste di grosse quantità.
Inoltre possiamo fornire su richiesta barre, sia tonde che quadre differenti dalla
produzione standard, con quantitativi minimi e prezzi da concordare con il nostro ufficio commerciale; in una vasta scelta di colori, sia trasparenti che coprenti;
in diametri, sezioni, lunghezze e tolleranze non presenti nel programma di produzione standard. Le barre possono essere prodotte con la finitura grezza (non
lucide e solo rettificate).
La famiglia di prodotti identificata con il marchio Gammacril® comprende inoltre i
seguenti prodotti, che noi definiamo complementari, nel senso che non figurano
nella nostra gamma standard, ma che è possibile fornire con tempi di consegna
molto brevi, anche se per una parte di essi vi è disponibilità costante nel nostro
magazzino:
Barre acriliche colate Gammacril® a Profilo Mezzo Tondo
Barre acriliche colate Gammacril® Esagonali ed Ottagonali
Barre acriliche colate Gammacril® Rettangolari
Barre acriliche colate Gammacril® Triangolari
Barre acriliche colate Gammacril® Ovali
Sfere acriliche colate Gammacril®
Cubi acrilici colati Gammacril®
Dischi acrilici colati ed estrusi
Tra le molteplici possibilità di fornitura che Gammacril® può offrire alla sua clientela, possiamo annoverare i Blocchi Acrilici Colati in colore trasparente, con
© 2014 Messe Düsseldorf GmbH
201
I tubi acrilici colati Esacast® sono ottenuti mediante il
processo di centrifugazione della resina di monomero di
metilmetacrilato in stampi rotondi, e successivamente
con un’accurata lucidatura della superficie esterna di
ogni singolo tubo.
I tubi acrilici colati Esacast® presentano un’elevata trasparenza, un’eccellente
finitura superficiale, un’ottima stabilità chimica e termica, ed infine la possibilità di
produrli in grossi diametri e spessori elevati ed in una vasta gamma di colori, sia
trasparenti che coprenti, senza che siano richieste delle grandi quantità minime.
I tubi sono prodotti in diametri che spaziano da 50 mm. a 500 mm., con
lunghezza standard di 2.030 mm., mentre per i diametri a partire dal 300 mm.
si aggiungono anche le lunghezze standard di 1.000 mm. ma soprattutto 3.030
mm.
Su richiesta inoltre possiamo fornire tubi acrilici colati in diametri esterni e spessori non presenti nel nostro programma di produzione standard.
Tubi Acrilici Estrusi Esacril®
Il programma di produzione Esacril® è quanto di più
completo si possa trovare oggi sul mercato, con misure che spaziano dal Ø di 7 mm al Ø di 300 mm,
quest’ultimo è uno tra i più grandi disponibile nel settore dei semilavorati acrilici estrusi sotto forma di tubo.
Quasi tutte le misure dei tubi acrilici Esacril® che troverete elencate nel programma di produzione standard sono disponibili presso
il nostro magazzino, nelle lunghezze 2.000 mm. o 2.050 mm., mentre i tempi di
consegna sono più che rapidi per tutto ciò che non può essere rifornito direttamente dal magazzino
I tubi Esacril® vengono forniti in colore trasparente, imballati in fogli di polietilene adesivo nelle confezioni specificate sul nostro sito e sono inoltre sottoposti
durante le fasi finali della produzione ad un trattamento antistatico, mediante
l’applicazione sulla superficie esterna di un apposito liquido, per poter prevenire
la presenza di polvere sui tubi stessi per un certo periodo dopo la produzione.
© 2014 Messe Düsseldorf GmbH
202
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Su richiesta con quantitativi minimi e prezzi da concordare con il nostro Ufficio
Commerciale, possiamo fornire tubi Esacril® con lunghezze da 10 mm. a 13.000
mm., con diametri non presenti nella gamma standard ed in una vasta gamma
di colori sia trasparenti che coprenti.
Il nostro programma di produzione standard comprende inoltre tubi acrilici estrusi Esacril® Opal di colore bianco translucente, con trasmissione di luce
pari al 50%, e tubi acrilici estrusi Esacril® Satin, tubi con finitura superficiale
satinata (frosted) tali da creare un effetto di luce diffusa con la presenza di
un’illuminazione interna. Entrambi sono particolarmente indicati per l’industria
illuminotecnica. Tali prodotti sono presenti regolarmente a magazzino in svariate dimensioni in lunghezze standard e possono pertanto essere forniti senza
alcun obbligo di quantità minima.Quantità che invece sono richieste per i restanti
tipi di tubi che sono prodotti su richiesta e che sono:
- Tubi acrilici estrusi Esacril® Shock-Resistant, cioè in acrilico con grado antiurto.
- Tubi estrusi Esacril® SAN, materiale della famiglia degli stirenici, dotato di una
buona trasparenza, di un’ottima leggerezza e di una discreta resistenza all’urto.
- Tubi estrusi Esacril® MABS (ABS trasparente), materiale anch’esso della
famiglia degli stirenici ma modificato a livello molecolare con del metacrilato,
in modo da poter incrementare la trasparenza rispetto all’ABS.
- Profili cavi con differenti tipi di sezioni, come ad esempio quadrati, rettangolari,
esagonali, ottagonali, ellittici, ovali, con spessori che possono variare da 1 mm.
a 6 mm., sia trasparenti che in una vasta gamma di colori.
GAUDLITZ GmbH
Address
Callenberger Str. 42
96450 Coburg
Germany
Phone
+49 9561 648-0
Fax
+49 9561 648-648
Internet address
www.gaudlitz.de
E-Mail
info@gaudlitz.de
Stand
Hall 05, A22 (Page 874)
Company News
08/28/2013
GAUDLITZ GmbH
The GAUDLITZ All-in-One Pen
We have extended our product range and developed
an In vitro diagnostic all-in-one platform technology
in pen format for conducting whole-blood-based rapid
tests with sample dilution.
The pen is characterized by an integrated sterile automatic lancet. The sample is precisely extracted by using an incorporated capillary tube and transferred to the buffer reservoir zone(s).
There, an optimal sample mixing with the desired buffer/solvent occurs and,
following this, the transfer to the actual test strip takes place.
The platform technology offers a high degree of flexibility with regard to the
buffer/solvent used, and can be adapted in accordance with customer requirements.
In this way, the user profits from a product that can be easily, speedily and precisely handled, thus reducing errors, without having to make further contributions
to the test.
© 2014 Messe Düsseldorf GmbH
203
© 2014 Messe Düsseldorf GmbH
204
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.05.023
Casings and cabinets
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.05.032
Laboratory equipment- technical parts
02.05.043
Parts for measuring instruments
02.05.072
Ventilator parts
02.05.073
Valves
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.080
Toothed wheels and racks
03.06.001
Injection and compression moulds
04.05
Subcontracting
GAUDLITZ GmbH
02.01.007
Parts made by compression moulding
02.01.010
Parts made by injection moulding
02.02.006
Embossing
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.016
Plastics products and parts for optics/precision
engineering
Product Details
02.03.002
02.04.003.01
Parts from standard plastics
02.05.001
Apparatus and parts
02.05.004
Fastenings
02.05.009
Data-processing equipement
02.05.019
Film cameras, cameras - technical parts
© 2014 Messe Düsseldorf GmbH
GAUDLITZ GmbH
Plastics products and parts for automotive
Automotive Products
- Automotive Injection Molded Parts In the automotive industry, injection molded parts are
essential elements and are to be found in many positions inside a car. Here, too, both the highest possible
degree of precision and high-quality material are necessary to ensure safety
and in order to minimise wear and tear. In the area of coupling disks, injection
molded parts are used as parts of an electronic clutch management system. As
this is an element which is placed under great mechanical strain, a great deal is
expected of the injection-molded parts with regard to interfaces or smoothness.
Injection-molded parts are also used in the area of plug and connector systems
for motor electronics with metal contacts. The exact positioning of the individual
contacts is one the most specific tasks in this context. GAUDLITZ also produces
injection- molded parts for gear units.
205
© 2014 Messe Düsseldorf GmbH
206
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Among other things, one of the major challenges lies in coping with the narrow
bearing tolerances. Pistons for clutches and brakes are a further application
area and in this case a great deal depends on the surface finish. In addition we
produce injection-molded parts for electric window regulator components and
adjustable headrests as well as for the gear housing in sunroofs or window wiper
motors. Here on our webpages you can find detailed information regarding the
possible application of injection-molded parts in the automotive field. Please do
not hesitate to contact us personally if you have any questions or wish to receive
advice from us. We will be happy to help you.
02.03.011
Plastics products and parts for mechanical engineering
Industry Products
GAUDLITZ produces many industrial porducts.
Here you will find some examples of our wide product
range.
- Precision Gears - Properties and Function Nowadays precision gears constitute an essential aspect of industrial production. Electric engines and gearboxes, which need a large number of precision
gears in order to function properly, are to be found in household products, cutting
tools, medical equipment and much more. The production of high-quality precision gears is thus an absolute necessity for the quality and sturdiness of many
technical products. We are a renowned company which has been active in the
field high-quality plastic part production for more than 70 years. Our precision
parts are now used in many industrial areas. You will find our precision gears in
automotive construction, in medical engineering as well as in many other precision engineering areas. However, alongside our production of precision gears,
GAUDLITZ Ltd manufactures other molded parts made from plastic and we are
able to design complex complete solutions for our customers. It is possible to
improve the durability and resilience of precision gears by means of our continuous further development of raw materials and new manufacturing techniques in
the field of precision gear production. Please take a moment to learn more about
the numerous possibilities and areas of application that our precision gears offer.
Read our certification or get in touch with us directly. We are always pleased to
be able to inform you about our precision gears and molded components.
© 2014 Messe Düsseldorf GmbH
207
02.03.012
Plastics products and parts for medical engineering
Medical Engineering
GAUDLITZ produces many parts for the field of medical engineering. Please click on the red dots to find out more about
our products.
- The Application of Injection Molded Parts in the Medical
Field The production of plastic parts is a very broad field. In
medicine in particular, precise and robust instruments are
needed which can, among other things, be complemented
by injection molded parts. Ceramic, plastic, silicon and also metal materials
are primarily used when producing injection molded parts. It is only with the
assistance of these basic materials that one can produce high-quality injection
molded parts. The challenges we set ourselves are those which, in the medical
engineering field, are faced by injection molded parts. We manufacture, for instance, components for ultrasonic heads of a particularly thin wall strength and
extremely smooth surface. Likewise, our injection molded parts are deployed for
single and multi channel pipettes. In this case a passage and dosage accuracy
is needed, sometimes with integrated threads. In the area of dialysis, plastic
parts are used as parts for valves. We also produce injection molded parts for
devices that measure blood pressure as well as x-ray machines and dental engineering machines, sample preparation devices for stool testing or laboratory
equipment for the purpose of analysing blood.
Our range of products extends beyond these to injection molded parts that are
made to meet individual requirements or must be developed to a specific design.
We also provide you with competent initial advice, keeping in mind the requirements the molded part must meet, as well as your field of application. Here
on our webpage you can find detailed information regarding our involvement in
the medical field. In case you have more detailed questions please avail of our
online form in order to make contact with us.
© 2014 Messe Düsseldorf GmbH
208
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.03.016
Plastics products and parts for optics/precision
engineering
GEHR GmbH
Address
Casterfeldstr. 172
68219 Mannheim
Germany
Phone
+49 621 8789-0
Fax
+49 621 8789-200
Internet address
www.gehr.de
E-Mail
info@gehr.de
Stand
Hall 08a, F21 (Page 894)
Product Overview
GEHR GmbH
02.01.002
Products made by extrusion
02.01.003.03
by pultrosion
02.01.004
Products made by calendaring
02.01.007
Parts made by compression moulding
02.03.001
Plastics products and parts for plant building
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
02.03.003
Plastics products and parts for building applications
02.04.001.03
Semi finished products of polyamide (PA)
02.03.004
Plastics products and parts for office equipment/
promotion
02.04.001.04
Semi finished products of polycarbonate (PC)
© 2014 Messe Düsseldorf GmbH
209
© 2014 Messe Düsseldorf GmbH
210
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.05
Semi finished products of polyethylene (PE)
Product Details
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.05
GEHR GmbH
Semi finished products of polyethylene (PE)
GEHR PE-HD®
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.08
Semi finished products of polystyrene (PS)
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Polyethylen ist aufgrund seiner guten chemischen Beständigkeit
unempfindlich gegen den Angriff der meisten Säuren,
Laugen, vielen organischen Lösungsmitteln und Warmwasser.
Er ist ein guter elektrischer Isolator und gut verschweißbar.
Die Dauergebrauchstemperatur liegt zwischen -50 °C
und ca. +90 °C.
Eigenschaften:
02.04.002
Films
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.025
Handles
02.05.068
Technical films
02.05.069
Parts of industrial laminates
niedrige Dichte hohe Zähigkeit (auch in der Kälte) hohe Reißdehnung sehr
gute elektrische und dielektrische Isoliereigenschaften sehr geringe Wasseraufnahme geringe Wasserdampfdurchlässigkeit hohe Chemikalienbeständigkeit
gute Spannungsrissbeständigkeit physiologische Unbedenklichkeit weiche Oberfläche (geringe Steifigkeit) nicht HF schweißbar naturfarben nicht witterungsbeständig
Anwendungsbeispiele:
Transportbehälter, Pumpen- und Ventilteile, Teile im Behälterbau, Bauteile bei
medizinischen Anwendungen, Dichtungen, Gleitprofile, Bauteile in der Lebensmittelindustrie.
02.04.001.06
02.05.075.01
GEHR PMMA® (Acryl)
Polymethylmethacrylat ist spröde und verfügt über eine hohe
Härte, Steifigkeit und Festigkeit. Zudem ist PMMA kratzfest
und polierfähig. Es besitzt eine gute Temperaturwechselfestigkeit und UV-Beständigkeit. Die Dauergebrauchstemperatur
von PMMA liegt zwischen 40 °C und ca. +70 °C.
Eigenschaften:
sehr hohe Härte und Steifigkeit hohe mechanische Festigkeit
polierfähige Oberfläche hohe Transparenz hohe Wärmeformbeständigkeit gute
elektrische und dielektrische Isoliereigenschaften gute Witterungsbeständigkeit
geringe Wasseraufnahme geringe Spannungsrissbeständigkeit geringe chemische Beständigkeit geringe Zähigkeit (spröde)
Fibreglass-reinforced plastic parts
© 2014 Messe Düsseldorf GmbH
Semi finished products of polymethylmethacrylate
(PMMA)
211
© 2014 Messe Düsseldorf GmbH
212
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Georg Utz GmbH
Anwendungsbeispiele:
Address
Nordring 67
48465 Schüttorf
Germany
GEHR PP®
Phone
+49 5923 805-0
Polypropylen besitzt eine gute Steifigkeit, Härte und Festigkeit, aber eine geringe Kerbschlagzähigkeit. PP neigt nicht
zur Spannungsrissbildung und ist gut verschweißbar. Bei
Minustemperaturen tritt jedoch eine Versprödung ein. Die
chemischen und elektrischen Eigenschaften sind sehr gut. Die
Dauergebrauchstemperatur liegt zwischen +5 °C und ca. +100
°C.
Fax
+49 5923 805-805
Internet address
www.utzgroup.com
E-Mail
info.de@utzgroup.com
Eigenschaften:
Stand
Hall 08b, A25 (Page 890)
niedrige Dichte hohe Wärmeformbeständigkeit hohe Steifigkeit, hohe Oberflächenhärte sehr gute Chemikalienbeständigkeit geringe Oxidationsbeständigkeit
geringe Abriebfestigkeitspröde in der Kälte nicht HF schweißbar naturfarben
nicht witterungsbeständig
Product Overview
Teile im Displaybau, Lebensmittelbereich, Lampenrohre, Handläufe.
02.04.001.07
Semi finished products of polypropylene (PP)
Anwendungsbeispiele:
Pumpen- und Ventilteile, Dichtungen, Träger in der Beschichtungsindustrie, Distanzhalter in der Galvanotechnik, Spielzeugteile.
© 2014 Messe Düsseldorf GmbH
213
Georg Utz GmbH
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
© 2014 Messe Düsseldorf GmbH
214
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
02.03.012
Plastics products and parts for medical engineering
Stapelbare Werkstückträger
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.003.01
Parts from standard plastics
02.04.003.03
Parts from high performance thermoplastics
Bananengebinde
02.05.006
Cointainers
Bananengebinde
02.05.033
Storage and transport containers
02.05.048
Pallets
Stapelbare Werkstückträger mit Kunststoff-Zapfen
zur Aufnahme von Zahnrädern unterschiedlichen
Durchmessers
02.03.014
Plastics products and parts for food processing industry
Aussenmasse (mm) 598 x 398 x 280
Product Details
Innenmasse unten (mm) 560 x 370 x 260
Nutzhöhe innen im Stapel (mm) 245
Stapelhöhe (mm) 265
Georg Utz GmbH
Volumen (l) 50
Gewicht (kg) 2,99
02.03.005
Plastics products and parts for household/consumer
Boden: Doppelboden geschlossen
Blumenbehälter
Griffe: 2 Grifflöcher
Blumenbehälter
02.03.015
Aussenmasse (mm) 1200 x 400 x 350
CD-Versandbox
Plastics products and parts for transport/packaging
Innenmasse oben (mm) 1150 x 350
Innenmasse unten (mm) 1085 x 300
CD-Versandbox
Nutzbare Innenhöhe (mm) 315
Aussenmasse (mm) 125 x 150 x 20
Volumen (l) 130
Innenmasse unten (mm) 125 x 142 x 10
Gewicht (kg) 4,2
Volumen (l) 0,2
Seitenwände: Längsseite geschlitzt, Kurzseite geschlossen
Gewicht (kg) 0,1
Ausführung: inkl. 2 Stapelbügel und 1 Etikettentasche
© 2014 Messe Düsseldorf GmbH
215
© 2014 Messe Düsseldorf GmbH
216
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Gevacril S.r.l.
03/06/2013
Address
Strada Vicinale Paolina, 1
20066 Melzo
Italy
GEVACRIL srl - 2012 was excellent and the group will
continue to grow
GEVACRIL® srl looks back again to a year of growth
and innovations: -Extension of the Cast Acrylic Tubes
range by several new diameters, (ex. OD 350/344 x
2100 mm; OD 610/580 x 2100 mm)
Phone
+39 02 95737351
Fax
+39 02 95737357
-Extension of the Cast Continued® tubes range by several new diameters, (ex.
OD 350/344 x 2100 mm; OD 350/340 x 2100 mm)
Internet address
www.gevacril.com
-Introduction of DecoNatural© Sheets by Plasting (Eco-resin panels with organic
inlays)
E-Mail
info@gevacril.com
-Introduction of DecoPietra© Sheets by Plasting (Eco-resin backlit panels with
stone effect)
Stand
Hall 05, E04 (Page 874)
-Introduction of AluPlasting© Sheets by Plasting (Aluminum + recycling resin
panels)
Company News
09/09/2013
Gevacril S.r.l.
GEVACRIL: Light Guiding Innovations
Continuing with this innovation policy GEVACRIL® srl strives to improve the service offering the most complete range of semi-finished pmma shapes, the highest quality and excellent product synergies while keeping the bottom line in sight.
09/24/2013
GEVACRIL® has been developing during the last years
trendy, image-oriented and modern semi-finished products for the design, furniture and lighting industry. This
are some examples of products which will be presented at the K-show 2013:
-Fluor-Acryl® Tubes, Rods and Bars (PMMA light guiding fluorescent shapes from OD5 to OD610) -DualDeco© Sheets by Plasting*
(double layer PMMA cast sheets) -DecoPietra© Sheets by Plasting (Eco-resin
backlit panels with stone effect) -DecoNatural© Sheets by Plasting (Eco-resin
panels with organic inlays)
GEVACRIL® srl will go on with this innovation phylosophy in order to offer a
unique range of standard and special semi-finished polymer shapes. Highest
quality and excellent product synergies will help you to be innovative and increase your market shares!
GEVACRIL®-Communications, all rights reserved
GEVACRIL: Light guiding innovations (2)
During the last years GEVACRIL® has been developing trendy, image-oriented & modern semi-finished
polymer products for the design, furniture and lighting
industry. This are some examples of products which
will be presented at the K-show 2013:
Fluor-Acryl® Tubes, Rods and Bars (PMMA light guiding fluorescent shapes
from OD5 to OD610mm) Extension of the Cast Continued® tubes range by several new diameters (ex. OD 350mm) Bondacryl® Adhesives by Plasting (UV, BiComponent, Solvent glues and auxiliaries for gluing PMMA, PC and other polymers) DecoNatural© Sheets by Plasting (Eco-resin panels with organic inlays)
AluPlasting© Sheets by Plasting (alu + eco-resin panels) DecoPietra© Sheets
by Plasting (Eco-resin backlit panels with stone effect) PS Sheets by Plasting
(Clear and Opal polystyrene sheets)
info@gevacril.com
GEVACRIL® srl strives to offer you new shapes and innovative semi-finished
polymers. The best quality-price ratio help you getting market shares.
*Plasting srl belongs to the GEVACRIL®-Group
GEVACRIL® Communications, all rights reserved
© 2014 Messe Düsseldorf GmbH
217
© 2014 Messe Düsseldorf GmbH
218
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.08
Semi finished products of polystyrene (PS)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
Gevacril S.r.l.
01.08.012
Solvent-based adhesives
01.08.015
One-pack adhesives
02.01.002
Products made by extrusion
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.04.001.06
02.03.003
Plastics products and parts for building applications
CAST & XT RODS, BARS, PROFILES
02.03.004
Plastics products and parts for office equipment/
promotion
A great range of rods, bars, half-round rods, triangle
bars and profiles (U; H; L); > 200 articles, from OD2mm
to OD200, also available in FLUOR-ACRYL® and a
wide range of transparent colours.
02.03.005
Plastics products and parts for household/consumer
02.03.008
Plastics products and parts for data appliance
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.016
Plastics products and parts for optics/precision
engineering
© 2014 Messe Düsseldorf GmbH
Product Details
Gevacril S.r.l.
Semi finished products of polymethylmethacrylate
(PMMA)
CAST & XT ACRYLIC TUBES
GEVACRIL® is a leading manufacturer of CAST & XT
ACRYLIC TUBES; from OD6mm to OD610mm; more
than 500 articles on range; also available in SATIN,
OPAL, METALLIC®, FLUOR-ACRYL® hues and a wide
range of colours. Simply the number one!
CAST CONTINUED® TUBES
The innovative CAST CONTINUED® ACRYLIC TUBE
features a very convincing property profile: it shows
almost the same quality features of CAST TUBES
and copes with very, very competitive prices; from
OD150mm to OD350mm; more than 40 articles that allow you savings up to 30%
219
© 2014 Messe Düsseldorf GmbH
220
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
DecoPietra SHEETS
Product Overview
DecoPietra© SHEETS: eco-resin backlit acrylic panels
with marble effect
DualDeco SHEETS
GFO Gesellschaft für Oberflächentechnik AG
02.02.001
Vapour-deposit decorating
02.05.007
Coatings
02.05.044
Metalised parts
02.05.047
Surface treated and decorated parts
04.05
Subcontracting
DualDeco© SHEETS: double-layer cast colored
02.04.001.08
Product Details
Semi finished products of polystyrene (PS)
GFO Gesellschaft für Oberflächentechnik AG
DecoNatural SHEETS
02.05.007
DecoNatural© SHEETS: eco-resin panels with organic
inlays
ELAMET® 250 bis 1000
ELAMET® 250 bis 1000 sorgt für die elektromagnetische Abschirmung von Kunststoffgehäusen im Sinne
der elektromagnetischen Verträglichkeit (EMV). Dünne
Schichten aus Aluminium garantieren dank ihrer hohen elektrischen Leitfähigkeit sehr gute Abschirmwerte.
ELAMET®-Schichten weisen optimale Haftungs- und Schichteigenschaften auf
fast allen Kunststoffen auf und erhalten die Elastizität und Schlagzähigkeit des
Kunststoffes.
GFO Gesellschaft für Oberflächentechnik AG
Address
Güglingstr. 74
73529 Schwäbisch Gmünd
Germany
Phone
+49 7171 9107-0
Fax
+49 7171 9107-999
Internet address
www.gfo-online.com
E-Mail
vertrieb@gfo-online.com
Coatings
Eine zusätzliche Schutzschicht bringt verbesserte Langzeitstabilität, diese Kombination bezeichnet man ELAMET® 250 P bis 1000 P. Die transparente Deckschicht
schützt die Aluminiumschichten vor Feuchtigkeit und gegen Fingerabdrücke.
ELAMET® Gold
Stand
ELAMET® Gold bieten wir als dekorative Beschichtung mit Feingold - 24 Karat
- an.
02.05.047
ELAMET® D
Mit ELAMET® D lassen sich hochwertige dekorativ-technische Aluminium-Beschichtungen
realisieren, beispielsweise die Verspiegelung von Reflektoren oder halbtrans-
Hall 05, A42 (Page 874)
© 2014 Messe Düsseldorf GmbH
Surface treated and decorated parts
221
© 2014 Messe Düsseldorf GmbH
222
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
parente Tag-Nacht-Verspiegelungen. Auch Konsum- und Gebrauchsgüter werden mit ELAMET® D nach Kundenwünschen veredelt.
1995 Achievement of ISO 9002
1996 The victory on ”Embossed PVC tape” patent rights lawsuit
1997 December 26th, 1997�Stock officially traded in OTC
GLOBE INDUSTRIES CORPORATION
Address
1999 Globe Industries Corporation’s 50th anniversary
7th F., No. 61, Sec. 3, Nan-King E. Rd.
104 Taipei
Taiwan
2000 August 18th 2000, Stock officially listed in the stock market
2002 Investment in Mainland China, acquisition of the land in Zhuhai
2003 ISO 9001 Replacement
Phone
+886 2 25066666
Fax
+886 2 25079988
Internet address
www.globetape.com.tw
E-Mail
patricia@globetape.com.tw
2005 Achievement of IMQ, IEC 60454-3-1
2006 Achievement of JIS
2007 ERP Implementation
2011 Achievement of Carbon Footprint Certification
Product Overview
Stand
Hall 07.1, C51-3 (Page 886)
Company News
07/02/2013
02.04.002
GLOBE INDUSTRIES CORPORATION
Films
Product Details
02.04.002
Histroy
GLOBE INDUSTRIES CORPORATION
GLOBE INDUSTRIES CORPORATION
Films
adhesive tapes, such as OPP packing tape and soft
PVC tape
1975 Approval of Canada Standard CSA
1976 Approval of USA standard UL
1984 Computerized management system promoting QCC, TQC
Globe has successfully developed its diversified product combination, which are widely applied to many different work fields. Our products have achieved several
standards, to name a few such as Chinese standard of
CNS, American UL, and Canadian CSA etc.
1985 UL Approval of Electronic Devices
We are specialized in OPP Packing tape and soft PVC tape.
1986 The acquisition of the head-office building in Taipei
Packing Tape: Globe’s Packaging Tapes are specifically designed and developed to meet various kinds of packaging purposes. The PVC Embossed Packaging Tapes are easily torn to leave a flat edge without the need to apply knives
or cutters; they provide firm sealing and achieve high efficiency. Transparent
OPP Packaging Tapes keep the printings and patterns on the carton visible,
while OPP Packaging Tapes of tan color can match the carton color harmoniz-
1980 Approval of USA ”A” grade for PE Film Tape
1981 Successful development of Crepe Tape
1983 Increase of production of Special Adhesive Tapes for Electronic Industries
1987 Another land acquisition within Youth Industrial Park and the set up of the
Youth Plant II
1990 Public Offering) authorized by SEC (Securities and Exchange Commission)
© 2014 Messe Düsseldorf GmbH
223
© 2014 Messe Düsseldorf GmbH
224
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ing the visual effects. These products have fine adhesive characters, which can
avoid cartons turn open after sealing. Printings of trademarks or advertisements
on the tape are also available upon customer’s requests. Globe’s Packaging
Tapes are suitable for all kinds of packaging purposes like carton sealing, binding, and packaging that requires extra high tensile strength.
Protecting Tape: Globe’s Protecting Tapes are specially designed and developed for different needs in different work fields. They provide protection during
goods transportation, storage, piling, and processing. They also protect against
surface damage, suitable for aluminum and plastic steel frame, aluminum board,
stainless steel plate, synthetic plywood plate, and speaker housing board. Moreover, they are good for pipe maintenance and mending. Customer’s trademark
is printable, and the tapes are easy in handling. The products are resistant to
sunlight exposures and different weather conditions. In addition, the protecting
tapes are dust proof and free of adhesive residue. There are low, medium and
high adhesion grades for users to choose according to their applications.
Electrical Insulating Tape: Globe PVC Electrical Insulating Tapes adopt various
kinds of PVC films and adhesives to meet different customers’ need. They are
suitable for wire harness, degaussing coils spooling, insulation protection, etc.
Our PVC tapes, which are characterized to be resistant to flame, bad weather
conditions, and high voltage, fulfill adequately the performance of electrical insulation. In addition to CNS (Chinese standard), these series of premium quality
products also receive approvals from American UL, RU, Canadian CSA, Italy
IMQ, German VDE, European Standard EN60454, and Japan JIS. Globe’s PVC
Electrical Insulating Tapes are well known for their fine qualities, and this is one
of the product lines that the company allocates the most resources in R&D.
Duct Tape: Globe’s Duct Tapes are suitable for wrapping industrial pipes, ground
and under ground pipes. They are resistant to moisture, corrosion, pH alterations, and different weather conditions. They provide excellent protection quality. Colors of the products can be flexibly adjusted based on customer’s demands.
Masking Tape: Globe’s Masking Tape is suitable for surface masking protection
for spraying paint, baked-finish of car, plastic and metal parts. They are also
suitable for surface protection for printed circuit board (PCB), high temperature
soldering, and surface protection of components during puncturing and assembling works. This series is designed to be resistant to high temperature, solvent,
acids and alkalis. The masking tapes are easily stripped off without leaving adhesive residue and thus keep the surface intact. They fulfill masking effects and
promote the finishing quality of the applied products, which is the best choice
among customers.
If you need further information, please feel free to visit our webiste at www.globetape.com.tw
© 2014 Messe Düsseldorf GmbH
225
for more information.
Good View Industrial Company Limited
Address
Unit 1504, 15F, Nanyang Plaza, 57 Hung
Kowloon, Hong Kong
China, Hongkong, Special Administrative Region
Phone
+852 27274484
Fax
+852 27727094
Internet address
www.goodview.com.cn
E-Mail
rajan@goodview.com.cn
Stand
Hall 02, B09 (Page 866)
Product Overview
Good View Industrial Company Limited
02.01.010
Parts made by injection moulding
02.02.003
Printing
02.03.002
Plastics products and parts for automotive
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.04.003.02
Parts from engineering plastics
© 2014 Messe Düsseldorf GmbH
226
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.014
Electrical equipements-parts
02.05.017
Telecommunication equipment - parts
02.05.020
Filters and parts
02.05.024
Glass-fibre reinforced plastic parts (GRP)
03.06.001
Injection and compression moulds
02.02.003
Printing
Post processing of Plastic parts
We have Automatic Spray painting lines and Printing lines
for product finishing.
Spray painting, printing and related processes
Product Details
02.01.010
Good View Industrial Company Limited
We have Automatic Spray painting lines and Printing
lines for product finishing.
Parts made by injection moulding
Injection Molding
Highlights of our Injection molding section.
■ 181 molding machines ranging from 30T-800T clamping force.
02.03.002
■ Multifaceted molding capabilities.
Automobile Parts
– Precision Injection Molding of cosmetic as well as technical parts.
We Export Injection Molds and Plastic parts to Various
Automotive customers in Europe and Japan.
– Insert Molding with metal and fabric encapsulation on vertical molding machines.
– Over Molding. Multi stage molding process for parts with 2 or more different
materials and(or) colors.
– Co-Injection (2K) Molding with 2 different materials injected simultaneously.
■ 1000 tones of plastic material consumed every month.
Plastics products and parts for automotive
02.03.004
Plastics products and parts for office equipment/ promotion
Printer and Copier parts
We make parts for Printers, Copiers, Cheque Writers
and Franking machines for European customers.
■ In-house color compounding facility.
■ More than 3000 active molds in production.
© 2014 Messe Düsseldorf GmbH
227
© 2014 Messe Düsseldorf GmbH
228
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.005
Plastics products and parts for household/consumer
Parts and Sub-Assemblies for Home Appliances
02.05.020
Filters and parts
Filters for Vaccum cleaners and Irrigation equipment
We make parts and sub-assemblies for Washing machines, Refrigerators and Vaccum cleaners.
Fabric encapsulated Filters for Vacuum cleaners.
Filters for Irrigation equipment.
Oil Filters for Gasoline tank for gardening tools.
02.03.006
Plastics products and parts for electro-/household appliance
3 Material Power Tool Housing
02.05.024
Glass-fibre reinforced plastic parts (GRP)
Glass fibre and mineral fibre reinforced parts
Housings, Handles, Gear Case, Fan, Batteries and
Chargers for Power Tools
Parts made from:
Nylon 6 + Glass Fibre
Over molds.
Nylon 66 + Glass Fibre
Insert Molds.
PolyCarbonate + Glass fibre
2K molds.
PC+GF+CF+PTFE
02.04.003.02
Parts from engineering plastics
Glass fibre reinforced plastic parts
Technical parts
Well experienced in molding engineering plastics
Parts made from:
Nylon 6 + Glass Fibre
02.05.014
Nylon 66 + Glass Fibre
Electrical equipements-parts
Parts for Energy Transmission devices
PolyCarbonate + Glass fibre
Various parts for Electrical Equipment
PC+GF+CF+PTFE
02.05.017
Telecommunication equipment - parts
Telephone parts
Parts for Telephones and Mobile phones
© 2014 Messe Düsseldorf GmbH
229
© 2014 Messe Düsseldorf GmbH
230
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
03.05.001
Hot-plate welding machines
03.06.001
Injection and compression moulds
03.06.006
Other moulds
Greidenweis Maschinenbau OHG
Address
Friedrich-List-Str. 9
78549 Spaichingen
Germany
Phone
+49 7424 9576-0
Fax
+49 7424 9576-34
Product Details
02.03.002
Greidenweis Maschinenbau OHG
Plastics products and parts for automotive
Fertigungsanlagen für Innenraumteile
Internet address
www.greidenweis.de
E-Mail
m.greidenweis@greidenweis.de
Stand
Hall 04, A21 (Page 870)
Product Overview
Kaschieranlagen Umbuganlagen Beflämmen Klebstoffauftragsanlagen Stanzvorrichtungen AntiknarzlackAuftragsanlagen Montagevorrichtungen Roboterapplikationen
Greidenweis Maschinenbau OHG
02.01.005
Parts made by laminating
02.01.007
Parts made by compression moulding
02.01.009
Parts made by foaming
02.01.011
Grupa Azoty S.A.
Address
ul. Kwiatkowskiego 8
33-101 Tarnów
Poland
Parts made by termoforming
Phone
+48 14 6373737
02.03.002
Plastics products and parts for automotive
Fax
+48 14 6373333
03.02.004.04
Other presses
Internet address
www.grupaazoty.com
03.04.004
Laminating plant
E-Mail
azoty@grupaazoty.com
Stand
Hall 07a, D02 (Page 880)
© 2014 Messe Düsseldorf GmbH
231
© 2014 Messe Düsseldorf GmbH
232
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
Grupa Azoty S.A.
01.01.010.05
Polyamide
02.05.058
Hoses
01.01.010.11
Compounds
04.06
Science and consulting
01.01.021
Dry blend
01.01.032
Granulates
01.01.043
Polyamides blends
01.01.049
Polyamide PA 06
Product Details
02.04.001.03
Grupa Azoty S.A.
Semi finished products of polyamide (PA)
Plastics products
Polyamide 11 and 12 tubes
Product description
Tubes from plasticized and non-plasticized (hard grades) of polyamide 11 and
12 are monolayer tubes (hoses) manufactured through extrusion and vacuum
calibration.
01.01.089
Polyoxymethylne (POM) (s. acetal copolymers)
01.10.072
Solvents
They are produced in black and natural colours, as well as available in primary
colours
01.10.090
Phthalate plasticisers
Polyamide 6 tubes
01.10.126
Plasticiser
Polyamide 6 (PA 6) tubes are monolayer tubes produced by extrusion and vacuum calibration.
01.13.012
Caprolactam
01.13.020
E-Aminocaprolactam
Polyamide 6 tubes are available in natural milk-white semitransparent colour and
coloured in all primary colours. It is also possible to supply tubes with improved
sliding properties with the addition of molybdenum disulfide or graphite.
01.13.024
Formaldehyde
01.13.033
Phthalates
01.13.040
Raw materials
02.04.001.03
Semi finished products of polyamide (PA)
Product description
Polyamide casings, food grade
Product description
FOOD GRADE polyamide casings are produced from polyamide 6. They are
monolayer not oriented (not thermo shrinkable).
Food grade polyamide casings are available in the following colours: colourless,
white, yellow, red, orange, beige, silver, gold, green, blue, brown, black, smoky
(light brown and others), transparent, coloured. It is possible to produce casings
in a colour agreed upon between the producer and the consumer. The casings
can be filled manually or automatically.
Polyethylene tubes
© 2014 Messe Düsseldorf GmbH
233
© 2014 Messe Düsseldorf GmbH
234
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product description
Company News
Low density polyethylene (LDPE) tubes are monolayer tubes manufactured using extrusion and vacuum calibration methods. They are characterized by low
specific weight, high flexibility and elasticity, also at low temperatures.
10/09/2013
Polyethylene tubes are produced in semitransparent natural colour and available
in primary colours.
Both colourless and coloured polyethylene tubes contain a UV light absorber
resulting in increased resistance to light exposure (as denoted by the code L
following the colour code).
Guangdong Decro Package Films Co.,Ltd.
Guangdong Decro Package Films Co.,Ltd.
DECRO FILM, ECO FILM
With many years spent focusing on Greener solution
for package, DECRO very proudly present you DECRO Light Family Members, providing you the real
Lighter and Greener packaging options, helping you
achieve considerable saving through 8 means, from
direct down-gauge, low density, energy saving, less
CO2 emission, less logistics and stock space, the
green footprint goes further to Oxo-biodegradable, longer
shelf-life for packed food and easy recycle process!
Address
Gongye Road, Shunfeng Ind. District,
528333 Foshan, Guangdong
China, People’s Republic of
The DECRO Light Family Members cover all kinds of packing and label application, from lamination, pouch making, bag making, WRL, PSL, and shrink sleeve.
They are of BOPP, BOPE, PO film that combining cross-functional of different
packing materials in one, thus optimize the whole process link to a greener view,
as well as easier and quicker handling feature.
Phone
+86 757 22323256
They are :
Fax
+86 757 22810030
Internet address
www.bopp.com.cn
E-Mail
cat@bopp.com.cn
Stand
Hall 07.2, F09 (Page 888)
DECROlam—Co-extruded Thermal film DECROpack—Co-extruded Oriented
Down-gauge PE film DECROshrink—Co-extruded TD Shrink Polyolefin film
DECROwhite— Cavitated Embossable PP film DECROfresh— Anti-fog (antibacterial) PP film
Product Overview
© 2014 Messe Düsseldorf GmbH
235
Guangdong Decro Package Films Co.,Ltd.
02.03.014
Plastics products and parts for food processing
industry
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
© 2014 Messe Düsseldorf GmbH
236
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.03.014
Guangdong Decro Package Films Co.,Ltd.
Plastics products and parts for food processing industry
DECROlam – Co-extruded Oriented Thermal PP Film
DECROlam – Co-extruded Thermal film obtains unique
co-extruded “Functional Layer” which is integrated into the film during the biaxially oriented manufacturing process, and allows it adhere to almost any surface
by appropriate pressure and temperature.
It helps to eliminate on-line or off-line glue coating process from traditional gluebased lamination, thus saving millions of tons of CO2 emission during the gluecoating and glue-drying process.
Major Benefits of DECROlam:
Easy Handling & Storage Saving Benefit: Remove the need of liquid glue processing, save tremendous curing time and cleanup labor. Eliminate flammable
stock and harmful fumes from VOC. Provide extensive reduction of stock requirement and laminator area occupancy.
Energy conservation & Environmental friendly: No need for oven drying procedure, saving 50% or more electric power, saving millions of tons of CO2 emission; Free of VOC residue, conform to international environmental protection
standard and Clean Production Standard
Strong instant bonding: Achieve high peeling strength right after lamination, saving hours of aging time, judgment of bonding strength can be done right on site�
Improvement on yellowish appearance: With no glue remains between paper
and film, no chance for glue-aging or called as yellowish influence laminated
material appearance after long-term storage.
Second of all, despite the reduction in thickness, higher impact and puncture
resistance is improved, particularly in freezer applications. This makes the film
ideal for frozen foods where packaging products with sharp corners is often a
problem.
Thirdly, the film offers high hot tack plus a stronger seal, which enables fast
sealing at lower temperature, suits high speed VFFS/HFFS applications that
improves productivity.
A fourth benefit is BOPE’s extra flatness, as it allows more consistency through
the printing process, giving better registration and press speed.
Finally, Outstanding optical property improvement than blown PE, together with
long lasting and stable surface tension of this film, making it a very flexible printing material. Reverse printed BOPE film can replace BOPP or even PET laminates. Also, it can be laminated to blown PE, giving a 100 per cent recyclable
laminate.
TYPICAL APPLICATIONS OF BOPE
25-40 micron gauges of BOPE can be used to replace what would be the current
job of 40-80 micron PE. The material, with its attendant costs and waste saving,
laminates to all other films to facilitate VFFS and HFFS structures such as bags
and pouches. Its unique tear structure even allows re-sealable packs to be created. Frozen foods, chilled foods, meat, fish, dry goods, pouches, liquids are
all suitable for packaging in BOPE using the appropriate structure. The applications are as extensive as current PE films and more. The cost savings, weight,
waste savings, along with attendant environmental advantages make this new
film one of the most exciting developments for some years in this sector. After
its success in the Chinese market it is being introduced in Europe.
There are also some other developments which are enabling film suppliers to
assist retailers in meeting their Courtauld commitment.
Recycle favorable: Laminated product of simpler material structure for readily
separation of paper and plastic achieves handy recycle procedure.
Quoted from PACKAGING GAZETTE
DECROpack – Co-extuded Oriented Down-gauge
PE film
DECROshrink – Co-extruded TD Shrink Polyolefin
film
DECROpack – Is a type of Co-Ex BOPE film offers a number of benefits. First of
all, thickness is massively decreased. A maximum reduction of up to 50% can be
achieved with all the attendant savings in weight of packaging, waste generated,
and material transported, energy required for processing plus reduced carbon
emissions with all the attendant environmental benefits this implies.
DECROshrink - is a TD shrink sleeve polyolefin film which allows easier separation in the PET recycle process, due to its low density allows thorough waterseparation that the label floats and is easily skimmed off from PET bottle.
© 2014 Messe Düsseldorf GmbH
237
PACKAGINGGAZETTE.CO.UK
LOW DENSITY
At the same time, the low density gives DS over 38% higher yielding over PVC,
© 2014 Messe Düsseldorf GmbH
238
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
PET and OPS, achieves direct saving in package material that wasted at the
end.
STORAGE CONDICTION
DECROshrink is much stable and less sensitive to temperature, requires only
ordinary temperature for storage, saving storage energy.
SHRINKAGE RATIO
DECROshrink offers 60% TD shrinkage that covers most shrink sleeve application reqwuirement.
02.04.001.05
There are also some other developments which are enabling film suppliers to
assist retailers in meeting their Courtauld commitment.
Quoted from PACKAGING GAZETTE
PACKAGINGGAZETTE.CO.UK
Semi finished products of polyethylene (PE)
02.04.001.07
DECROpack – Co-extuded Oriented Down-gauge
PE film
Semi finished products of polypropylene (PP)
DECROlam – Co-extruded Oriented Thermal PP Film
DECROpack – Is a type of Co-Ex BOPE film offers a number of benefits. First of
all, thickness is massively decreased. A maximum reduction of up to 50% can be
achieved with all the attendant savings in weight of packaging, waste generated,
and material transported, energy required for processing plus reduced carbon
emissions with all the attendant environmental benefits this implies.
Second of all, despite the reduction in thickness, higher impact and puncture
resistance is improved, particularly in freezer applications. This makes the film
ideal for frozen foods where packaging products with sharp corners is often a
problem.
Thirdly, the film offers high hot tack plus a stronger seal, which enables fast
sealing at lower temperature, suits high speed VFFS/HFFS applications that
improves productivity.
A fourth benefit is BOPE’s extra flatness, as it allows more consistency through
the printing process, giving better registration and press speed.
Finally, Outstanding optical property improvement than blown PE, together with
long lasting and stable surface tension of this film, making it a very flexible printing material. Reverse printed BOPE film can replace BOPP or even PET laminates. Also, it can be laminated to blown PE, giving a 100 per cent recyclable
laminate.
TYPICAL APPLICATIONS OF BOPE
25-40 micron gauges of BOPE can be used to replace what would be the current
job of 40-80 micron PE. The material, with its attendant costs and waste saving,
laminates to all other films to facilitate VFFS and HFFS structures such as bags
and pouches. Its unique tear structure even allows re-sealable packs to be cre-
© 2014 Messe Düsseldorf GmbH
ated. Frozen foods, chilled foods, meat, fish, dry goods, pouches, liquids are
all suitable for packaging in BOPE using the appropriate structure. The applications are as extensive as current PE films and more. The cost savings, weight,
waste savings, along with attendant environmental advantages make this new
film one of the most exciting developments for some years in this sector. After
its success in the Chinese market it is being introduced in Europe.
239
DECROlam – Co-extruded Thermal film obtains unique
co-extruded “Functional Layer” which is integrated into the film during the biaxially oriented manufacturing process, and allows it adhere to almost any surface
by appropriate pressure and temperature.
It helps to eliminate on-line or off-line glue coating process from traditional gluebased lamination, thus saving millions of tons of CO2 emission during the gluecoating and glue-drying process.
Major Benefits of DECROlam:
Easy Handling & Storage Saving Benefit: Remove the need of liquid glue processing, save tremendous curing time and cleanup labor. Eliminate flammable
stock and harmful fumes from VOC. Provide extensive reduction of stock requirement and laminator area occupancy.
Energy conservation & Environmental friendly: No need for oven drying procedure, saving 50% or more electric power, saving millions of tons of CO2 emission; Free of VOC residue, conform to international environmental protection
standard and Clean Production Standard
Strong instant bonding: Achieve high peeling strength right after lamination, saving hours of aging time, judgment of bonding strength can be done right on site�
Improvement on yellowish appearance: With no glue remains between paper
and film, no chance for glue-aging or called as yellowish influence laminated
material appearance after long-term storage.
Recycle favorable: Laminated product of simpler material structure for readily
separation of paper and plastic achieves handy recycle procedure.
© 2014 Messe Düsseldorf GmbH
240
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Hans-Jürgen Keil Anlagenbau GmbH & Co. KG
02.05.067
Address
Zum Welplager Moor 8
49163 Hunteburg
Germany
Phone
+49 5475 9200-0
Fax
+49 5475 9200-190
Internet address
www.keil-anlagenbau.de
E-Mail
mail@keil-anlagenbau.de
Stand
Hall 07a, B35-7 (Page 880)
Product Overview
Apparatus and parts
02.05.006
Cointainers
02.05.067
Tanks
03.01.001.05
Other mixers
03.01.009
Recycling lines
03.02.005.03
Other machinery for foam
03.07.002.05.01
Volumetric dosing and metering equipment
© 2014 Messe Düsseldorf GmbH
Tanks
Storage tank farms
Hans-Jürgen Keil Anlagenbau GmbH & Co. KG
02.05.001
Hans-Jürgen Keil Anlagenbau GmbH & Co. KG
We construct storage tank farms for all kinds of solid,
liquid and gaseous substances of industrial purpose.
Especially, we focus on assembling storage tank farmsfor all kinds of polyurethane systems.As a specialist,
our manufacturing facilities are subject to the corresponding monitoring contracts by the German TUEV,
and thus under a constant and independent control by its authorized experts.
The range of our supply covers the entire range from the standard equipment
to individually designed facilities. Not only do we supply an optimally designed
equipment such as mixing, pumping and circulating facilities, tempering devices
as well as a professional collection of instrumentation and control systems, but
we also check all the components of an installation for occupational safety, lifetime as well as energy consumption. We also guarantee a high quality standard
having our view on the economic aspect of the operating costs of an equipment.
We plan and manufacture our storage tank farms according to the German Water
Resources Law (WHG), the Ordinance on Installations for Handling of WaterPolluting Substances and on Specialist Companies in Germany (VAwS), and the
Technical Directives on Combustible Liquids & Pressure Equipment Directive in
Germany (TRbF).
We construct above-ground and underground storage tank farms for all kinds
of hazardous substances. In addition to the general system components of
polyurethane production such as the Polyols, Isocyanates, and Pentane, we
also operate on other parts of chemical industry, including dissolvents, adhesives, resins, acids, and bases.
Storage and supply of solids are also included in our scope of installations. Depending on the particular product requirements, our storage tank farms are made
of different top-quality materials. Steel and stainless steel are used along with
synthetic material. Also glass fiber reinforced plastics (GFK) with or without interior lining is a proven material for the construction of storage tank farms.
241
© 2014 Messe Düsseldorf GmbH
242
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
HARDO-Maschinenbau GmbH
02.05.007
Address
Grüner Sand 78
32107 Bad Salzuflen
Germany
Phone
+49 5222 93015
Fax
+49 5222 93016
Internet address
www.hardo.eu
E-Mail
h.immig@hardo.eu
Stand
Hall 04, C62 (Page 870)
Product Overview
HARDO-Maschinenbau GmbH
Coatings
Vorbeschichten/Wickeln
Für die Vorbeschichtung von Kantenstreifen hat sich
unser „Klassiker“ seit über 30 Jahren einen Namen
gemacht. Ständig verbessert stellen unsere Vorbeschichtungsanlagen für Kantenstreifen nach wie vor die Referenz dar. Die Anlagen können für die gleichzeitige Beschichtung von 2, 4,
oder 6 Kantenstreifen mit Schmelzklebstoff, PUR-Schmelzklebstoff oder Dispersion geliefert werden. Es können Kantenstreifen aus Melamin, Papier, Furnier
oder Kunststoff beschichtet werden. Auch für andere Materialien wie Klettbänder können die Anlagen genutzt werden. Für die Beschichtung von Mutterrollen
liefern wir Anlagen bis zu einer Breite von 650 mm. Zum Umwickeln von Kantenmaterial in kleinere Rollen, und Aufwickeln von Dickkanten bieten wir spezielle
Wickler an.
HARDO-Maschinenbau GmbH
02.01.005
Parts made by laminating
02.05.007
Coatings
02.05.031
Hot melt films
03.03.005
HAVER & BOECKER Drahtweberei und
Maschinenfabrik
Address
Carl-Haver-Platz 3
59302 Oelde
Germany
Winding equipment
Phone
+49 2522 30-0
03.04.004
Laminating plant
Fax
+49 2522 30-403
03.04.005
Coating plant
Internet address
www.haverboecker.com
03.04.008
Equipment for In-Mould Decoration (IMD)
E-Mail
haver@haverboecker.com
03.08.001
Surface pretreatment equipment
Stand
Hall 12, A32 (Page 906)
© 2014 Messe Düsseldorf GmbH
243
© 2014 Messe Düsseldorf GmbH
244
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
HAVER & BOECKER Drahtweberei und Maschinenfabrik
02.05.020
Filters and parts
03.01.004
Screening machines, classifiers, dedusting systems
for plastic pellets
03.01.006
Screen changers
03.01.007
Melt filters
03.01.008
Compounding lines
03.07.002.02
Silo discharge devices
Product Details
02.05.020
Hekuma GmbH
Address
Freisinger Str. 3b
85386 Eching
Germany
Phone
+49 8165 633-0
Fax
+49 8165 633-111
Internet address
www.hekuma.com
E-Mail
sales@hekuma.com
Stand
Hall 10, D40 (Page 900)
HAVER & BOECKER Drahtweberei und Maschinenfabrik
Company News
Filters and parts
08/14/2013
Drahtgewebe und Filterelemente
Für die Kunststoffschmelze-Filtration Das HAVER &
BOECKER-Fertigungsprogramm umfasst Tausende verschiedener Drahtgewebesorten, von denen mehr als
3.600 lagermäßig geführt werden. Drahtgewebe liefern
wir als Rollen, Stücke, Streifen sowie in konfektionierter
Ausführung als Ronden, Formteile, Filterelemente und
Drahtsiebböden. Große Serien und Einzelanfertigung, wir liefern was Sie
benötigen. * Infomaterial * Ansprechpartner
© 2014 Messe Düsseldorf GmbH
245
Hekuma GmbH
Twice as fast
Higher speed in a smaller area – HEKUMA sets new filter separation standards
in the production of pipette tips.
The development of HEKUMA’s new filter separation system, which was registered as a patent in spring 2013, has caused no small amazement. The separation was designed for pipette tips in the first place, but can also be used for applications in which small, lightweight cylinders need to be made available for the
next assembly step as quickly and reliably as possible. With cycle times of 1.5
seconds between bulk-fed filters entering the feeder system and the filling of the
turntable plate, the manufacturer of high-performance automation for injection
molding systems has thus managed to considerably accelerate the separation
process of pipette tip filters. This time saving is reflected in higher speeds over
the entire assembly process. HEKUMA has now reduced this process to just 5
seconds per cycle (filter entry, assembly into the pipette tip). Testing was carried
out in the HEKUMA facility in Eching on the basis of a 16-hole grid. Depending
on the performance of the system and the scope of the manufacturing concept,
the grid size can be scaled upwards so as to serve the parallel assembly of 96
filters per cycle (i.e. over 1.100 per minute). Comparable systems only manage
about 500 pipette tips per minute, i.e. not even half of this number. Next to the
© 2014 Messe Düsseldorf GmbH
246
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
significant increase of speed and, thus, of productivity, another reason for the
amazement caused was the tiny footprint in spite of the performance of the system. Another big plus is the easy and quick changeover to other filter formats.
See this at K Show 2013 in Dusseldorf/Germany Hall 10 / D40
Product Overview
Hekuma GmbH
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.005
Plastics products and parts for household/consumer
02.03.012
Plastics products and parts for medical engineering
03.07.003.01
Handling devices
03.07.003.02
Manipulating industrial robots, reprogrammable
03.07.003.03
Assembly systems
Product Details
02.03.012
Hekuma GmbH
ities range from optical tests, as can be seen at K 2013, to assembly steps to
packaging and / or palletizing operations.
HEKUMA live at FANUC – Hall 15 / B25
At Fanuc (Neuhausten / Germany) in Hall 15, Booth B25, HEKUMA presets the
basic module of Sigma inside. A classical application for high volume production
of simple parts in the medical device market is demonstrated. The product End
Cap, a needle holder for syringes, is removed from a 48-cavity mold provided
by Tanner Formenbau (Feuerthalen / Switzerland), and collected separated by
cavity in a trolley.
Helios Italquartz S.r.l.
Address
Via delle Industrie, 103/A
20040 Cambiago / MI
Italy
Phone
+39 02 95349318
Fax
+39 02 95345085
Internet address
www.heliositalquartz.com
E-Mail
info@heliositalquartz.com
Stand
Hall 11, G39 (Page 902)
Plastics products and parts for medical engineering
HEKUMA live at ENGEL – Hall 15 / B42
At K 2013 HEKUMA presents in partnership with injection molding machine manufacturer ENGEL (Schwertberg / Austria) and toolmaker Braunform (Bahlingen
/ Germany) a highly automated manufacturing cell for the production of needle
holders for insulin pens that demonstrates process safety that is hard to beat.
The system produces parts with a 0.3mm hole on a 96-cavity mold. The incorporated camera based quality insurance system detects parts with missing or
closed hole. Due to the cavity separated collection of the parts the reject parts
can be disposed of automatically. The balanced mold can continue production
without the need to switch off the affected cavity.
This production cell is based on the production concept Sigma inside. Sigma
inside is a modular concept that adapts to your individual needs. The possibil-
© 2014 Messe Düsseldorf GmbH
247
© 2014 Messe Düsseldorf GmbH
248
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
09/17/2013
Helios Italquartz S.r.l.
Helios Quartz Worldwide
Product Details
02.02.005
Helios Italquartz S.r.l.
Welding
SPECIAL SHAPE INFRARED EMITTER
Helios Italquartz S.r.l. is present with its own distribution
channels in three continents (North America, Asia and Europe).
Helios Quartz America Inc.
Thanks to the great experience in the production of IR lamps
and in the processing of quartz glass items, Helios Italquartz
is able to manufacture infrared emitters in various IR wavelengths (medium wave, short wave and medium-fast) with
non-linear shape is in single and twin quartz tube:
Distributor - Logistic and Technical center for North America
region:
8444 W. Central Ave., # 2 Sylvania, OH. 43560, USA
• circular shape omega emitter;
Email: info@heliosquartz.com;
• oval shape emitter;
Web site: www.heliosquartz.com
Distributor and Logistic center for Asia Pacific region:
• linear IR lamps but with the cables connection 90° with respect to the body of
the lamp;
Helios Quartz Asia Ltd.
• 3D contoured shape also according to the profile of the object to be heated;
19th Floor, Silver Fortune Plaza, 1 Wellington Street, Central, HK.
• serpentine infrared emitters;
E-mail : info@heliosquartz.hk
Special Circular or Oval Shape emitters are very convenient because is possible
to heat an object in tubular form using one single IR lamp.
Web Site : www.heliosquartz.hk
Regarding special shape profile IR lamps that follows the contour of the object to
be heated, Italquartz Helios Srl, once received the design and specification from
the customer is able to design, develop and produce in-house graphite forms to
support the production of the lamp body, providing the customer with the finished
product.
Distributor and Logistic center for China Mainland region:
Shenyang Helios Tech. Co. Ltd.
Logistic center : Shenyang, Liaoning, China
Sales and Technical Center: Kunshan, Suzhou, China
These types of lamps are particularly appreciated for applications in the automotive industry in welding, bending, thrmoforming and heating of pipes and plastic
parts.
E-mail : info@heliosquartz.cn
Web site: www.heliosquartz.cn
Product Overview
Helios Italquartz S.r.l.
02.02.005
Welding
03.09.007
Accelerated weathering equipment
03.10.005
Heating elements
© 2014 Messe Düsseldorf GmbH
249
© 2014 Messe Düsseldorf GmbH
250
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Schwarzpunkt has advanced solutions for e.g. finishing technologies and a
strong network with highly specialized local toolmakers for thermoset moulds.
Thanks to their wide network with material suppliers and Universities (Munich
and Chemnitz) Schwarzpunkt has strong resources to develop new applications
and material characteristics. This acquisition fits therefore perfectly in our growth
strategy and our ambition to support our customers in the Automotive industry
worldwide. Because we are very complementary, this will create further growth
perspective for Schwarzpunkt as well. After a transition period the company
name Schwarzpunkt will be changed into Helvoet Rubber & Plastic Technologies
GmbH to emphasize the international presence of Helvoet towards our global
customers”.
Helvoet Holding B.V.
Address
Sportlaan 13
3223 EV Hellevoetsluis
Netherlands
Phone
+31 181 331333
Fax
+31 181 331338
Internet address
www.helvoet.com
E-Mail
info.hellevoetsluis@helvoet.com
Product Overview
Stand
Hall 05, F10 (Page 874)
02.01.010
Parts made by injection moulding
02.02.001
Vapour-deposit decorating
02.02.003
Printing
02.03.002
Plastics products and parts for automotive
02.03.007
Plastics products and parts for electrical engineering
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
Company News
07/29/2013
Helvoet Holding B.V.
Helvoet Holding B.V.
Helvoet strengthens position in the Automotive market
11-01-2013
Helvoet Holding BV, manufacturer of high precision custom made plastic and
rubber components, and Schwarzpunkt Schwarz GmbH & Co in Gilching (Bayern/Germany) agreed to a merger in which Helvoet has acquired all shares of
Schwarzpunkt.
Schwarzpunkt, established in 1949, is a small-sized high-tech Munich based
family-owned business specialized in the development, production, assembly
and testing of thermoset and thermoplastic applications with a strong focus on
the automotive industry. The company employs about 40 people.
Peter Rijkoort, CEO Helvoet Group says: ”The integration of Schwarzpunkt into
Helvoet Group is fully in line with Helvoet’s strategic aim to expand and consolidate our activities in selected segments like the automotive industry. It also
strengthens our position on the German market with this location close to automotive and industrial customers in the important geographic area Stuttgart –
Nürnberg - Munich. Schwarzpunkt adds a strong network and important development capabilities to Helvoet and this will enable Helvoet to support its blue
chip customers with a broader product portfolio of dedicated and assembled
components.
© 2014 Messe Düsseldorf GmbH
251
© 2014 Messe Düsseldorf GmbH
252
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.003.03
Parts from high performance thermoplastics
02.04.003.04
Parts from free flowing thermosets
Product Details
02.02.005
Heraeus Noblelight GmbH
Welding
Special IR heaters
02.04.003.05
Technical Parts from Bulk Molding Compound / Sheet
Molding Compound
02.05.011
Sealings/Sealrings
02.05.028
Rubber / plastics / metal combinations
02.05.050
Parts for pumps
02.05.073
Valves
Heraeus has developed special emitters to meet all
requirements where only very small or curved faces,
edges or contours need heating. Common to all of these
emitters is their focus in shape, size and spectrum to the
desired process.
Herding GmbH Filtertechnik
Address
August-Borsig-Str. 3
92224 Amberg
Germany
Phone
+49 9621 630-0
Fax
+49 9621 630-120
Internet address
www.herding.de
E-Mail
info@herding.de
Stand
Hall 12, B49 (Page 906)
Heraeus Noblelight GmbH
Address
Heraeusstr. 12-14
63450 Hanau
Germany
Phone
+49 6181 358492
Fax
+49 6181 35168492
Internet address
www.heraeus-noblelight.com
E-Mail
hng-infrared@heraeus.com
Stand
Hall 10, G59 (Page 900)
Product Overview
Heraeus Noblelight GmbH
02.02.005
Welding
03.10.005
Heating elements
© 2014 Messe Düsseldorf GmbH
253
© 2014 Messe Düsseldorf GmbH
254
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ist.
Product Overview
Herding GmbH Filtertechnik
02.05.020
Filters and parts
03.01.008
Compounding lines
03.08.004
Dust and fume extraction systems
04.06
Science and consulting
Product Details
02.05.020
Huntsman
Herding GmbH Filtertechnik
Address
Titanium House
TS22 5FD Stockton On Tees
Great Britain / Northern Ireland
Phone
+44 1740 608246
Fax
Filters and parts
Internet address
www.huntsman.com
E-Mail
jane_williamson@huntsman.com
Stand
Hall 08b, F79 (Page 890)
Herding Filterelemente
Produktbeschreibung
Die Filtermedien der Herding GmbH Filtertechnik wurden und werden von der Praxis für die Praxis entwickelt
und erfüllen bereits heute die umwelttechnischen Anforderungen von morgen. Der Grundkörper (Starrkörper) wird gesintert und anschließend beschichtet. Damit sind alle Herding®
Filtermedien als mechanische Oberflächenfilter, die online-abreinigbar sind,
einzuordnen.
Generell zeichnen sie sich durch höchste Abscheidegrade < 0,2 mg/m³ (staubabhängig) und Standzeiten bis 15 Jahre und mehr aus.
Sie decken einen Temperaturbereich bis 450° C ab.
Kundennutzen
Geringe Wartungskosten durch lange StandzeitenGleichbleibendes Absaugvolumen durch konstanten DruckverlustAbsolut faserfrei und somit ideal für Produktrückgewinnung
Besonderheiten
Alle Filtermedien werden im eigenen Haus unter höchsten Qualitäts- und Prüfbedingungen gefertigt. Jedes Herding Filterelement erhält eine eigene Identität über RFID. Bei der Beschichtung handelt es sich nicht um eine empfindliche Membrane, sondern es wird eine mikroporöse und hydrophobe PTFEBeschichtung aufgebracht, die zerstörungsarm in den Grundkörper eingelagert
© 2014 Messe Düsseldorf GmbH
255
Company News
08/23/2013
Huntsman
Huntsman to Showcase ALTIRIS® Infrared Reflecting
Pigment at K2013
Wynyard, UK – Huntsman Corporation (NYSE: HUN) will
showcase its new ALTIRIS® infrared reflecting pigment
for polymers at K2013 in Düsseldorf, Germany on 16 –
23 October.
Huntsman’s ALTIRIS® infrared reflecting pigment is a titanium dioxide based pigment that preferentially reflects
infrared radiation (heat) from the sun. When mixed with
colored pigments the result is higher(1) solar reflectance
in an unprecedented range of colorful polymers including dark and vibrant
shades.
Polymer products with high solar reflectance can stay cooler under the sun’s
intense heat, helping to reduce overall heat build-up which can prevent heat
distortion and premature failure.(2) Increasing the solar reflectance of polymers
© 2014 Messe Düsseldorf GmbH
256
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
can help open up new markets for polymer products as they become less prone
to warping. This means polymer products could be used in warmer regions of
the world where they would have previously been unsuitable.
ple locations worldwide. The Company had 2012 revenues of over $11 billion.
For more information about Huntsman, please visit the company’s website at
www.huntsman.com.
Sean Reid, business development manager at Huntsman said, “Expanding customer choice when it comes to building materials provides impetus for innovation
and exterior polymer products are no exception. We believe that there is scope
for a new generation of polymers that are colorful and can better reflect the heat.
ALTIRIS® pigment is designed to substantially increase the solar reflectance
properties of a very wide range of colored polymers and has the potential to deliver energy efficiencies and expand customer choice. The pigment delivers a
unique set of benefits: tailored solar reflectance from a single additive and in
almost any color customers need. This combination was not available before
Huntsman’s ALTIRIS® pigment.”
Huntsman’s pigments business
ALTIRIS® pigment won the IChemE award for product innovation in 2012 and
was a winner in the pigments category of the 2013 Ringier Technology Innovation Award in May. It has been nominated for a 2013 Plastics Industry award.
Ends
Footnotes:
Huntsman is a leading global producer of specialist titanium dioxide pigments.
Our titanium dioxide pigments primarily deliver whiteness, brightness and opacity to a vast range of products; from coatings and polymers to cosmetics and
food. They can also help to increase the longevity of products and in some cases
help to reduce energy consumption. We have been manufacturing titanium dioxide pigments for more than 75 years and are proud to serve a wide range of market sectors. We are a customer focused, innovative business and our experts
have created global brands that include TIOXIDE® titanium dioxide pigment,
award winning DELTIO® free-flow titanium dioxide pigment and our very latest
innovation, ALTIRIS® infrared reflecting pigment that gives exterior coatings and
polymers in almost any color the power to reflect solar energy. We operate our
pigments business in line with our business values and our products are made at
seven manufacturing sites with over 2,500 people. For more information about
Huntsman’s pigments business, please visit www.huntsman.com/pigments
Forward-Looking Statements
(1) Compared to TIOXIDE® pigment. Our specialist research team prepares
coatings and polymers containing ALTIRIS® pigment and control samples using TIOXIDE® pigment with the same RAL index. We then compare solar reflectance using a Cary 5000 spectrophotometer. We use a method to measure
heat build-up in polymers based on ‘Use of reflectance spectra to predict heat
build-up of pigmented PVC panels; Sullivan, Peak: 1993’.
(2) ‘Heat build-up in PVC exterior building products due to absorption of the
energy from the sun may lead to distortion problems. Heat build-up is affected
by the color, emittance, absorptance, and reflectance of a product. Generally,
the darker the color of the product, the more energy is absorbed and the greater
is the heat build-up’; ASTM D4803
http://www.astm.org/Standards/D4803.htm
Please visit the ALTIRIS® pigment website for more information http://altiris.huntsman.com/
Statements in this release that are not historical are forward-looking statements.
These statements are based on management’s current beliefs and expectations.
The forward-looking statements in this release are subject to uncertainty and
changes in circumstances and involve risks and uncertainties that may affect
the company’s operations, markets, products, services, prices and other factors
as discussed in the Huntsman companies’ filings with the U.S. Securities and
Exchange Commission. Significant risks and uncertainties may relate to, but
are not limited to, financial, economic, competitive, environmental, political, legal, regulatory and technological factors. The company assumes no obligation
to provide revisions to any forward-looking statements should circumstances
change, except as otherwise required by applicable laws.
ALTIRIS®, DELTIO® and TIOXIDE® are registered trademarks of Huntsman
Corporation or an affiliate thereof in one or more, but not all, countries
About Huntsman:
Huntsman is a global manufacturer and marketer of differentiated chemicals.
Our operating companies manufacture products for a variety of global industries,
including chemicals, plastics, automotive, aviation, textiles, footwear, paints and
coatings, construction, technology, agriculture, health care, detergent, personal
care, furniture, appliances and packaging. Originally known for pioneering innovations in packaging and, later, for rapid and integrated growth in petrochemicals, Huntsman has approximately 12,000 employees and operates from multi-
© 2014 Messe Düsseldorf GmbH
257
08/23/2013
Huntsman Promotes Innovations for the Polymers
Market at K2013
WYNYARD, UK – Huntsman, a global manufacturer and marketer of differentiated chemicals, today announced that it will exhibit at K2013 in October.
Huntsman manufactures an extensive portfolio of products and technologies including amines and adhesives, carbonates and curing agents, isocyanates and
© 2014 Messe Düsseldorf GmbH
258
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
surfactants, thermoplastic polyurethanes, polyurethanes and titanium dioxide
pigments – all designed to help customers drive value and performance from
their polymer formulations. At K2013 Huntsman will showcase a range of innovations including:
ALTIRIS® infrared reflecting pigment - Huntsman’s new award winning titanium
dioxide pigment, developed in response to a global challenge to help reduce
energy consumption. The pigment is designed to increase the solar reflectance
of colored polymers to help reduce heat build-up and distortion.
Additions to the AVALON® TPU footwear range - for design flexibility with TPU
grades that are highly transparent and UV stabilized.
DELTIO® pigment – a low dust, free-flow titanium dioxide pigment for bright
white polymers
The forward-looking statements in this release are subject to uncertainty and
changes in circumstances and involve risks and uncertainties that may affect
the company’s operations, markets, products, services, prices and other factors
as discussed in the Huntsman companies’ filings with the U.S. Securities and
Exchange Commission. Significant risks and uncertainties may relate to, but
are not limited to, financial, economic, competitive, environmental, political, legal, regulatory and technological factors. The company assumes no obligation
to provide revisions to any forward-looking statements should circumstances
change, except as otherwise required by applicable laws.
ALTIRIS®, AVALON®, DELTIO®, IROGRAN® and TIOXIDE® are registered
trademarks of Huntsman Corporation or an affiliate thereof in one or more, but
not all countries.
© 2013 Huntsman Corporation. All rights reserved.
IROGRAN® A 95 P 5003 TPU - a halogen-free TPU with excellent flame retardancy for industrial and consumer wire and cable applications.
Specific IROGRAN® TPU grades - manufactured to exacting specifications, for
use in food contact applications such as conveyor belts, hoses and tubes.
Product Overview
Huntsman
Material solutions for the automotive industry - including scratch resistant paint
protection films, hotmelts and fast cycling, injection molding parts.
01.01.010.11
Compounds
Specialist TIOXIDE® titanium dioxide pigments - for high performance masterbatch and films and for high temperature polyethylenes.
01.01.017
Compounds (Polymer blends)
Huntsman strives to work with its customers to help provide them with the solutions they need today and to develop technologies for the future.
01.01.021
Dry blend
Ends
01.01.037
Masterbatches
01.01.077
Polyethylene PE-HD
01.01.078
Polyethylene PE-LD
01.01.079
Polyethylene PE-LLD
01.01.080
Polyethylene PE-MD
01.01.094
Polystyrene (PS)
01.01.100
Polyurethane thermoplastic (PUR)
About Huntsman:
Huntsman is a global manufacturer and marketer of differentiated chemicals.
Our operating companies manufacture products for a variety of global industries,
including chemicals, plastics, automotive, aviation, textiles, footwear, paints and
coatings, construction, technology, agriculture, health care, detergent, personal
care, furniture, appliances and packaging. Originally known for pioneering innovations in packaging and, later, for rapid and integrated growth in petrochemicals, Huntsman has approximately 12,000 employees and operates from multiple locations worldwide. The Company had 2012 revenues of over $11 billion.
For more information about Huntsman, please visit the company’s website at
www.huntsman.com.
Forward-Looking Statements:
Statements in this release that are not historical are forward-looking statements.
These statements are based on management’s current beliefs and expectations.
© 2014 Messe Düsseldorf GmbH
259
© 2014 Messe Düsseldorf GmbH
260
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.01.106
Polyvinyl chloride plasticised (PVC-P)
01.01.107
Polyvinyl chloride rigid (PVC-U)
01.01.129
Thermoplastic urethane blends TPE-U/TPU
01.01.130
Huzap GmbH Waagen- und Anlagenbau
Address
Marie-Curie-Str. 1
53773 Hennef
Germany
Thermoplastic urethane TPE-U/TPU
Phone
+49 2242 96999-0
01.02.006
Polyisocyanate
Fax
+49 2242 96999-29
01.02.007
PUR-Elastomers
Internet address
www.huzap.com
01.02.011
Thermoplastic PUR-elastomer
E-Mail
huzap@huzap.com
01.06.007
Polyester fibres
Stand
Hall 09, A27 (Page 898)
01.08.012
Solvent-based adhesives
01.08.017
Hot melt adhesives
01.10.030
Colour pigments
01.10.047
Masterbatches
01.10.059
Adhesives
01.10.120
Crosslinking agents
01.10.127
White pigments
02.01.002
Products made by extrusion
02.04.001.10
Semi finished products of polyurethane (PUR)
02.05.068
Technical films
Product Overview
© 2014 Messe Düsseldorf GmbH
261
Huzap GmbH Waagen- und Anlagenbau
02.05.001
Apparatus and parts
02.05.006
Cointainers
02.05.020
Filters and parts
03.01.008
Compounding lines
03.03.011
Bag and sack making equipment
03.07.002.04.01
Pneumatic conveyors
03.07.002.04.02
Screw conveyors
© 2014 Messe Düsseldorf GmbH
262
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
03.07.002.04.04
Belt conveyors
03.07.002.04.05
Other conveyors (except factory trucks and carts)
03.07.002.05.02
Gravimetric dosing and metering equipment
03.10.001
Screws
Product Details
02.05.001
Hähl GmbH
Huzap GmbH Waagen- und Anlagenbau
Apparatus and parts
Our Products
Planning, production, installation of automatic and
semi-automatic bagging equipment,
net-/gross
bagging-, batching scales, mixing, hopper scales,
storing, batching and transporting equipment for the
chemical industry, mills, food and feed production
plants, the sugar and food industries, plastics and
rubber producers.
02.05.006
Eutinger Str. 29
75249 Kieselbronn
Germany
Phone
+49 7231 9523100
Fax
+49 7231 9523190
Internet address
www.haehl.com
E-Mail
gerd.vorbach@haehl.com
Stand
Hall 04, D52 (Page 870)
Product Overview
Hähl GmbH
02.05.007
Coatings
02.05.076
Rollers and roller coatings
03.10.002
Barrels
03.10.003
Rolls
Cointainers
Our Products
Planning, production, installation of automatic and
semi-automatic bagging equipment,
net-/gross
bagging-, batching scales, mixing, hopper scales,
storing, batching and transporting equipment for the
chemical industry, mills, food and feed production
plants, the sugar and food industries, plastics and
rubber producers.
02.05.020
Address
Product Details
02.05.007
Filters and parts
Coatings
EPDM Coatings
Our Products
Ethylen-Propylen-Dien-Monomer (EPDM) ist ein Elastomer (=Gummi), bzw. ein synthetischer Kautschuk.
Feuchtigkeitsbeständigkeit und Ozonresistenz, sowie
eine hohe Temperaturbeständigkeit sind Eigenschaften
von EPDM Beschichtungen.
Planning, production, installation of automatic and
semi-automatic bagging equipment,
net-/gross
bagging-, batching scales, mixing, hopper scales,
storing, batching and transporting equipment for the
chemical industry, mills, food and feed production
plants, the sugar and food industries, plastics and
rubber producers.
© 2014 Messe Düsseldorf GmbH
Hähl GmbH
263
© 2014 Messe Düsseldorf GmbH
264
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Hartchrom Beschichtung Coatings
ifw mould tec GmbH
Hartchrom-Walzenoberflächen verfügen neben der Verschleißeigenschaft Härte mit bis zu 950 HV, abhängig
von der jeweiligen Schichtstärke, ebenso über eine Korrosionsbeständigkeit.
Im Mehrschichtverfahren werden Hartchromschichten
von 30µm bis 120µm, in Sonderfällen bis zu 200µm,
Fertigschichtstärke aufgebracht.
02.05.076
Address
Pyhrnstr. 73
4563 Micheldorf
Austria
Phone
+43 7582 62556
Fax
+43 7582 64753
Internet address
www.ifw.at
E-Mail
office@ifw.at
Stand
Hall 01, C26 (Page 864)
Rollers and roller coatings
Einfachmantel Gießwalze
Der Vorteil der Einfachmantelgiesswalze ist ihre einfache Bauweise, die gute Reinigungsmöglichkeit und
die ausreichende Abkühlleistung, in Verbindung mit
dem Wasserband bei BOPP Anlagen.
Für Reckfolienanlagen (BOPP) bieten Einfachmantelgiesswalzen eine interessante wirtschaftliche Alternative gegenüber dem bekannten Bauprinzip der Doppelmantelwalzen. Das
Kühlmedium Wasser wird durch ein Sprühdosensystem an die Innenfläche des
Aussenrohres gespritzt. Der Rücklauf erfolgt über ein Syphon System am Boden der Einfachmantelwalze.
Product Overview
Einfachmantel Walzen
Product Details
Die Verwendung von Einfachmantelkonstruktionen stellt
für gewöhnlich durch ihr minimiertes Gewicht und ihre
hohe Kosteneffizienz eine zweckmäßige und funktionsfähige Lösung dar. Ausgestattet beispielsweise mit
einem Außenmantel aus Stahl und verschieden ausgeführten Boden-Zapfen-Konstruktionen entweder für
Einscheiben- und Zweischeibenkonstruktionen oder auch
als Vollbodenkonstruktionen. Weiterhin bewähren sich die Einfachmantelwalzen als Heiz- oder Kühlwalze mit zusätzlichen Scheiben oder Sprührohren
im Innenraum.
Zum Einsatz kommen konventionelle Einfachmantelwalzen in den unterschiedlichsten Funktionsbereichen, u.a. als Anpress-, Beschichtungs-, Leit-, Mess-,
Transport-, Umlenk-, Glätt-, Kraftübertragungs- oder Kalanderwalze.
© 2014 Messe Düsseldorf GmbH
265
ifw mould tec GmbH
02.01.010
Parts made by injection moulding
03.06.001
Injection and compression moulds
02.01.010
ifw mould tec GmbH
Parts made by injection moulding
Injection moulds
High-Tech Moulds for Fittings
Fittings that are produced with ifw moulds are used worldwide in sanitary and
storm sewer systems, drinking water supply, roof drains, irrigation, drainage, gas
supply, ventilation and exhaust systems.
High-Tech Moulds for Specialties
Every ifw mould is tailored to the customer’s specifications. Our experienced
designers work with state-of-the-art systems in order to develop perfect moulds.
Basic Moulds Concepts
We supply our customers with an array of basic mould concepts for lower num-
© 2014 Messe Düsseldorf GmbH
266
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
bers of parts that are a cost-efficient alternative to our high-tech moulds. These
basic moulds are made of standard components to enable more cost-effective
production. As for our high-tech moulds, the raw materials used are of European origin and meet our high standards of quality. Our basic mould concepts
are therefore ideal as cost-effective, entry-level options in the ifw mould range.
Automation Solutions
The Efimatic segment focuses on semi and fully automatic production of complex plastic parts, such as electrofusion fittings. The modular system design
enables fittings of various different types (e.g. sockets, elbows, tees, etc.) and
dimensions (20 mm to 400 mm) to be manufactured.
Product Overview
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
igus® GmbH
Address
Spicher Str. 1a
51147 Köln
Germany
Phone
+49 2203 9649-0
Fax
+49 2203 9649-222
Internet address
www.igus.de
E-Mail
mgorges@igus.de
Stand
Hall 05, A34 (Page 874)
© 2014 Messe Düsseldorf GmbH
267
igus® GmbH
© 2014 Messe Düsseldorf GmbH
268
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.015
Plastics products and parts for transport/packaging
Product Details
02.03.016
Plastics products and parts for optics/precision
engineering
02.03.001
other and machined semi finished products / Pre-cut
parts
02.04.003.03
Parts from high performance thermoplastics
Parts from free flowing thermosets
02.05.001
Apparatus and parts
02.05.011
Sealings/Sealrings
Plastics products and parts for plant building
iglidur®
02.04.001.14
02.04.003.04
igus® GmbH
iglidur® zur freien Gestaltung – jetzt auch als Rundmaterial oder gleich in mechanisch endbearbeiteten Wunschformen – für Prototypen, Testmuster und kleine Serienbedarfe.
iglidur®-Werkstoffe als Rundmaterial ab Lager oder mechanisch fertig bearbeitete Wunschformen und –größen in 3 bis 5 Tagen Schnell und günstig berechenbare Lebensdauer jetzt auch für mechanisch bearbeitete Gleitlager
IKS Schön GmbH
02.05.014
Electrical equipements-parts
02.05.018
Television sets - parts
02.05.019
Address
Am Fuchsberg 6
41468 Neuss
Germany
Film cameras, cameras - technical parts
Phone
+49 2131 38424-0
02.05.020
Filters and parts
Fax
+49 2131 38424-48
02.05.032
Laboratory equipment- technical parts
Internet address
www.weltderkunststoffe.de
02.05.045
Micro parts
E-Mail
kontakt@iks-schoen.de
02.05.050
Parts for pumps
Stand
Hall 06, D76 (Page 878)
02.05.068
Technical films
© 2014 Messe Düsseldorf GmbH
269
© 2014 Messe Düsseldorf GmbH
270
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Product Overview
IKS Schön GmbH
IKS Schön GmbH
02.01.006
02.01.006
Parts made by mechanical treating
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.007
Plastics products and parts for electrical engineering
02.03.009
Plastics products and parts for agriculture
Parts made by mechanical treating
CNC - Drehteile, Frästeile der gesamten Kunststoffpalette
Auf modernsten CNC-Maschinen drehen, fräsen, verzahnen, sägen, hobeln,
bohren, kleben, kanten, schweißen wir sämtliche Kunststoffe, aus der Produktpalette der Thermoplaste, Duroplaste und Elastomere.
Wer die ganze Welt der technischen Kunststoffe bieten kann, ist fähig, mehr zu
leisten.
Bei IKS können sie darauf vertrauen, stets den idealen Werkstoff für ihre Anwendung zu finden.
Dabei sind schnelle und unkomplizierte, weil ISO zertifizierte Abwicklungsprozesse
- vom Angebot bis zur Lieferung - unsere Antwort auf die Forderung des Marktes
nach maximaler Effizienz.
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
02.03.014
Plastics products and parts for food processing
industry
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.04.001.10
Semi finished products of polyurethane (PUR)
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
Unsere Möglichkeiten für den Automobilbau
02.04.003.01
Parts from standard plastics
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.03.001
Plastics products and parts for plant building
Unsere Möglichkeiten für den Anlagenbau
© 2014 Messe Düsseldorf GmbH
02.03.002
Plastics products and parts for automotive
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
271
© 2014 Messe Düsseldorf GmbH
272
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.007
Plastics products and parts for electrical engineering
02.03.011
Plastics products and parts for mechanical engineering
Unsere Möglichkeiten für die Elektrotechnik
Unsere Möglichkeiten für den Maschinenbau
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
02.03.009
02.03.012
Plastics products and parts for agriculture
Plastics products and parts for medical engineering
Unsere Möglichkeiten für Kst-waren im Bereich Landwirtschaft
Unsere Möglichkeiten in der Medizintechnik
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
02.03.010
02.03.014
Plastics products and parts for aviation
Unsere Möglichkeiten für die Luftfahrtindustrie
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
© 2014 Messe Düsseldorf GmbH
273
Plastics products and parts for food processing industry
Unsere Möglichkeiten für die Nahrungsmittelindustrie
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
© 2014 Messe Düsseldorf GmbH
274
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
PTFE
PTFE – Polytetrafluorethylen
Dieser Werkstoff besitzt die höchste Chemikalienresistenz in der Gegenüberstellung gängiger Sterilisationsverfahren (mit Ausnahme energiereicher Strahlung)
und besitzt die FDA-Zulassung. Einsetzbar ist dieses
Produkt bei einer Dauertemperatur von bis zu 260°C. Es besitzt ein ausgezeichnetes Gleitverfahren sowie hervorragende elektrische Eigenschaften und kann
mit diversen Füllstoffen wie Glasfaser, Kohle, Bronze oder MOS2 versehen werden.
Vollstangen, Folien, Platten, Furnierbänder, Rundschnurringe, Spaghetti-Schläuche,
Schläuche, Hohlstäbe, Presslinge und Gewindebänder aus PTFE führen wir in
verschiedenen Abmessungen und Materialstärken.
Zögern Sie nicht, uns zu kontaktieren, falls Sie irgendwelche Fragen oder
spezielle Anforderungen haben sollten.
vergleichbar ist. Es findet Anwendung wenn ein Härtebereich zwischen Gummielastischen Werkstoffen und harten Werkstoffen wie (POM, PE) gesucht wird.
Die Shore-Härten betragen 50° bis 95° und das Material wird in Platten, Vollstangen oder kundenspezifischen Formen gegossen. In nachstehenden Bereichen
findet das Material Anwendung:
Baumaschinen Abstreifleisten Schneepflugleisten Streuteller Greiferleisten Fördertechnik Ablaufrillen Membranen Sterne Siebmatten
Maschinenbau Antriebswellen Federelemente Lager Dichtungen Pipeline Bürstenrollen Stöße Stahlbau Diabolorollen Laufrollen Führungsrollen Walzen
Sucht man einen Werkstoff der folgende Eigenschaften aufweisen muss:
• Geringer Druckverformungsrest
• Hoher Weiterreißwiderstand
• Sehr hoher mechanischer Verschleißwiderstand
... ist man bei Polyurethan genau richtig!
Zögern Sie nicht, uns zu kontaktieren, falls Sie irgendwelche Fragen oder spezielle
Anforderungen haben sollten.
02.04.001.13
02.04.001.10
Semi finished products of polyurethane (PUR)
Semi-finished parts/products
reinforced plastics
made
from
fibre-
Polyurethan - PU
Faserverstärkte Kunststoffe
Ein Polyurethan (kurz PU, oder PUR) können wir Ihnen in Form von Platten,
Fertigteilen (wie aufvulkanisierten Stahlteilen), aber auch als Schutz-, Absaugund Folienschläuche liefern.
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Polyurethane finden dann eine Anwendung, wenn ein Härtebereich (70°, 80°
und 90° Shore) zwischen Gummi-elastischen Werkstoffen und harten Werkstoffen (wie POM, PE) gesucht wird. Sucht man einen Werkstoff der folgende
Eigenschaften aufweisen muss: • Geringer Druckverformungsrest • Hoher Weiterreißwiderstand • Sehr hoher mechanischer Verschleißwiderstand ist man bei
Polyurethan genau richtig!
Das Haupteinsatzgebiet ist die Industrie, aufgrund der guten Eigenschaften, des
Werkstoffes.
Platten aus PU - Polyurethan führen wir in verschiedenen Abmessungen und
Materialstärken.
Informieren Sie sich vorab über unser Standard-Lieferprogramm anhand der hier
für Sie abgelegten PDF-Datei.
PU – Polyurethan ist die Bezeichnung für ein Polyurethan, das mit dem eingetragenen Warenzeichen der Firma Bayer auch als Vulkollan® hergestellt wird, bzw.
© 2014 Messe Düsseldorf GmbH
275
Ob Verarbeitung zu Drehteilen, Frästeilen oder Spritzgussteilen, Lagerung und
Lieferung von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche
Produkte und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
02.04.003.01
Parts from standard plastics
Unser Produktfortfolio für Standard-Kunststoffe
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
© 2014 Messe Düsseldorf GmbH
276
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
Impact Solutions
Address
16 Abbotsinch Road
Grangemouth
Great Britain / Northern Ireland
Unser Produktportfolio für technische Thermoplaste
Phone
+44 1324 489-182
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
Fax
+44 1324 489-633
Internet address
www.impact-solutions.co.uk
02.04.003.02
Parts from engineering plastics
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
02.04.003.03
Parts from high performance thermoplastics
E-Mail
Stand
Hall 12, D35 (Page 906)
Company News
Impact Solutions
Unser Produktportfolio für Hochleistungs-Kunststoffe
Als Großhändler und Verarbeiter von Kunststoffen bieten wir Ihnen die gesamte
Produktvielfalt von Elastomeren, Thermoplasten und Duroplasten.
10/01/2013
Expert Witness Services
Ob Verarbeitung zu Dreh-, Fräs-, oder Spritzgussteilen, Lagerung und Lieferung
von Halbzeugen namhafter Hersteller, bei uns erhalten sie sämtliche Produkte
und Leistungen aus einer Hand.
Based on a comprehensive understanding of polymers,
its experience of the plastics industry and expertise in failure analysis, Impact are able to provide Expert Witness
services to the legal and insurance industries.
Unser Unternehmen verfügt über Expertise in folgenden Produktionsbereichen:
Maschinenbau, Medizin-, Fahrzeug-, Elektro-, Anlagen- sowie Fördertechnik,
Elektronik, Baumaschinen uvm. . Glasklare Materialien gehören dabei genauso
zum Tagesgeschäft wie hochwertige Konstruktions- und Isolierwerkstoffe.
Our technical team comprises of materials scientist’s,
chemists and processing engineers with analytical work
being undertaken in our UKAS accredited laboratory.
For more information visit us in Hall 12 Stand D35
10/01/2013
Oil & Gas Services
Impact Solutions has extensive experience in high
performing polymers and composites operating at the
temperatures, pressures and aggressive environments
often found down hole and in the distribution of oil & gas.
Some of Impact’s recent technical programmes include:
Condition assessment, lifetime assessment and failure analysis of Swage-lined
crude oil pipe. Material evaluation program looking at the reduction of stress
© 2014 Messe Düsseldorf GmbH
277
© 2014 Messe Düsseldorf GmbH
278
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
cracking of PVDF grades used in risers. Material selection for down hole cables
and lifetime cost : benefit summary. Condition assessment of PE100 coupons
in gas pipelines. Environmental resistance of material used in data cables.
10/01/2013
For further information, visit our stand in Hall 12, Stand D35.
Impact Solutions has extensive experience of Plant
Optimisation and Operational Excellence programs including statistical process control (SPC) and the use of
our own bespoke software PLANTHEALTH to monitor
performance and track variable costs .
10/01/2013
Training Solutions for the Petrochemical & Plastics
Intustry
Operational Excellence & Organisational Development
Programs
APC implementation requires good lower level control and a thorough understanding of the influence of
a broad range of process parameters upon key product attributes. Impact’s independent experts can identify suitable opportunities - for more information visit
our stand at Hall 12 Stand D35.
Staff are a company’s most valuable asset and having
a well trained and motivated workforce will always be
at the heart of a strong and successful company.
Impact provides on-site specialist training courses to
meet the demands of the international petrochemicals
and plastics industry.
10/01/2013
Lab Design
Recent examples are:
General technical and economic introduction to petrochemicals and plastics.
Polyolefins manufacturing and product applications, including specialised pipe
programs. Operational excellence in petrochemical, polymer plants & laboratories. Team working, project management and leadership. Change management
, innovation management and problem solving.
For further information visit us in Hall 12 Stand D35.
09/30/2013
Recycling
Impact are technical experts for WRAP and Zero Waste Scotland and have
undertaken extensive research on post-consumer plastic, fibre composites and
plastic separation technologies. We also have extensive experience in adding
value to low cost plastics and incorporating recycled mineral fillers into polymer
systems.
© 2014 Messe Düsseldorf GmbH
279
Impact Solutions’ technical team have extensive experience of the design, construction and commissioning
of a wide range of analytical, physical, material processing and pilot plant laboratories.
It undertakes a range of projects from design, layout,
equipment selection and provides a range of support
services such as optimisation using Impact’s own bespoke software LABHEALTH.
It also supports HSEQ audits and procedures as well as ISO 17025 implementation support.
In addition Impact delivers staff and customer training covering products, applications and key technology areas.
For more information visit us in Hall 12 Stand D35.
© 2014 Messe Düsseldorf GmbH
280
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
10/01/2013
Storage Tank Testing
10/01/2013
Rotationally moulded PE tanks have become a common sight in many gardens and working areas throughout the rural regions of the UK and Ireland for storage of large quantities of heating fuel and chemicals.
Impact has tested almost 300 models to a range of
standards including BSEN13341:2005+A1:2011 OFTEC OFST100 BSEN13575:2012 AS/NZS 4766:2006
and has also undertaken an extensive study on tanks
that have failed in service. Impact’s experts have therefore developed a unique
understanding of the significant factors needed for ensuring tank longevitity.
Impact are UKAS accredited and a European notified body for the testing of
tanks, bunds and materials in accordance with EN13341, EN13575 and OFTEC
OFST100.
Experts in Pipes
Impact are accredited for ISO1167, ISO13479 & ISO9080
hydrostatic pressure testing of pipes and fittings. We
also offer a wide range of other services including CRing, FNCT, cohesive/de-cohesive resistance as well
as testing on electro-fusion & butt fusion joints to water
industry standards.
Impact offers an extensive range of technical services designed to serve the
needs of the pipe producer, installer, utility and main contractor i.e. the complete
supply chain, which include:
Joint testing & failure analysis On-site technical support & training Other pipe
testing Innovation e.g. Non destructive testing for use on electrofusion joints
For further information visit us in Hall 12 Stand D35
For more information visit us in Hall 12 Stand D35.
10/01/2013
Product Overview
Consumer Packaging Testing
Failure of containers when transporting dangerous chemicals and other hazardous liquids has serious implications
to people, property and/or the environment. Strict product
safety and quality standards are in place against which such
containers are tested to get UN approval.
Impact Solutions is accredited to carry out a comprehensive
range of UN Dangerous Good’s testing for liquids & solids
on plastic & metal drums & jerricans as well as composite
packaging & fibreboard boxes.
Impact Solutions
02.05.067
Tanks
02.05.075.02
Other fibre-reinforced plastic parts
04.01
Computer software services
04.06
Science and consulting
Product Details
Impact is one of a handful of European test houses that can test with the full
range of model liquids and the customer‘s own products.
For further information visit us in Hall 12 Stand D35.
02.05.067
Impact Solutions
Tanks
Testing of Rotationally Moulded PE Tanks
Rotationally moulded PE tanks have become a common sight in many gardens and working areas throughout the rural regions for storage of large quantities
of heating fuel and chemicals. Impact has tested
almost 300 models to a range of standards including BSEN13341:2005+A1:2011 OFTEC OFST100 BSEN13575:2012
AS/NZS 4766:2006 and has also undertaken an exten-
© 2014 Messe Düsseldorf GmbH
281
© 2014 Messe Düsseldorf GmbH
282
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
sive study on tanks that have failed in service. Impact’s experts have therefore
developed a unique understanding of the significant factors needed for ensuring
tank longevity.
Ensuring Quality and Safety Standards in the Supply Chain
From Impact’s failure research and a database of over 300 tanks over 10 years,
Impact has developed a detailed understanding of:
The choice of resin and additive package and how it is compounded The ability
of the moulder to process the compounded material The design of the tank to
resist long term deformation over time The effect on the plastic of the gaseous
phase as well as the liquid phase of the fuel leading to stress crack type failures.
Understanding how these factors work together in a product is essential to
ensure the integrity of tanks so they can have a safe working life of over 10
years—that’s safe containment without the associated high costs of failure.
Supporting Innovation in Product Safety
Impact has supported the development of an aluminium automotive Adblue®
tank which was roto-lined using a PE rotational moulding process. However,
the Adblue® was found to interact with the adhesive bond weakening it considerably..
Impact was able to develop a bespoke method of small-scale testing to enable an
accurate assessment of the adhesion at the PE/aluminium interface and screen
a number of resins that gave the best performance for safe containment over
time.
The product is now in the final stages of commercialisation.
02.05.075.02
Other fibre-reinforced plastic parts
Testing Laboratory
Impacts head office and UKAS 17025 accredited laboratory are based at Grangemouth, which has the UK’s
main processing, refining and petrochemicals centre for
North Sea Oil & Gas operations. Many of its team have
over 30 years experience and know-how and all of its
experts are highly qualified both technically and commercially.
Our Laboratory’s capabilities include:
Packaging: Impact is accredited to carry out a comprehensive range of UN Dangerous Good’s testing on plastic & metal drums and jerricans as well as composite packaging and fibreboard boxes. Impact is one of a handful of European
test houses and the only one in the UK that can test with the full range of model
liquids and customer own products.
Materials: Impact’s test laboratory is accredited for an extensive range of mechanical properties, including MFR, Density, Tensile, UV Weathering, Degradation, Absorption, Stress cracking to non accredited tests such as Charpy/IZOD
impact, creep, permeation and many more. We are often involved with the design of bespoke testing methods as required by the project.
Pipes: Impact are accredited for ISO1167, ISO13479 & ISO9080 hydrostatic
pressure testing of pipes and fittings. We also offer a wide range of other services including C-Ring, FNCT, cohesive/de-cohesive resistance as well as testing on electro-fusion & butt fusion joints.
Tanks: Impact are UKAS accredited and a European notified body for the testing of tanks, bunds and materials in accordance with EN13341, EN13575 and
OFTEC OFST100.
We are a member of OFTEC and have extensive experience of roto-moulding
and tanks having tested in excess of 90% of the polyethylene oil storage tanks
that are sold in the UK & Ireland.
Oil & Gas: Impact has extensive experience in high performing polymers and
composites operating at the temperatures, pressures and aggressive environments often found down hole and in the distribution of oil & gas. Impact’s experience includes pipes, risers, seals and cables in a range of polymers including
Polyolefin through Nylons, PVDF and PEEK. Our bespoke testing design and
capabilities includes simulation tests in conditions in excess of 40,000 psig and
200 C. Impact also carries out cost: benefit studies of products over design lifetime periods.
To learn more about how Impact Solutions can support you , please contact
Gregg Falconer on +44 (0) 1324 489182 or gregg.falconer@impact-solutions.co.uk.
Impact’s customers range from the largest international brands , plastic producers and small specialised producers who need our technical ability to solve
particular difficulties.
Impact adds significant value to its customers-always.
© 2014 Messe Düsseldorf GmbH
283
© 2014 Messe Düsseldorf GmbH
284
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Indiana Gummi GmbH
Address
Lise-Meitner-Str. 26
48691 Vreden
Germany
Phone
+49 2564 9330-0
Fax
+49 2564 9330-20
Internet address
www.indianagummi.de
E-Mail
info@indianagummi.de
Stand
Hall 07.1, B40 (Page 886)
Product Overview
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.08
Semi finished products of polystyrene (PS)
02.04.001.10
Semi finished products of polyurethane (PUR)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.002
Films
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.001
Apparatus and parts
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
Indiana Gummi GmbH
02.01.002
Products made by extrusion
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.02.005
Welding
02.03.001
Plastics products and parts for plant building
02.03.005
Plastics products and parts for household/consumer
02.03.009
Plastics products and parts for agriculture
© 2014 Messe Düsseldorf GmbH
285
© 2014 Messe Düsseldorf GmbH
286
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.023
Casings and cabinets
02.05.027
Rubber / plastics combinations
02.05.028
Rubber / plastics / metal combinations
02.05.032
Laboratory equipment- technical parts
02.05.034
Bearing boxes, bushes and sections
02.05.035
Weiterverarbeitung dieser und anderer thermoplastischer oder duroplastische Kunststoffe.
Industrie- und Handelskammer (IHK) Potsdam
Address
Breite Str. 2 A-C
14467 Potsdam
Germany
Bogie wheels and runners
Phone
+49 331 2786251
02.05.049
Boards and vulcanite boards
Fax
+49 331 2786190
02.05.050
Parts for pumps
Internet address
www.potsdam.ihk24.de
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
E-Mail
jens.ullmann@potsdam.ihk.de
02.05.068
Technical films
Stand
Hall 08b, E61-7 (Page 890)
02.05.080
Toothed wheels and racks
Company News
02.05.081
Extra springs made of micro-celled Potyurethane
Elastomers
10/14/2013
04.05
Subcontracting
Product Details
02.04.001.05
Indiana Gummi GmbH
Semi finished products of polyethylene (PE)
Nabolen Halbzeuge oder Fertigteile aus PE 500 u.
1000
Ramextrudierte Rundstäbe und Profile, Herstellung von
Halbzeugen aus hoch, und ultrahochmolekularem NiederdruckPolyethylen (PE-HMW / PE-UHMW) sowie die spanende
© 2014 Messe Düsseldorf GmbH
287
Industrie- und Handelskammer (IHK) Potsdam
„Plastics made in Berlin-Brandenburg” at the world’s
largest International Trade Fair for Plastics and Rubber
in Düsseldorf
Potsdam/Düsseldorf, 15. October 2013 - The German
Capital Region with 30 exhibitors (18 Brandenburg,
12 Berlin) marks a participation record at the world’s
largest International Trade Fair for Plastics and Rubber “K 2013”. For the third
consecutive time the German Capital Region Berlin-Brandenburg will participate
with its own pavilion at the Trade Fair “K 2013” taking place in Düsseldorf from
October 16th – 23rd 2013. Following the motto “Plastics by tradition and future
– Made in Berlin-Brandenburg” 21 exhibitors from Berlin-Brandenburg will be
present at the collective pavilion organized by the Potsdam Chamber of Commerce and Industry (IHK Potsdam) in hall 8b stand E 61. Altogether it is a record
breaking participation of 30 exhibitors from the German Capital Region BerlinBrandenburg.
© 2014 Messe Düsseldorf GmbH
288
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
10/14/2013
The following exhibitors are participating for the first time at the Berlin-Brandenburg
Pavilion: foxiflex GmbH & Co. KG, Kloster Lehnin (flexible recoil hoses to
feed plastic granulate and fiberglass reinforced plastics), Fraunhofer-PYCO, Teltow (development of polymers and composites; actual focal point at “K 2013”:
new nano materials), Mikroskoptechnik Rathenow GmbH (high-precision optical measurement and testing equipment), Märkische Faser GmbH, Premnitz (polyester and polyester fibres), Projektron GmbH, Berlin (software solutions for the plastics and rubber industry), Technamation Technical Europe
GmbH, Guben (bio polymers NATUREGRAN, composite EXTRUFIB) as well as
the Technische Universität Berlin/Technical University Berlin (Mobile ExpressRheometer: new mobile measurement method for plastics material characteristics).
„Plastics made in Berlin-Brandenburg” at the world’s
largest International Trade Fair for Plastics and Rubber
in Düsseldorf
Plastics by tradition and future – Made in Berlin-Brandenburg
Hall 8B, Stand E 61
company, address, website contact person, phone,
fax, email company profile
BK – Kunststoffe Bernau GmbH
Wandlitzer Chaussee 54
D – 16321 Bernau
Brandenburg has developed into a major hub for the European chemistry and
synthetics industries. With around 400 companies, 11,600 employees and a
turnover of more than €3 billion in the 2011 fiscal year, this cluster is a solid pillar
of the region’s industrial landscape and belongs to one of the ten most important
growth and export sectors. The cluster management is run by the ZukunftsAgentur Brandenburg (ZAB). Hardly any other economic sector in Brandenburg enjoys such close ties with other industries. The range of products stretches from
high-quality car paint that is used all over the world to innovative machine parts
and system components for the aerospace industry.
www.bernauer-kunststoffe.de
Additional information “K”
back several decades
The International Trade Fair for Plastics and Rubber “K” is taking place every
third year in Düsseldorf. With more than 3,100 exhibitors from 56 countries
the show is providing a comprehensive overview on machines and equipment,
materials and ready-made products from plastics and rubber. The organizer
Messe Düsseldorf is expecting more than 220,000 visitors from all over the world
this year.
- Solutions for thermosetting insolation materials in the
Contact:
Jens Ullmann, Director International Trade, IHK Potsdam, mobile: +49 (0) 176
12786251,
Mr. Grünberg
Manager
Phone +49 3338 393750
Fax +49 3338 393718
c.gruenberg@bernauer-kunststoffe.de
- Laminate manufacturing history in Bernau that goes
fields of substrate materials and resin systems
since 1994
- Ideal provider for technical composites due to our
material and application expertise
- DIN ISO 9001 : 2008 Certification since more than
12 years
- International Presence, regional Engagement
E-Mail: jens.ullmann@potsdam.ihk.de
foxiflex GmbH & Co.KG
Rietzer Berg 11
D-14797 Kloster Lehnin, OT Rietz
www.foxiflex.com
Ms Hiltrud Mütherich
© 2014 Messe Düsseldorf GmbH
289
© 2014 Messe Düsseldorf GmbH
290
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Phone: +49 3381 21121-14
- E-Beam curable resins, prepregs, laminates
Fax: +49 3381 21121-40
- Foams (acoustic, noise damping, flame-retardant,
muetherich@foxiflex.com
hard and soft, lightweight)
foxiflex – the hose specialist
- New core materials, e.g. nap core
- production of highly abrasion resistant hoses for
- Bistable displays for logistics
transport of plastic granules
Herotron E-Beam Service GmbH
- high temperature hoses up to +1.100°C for dryers
Guardianstrasse 6 - 10
- special gas hose for extrusion profiles
D- 06766 Bitterfeld-Wolfen OT Thalheim
- special hoses for transport of glass fibre and PET
www.herotron.de
granules
Yves Kaufhold
- from dia 10 mm up to 1.000 mm
Phone +49 3494 6666-0
- more than 3.000 products on stock
Fax +49 3494 6666-118
- sales network worldwide
info@herotron.com
Fraunhofer Research Institution for Polymeric Materials and Composites
Reliable partner for Gemstone Color Enhancement, Crosslinking of Plastic, Curing of Composite Materials, Semiconductor Enhancements and Bio-reduction.
PYCO Kantstrasse 55
Herotron operates two electron accelerators (10 MEV and 20 MEV), a one-of-akind sorting machine and a Hi-Res Gamma Spectrometer.
D-14513 Teltow
www.pyco.fraunhofer.de
Torsten Lerz
Besides color enhancement of gemstones Herotron’s capabilities also include
other industrial applications such as:
Phone: +49 3328 330-284
- polymer modification, like cross linking or degradation
Fax: +49 3328 330-282
- enhancement of semiconductors and gemstones
info@pyco.fraunhofer.de
- radiation curing of high performance polymer
At Fraunhofer PYCO a team of scientists is developing highly crosslinked polymers (thermosets) for all applications with particular reference to aviation, as
well as to opto- and microelectronics.
compound materials
Fraunhofer PYCO is developing polymer systems along the whole supply chain,
beginning with monomers up to the finished part.
packing material
Research topics:
Im Biotechnologiepark
- Prepreg resins, prepregs, laminates, sandwiches
D-14943 Luckenwalde
- Adhesives (repairable, flame-retardant, debondable)
www.hesco.de
- Infusion resins, FRPs out of carbon, glass and natural
Klaus Reiche
fibers
Dr. Felix Reiche
© 2014 Messe Düsseldorf GmbH
291
- bioreduction and sterilization of medical devices and
hesco Kunststoffverarbeitung GmbH
© 2014 Messe Düsseldorf GmbH
292
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Phone +49 3371 4058 0
D-13158 Berlin-Wilhelmsruh
Fax +49 3371 4058 130
www.knabe-co.de
hesco@hesco.de
Dipl.-Kfm. Michael Krüger
- Development, design and production of
Manager
thermoplastics
Phone +49 30 45607211
- Assembly production, refining and finishing
Fax +49 30 4564079
IHK Potsdam
michael.krueger@knabe-co.de
Breite Str. 2 a-c
Petra Fleischauer
D-14467 Potsdam
Executive-Assistant
www.potsdam.ihk24.de
Phone +49 30 45607211
Jens Ullmann
Fax +49 30 4564079
Phone +49 331 2786-251
petra.fleischauer@knabe-co.de
Fax +49 331 2786-190
The International department of the Chamber of Commerce and Industry Potsdam is offering foreign trade support, commercial contacts, country information,
fairs and exhibitions, foreign trade services, origin reports, Carnet A.T.A., certificates
Since 1923 Firma Knabe + Co. stands for quality in the die-cutting industry for
all types of plastic and other materials. We offer high-quality die-cutting tools,
as well as the service of die-cutting and waterjet-cutting. Most important to us
is having customers that are content with our service, quality, price and delivery
times. If you are looking for a professional partner for your products, your quest
has come to an end.
Innovative Kunststoffveredelungs GmbH
Kunststoff-Verbund Brandenburg Berlin
GRISUTEN – Str. 13
Schipkauerstr.1
D-14727 Premnitz
D-01987 Schwarzheide
www.ikv-kunststoffe.de
www.kuvbb.de
Petra Baumann
Dr. Hubert Lerche
Phone +49 3386 243193
Phone +49 355 2891 3091
Fax +49 3386 243188
Fax +49 355 2891 3099
pbaumann@pet-innovation.de
info@kuvbb.de
We are manufacturers of black master-batches based on PET and PBT carriers
in different commercial qualities. Our core product range is offering first grade
materials which are above all suited for fine denier / dtex types of polyester fibres
and for mono- and multi-filaments. We are also producing high quality standard
types for less demanding applications.
Networking organisation of plastic producers, processors of plastic and universities and institutes in the plastic area
Knabe + Co. GmbH & Co. KG
D-14712 Rathenow
Lessingstraße 79 – Gebäude C 5
http://www.askania.de
jens.ullmann@potsdam.ihk.de
© 2014 Messe Düsseldorf GmbH
293
Mikroskop Technik Rathenow GmbH
Grünauer Fenn 40
© 2014 Messe Düsseldorf GmbH
294
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Today we process: all reinforced and non-charged thermoplastics, different
types of thermoelastics, all important elastomers as NBR, SBR, EPDM, FPM,
Silicon and HNBR.
Mr. Ralf-Peter Lautenschläger
Phone +49 3385 5371 0
Today we are equipped with: CAD/CAM work stations, tool shop with latest CNC
equipment, department for parts finishing for additional inspection and assembly
steps.
Fax +49 3385 5371 22
info@askania.de
Optics insight. Precision from Rathenow.
The company Mikroskop Technik Rathenow GmbH is your partner at questions
in the field of quality insurance as a manufacturer of modern epi-, stereo- and
laboratory microscopes and their accessories.
The modular design of the microscopes, a wide range of microscopic illuminations (LED, halogen, cold light devices or ringlight illuminators), camera adaptations (photo or tv), different variants of bases and stages and measuring software
programs are characteristic for our product range.
Customized and at project based special solutions are also part of the product
range of the Mikroskop Technik Rathenow GmbH, as well also the maintenance
and service of microscopes. We are authorized Zeiss partner and in this we can
offer the consultant, sales and repair service for newer and older Zeiss microscopes.
The high quality is the result of the long- time affiliation with the state combine
VEB Carl Zeiss Jena and will be documented by the current ISO 9001:2008
certification.
We are successful certified according to ISO/TS 16949:2009, DIN EN ISO
9001:2008 and EMAS III, DIN EN ISO 14001:2009.
Projektron GmbH
Charlottenstr. 68
D-10117 Berlin
www.projektron.de
Berit Krüger
Phone +49 30 3474764-133
Fax +49 30 3474764-999
info@projektron.de
Project management software Projektron BCS
- Planning
- Analysis
Motzener Kunststoff- und Gummiverarbeitung GmbH
- Controlling
Mittenwalder Str. 79
- Reporting
D-15749 Mittenwalde
- Time recording
www.kunststoff-gummi.de
- Documentation
www.plastics-rubber.de
- Resource management
Thomas König
RELUX Kunststofftechnik GmbH & Co. KG
Phone +49 33769 89435
Sülzborn 4
Fax +49 33769 61921
D-39128 Magdeburg
koenig@kunststoff-gummi.de
www.relux-kunststoffe.de
The Motzener Kunststoff- und Gummiverarbeitung GmbH is well known for high
quality, technical injection molded parts and assembly groups manufactured out
of thermoplastic materials and elastomers. Especially the production of injected
O-Rings up to a diameter of 1.500 mm and multi-component parts (plastic and
rubber) are two of our major core competencies.
Norbert Koch
© 2014 Messe Düsseldorf GmbH
295
Phone +49 391 662775-0
Fax +49 391 662775-25
info@relux-umwelt.de
© 2014 Messe Düsseldorf GmbH
296
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Relux is producer of recycled plastics made of HDPE, LDPE and PP. Repro
pellets, regrind and agglomerates for applications like extrusion und injection
moulding.
Technamation Technical Europe GmbH Forster Straße 65 D – 03172 Guben
www.technamation.com
RoweMed AG – Medical 4 Life
Patricia Idilbi
Juri-Gagarin-Ring 4
Managing Director
D-19370 Parchim
Phone +49 3561 68 577 0
www.rowemed.de
Mobil: +49 170 2057 026
Nadia Einnolf Business
Fax +49 3561 68 577 11
Development Manager
E-Mail: info@technamation.com
Phone +49 3871 451 287
Production and manufacture of Wood / Cellulose Plastic Composites (WPC /
CPC) plus production of extrusion and injection molding products made out of
these materials.
Fax +49 3871 451 282
nadia.einnolf@rowemed.de
RoweMed AG is an innovative company specialized in developing and manufacturing medical devices, especially in the field of liquid management for special
hospital departments like intensive care, neonatology, radiology and ambulatory
departments.
Development of techniques and machines for the production of WPC / CPC –
goods.
Vakuplastic Kunststoff GmbH &Co. KG
Rudower Straße 68b
Schweriner Kunststoffkompetenz-zentrum im saz
D-12529 Schönefeld
Ziegeleiweg 7 D-19057 Schwerin
Oliver Schwarz
www.sazev.de
Phone +49 3379 2031-31
Gerd Poloski
Fax +49 3379 2031-39
Phone +49 385 4802-11
info@Vakuplastic.de
Fax +49 385 4802-15
- Injection moulding of plastics
info@sazev.de
- Suction siphon
The Plastics Competence Centre (skk) in Schwerin supports the Education and
Profession qualifying Centre in Schwerin and companies from plastics, electronic and metal technology in terms of professional qualification, human resources and transfer of technology.
- Connection elements
Hearts of the professional qualification are offers of applied education in plastics, electronics and metal technology starting at re-education and finishing at
career qualification (Meister [Foreman]) of IHK (German Chamber of Industry
and Commerce).
xTribo GmbH
The skk (Plastics Competence Centre in Schwerin) offers customised products
in education of plastics at modern machines. The range of education spreads
from laminating to injection moulding and even the whole process from construction via machine operation till handling and quality management.
© 2014 Messe Düsseldorf GmbH
297
- Slide-restraining tootsies
- Technical parts of plastic
Sekr. C8-4, Geb. M
Straße des 17. Juni 135
D-10623 Berlin
www.xtribo.de
Kathrin Müller
© 2014 Messe Düsseldorf GmbH
298
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Phone +49 30 314 21479
- identification of potential for innovation and growth
Fax +49 30 314 21113
- knowledge and technology transfer
kathrin.mueller@xtribo.de
- recruitment and development of a skilled workforce
xTribo has spezialized for innovative tribology engineer performances and
gauges in the field of friction. The basis is the „Method of Dimensionreduction“.
- Interlinking and internationalisation of the players
The original 3D system is replaced by the contact with an elastic or viscoelastic
bedding and thus converted into a 1D system. Through the method is it possible
fast contact calculation without measuring.
- Biopolymeres Lightweight construction and composite
As further innovation we offer the RheoQuick k500. It measures the rheology
qualities fast and reliably. It can be also used as a incomming goods controlling
devices.
- Specialty chemicals
ZukunftsAgentur Brandenburg GmbH
Product Overview
Cluster Plastics and Chemistry
Specific issues of the Cluster
materials
Industrie- und Handelskammer (IHK) Potsdam
02.03.002
Plastics products and parts for automotive
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
04.03
Trade associations
Steinstraße 104 - 106
D-14480 Potsdam
www.kunststoffe-chemie-brandenburg.de
www.brandenburg-invest.com
Kerstin Dohrmann
Cluster Manager Plastics and Chemistry Industry
Phone +49 331 660 3290
Product Details
Industrie- und Handelskammer (IHK) Potsdam
Fax +49 331 660 3222
02.03.002
kerstin.dohrmann@zab-brandenburg.de
ZAB is the Brandenburg economic development board and helps with all questions of industrial settlement, innovation, and technology-orientated start-ups. It
is active in the management of the German capital region’s strong growth clusters.
The Plastics and Chemistry cluster closely connects businesses, research facilities, networks, employers and employees and key players from politics and
administrators.
- roughly 400 companies with 11.600 employees
Plastics products and parts for automotive
Business Services (Automotive)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Business Services (Plastics/Synthetics)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
- unique density of R&D institutions
- foster and support by strong regional and European
Networks
© 2014 Messe Düsseldorf GmbH
299
© 2014 Messe Düsseldorf GmbH
300
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.010
Plastics products and parts for aviation
Industrie- und Handelskammer (IHK) Potsdam
Business services (Aerospace)
Address
Breite Str. 2 A-C
14467 Potsdam
Germany
Phone
+49 331 2786251
Fax
+49 331 2786190
Internet address
www.potsdam.ihk24.de
E-Mail
jens.ullmann@potsdam.ihk.de
Stand
Hall 08b, E61-1 (Page 890)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Business Services (Plastics/Synthetícs)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
02.03.012
Plastics products and parts for medical engineering
Business services (Medical/Life Sciences)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Company News
10/14/2013
Business services (Plastics/Synthetics)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Industrie- und Handelskammer (IHK) Potsdam
„Plastics made in Berlin-Brandenburg” at the world’s
largest International Trade Fair for Plastics and Rubber
in Düsseldorf
Plastics by tradition and future –
Made in Berlin-Brandenburg
Hall 8B, Stand E 61
company, address, website
contact person, phone, fax, email
company profile
BK – Kunststoffe Bernau GmbH
Wandlitzer Chaussee 54
D – 16321 Bernau
www.bernauer-kunststoffe.de
Mr. Grünberg
Manager
© 2014 Messe Düsseldorf GmbH
301
© 2014 Messe Düsseldorf GmbH
302
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Phone +49 3338 393750
Fax: +49 3328 330-282
Fax +49 3338 393718
info@pyco.fraunhofer.de
c.gruenberg@bernauer-kunststoffe.de
At Fraunhofer PYCO a team of scientists is developing highly crosslinked polymers (thermosets) for all applications with particular reference to aviation, as
well as to opto- and microelectronics.
- Laminate manufacturing history in Bernau that goes back
several decades
- Solutions for thermosetting insolation materials in the fields
Fraunhofer PYCO is developing polymer systems along the whole supply chain,
beginning with monomers up to the finished part.
of substrate materials and resin systems since 1994
Research topics:
- Ideal provider for technical composites due to our material
- Prepreg resins, prepregs, laminates, sandwiches
and application expertise
- Adhesives (repairable, flame-retardant, debondable)
- DIN ISO 9001 : 2008 Certification since more than 12
- Infusion resins, FRPs out of carbon, glass and natural fibers
years
- E-Beam curable resins, prepregs, laminates
- International Presence, regional Engagement
- Foams (acoustic, noise damping, flame-retardant, hard and
foxiflex GmbH & Co.KG
soft, lightweight)
Rietzer Berg 11
- New core materials, e.g. nap core
D-14797 Kloster Lehnin, OT Rietz
- Bistable displays for logistics
www.foxiflex.com
Herotron E-Beam Service GmbH
Ms Hiltrud Mütherich
Guardianstrasse 6 - 10
Phone: +49 3381 21121-14
D- 06766 Bitterfeld-Wolfen
Fax: +49 3381 21121-40
OT Thalheim
muetherich@foxiflex.com
www.herotron.de
foxiflex – the hose specialist
Yves Kaufhold
production of highly abrasion resistant hoses for transport of plastic granuleshigh
temperature hoses up to +1.100°C for dryersspecial gas hose for extrusion profilesspecial hoses for transport of glass fibre and PET granulesfrom dia 10 mm
up to 1.000 mmmore than 3.000 products on stocksales network worldwide
Phone +49 3494 6666-0
Fraunhofer Research Institution for Polymeric Materials and Composites PYCO
Reliable partner for Gemstone Color Enhancement, Crosslinking of Plastic, Curing of Composite Materials, Semiconductor Enhancements and Bio-reduction.
Kantstrasse 55
Fax +49 3494 6666-118
info@herotron.com
Herotron operates two electron accelerators (10 MEV and 20 MEV), a one-of-akind sorting machine and a Hi-Res Gamma Spectrometer.
D-14513 Teltow
www.pyco.fraunhofer.de
Torsten Lerz
Besides color enhancement of gemstones Herotron’s capabilities also include
other industrial applications such as:
Phone: +49 3328 330-284
- polymer modification, like cross linking or degradation
© 2014 Messe Düsseldorf GmbH
303
© 2014 Messe Düsseldorf GmbH
304
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- enhancement of semiconductors and gemstones
www.ikv-kunststoffe.de
- radiation curing of high performance polymer compound
Petra Baumann
materials
Phone +49 3386 243193
- bioreduction and sterilization of medical devices and
Fax +49 3386 243188
packing material
pbaumann@pet-innovation.de
hesco Kunststoffverarbeitung GmbH
www.hesco.de
We are manufacturers of black master-batches based on PET and PBT carriers
in different commercial qualities. Our core product range is offering first grade
materials which are above all suited for fine denier / dtex types of polyester fibres
and for mono- and multi-filaments. We are also producing high quality standard
types for less demanding applications.
Klaus Reiche
Knabe + Co. GmbH & Co. KG
Dr. Felix Reiche
Lessingstraße 79 – Gebäude C 5
Phone +49 3371 4058 0
D-13158 Berlin-Wilhelmsruh
Fax +49 3371 4058 130
www.knabe-co.de
hesco@hesco.de
Dipl.-Kfm. Michael Krüger
- Development, design and production of thermoplastics
Manager
- Assembly production, refining and finishing
Phone +49 30 45607211
IHK Potsdam
Fax +49 30 4564079
Breite Str. 2 a-c
michael.krueger@knabe-co.de
D-14467 Potsdam
Petra Fleischauer
www.potsdam.ihk24.de
Executive-Assistant
Jens Ullmann
Phone +49 30 45607211
Phone +49 331 2786-251
Fax +49 30 4564079
Fax +49 331 2786-190
petra.fleischauer@knabe-co.de
jens.ullmann@potsdam.ihk.de
Since 1923 Firma Knabe + Co. stands for quality in the die-cutting industry for
all types of plastic and other materials. We offer high-quality die-cutting tools,
as well as the service of die-cutting and waterjet-cutting. Most important to us
is having customers that are content with our service, quality, price and delivery
times. If you are looking for a professional partner for your products, your quest
has come to an end.
Im Biotechnologiepark
D-14943 Luckenwalde
The International department of the Chamber of Commerce and Industry Potsdam is offering foreign trade support, commercial contacts, country information,
fairs and exhibitions, foreign trade services, origin reports, Carnet A.T.A., certificates
Innovative Kunststoffveredelungs GmbH
Kunststoff-Verbund Brandenburg Berlin
GRISUTEN – Str. 13
Schipkauerstr.1
D-14727 Premnitz
© 2014 Messe Düsseldorf GmbH
D-01987 Schwarzheide
305
© 2014 Messe Düsseldorf GmbH
306
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
www.kuvbb.de
D-15749 Mittenwalde
Dr. Hubert Lerche
www.kunststoff-gummi.de
Phone +49 355 2891 3091
www.plastics-rubber.de
Fax +49 355 2891 3099
Thomas König
info@kuvbb.de
Networking organisation of plastic producers, processors of plastic and universities and institutes in the plastic area
Phone +49 33769 89435
Fax +49 33769 61921
Mikroskop Technik Rathenow GmbH
koenig@kunststoff-gummi.de
Grünauer Fenn 40
Mr. Ralf-Peter Lautenschläger
The Motzener Kunststoff- und Gummiverarbeitung GmbH is well known for high
quality, technical injection molded parts and assembly groups manufactured out
of thermoplastic materials and elastomers. Especially the production of injected
O-Rings up to a diameter of 1.500 mm and multi-component parts (plastic and
rubber) are two of our major core competencies.
Phone +49 3385 5371 0
Today we process:
Fax +49 3385 5371 22
all reinforced and non-charged thermoplastics, different types of thermoelastics,
all important elastomers as NBR, SBR, EPDM, FPM, Silicon and HNBR.
D-14712 Rathenow
http://www.askania.de
info@askania.de
Today we are equipped with:
Optics insight.
Precision from Rathenow.
CAD/CAM work stations, tool shop with latest CNC equipment, department for
parts finishing for additional inspection and assembly steps.
The company Mikroskop Technik Rathenow GmbH is your partner at questions
in the field of quality insurance as a manufacturer of modern epi-, stereo- and
laboratory microscopes and their accessories.
We are successful certified according to ISO/TS 16949:2009, DIN EN ISO
9001:2008 and EMAS III, DIN EN ISO 14001:2009.
The modular design of the microscopes, a wide range of microscopic illuminations (LED, halogen, cold light devices or ringlight illuminators), camera adaptations (photo or tv), different variants of bases and stages and measuring software
programs are characteristic for our product range.
Customized and at project based special solutions are also part of the product
range of the Mikroskop Technik Rathenow GmbH, as well also the maintenance
and service of microscopes.
Projektron GmbH
Charlottenstr. 68
D-10117 Berlin
www.projektron.de
Berit Krüger
Phone +49 30 3474764-133
We are authorized Zeiss partner and in this we can offer the consultant, sales
and repair service for newer and older Zeiss microscopes.
Fax +49 30 3474764-999
The high quality is the result of the long- time affiliation with the state combine
VEB Carl Zeiss Jena and will be documented by the current ISO 9001:2008
certification.
Project management software Projektron BCS
Motzener Kunststoff- und Gummiverarbeitung GmbH
- Analysis
Mittenwalder Str. 79
- Controlling
© 2014 Messe Düsseldorf GmbH
307
info@projektron.de
- Planning
© 2014 Messe Düsseldorf GmbH
308
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- Reporting
www.sazev.de
- Time recording
Gerd Poloski
- Documentation
Phone +49 385 4802-11
- Resource management
Fax +49 385 4802-15
RELUX Kunststofftechnik
info@sazev.de
GmbH & Co. KG
The Plastics Competence Centre (skk) in Schwerin supports the Education and
Profession qualifying Centre in Schwerin and companies from plastics, electronic and metal technology in terms of professional qualification, human resources and transfer of technology.
Sülzborn 4
D-39128 Magdeburg
www.relux-kunststoffe.de
Hearts of the professional qualification are offers of applied education in plastics, electronics and metal technology starting at re-education and finishing at
career qualification (Meister [Foreman]) of IHK (German Chamber of Industry
and Commerce).
Norbert Koch
Phone +49 391 662775-0
Fax +49 391 662775-25
info@relux-umwelt.de
Relux is producer of recycled plastics made of HDPE, LDPE and PP. Repro
pellets, regrind and agglomerates for applications like extrusion und injection
moulding.
The skk (Plastics Competence Centre in Schwerin) offers customised products
in education of plastics at modern machines. The range of education spreads
from laminating to injection moulding and even the whole process from construction via machine operation till handling and quality management.
Technamation Technical Europe GmbH
RoweMed AG – Medical 4 Life
Forster Straße 65
Juri-Gagarin-Ring 4
D – 03172 Guben
D-19370 Parchim
www.technamation.com
www.rowemed.de
Patricia Idilbi
Nadia Einnolf
Managing Director
Business Development Manager
Phone +49 3561 68 577 0
Phone +49 3871 451 287
Mobil: +49 170 2057 026
Fax +49 3871 451 282
Fax +49 3561 68 577 11
nadia.einnolf@rowemed.de
E-Mail: info@technamation.com
RoweMed AG is an innovative company specialized in developing and manufacturing medical devices, especially in the field of liquid management for special
hospital departments like intensive care, neonatology, radiology and ambulatory
departments.
Production and manufacture of Wood / Cellulose Plastic Composites (WPC /
CPC) plus production of extrusion and injection molding products made out of
these materials.
Schweriner Kunststoffkompetenz-zentrum im saz
Development of techniques and machines for the production of WPC / CPC –
goods.
Ziegeleiweg 7
Vakuplastic Kunststoff GmbH &Co. KG
D-19057 Schwerin
Rudower Straße 68b
© 2014 Messe Düsseldorf GmbH
309
© 2014 Messe Düsseldorf GmbH
310
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
D-12529 Schönefeld
www.brandenburg-invest.com
Oliver Schwarz
Kerstin Dohrmann
Phone +49 3379 2031-31
Cluster Manager Plastics and Chemistry
Fax +49 3379 2031-39
Industry
info@Vakuplastic.de
Phone +49 331 660 3290
- Injection moulding of plastics
Fax +49 331 660 3222
- Suction siphon
kerstin.dohrmann@zab-brandenburg.de
- Connection elements
ZAB is the Brandenburg economic development board and helps with all questions of industrial settlement, innovation, and technology-orientated start-ups. It
is active in the management of the German capital region’s strong growth clusters.
- Slide-restraining tootsies
- Technical parts of plastic
xTribo GmbH
The Plastics and Chemistry cluster closely connects businesses, research facilities, networks, employers and employees and key players from politics and
administrators.
Sekr. C8-4, Geb. M
Straße des 17. Juni 135
- roughly 400 companies with 11.600 employees
D-10623 Berlin
- unique density of R&D institutions
www.xtribo.de
- foster and support by strong regional and European
Kathrin Müller
Networks
Phone +49 30 314 21479
- identification of potential for innovation and growth
Fax +49 30 314 21113
- knowledge and technology transfer
kathrin.mueller@xtribo.de
xTribo has spezialized for innovative tribology engineer performances and
gauges in the field of friction. The basis is the „Method of Dimensionreduction“.
The original 3D system is replaced by the contact with an elastic or viscoelastic
bedding and thus converted into a 1D system. Through the method is it possible
fast contact calculation without measuring.
As further innovation we offer the RheoQuick k500. It measures the rheology
qualities fast and reliably. It can be also used as a incomming goods controlling
devices.
ZukunftsAgentur Brandenburg GmbH
- recruitment and development of a skilled workforce
- Interlinking and internationalisation of the players
Specific issues of the Cluster
- Biopolymeres Lightweight construction and composite
materialsSpecialty chemicals
10/14/2013
„Plastics made in Berlin-Brandenburg” at the world’s
largest International Trade Fair for Plastics and Rubber
in Düsseldorf
Cluster Plastics and Chemistry
Potsdam/Düsseldorf, 15. October 2013 - The German
Capital Region with 30 exhibitors (18 Brandenburg,
12 Berlin) marks a participation record at the world’s
largest International Trade Fair for Plastics and Rubber “K 2013”. For the third
consecutive time the German Capital Region Berlin-Brandenburg will participate
Steinstraße 104 - 106
D-14480 Potsdam
www.kunststoffe-chemie-brandenburg.de
© 2014 Messe Düsseldorf GmbH
311
© 2014 Messe Düsseldorf GmbH
312
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
with its own pavilion at the Trade Fair “K 2013” taking place in Düsseldorf from
October 16th – 23rd 2013. Following the motto “Plastics by tradition and future
– Made in Berlin-Brandenburg” 21 exhibitors from Berlin-Brandenburg will be
present at the collective pavilion organized by the Potsdam Chamber of Commerce and Industry (IHK Potsdam) in hall 8b stand E 61. Altogether it is a record
breaking participation of 30 exhibitors from the German Capital Region BerlinBrandenburg.
The following exhibitors are participating for the first time at the Berlin-Brandenburg
Pavilion: foxiflex GmbH & Co. KG, Kloster Lehnin (flexible recoil hoses to
feed plastic granulate and fiberglass reinforced plastics), Fraunhofer-PYCO, Teltow (development of polymers and composites; actual focal point at “K 2013”:
new nano materials), Mikroskoptechnik Rathenow GmbH (high-precision optical measurement and testing equipment), Märkische Faser GmbH, Premnitz (polyester and polyester fibres), Projektron GmbH, Berlin (software solutions for the plastics and rubber industry), Technamation Technical Europe
GmbH, Guben (bio polymers NATUREGRAN, composite EXTRUFIB) as well as
the Technische Universität Berlin/Technical University Berlin (Mobile ExpressRheometer: new mobile measurement method for plastics material characteristics).
Brandenburg has developed into a major hub for the European chemistry and
synthetics industries. With around 400 companies, 11,600 employees and a
turnover of more than €3 billion in the 2011 fiscal year, this cluster is a solid pillar
of the region’s industrial landscape and belongs to one of the ten most important
growth and export sectors. The cluster management is run by the ZukunftsAgentur Brandenburg (ZAB). Hardly any other economic sector in Brandenburg enjoys such close ties with other industries. The range of products stretches from
high-quality car paint that is used all over the world to innovative machine parts
and system components for the aerospace industry.
Product Overview
Industrie- und Handelskammer (IHK) Potsdam
02.03.002
Plastics products and parts for automotive
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
04.03
Trade associations
Product Details
02.03.002
Industrie- und Handelskammer (IHK) Potsdam
Plastics products and parts for automotive
Business Services (Automotive)
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Business Services (Plastics/Synthetics)
Business contacts, suppliers, subcontracting directory, import, export and cooperation services, economic development
02.03.010
Plastics products and parts for aviation
Additional information “K”
Business services (Aerospace)
The International Trade Fair for Plastics and Rubber “K” is taking place every
third year in Düsseldorf. With more than 3,100 exhibitors from 56 countries
the show is providing a comprehensive overview on machines and equipment,
materials and ready-made products from plastics and rubber. The organizer
Messe Düsseldorf is expecting more than 220,000 visitors from all over the world
this year.
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Contact:
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Jens Ullmann, Director International Trade, IHK Potsdam, mobile: +49 (0) 176
12786251,
Business Services (Plastics/Synthetícs)
E-Mail: jens.ullmann@potsdam.ihk.de
© 2014 Messe Düsseldorf GmbH
313
© 2014 Messe Düsseldorf GmbH
314
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
– 30.40 PL-SW Stumpf-Schweißmaschine Vollausstattung & 90° Schweiß-Vorrichtung
– 08.06 S-KLT Universal-Boxen-Schweißmaschine
Business services (Medical/Life Sciences)
– 1.0 X-PV Universal- & Profil-Schweißmaschine
– Diverse Tisch-Heizelemente
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
Business services (Plastics/Synthetics)
Product Overview
Business contacts, suppliers, subcontracting directory,
import, export and cooperation services, economic development
02.02.005
Welding
02.02.006
Embossing
03.03.001
Thermoforming machines
03.03.002
Bending, folding and edgetrimming machines
03.05.001
Hot-plate welding machines
03.05.004
Ultrasonic welding machines
03.05.005
Hot gas welding machines
03.05.007
Extrusion welding machines
INGENIA GmbH
Address
Phone
Fax
Hauptstr. 72
56858 Altlay
Germany
INGENIA GmbH
+49 6543 5049-0
+49 6543 5049-29
Internet address
www.ingenia-gmbh.de
E-Mail
sk@ingenia-gmbh.de
Stand
Hall 11, E63 (Page 902)
Product Details
Company News
19.08.2013
02.02.005
Welding
Butt welding machines for beginners - Model: S
easy
INGENIA GmbH
Butt welding machines for beginners - Model: S easy
The Model S easy is designed for easy use for beginners. The control of the machine in done via an integrated Moeller PLC. The input of the welding times is
manually done via the dasborad on display. All times set by the operator can
be extended or shortened during the welding process by pressing keys. The
Messe-Exponate INGENIA GmbH auf der K-2013
© 2014 Messe Düsseldorf GmbH
INGENIA GmbH
315
© 2014 Messe Düsseldorf GmbH
316
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
setting of the bead-/ heating and joining force is manually done via a pressure
control valve. The welding cycle runs automatically.
Semi Automatic Butt Welding Machine - Modell: S
econo
This machine is available in the following versions:
Semi-automatic butt welding machines - Model: S
econo
1m, 2m, 3m and 4m or Customized
Weldable material thickness: 3 - 20mm
CNC Butt welding machines - model P-SW
Fully-automatic butt welding machines - Model: P-SW
The model P-SW is designed for the highest standards
of quality and performance. This version comes standard with two clamping ranges for each side of the table.
Machines of this series are equipped with a CNC table
force control, including database and can according to the customer with a fully
automatic 90 ° welding device are provided.
The welding cycle of this machine is fully automatic.
The Model S econo is designed for the middle range.
The control of the machine in controlled via an integrated PLC. All times set by the operator can be extended or shortened during the welding process by pressing keys. The setting
of the bead-/ heating and joining force is manually selected via a pressure control valve. The welding cycle runs automatically. By default, this series has a
clamping area per side of the table.
Optionally this equipment may inter alia be equipped with a semi-automatic 90
° L-welding device.
This machine is available in the following versions:
2m, 3m and 4m or Customized
Weldable material thickness: 25mm 3
This machine is available in the following versions:
2m, 3m, 4m, 5m or 6m
Manual - welding machines - Model: S Hand
Weldable material thickness: 60mm 3
Special solutions on customer request
Manual - welding machines - Model: S Hand
Surface welding machines
The manual hand welding machine is an ideal starter
model or for portable needs. The welding cycle is carried out by hand. This machine is available with an optional manual 90 ° L-welding device.
INGENIA surfaces welding machines, Model Y-P -SF
are sturdy allround machines for the welding of large
components in a horizontal arrangement . The weld
cycle is fully automatic , identifying the main welding parameters via a host computer. The minimum working surface area is 650mm x 650mm (Model 0 6:06
Y-P -SF ), the maximum surface are is 1650mm x1050mm ( 16:10 Model Y-P
-SF) .
The machine is suitable for processing more or less all common thermoplastic
materials.
This machine is available in the following versions:
Working width of 1.50 m up to 20mm thickness
Working width of 2.0 m up to 12mm thickness
02.02.006
Embossing
Loading flap production unit
INGENIA loading flap hinge-forming machines are flexible and indepentetly working machines to be integrated
in to a full production line.
The hinge forming machine is used to make a loading &
unloading flap on too a foldable hollow sheet boxes.
© 2014 Messe Düsseldorf GmbH
317
© 2014 Messe Düsseldorf GmbH
318
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Multible hinge forming systems
Company News
MACHINES FOR PACKAGING INDUSTRY
10/09/2013
INGENIA RA-x Hinge-forming machines are flexible
hinge independently operating machines for integration
into a production line.
RA-x hinge-forming machines are used for production
of 2/3/4/6 hinges in one cycle. Machines with 2/3 stations are used for twopart production of foldable boxes made of extruded hollow sheets with chamber
structure. Machines with 4/6 stations are used for the processing of long tables
that allow you to produce a one-piece ring with a weld
Planckstr. 15
32052 Herford
Germany
Phone
+49 5221 777-0
Fax
+49 5221 777-500
Internet address
www.inometa.de
E-Mail
info@inometa.de
Stand
Hall 04, C35 (Page 870)
Corona - New Application Aspects
Corona treatment has proved to be a reliable process which does not require any chemical additives.
However, the rollers in use have to fulfill special requirements as they are subject to severe stress during application. Inometa, the Herford-based specialist
for rollers, has developed the new PROTEK layer for
corona treatment, which combines the functional safety of a rubber coating with
the wear advantages of a ceramic coating, thus creating a roller surface that
meets the high stress requirements.
Plastics have an insulating and water-repellent surface. The application of paint,
adhesives or bonding agents requires surface treatment. One way to improve
wettability is corona treatment, in which the structure, e.g. of plastic films made
of polypropylene, is changed from non-polar to polar using corona discharge.
INOMETA GmbH & Co. KG
Address
INOMETA GmbH & Co. KG
The ever-increasing demands on corona rollers can only be partially met by
conventional rollers. Ozone resistance, perfect electrical insulation, dielectric
strength, excellent uniformity, long service life - grounded metal rollers can only
meet part of the requirements, the same applies to steel rollers with rubber or
silicone coating. The most common problems are premature wear of the roller
surface, or even cracks in the coating, leading to breakdowns and thus undesirable costs.
The new PROTEK corona coating offers Inometa customers long-lasting costsaving benefits. ”As a roller specialist, we are familiar with the issue of
lightweight as well as with the continuous development and production of
application-oriented high-performance coatings,” explains Stephan Palenga,
Sales Manager at Inometa. ”We are pleased to offer a new and highly performant layer system for use on irradiation rollers and thus to help our customers
improve their performance.”
Assured quality:Every single functional roller produced by Inometa is submitted
to a strict final inspection. This includes, among other things, a professional
measurement of dielectric strength.
Inometa will present corona coating at this year’s K Trade Fair for Plastics in
Düsseldorf (stand C 35 in hall 4).
© 2014 Messe Düsseldorf GmbH
319
© 2014 Messe Düsseldorf GmbH
320
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
INOMETA GmbH & Co. KG
01.14.024
Composite materials
02.03.001
Plastics products and parts for plant building
02.03.011
Plastics products and parts for mechanical engineering
02.03.015
Plastics products and parts for transport/packaging
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
xperion / Inometa entwickelt und produziert maßgeschneiderte Bauteile aus Faserverbundwerkstoffen (FVK) für den Einsatz im Maschinenbau. Wo herkömmliche
Materialien wie Stahl oder Aluminium an die Grenzen der Physik und des technisch Machbaren stoßen, bietet der Einsatz von FVK enormes Potenzial für
High-End-Lösungen und Innovationen.
xperion / Inometa ist als Pionier in der industriellen Nutzung von faserverstärkten
Kunststoffen heute Experte und Technologieführer für die Herstellung von Zugoder Druckstreben, Strukturen, Hebeln, Balken, Wellen oder anderen Bauteilen,
die unter definierten Rahmenbedingungen eine bestimmte Performance zu erbringen haben. Dabei bietet xperion / Inometa von der Ideenfindung bis hin zur
Serienfertigung alle Schritte des Entwicklungs- und Produktionsprozesses aus
einer Hand.
02.03.011
Plastics products and parts for mechanical engineering
Kunststoffwaren und –teile für den Maschinenbau
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.05.069
Parts of industrial laminates
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.075.02
Other fibre-reinforced plastic parts
02.05.076
Rollers and roller coatings
03.09.002.03
Measuring equipment for tensile stress of film,sheet
03.10.002
Barrels
03.10.003
Rolls
Product Details
02.03.001
INNOVATIONEN NACH MASS
xperion / Inometa entwickelt und fertigt maßgeschneiderte Bauteile und Komponenten aus Faserverbundwerkstoffen (FVK) für den Einsatz im Maschinenbau.
Verbunden mit den einzigartigen Werkstoffvorteilen, die nur FVK liefern kann,
lassen sich unsere Produkte gezielt auf die geforderte Anwendung einstellen
und bieten ein hohes Innovationspotenzial. Die breite Palette an individualisierbaren Maschinenelementen vereinfacht deren Entwicklung und ermöglicht eine
schnelle Umsetzung zur Verbesserung von Dynamik und Präzision.
Weitere sinnvolle Beispiele aus dem Werkzeugmaschinenbau umfassen Werkzeuglösungen, z. B. eine Werkzeugverlängerung mittels CFK zur Feinbearbeitung
tiefer Bohrungen. Wichtige Kriterien für die Werkzeugauslegung sind dabei das
zulässige Werkzeuggewicht und das Kippmoment.
Im Textilmaschinenbau werden Spindeln u. a. als rotierendes Maschinenteil an
Spinn- und Zwirnmaschinen zur Garn-, Zwirn- oder Kunstfaserherstellung eingesetzt. Die hohe spezifische Steifigkeit von CFK und die sehr niedrige Massenträgheit erlauben hier Geschwindigkeitssteigerungen bzw. eine verbesserte Performance der Produktion bei einem mechanisch ansonsten vergleichsweise geringen Lastniveau.
INOMETA GmbH & Co. KG
02.03.015
Plastics products and parts for transport/packaging
Kunststoffwaren und –teile für Transport/Verpackungstechnik
Plastics products and parts for plant building
Kunststoffwaren und –teile
HOCHLEISTUNGSPRODUKTE AUS CFK
FASERVERBUNDWERKSTOFFE – MASSANFERTIGUNG FÜR DEN MASCHINENBAU
Immer höhere Maschinengeschwindigkeiten und breitere Warenbahnen sind mit
herkömmlichen Walzen aus Stahl und Aluminium kaum zu bewältigen. Der moderne Design-Werkstoff CFK ist daher bei Inometa „State of the Art” für Rohre,
© 2014 Messe Düsseldorf GmbH
321
© 2014 Messe Düsseldorf GmbH
322
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Profile , Walzen und Druckzylinder, die besonders anspruchsvollen Anforderungen genügen müssen. Das Verhältnis von Steifigkeit zu Gewicht ist bei diesem
Material um ein Vielfaches höher als bei Aluminium oder Stahl. Die kritische
Drehzahl eines Rotationskörpers kann angehoben, seine Durchbiegung und
sein Massenträgheitsmoment können verringert werden.
Ein ideales Verfahren zur Herstellung von Faserverbundrohren ist das sogenannte „Filament Winding”. Die Wickellage für jede Wicklung wird von uns individuell gewählt. Die richtungsabhängigen Steifigkeiten werden optimal kombiniert um die bestmöglichen mechanischen Eigenschaften des CFK-Bauteiles
herzustellen.
THERMISCHE BESCHICHTUNGEN FÜR WALZEN, ZYLINDER UND PROFILE
Der Einsatz von Walzen aus Stahl, Aluminium oder Faserverbundwerkstoffen
in Hochleistungsmaschinen stellt extreme Anforderungen an Oberflächen. Inometa entwickelt und fertigt maßgeschneiderte Beschichtungen für unterschiedlichste industrielle Anwendungen. Je nach Bedarf werden hierzu Werkstoffe wie
Keramik, Metall, Hartmetall oder Hochleistungskunststoffe in kontrollierten Prozessen
verarbeitet. Mit höchster Flexibilität werden so Beschichtungslösungen für individuelle Anforderungen hergestellt.
Dauerhafte Antihafteigenschaften, elektrische oder thermische Isolation bzw.
Leitfähigkeit, Traktion oder Gleiteigenschaften sowie Korrosion und Verschleißbeständigkeit
sind Eigenschaften, die dauerhaft Ihre Prozesse optimieren und sichern und
somit spürbar Produktionskosten senken. Unsere beispielhafte Entwicklungskompetenz, besonders in der Beschichtung von Advanced Composites (CFK/GFK),
sichert unseren Kunden einen stetigen Wettbewerbsvorteil und schafft neue industrielle Standards.
WINCORE®-WICKELHÜLSEN
Unser WinCore®-Wickelhülsen-System aus Aluminium, Composite, Stahl oder
Kunststoff ist speziell auf unterschiedliche Papier-, Karton-, Tissue- oder FolienQualitäten ausgelegt und hält hohen Drehzahlen stand. Die Wickelhülsen werden exakt auf die Herstellung des jeweiligen Materials und auf die unterschiedlichsten Veredelungsprozesse abgestimmt.
Mit der optionalen RFID-Lösung bieten wir wiederverwendbare Wickelhülsen
aus Metall mit integriertem RFID-Chip an, mit denen sich große Kostenvorteile
entlang der gesamten Wertschöpfungskette ergeben. Die Wickelhülsen unterstützen automatisierte und integrierte Logistikprozesse. Der Materialfluss kann
kontinuierlich in Echtzeit verfolgt werden.
02.04.001.13
Semi-finished parts/products
reinforced plastics
made
from
fibre-
Halbzeuge aus Faserverstärkten Kunststoffen
WALZEN UND ZYLINDER
Das Konstruktionselement Rolle, einseitig oder beidseitig gelagert, angetrieben
oder passiv mitgenommen, unter axialer wie radialer oder Kontaktbelastung und
anderen Ausführungen, findet vielfältigen Einsatz im Maschinenbau.
Unsere CFK-Walzen macht sich die Gestaltungsfreiräume unserer Faserverbundwerkstoffe zu eigen, um damit einzigartige Performance-Parameter zu erreichen bzw. auch zu kombinieren, wie z. B. Thermostabilität und niedrigste Massenträgheit für hochpräzise und hochdynamische Anforderungen oder
hochsteife und hochgedämpfte Ausführungen für minimale Verformungen unter
Last bei minimalen Schwingungsniveaus.
SPINDELN UND ACHSEN
In verschiedenen Anwendungen von Spindeln im Maschinenbau kann man die
vorteilhaften Werkstoffeigenschaften eines Kohlefaserverbundmaterials in leistungsfähige Bauteilparameter umsetzen. So kann beispielsweise die Hauptspindel eines Bohrwerks durch die erhöhte Biegeeigenfrequenz mit nur noch
zwei statt drei Lagerstellen ausgeführt werden. Unter dem Produktnamen XSPIN vermarktet, profitieren derartige Ausführungen auch von der hohen Dämpfung und dem insgesamt sehr niedrigen Schwingungsniveau des CFK.
Weitere sinnvolle Beispiele aus dem Werkzeugmaschinenbau umfassen Werkzeuglösungen, z. B. eine Werkzeugverlängerung mittels CFK zur Feinbearbeitung
tiefer Bohrungen. Wichtige Kriterien für die Werkzeugauslegung sind dabei das
zulässige Werkzeuggewicht und das Kippmoment.
Im Textilmaschinenbau werden Spindeln u. a. als rotierendes Maschinenteil an
Spinn- und Zwirnmaschinen zur Garn-, Zwirn- oder Kunstfaserherstellung eingesetzt. Die hohe spezifische Steifigkeit von CFK und die sehr niedrige Massenträgheit erlauben hier Geschwindigkeitssteigerungen bzw. eine verbesserte Performance der Produktion bei einem mechanisch ansonsten vergleichsweise geringen Lastniveau.
STREBEN UND STRUKTUREN
Unsere X-RODs sind Zug- oder Druckstreben aus FVK auf Basis unserer XTUBE.
Fachwerkstrukturen, aufgebaut aus unseren X-ROD-Zug- und
-Druckstreben, bei denen die Einzelelemente keine nennenswerten Momente
aufzunehmen haben, bezeichnen wir als X-GRID.
© 2014 Messe Düsseldorf GmbH
323
© 2014 Messe Düsseldorf GmbH
324
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Wir fertigen auf Wunsch komplette, einbaufertige Komponenten und Systeme
oder aber halbfertige und für eine weitere Verarbeitung bestimmte Produkte.
02.04.001.14
other and machined semi finished products / Pre-cut
parts
somit spürbar Produktionskosten senken. Unsere beispielhafte Entwicklungskompetenz, besonders in der Beschichtung von Advanced Composites (CFK/GFK),
sichert unseren Kunden einen stetigen Wettbewerbsvorteil und schafft neue industrielle Standards.
WINCORE®-WICKELHÜLSEN
sonstige und bearbeitete Halbzeuge / Zuschnitte
HIGHTECH-WALZENROHRE AUS ALUMINIUM UND CFK FÜR EFFIZIENTE
PROZESSE
Die Hightech-Walzenrohre von Inometa überzeugen durch enge Toleranzen,
hohe Rundlaufgenauigkeit und eine Just-in-time-Lieferung. Der Vorteil für unsere Kunden: Eine effiziente Produktion durch optimierte Fertigungsabläufe.
Verfügbar sind die Inometa-Walzenrohre in den Werkstoffen Aluminium, CFK
und Stahl. Inometa liefert alle Walzenrohre auf Fixmaß, passgenau für die
vorgesehene Anwendung.
PROFILROHRE
Profilrohre von Inometa kommen als Gehäuse-Rohre für Motoren und Getriebe
sowie im Automotive-Bereich zum Einsatz. Alle Ausführungen werden in Aluminium gefertigt und entsprechen exakt definierten Qualitätsmerkmalen.
Unser WinCore®-Wickelhülsen-System aus Aluminium, Composite, Stahl oder
Kunststoff ist speziell auf unterschiedliche Papier-, Karton-, Tissue- oder FolienQualitäten ausgelegt und hält hohen Drehzahlen stand. Die Wickelhülsen werden exakt auf die Herstellung des jeweiligen Materials und auf die unterschiedlichsten Veredelungsprozesse abgestimmt.
Mit der optionalen RFID-Lösung bieten wir wiederverwendbare Wickelhülsen
aus Metall mit integriertem RFID-Chip an, mit denen sich große Kostenvorteile
entlang der gesamten Wertschöpfungskette ergeben. Die Wickelhülsen unterstützen automatisierte und integrierte Logistikprozesse. Der Materialfluss kann
kontinuierlich in Echtzeit verfolgt werden.
02.05.069
Parts of industrial laminates
Teile aus Hochleistungsverbundwerkstoffen
KLASSISCHE UND INDIVIDUELLE PROFILE
FASERVERBUNDWERKSTOFFE – MASSANFERTIGUNG FUER HOCHLEISTUNG
Eine Auswahl wichtigster Standard-Profilrohre hält Inometa stets vorrätig, individuelle Profilrohre können nach Kundenzeichnung speziell gefertigt und auf
Wunsch auch in kleinen Losgrößen produziert werden. Gerne ist Inometa bei
der Definition der erforderlichen Spezifikationen behilflich und überprüft schon
im Planungsprozess die fertigungstechnische Machbarkeit.
xperion / Inometa entwickelt und produziert maßgeschneiderte Bauteile aus Faserverbundwerkstoffen (FVK) für den Einsatz im Maschinenbau, Luftfahrt und Energietechnik. Wo herkömmliche Materialien wie Stahl oder Aluminium an die Grenzen der Physik und des technisch Machbaren stoßen, bietet der Einsatz von
FVK enormes Potenzial für High-End-Lösungen und Innovationen.
Soweit erforderlich, bevorratet Inometa nach Bedarf entsprechende Profilrohre
und liefert auf Abruf, in Fixlängen und auch in kleinen Stückzahlen.
Das breite Anwendungsspektrum von Faserverbundwerkstoffen erforschen wir
mit einer eigenen Entwicklungsabteilung, die eng mit führenden Hochschulinstituten und Forschungsträgern auf dem Gebiet der Faserverbundtechnologie
sowie den angrenzenden Wissensbereichen Textiltechnologie und Maschinendynamik zusammenarbeitet. So können Sie sich jederzeit darauf verlassen,
dass unsere Werkstoffkenntnisse auf der Höhe der Zeit sind. Und manchmal
sogar der Zeit voraus.
THERMISCHE BESCHICHTUNGEN FÜR WALZEN, ZYLINDER UND PROFILE
Der Einsatz von Walzen aus Stahl, Aluminium oder Faserverbundwerkstoffen
in Hochleistungsmaschinen stellt extreme Anforderungen an Oberflächen. Inometa entwickelt und fertigt maßgeschneiderte Beschichtungen für unterschiedlichste industrielle Anwendungen. Je nach Bedarf werden hierzu Werkstoffe wie
Keramik, Metall, Hartmetall oder Hochleistungskunststoffe in kontrollierten Prozessen
verarbeitet. Mit höchster Flexibilität werden so Beschichtungslösungen für individuelle Anforderungen hergestellt.
Dauerhafte Antihafteigenschaften, elektrische oder thermische Isolation bzw.
Leitfähigkeit, Traktion oder Gleiteigenschaften sowie Korrosion und Verschleißbeständigkeit
sind Eigenschaften, die dauerhaft Ihre Prozesse optimieren und sichern und
© 2014 Messe Düsseldorf GmbH
325
MODERNSTE BESCHICHTUNGSVERFAHREN FÜR GLEICH BLEIBENDE QUALITÄT DER OBERFLÄCHE
Inometa setzt für den Beschichtungsprozess die Technologie
des thermischen Spritzens ein. Da mit dieser Technologie eine Vielzahl von
Werkstoffen verwendet werden kann, ist sie anderen Beschichtungsverfahren
überlegen. Je nach Anwendung können Schichten aus Metall, Hartmetall und
© 2014 Messe Düsseldorf GmbH
326
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Keramik oder aber auch Kombinationen mit Kunststoffen aufgebracht und an
die individuellen Anforderungen angepasst werden.
Ergänzend dazu hat Inometa ein Gießwickelverfahren für einen spannungsfreien Auftrag von Composite-Beschichtungen entwickelt. Die rasante Entwicklung im Bereich von Thermoplasten und Duroplasten eröffnet uns immer neue
Möglichkeiten bei der Werkstoffauswahl. Diffusionsdichte Schichten mit hoher Chemikalienbeständigkeit bei hoher Zähigkeit sind nur ein Beispiel für die
vielfältigen Möglichkeiten. Zusammen mit keramischen oder anderen verschleißfesten
Füllstoffen ergeben sich Composite-Beschichtungen mit hervorragender Abriebbeständigkeit.
und Produktivität. Wir fertigen nach dem Baukastensystem mit vorproduzierten
Komponenten. Damit sichern wir Wettbewerbsfähigkeit, gleichbleibende Qualität,
Der moderne Design-Werkstoff CFK ist daher bei Inometa „State of the Art” für
Walzen, die besonders anspruchsvollen Anforderungen genügen müssen. Das
Verhältnis von Steifigkeit zu Gewicht ist bei diesem Material um ein Vielfaches
höher als bei Aluminium oder Stahl. Die kritische Drehzahl eines Rotationskörpers kann angehoben, seine Durchbiegung und sein Massenträgheitsmoment
können verringert werden.
INTELLIGENTE, FUNKTIONELLE BESCHICHTUNGEN
02.05.075.01
Fibreglass-reinforced plastic parts
Glasfaserverstärkte Kunststoffteile
INOflex® MONTAGE-SLEEVES, PNEUMATISCHE ADAPTER – GARANT FÜR
FORMSTABILITÄT UND RUNDLAUFGENAUIGKEIT
Inometa Montage-Sleeves und Formatadapter sind ein Garant für Formstabilität, Rundlaufgenauigkeit und optimale Produktivität. Sie können mit allen marktüblichen pneumatischen und hydraulischen Format-Adaptersystemen kombiniert
werden.
Inometa Flexo Systems liefert Montagehülsen, bei deren Herstellung modernste
Verbundfasertechnologien ihren Einsatz finden. Aufgebaut werden die Sleeves
auf einer Basishülse mit perfekten Klemmeigenschaften, die über die gesamte
Lebensdauer hinweg anhalten.
02.05.075.02
Other fibre-reinforced plastic parts
Der Einsatz von Walzen aus Stahl, Aluminium oder Faserverbundwerkstoffen
in Hochleistungsmaschinen stellt extreme Anforderungen an Oberflächen. Inometa entwickelt und fertigt maßgeschneiderte Beschichtungen für unterschiedlichste industrielle Anwendungen. Je nach Bedarf, werden hierzu Werkstoffe wie
Keramik, Metall, Hartmetall oder Hochleistungskunststoffe in kontrollierten Prozessen
verarbeitet. Mit höchster Flexibilität werden so Beschichtungslösungen für individuelle Anforderungen hergestellt.
INSPEKTION, REPARATUR UND NEUBESCHICHTUNG
Unsere Leistungen und Services umfassen alle Arbeiten von der Beschichtung
über die Reparatur bis hin zur regelmäßigen Inspektion:
- Durchführung von Beschichtungen auf Bauteilen mit Dimensionen bis zu 2 m
Durchmesser, 17 m Länge und 20 t Gewicht - Anwendungsorientierte und zielgenaue Beschichtungsauswahl- Neubeschichtung auf Hochleistu ngs-/Walze
nbeschicht ungsanlage n
anlagen
Profiles and Profile Tubes Made by Inometa
Aluminum profiles made by Inometa are used as housing tubes for engines and
transmissions as well as in the mechanical engineering and printing industry.
Some standard profile tubes are always in stock; other profiles can be produced
according to drawing for our customers to be delivered on time and kept at the
ready. Besides various aluminum alloys, we also use fiber-reinforced plastics
such as CFRP or GFRP upon request.
02.05.076
Rollers and roller coatings
Walzen und -bezüge
INOMETA ALUMINIUM- UND CFK- WALZEN : HOHE QUALITÄT EINER AUSGEREIFTEN KONSTRUKTION
Aluminium-Leichtlaufwalzen von Inometa sind langjährig erprobt. Ihre ausgereifte
Konstruktion mit dem extremen Leichtlauf garantiert hohe technische Sicherheit
© 2014 Messe Düsseldorf GmbH
327
© 2014 Messe Düsseldorf GmbH
328
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
09/20/2013
Institut für Kunststoffverarbeitung (IKV) in Industrie und
Handwerk an der RWTH Aachen
Address
Pontstr. 49
52062 Aachen
Germany
Phone
+49 241 8093806
Fax
+49 241 8092262
Internet address
www.ikv-aachen.de
E-Mail
zentrale@ikv.rwth-aachen.de
Stand
Hall 14, C16 (Page 910)
Company News
09/19/2013
In conjunction with 14 partners, IKV presents
ambitious project on reactive moulding
Aachen, September 2013 – The Institute of Plastics
Processing (IKV) in Industry and the Skilled Crafts at
RWTH Aachen University will again be represented at
this year’s K in Düsseldorf from October 16 – 23, 2013.
It will have its own stand in Hall 14/C16. In an ambitious
exhibition project involving 14 project partners, IKV will
demonstrate the processing of fibre-reinforced plastics
(FRP) with thermoplastic matrices by injection moulding. The project combines the advantages of the liquid
impregnation process, which allows the processing of textile preforms, with the
benefits of a thermoplastic matrix. For this, the research team is developing
a completely automated, highly integrated process that takes advantage of socalled in-situ polymerisation. By transferring the system to the injection moulding process (in situ injection moulding), it is possible to combine complex fibre
preforms with a monomer for large-volume production directly in the injection
moulding machine. The IKV research team chose a shin guard as the demonstrator.
Institut für Kunststoffverarbeitung (IKV) in...
IKV on Science Campus: Functional plastic surfaces
On the subject of ”Functional plastic surfaces”, IKV will
present an overview of applications and their innovative production processes such as injection moulding,
thermoforming, extrusion blow moulding and plasma
coating. It will showcase a process chain for microstructured surfaces, from mould manufacture to
functional testing. Variothermal extrusion compression moulding of microstructured film will be demonstrated live on the extruder.
Science Campus, Hall 7
Micro structured surfaces: contact angle measurement for evaluation of superhydrophobic film surfaces (Photo: IKV)
Conventional production processes for FRP parts have a number of disadvantages. For example, until now they have required two separate processes
(e.g. for nylon composite sheet: impregnation and moulding). Furthermore, the
moulding is restricted to comparatively simple geometries and a limited range of
surface finishes. The IKV process aims to eliminate these disadvantages. With
the in situ injection moulding process, the textile preform is impregnated with
low-viscosity caprolactam monomer, and then reacts by in situ polymerisation
to produce polyamide 6.
Requirements for this new process, apart from an optimised matrix formulation,
include customised fibre/sizing systems, a special injection moulding machine
technology and, above all, innovative mould, sealing and process engineering.
The shin guard has been chosen to demonstrate the effectiveness of the process. The part consists of a hard protective component made of fibre-reinforced
thermoplastic and the flexible component made of thermoplastic elastomer
(TPE). As a result, the part has high mechanical properties, good impact behaviour, low weight and high wear comfort. Furthermore, the highly integrated
innovative process allows the high-volume production needed for series manufacture.
The partners in the IKV exhibition project include: ASS Maschinenbau, Clariant, EM-Systeme, ENGEL AUSTRIA, Gummiwerk Kraiburg, gwk Gesellschaft
Wärme Kältetechnik, Hasco Hasenclever, Hennecke, Keller Lufttechnik, Kistler
© 2014 Messe Düsseldorf GmbH
329
© 2014 Messe Düsseldorf GmbH
330
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Instrumente, LANXESS Deutschland, P-D Interglas Technologies, Piovan and
Schöfer.
Hall 14/C16
www.ikv-aachen.com
Shin guard made of fibre-reinforced thermoplastic and TPE by in situ injection
moulding (photo: IKV)
03/20/2013
absorbable, drug-eluting implants. By means of the reproducible dosing of the
materials and the optimised controlling of the process, porous osteosynthesis
plates or stents are as well possible.
The participating institutes extend their thanks to the Bundesministerium für Bildung und Forschung (BMBF) for supporting this research project (No. 13 N
11306).
www.ikv-aachen.de
Composition of the drug delivery system with absorbable foam (Figure: IKV)
Efficient drug release by absorbable foam
IKV develops carrier system for treatment of overactive
bladder
09/19/2013
Aachen, in January 2013. The Institute of Plastics Processing (IKV) at RWTH Aachen University is investigating, together with partner institutes, the controlled
release of drugs for the treatment of common diseases of the urinary bladder
as e.g. the overactive bladder. The drug delivery system (DDS) consists of a
drug-loaded polymer matrix, so called microspheres, which are embedded in
a foamed absorbable carrier system. Within this joint project, it is IKV’s task
to develop the foamed carrier system. Other project partners are Dr. Pfleger
GmbH, Hemoteq AG, DWI at RWTH Aachen, and the department of Urology of
the University Hospital Aachen (UKA).
On the topic of ”Functional integration”, the Institute
will show how the integration of processes, materials
and technologies can be used for the manufacture of
high-quality products and the development of innovative applications, for example in optical technologies.
It will present new processes for shortening the process chain such as integrated metal-plastic injection moulding and the projectile
injection technique, which is a further development of GIT and WIT. IKV will
also demonstrate so-called integrated products, such as structural parts made
of plastic and metal, and components for E&E applications based on innovative,
electrically conductive plastic compounds.
In this novel approach of treatment the drug delivery system (DDS) is directly
placed into the urinary bladder. The drug release and the excretion of the system are controlled by the degradation of the carrier system. Thus, the active
agent has a locally lasting effect in the bladder and won’t affect the whole body
compared with the intake of tablets. Also a regular catheterisation in short time
intervals, often several times a day, is no longer required.
The carrier system is manufactured at IKV in the CESP process (Controlled Expansion of Saturated Polymers). The technology of the CESP process enables
the possibility of processing temperature-sensitive materials, like the used poly
(D,L-lactide-co-glycolide)-co-PEG. The material can be processed in a CO2 atmosphere at high pressure (approx. 50 bar) at low temperatures of approx.
50 °C. By an extension of the CESP process, a powdery polymer microsphere
mixture can be foamed specific via a pressure controlled, continuous variable
discharge. The adjustment of the degradation of the carrier system to medically necessary periods is possible by the termination of the foam structure. For
reproducible manufacturing of the carrier system in the range of micrograms a
dosing unit and adapted cavities are integrated into the process chain.
This extension of the CESP process allows more applications in the scope of
© 2014 Messe Düsseldorf GmbH
331
IKV on Science Campus: Functional integration
Science Campus, Hall 7
Extrusion of stuctured films at IKV pilot plant (photo: IKV/Winandy)
Product Overview
Institut für Kunststoffverarbeitung (IKV) in...
02.01.010
Parts made by injection moulding
03.02.002.01.03
Injection moulding machines above 1000 kN to 4000
kN clamping force
03.06.001
Injection and compression moulds
04.03
Trade associations
04.06
Science and consulting
© 2014 Messe Düsseldorf GmbH
332
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Este importante cambio nos permitirá desarrollar una calidad de servicio mayor,
más próxima y adecuada a nuestros clientes, con un rendimiento más eficaz y
más sólido.
INTEREP
Address
Z.I., 11 rue de l’industrie
43110 Aurec-sur-Loire
France
Phone
+33 4 77352021
Pueden contar con una organización unida que dispone de medios de desarrollo
y de producción óptimos.
Product Overview
INTEREP
Fax
+33 4 77352617
01.04.026
Closed cell foam rubber
Internet address
www.interep.fr
02.05.010
Sealing profiles
E-Mail
info@interep.fr
02.05.056
Foam products
Stand
Hall 06, C54-4 (Page 878)
02.05.060
Cords
Company News
08/20/2013
INTEREP
02.05.060
Merge of Interep - Socatex
Cords
Productos de la gama NEOPRENO (CR) perfiles en
caucho
Thus the new company Interep is made up of both original companies, one being in Aurec, the other in Leers.
This important change will allow us to develop our customer services, to simplify
exchanges with the wider trading world and to render the new firm more efficient
and robust.
From now on you may count on our unified structure with reinforced and optimized means of development and production.
Nuestros perfiles estándar son :
cordón negro de neopreno, de 2 mm a 25mm diferentes tipos de cuadrados
negros diferentes tipos de rectángulos negros diferentes tubos negros
También podemos desarrollar perfiles especiales a petición con diferentes formas, colores, densidad, dureza.
CR NEOPRENE CORDS
Fusion Interep - Socatex
Product range NEOPRENE (CR) SPONGE RUBBER
PROFILES
Nos complace anunciar la fusión de las dos empresas
Interep y Socatex, a partir del 1 de julio de 2013.
Our standard stock profiles are :
La nueva empresa Interep está compuesta de ambas
empresas originarias, una en Aurec y la otra en Leers
© 2014 Messe Düsseldorf GmbH
INTEREP
CR NEOPRENE Cordones
We are happy to announce the merger of the two companies Interep and Socatex from July 1st 2013.
09/13/2013
Product Details
Cords from 2 mm to 25 mm diameter black color squares rectangles half-rounds
tubes
333
© 2014 Messe Düsseldorf GmbH
334
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
формы, цвета, плотность, твердость
We also can develop special profiles available on request with various shapes,
colors, densities, hardness
CR schnure
CR NEOPRENE CORDS
Produktpalette Profile (CR)
Gamme de produits cordes et profiles Néoprène (CR)
•Schnur ab 2 mm bis 25 mm Durchmesser, schwarze
Farbe
Nos profils standard en stock sont:
•Verschiedene schwarze Vierkantprofile
Cordes de 2 mm à 25 mm de diamètre, de couleur noir différents types de carrés
noirs différents types de rectangles noirs différents tubes noirs
Nous pouvons également développer des profils spéciaux qui sont disponibles
sur demande avec des différentes formes, couleurs, densité, dureté….
•Verschiedene schwarze Rechteckprofile
•Verschiedene schwarze Halb-rundprofile
•Verschiedene schwarze Schläuche
Wir können auch spezielle Profile mit verschiedenen Formen, Farben, spezifisches Gewicht, Härte, auf Anfrage entwickeln ,
CR NEOPRENE ESPANSO CORDONCINI
Gamma di prodotti: GUARNIZIONI IN NEOPRESE(CR)
ESPANSO
Isik Plastik A.S.
Le guarnizioni standard disponibili nei nostri magazzini
in Stock Service sono:
Address
Gosb Ihsan Dede CD 100 Sok. Gebze
41480 Kocaeli
Turkey
Phone
+90 262 7512235
• tubi di diverse dimensioni nel colore nero
Fax
+90 262 7512240
Siamo inoltre in grado di sviluppare guarnizioni speciali su richiesta con varie
forme, colori, densità e durezza.
Internet address
www.isikplastik.com.tr
CR NEOPRENE FOAM CORDS
E-Mail
isikplastik@isikplastik.com.tr
Ассортимент продукции неопрена (CR) Профайлы
губчатой резины
Stand
Hall 07a, C22 (Page 880)
• Cordoncini da 2 mm fino a 25 mm di diametro nel colore nero
• forme quadre nere di differenti dimensioni
• forme rettangolari nere di differenti dimensioni
• forme semi circolari nel colore nero
Наши стандартные профили акции являются:
Шнуры от 2 мм до 25 мм диаметром черный цвет различных площадях
черный прямоугольников черного разных периодов раундов черный различных
труб черный
Мы также можем разработать специальные профили по запросу с различной
© 2014 Messe Düsseldorf GmbH
335
© 2014 Messe Düsseldorf GmbH
336
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
08/06/2013
Isik Plastik A.S.
08/06/2013
2013- 2 NEW PCMW LINES HAS BEEN LAUNCHED
As part of our continuous investment, 2 new polycarbonate multiwall lines of 15 ton/day capacity together
with 4 dies were installed in 2013. With these lines
ISIK enriched its product range with 7 Wall 16 mm and
20mm, also with 9 walls 25 and 32mm sheets.
2012- NEW WAREHOUSE OF 6.000 SQM
A new warehouse of 6.000 sqm equipped with panel
size racks was brought into service.
08/06/2013
10/09/2013
CE CERTIFICATE OF 15MM PMMA XT FOR SOUND
BARRIER
İsik Plastik received CE certification for ”15mm Clear PMMA XT
sheets sound barrier application.
2012- PLASKOLITE (USA)- ISIK PLASTIK JOINT
VENTURE
Isik Plastik went into partnership with world’s lasrgest
acrylic sheets producer Plaskolite Inc.(Ohio,USA) to
erect a 1.000 tons cast acrylic plant in Malatya TURKEY. This state of the art
cast plant, unique in Turkey; is planned to start production in 2014.
Norm : EN 14388
Sound Insulation : 31 dB (category B3)
Product Overview
Isik Plastik A.S.
CE CERTIFICATE OF 12 MM PC SOLID FOR SOUND
BARRIER
Isık Plastik received CE certificate for Policam 12mm PC Solid
Sheets sound barriers appalications.
02.01.002
Products made by extrusion
02.04.001.04
Semi finished products of polycarbonate (PC)
Sound Insulation: 31 dB (category B3)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.08
Semi finished products of polystyrene (PS)
10/09/2013
Norm: EN 14388
08/06/2013
2013- CNC PANEL SAW HAS BEEN INSTALLED
Product Details
A CNC panel saw was installed to satisfy growing number of cut-to-size orders
of diversifying customer base.
02.01.002
Isik Plastik A.S.
Products made by extrusion
PETG SHEETS
DEVOTED TO PERFECTION: Our PetG sheets are
produced with a 20 ton/day capacity well equipped
Omipa Line. Production is isolated in a clean room
against dust and particles to protect our pure transpar-
© 2014 Messe Düsseldorf GmbH
337
© 2014 Messe Düsseldorf GmbH
338
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ent sheets. 100% virgin raw material is the key of the
excellent light transmission 89% and low haze values of our transparent sheets.
PetG offers the opportunity to save on processing cost as result of its ability to
be formed at lower than usual temperatures and shorter cycle times. Combines
with chance to remove any surface scuffs with just a air blower before shipping
the finished article makes Pet_G a perfect cost-saver.
And furthermore PetG sheets do not need predrying before thermoforming process. This save a considerable amount of time and money.
Thickness : from 2mm up to 10mm
Colors: clear, opal, white
Dimensions: 2050*3050 (standard) + CTS available upon request with MOQ
02.04.001.04
Semi finished products of polycarbonate (PC)
POLYCARBONATE MULTIWALL AND SOLID SHEET
Polycarbonate Sheets are produced from high quality
raw material, having light transparency like glass, suitable for thermoforming, cold and hot bending, protecting their stiffness at very low or high temperatures, UV
protected, resistant to outdoor conditions, 50% lighter
and 300 times more impact resistance than glass. On one hand the product
is 50% lighter than glass on the other hand it has 2 times more impact resistance than Pet-G, 10 times more than PMMA. Solid transparent polycarbonate
sheets are outstanding for their hardness, impact strength and high temperature
resistance.
Solid Polycarbonate Sheets: (CE Certified)
Thickness: 2mm up to 15mm
Length: from 1.000mm up to 13.000 mm
Width: 980mm, 1000mm, 1050mm,2100mm
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
ACRYLIC PMMA XT SHEETS
STATE OF THE ART TECHNOLOGY. IRREPROACABLE SHEETS:
Our acrylic sheets are produced with a 20 tons/day capacity well equipped with Omipa Line. Production is isolated in
a clean room against dust and particles to protect our pure
transparent sheets. 100% virgin raw material is the key of the
excellent light transmission 92% and low haze values of our
transparent sheets.
CE CERTIFIED: Our SOUNDBLOCK acrylic sheets specifically developped for
noise barriers are CE certified and supplied to various projects in Europe and
Turkey. The airbourne sound insulation value of our 15mm sheets is 30 dB and
classified as Class B3 under EN 14388.
CUT TO SIZE SHEETS (CTS) : Acrylic sheets can be run-to-size as small as
820*700 mm at the end of the line. Smaller sizes can be prepared in our sizing
unit to satisfy your needs.
PMMA Sheets are naturally resistant to UV light and outdoor conditions without
requiring any additional protection, It is glass-like transparent, 50% lighter and
higher impact resistant than glass. Suitable for thermoforming, easily machined
and has the highest scratch resistant comparing with other transparent plastic
sheets. It has perfect transparency and brightness. Its thickness and dimension
tolerances are much less and its surface is much smoother than cast acrylic
sheets. Additionally, PMMA sheets are resistant to various corrosive chemicals.
Features:
Size: 2050*3050 and CTS available with MOQ
Thickness: from 2mm up to 15mm
Multiwall Polycarbonate Sheets:
Sizes: 2050*3050, 1350*2050, 1000*2000, CTS available upon request with
MOQ
Thickness:
2-walls: 4mm, 6mm, 8mm, 10mm
3-walls: 14mm, 16mm
4-walls: 8mm, 10mm
7-wall (x type): 16mm, 20mm
9-wall (x type): 25mm, 32mm
© 2014 Messe Düsseldorf GmbH
339
© 2014 Messe Düsseldorf GmbH
340
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
introducing IMC technology or help to identify potentials for optimising your processes –simply In-Mould “Complete” service!
ISL-Chemie GmbH & Co. KG
Address
Cliev 11
51515 Kürten
Germany
Phone
+49 2207 9691-0
Fax
+49 2207 9691-29
Internet address
www.k2013.berlacgroup.com
E-Mail
regina.wolf@isl-chemie.de
Stand
Hall 07.1, D20 (Page 886)
ISOTHAN®- coatings integrate directly into our customers’ in-mould-coating moulding process. IMC creates a refined surface on polyurethane moulded parts. The
coating also imparts desirable physical properties to the moulded part such as
abrasion resistance, greater chemical resistance and light fastness. Solventbased [ISOTHAN® NT] and water-based [ISOTHAN® WB] coatings are both
available. ISOTHAN®-WB lacquers comply with the latest emissions protection
guidelines.
On request, we will optimally match the colouristic properties of our ISOTHAN®
lacquers to the pigment paste used for colouring. In this way ISL offers a tailormade one-stop colouring solution.
Application areas
Automotive interior components, e.g. steering wheels, headrests, gear knobs,
door panel, instrumental panel Exterior vehicle applications Maritime applications, e.g. buoys Furniture industry, e.g. garden furniture, arm and backrests
Product features/ advantages
Product Overview
ISL-Chemie GmbH & Co. KG
01.01.038
Pastes
01.10.048
Colourants
01.14.012
Paints, coatings
Protective function: longer life of your products High resistance to physical and
chemical stresses Optimised process compared to subsequent coating Refined,
high-quality and appealing surface Lettering, markings and symbols can be added
Typically low-cost introduction of the technology Colouring solution from one
source: perfectly matched in-mould coating and PU colour paste Custom solutions for specific customer needs and tailored service
For further information please click our special K2013 website at www.k2013.berlacgroup.com.
ISL, 01.06.2013
02.05.007
ISOTHAN® In-Mould-Coating
Coatings
ISOTHAN®: In-Mould-Coatings zur Oberflächenveredelung von PU-Formteilen.
Product Details
02.05.007
ISL-Chemie GmbH & Co. KG
Coatings
ISOTHAN® In-Mould-Coating
ISOTHAN®: In-Mould-Coatings for surface refining of PU moulded parts.
In close collaboration with our customers, we develop individual in-mould coating
systems precisely adjusted to the strict requirements of the respective customer
applications, now including outdoor applications.
Your benefits: at your request, our application technology team assists you on
© 2014 Messe Düsseldorf GmbH
341
In enger Zusammenarbeit mit unseren Kunden entwickeln wir individuelle InMould-Coating-Lacke, die exakt auf die hohen Beanspruchungen der jeweiligen
Kundenanwendungen abgestimmt sind, jetzt auch für den Außenbereich.
Ihr Plus : Unsere anwendungstechnische Beratung unterstützt Sie auf Wunsch
bei der Einführung der IMC-Technologie oder zeigt Möglichkeiten zur Prozessoptimierung auf – eben In-Mould-„Complete“!
ISOTHAN®-Lacke werden mittels In-Mould-Coating-Verfahren direkt in den Formgebungsprozess unserer Kunden integriert. Durch die IMC-Lackierung erhalten diese Polyurethan-Formteile eine veredelte Oberfläche. Anforderungen an
die physikalischen Eigenschaften der Formteile wie z.B. Kratzfestigkeit, verbesserte
© 2014 Messe Düsseldorf GmbH
342
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Lösemittelbeständigkeit und Lichtechtheit werden durch die Lackierung erfüllt.
Zur Auswahl stehen lösemittelhaltige [ISOTHAN® NT] als auch wasserbasierte
Lacke [ISOTHAN® WB]. ISOTHAN®-WB Lacke entsprechen den neuesten Richtlinien zum Emissionsschutz.
ISO-TECH Kunststoff GmbH
Address
Rottweg 22
48683 Ahaus
Germany
Phone
+49 2561 4290-0
Fax
+49 2561 4290-11
Internet address
www.iso-tech.net
E-Mail
verkauf@iso-tech.net
Stand
Hall 08a, B11 (Page 894)
Auf Wunsch stimmen wir unsere ISOTHAN®-Lacke rbung verwendete Farbpaste ab. So bietet ISL bei der Farbgebung eine maßgeschneiderte Komplettlösung aus einer Hand.
Anwendungsgebiete
Komponenten im Automobilinnenraum, z.B. Lenkrad, Kopfstütze, Schaltknopf,
Türseitenverkleidung, Instrumententafel Außenanwendungen in der Fahrzeugindustrie, z.B. Anbauteile Maritime Anwendungsfelder, z.B. Hochseebojen Möbelindustrie, z.B. Gartenmöbel, Arm- und Rückenlehnen
Ihr Vorteile auf einen Blick
Schutzfunktion: längere Lebensdauer ihrer Produkte Höhere Beständigkeit gegen
physikalische und chemische Beanspruchungen Optimierung des Prozessablaufs
gegenüber einer nachträglichen Lackierung Veredelte und hochwertig anmutende Oberfläche Anbringen von Schriftzügen, Kennzeichnungen und Symbolen
möglich In der Regel kostengünstige Einführung der Technologie Farbgebung
aus einer Hand: IMC-Lack und PU-Farbpaste perfekt aufeinander abgestimmt
Individuelle Lösung für die kundenspezifischen Anforderungen und maßgeschneiderte Serviceleistung
Mehr zu den neuen ISL In-Mould-Coatings erfahren Sie auf unserer speziellen
Messe-Webseite www.k2013.berlacgroup.com.
ISL, 01.06.2013
© 2014 Messe Düsseldorf GmbH
343
Product Overview
ISO-TECH Kunststoff GmbH
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
© 2014 Messe Düsseldorf GmbH
344
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.015
Plastics products and parts for transport/packaging
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.05.027
Rubber / plastics combinations
02.05.033
Storage and transport containers
02.05.034
Bearing boxes, bushes and sections
02.05.035
Bogie wheels and runners
02.03.014
Plastics products and parts for food processing industry
Chopping-boards
Chopping boards are available in various sizes and
thickness, fitted with rubber pins, liquid collecting facility, grooves for juice collection, handling or fitting table
tops for all available desk systems.
The advantages of ISO-LEN® 500:
high grade plastic-materialneutral in tastenon-toxicno
harm to cutting-instrumentsno absorption of liquideasy
to cleansuitable for dish-washersunbreakableenvironment friendly
In addition to our standard-range we produce finished parts according to drawings or samples.
Standard-colours: natural, brown, black and many others on request
02.05.027
Rubber / plastics combinations
ISO-LEN® 1000
Product Details
02.03.001
ISO-TECH Kunststoff GmbH
ISO-LEN® 1000 has proven itself a great success for
several years in the beverage and packaging industries. Due to the very low coefficient of sliding friction,
the wear to machinery parts is reduced to a minimum.
Plastics products and parts for plant building
Chain guides
ISO-LEN® 1000 has proved a success in the beverageand packing industry for years. Due to the very low coefficient of sliding-friction the wear of machine parts is
reduced to a minimum.
ISO-LEN® 1000 outstanding qualities are:
high abrasion resistance low friction coefficient selflubrication impact-proof
Due to these properties our ISO-LEN® 1000 products are used for technical
applications where specific high-performance plastics are needed.
Machine components are often exposed to acid media or water and detergents.
Please ask for our details about chemical resistance of our products.
We do not only supply products made of PE-UHMW or PE-HMW, but other thermoplastics like PA, PP, PC, POM, PVDF, etc..
ISO-LEN® 1000 is a very high-molecular-weight polyethylene, produced by
Ziegler catalytic converter low-pressure polymerisation. Its molecular weight is
approx. 4 m/mol-measured viscosimetrically.
ISO-LEN® 1000 is used in the manufacture of star conveyors, guide rollers and
© 2014 Messe Düsseldorf GmbH
345
© 2014 Messe Düsseldorf GmbH
346
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
deflector rollers for bottling, as well as cleaning or labelling machines, bearing
boxes, sliding rails, rubbing strips, screw-conveyors, chain guides, adjusters,
etc.
good mechanical application vibration and noise reducing acid and chemicalproof nonporous environmentally friendly effectively resistant to stress-cracking
This value represents what is commonly known as the mean molecular weight.
Results may vary with other determination methods. The high molecular weight
gives rise to high viscosity in solution and to pronounced viscoelastic behaviour
of the melt.
We recommend our ISO-LEN® 500 for parts which are not stressed as much. It
has less impact resistance and is substantially less hard-wearingas its molecular
weight is only between 500,000 and 700,000.
Alongside ISO-LEN® 1000 and ISO-LEN® 500, we also produce regenerated/reclaimed
material from these basic ingredients. Modifying our ISO-LEN® material through
using various additives, we can obtain highly improved technical values, which
may be needed for some jobs.
ISOKON, d.o.o.
Address
Mestni Trg 5a
3210 Slovenske Konjice
Slovenia
Product Overview
ISOKON, d.o.o.
02.01.002
Products made by extrusion
02.01.006
Parts made by mechanical treating
02.03.002
Plastics products and parts for automotive
02.03.007
Plastics products and parts for electrical engineering
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Phone
+386 3 7571100
Fax
+386 3 7571063
Internet address
www.isokon.si
E-Mail
sales@isokon.si
Technologies:
Stand
Hall 05, F30-8 (Page 874)
extrusion of sheets (thickness 0,5-15 mm, max. width 1700 mm) co-extrusion
(AB, ABA) of sheets (thickness from 1,2 mm, max. width 1500 mm) extrusion of
sheets with direct compounding (thickness 1-10 mm, max. width 1600 mm)
Product Details
02.01.002
ISOKON, d.o.o.
Products made by extrusion
Extrusion
Lamination on extruded sheets with:
fleece textile or fabric foam stripe(s) decorative foil logo-printed foil protective
foil
Surface finishing:
© 2014 Messe Düsseldorf GmbH
347
© 2014 Messe Düsseldorf GmbH
348
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
glossy mat differnt textured structures with embossed rolls
Other:
Isokon also offers materials known as wood plastic composites (WPC) for different purposes in the automotive industry.
surface activation with flame treatment ”cut to size” parts from extruded sheets
Key benefits:
light weight durability vacuum formable recyclable ”tailor made” product
02.01.006
Parts made by mechanical treating
Key applications:
CNC
11.10.2013
car boot liners trays bumper protection under the bonnet reinforcement of seat
bodies layer pads
Because of investments into technology and development, we are oriented into
the application of modern materials and production technologies.
02.03.007
Capacities:
Plastic products and parts for electrical engineering
Presses - dimension in mm:
We use:
2510 x 6100
Polymeric material for use in electric industry Material for back walls in electrical
distribution enclosures Special polypropylene reinforced with talc and additives
1220 x 6100
Plastics products and parts for electrical engineering
Sheets are characterized by:
1020 x 6100
high flexural modulus good high deflection temperature low shrinkage self-extinguish
properties.
2050 x 4530
2020 x 2020
Isoform PPT30FR R7035 sheets are mainly intended for applications in the electrical industry and are tested in accordance with standard IEC 60695-2-12 and
can withstand temperatures up to 750 Degrees Celsius.
Machining capabilities:
Milling
Profiling
Because of the insulative and self-extinguishing characteristics, the sheets are
most appropriate for applications in electrical distribution enclosures as a back
wall and also for independent walls.
Cutting
02.03.011
CNC machines with working table:
Mechanical engineering
width: from 600 mm to 2400 mm length: from 1000 mm to 5600 mm
Mechanical engineering elements are products that in most cases are produced
to order and according to customer’s drawings, or as autonomous technical solutions that are developed and technologically included in the customer’s projects.
Turning
02.03.002
Plastics products and parts for automotive
Plastic products and parts for automotive
The Isoform product range offers a variety of ”Tailor made” extruded and coextruded sheets which are used in the automotive industry as parts or additional
equipment in vehicles.
The variety of material properties allows the possibility of using the materials
for a large range of applications. The material’s benefits include reinforcement,
antistatic, electroconductive, controlled flammability, anti-slip and structured surface, soft touch, sound insulation proofing, etc. as well as VDA 4503 compliant
for European wheel pallet systems (EWPS).
© 2014 Messe Düsseldorf GmbH
349
Plastics products and parts for mechanical engineering
Advantages of KOTERM material:
excellent wear and absorption resistance very low coefficient of friction selflubrication no moisture absorption.
Examples of use:
gear wheels sprockets belts bushings transport pallets for automated lines wheels
guide rails machine components for all industries.
© 2014 Messe Düsseldorf GmbH
350
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.014
Plastics products and parts for food processing industry
face, soft touch lamination with durable foam, sterilization, metal detection, etc.
as well as VDA 4503 compliant for European wheel pallet system (EWPS).
Our product in food processing industry
Key applications:
STERILIZATION
pallets cases (boxes) containers trays layer pads
ISOSTER sterilization pads offer you high-quality, economical solution for use
in the autoclave sterilization process. Special compound developed for this application offers high bending resistance at high temperatures. The mats are
compact and developed to operate under the most rigorous conditions.
Semi finished products of Polyetylene (PE)
CUTTING BOARDS for food preparation
Pressed KOTERM
The high-quality of KOTERM PE 500 cutting and chopping boards allow their
use in restaurants and hotel kitchens, private households, bakeries and alike.
They are successfully utilized in industries for preparing and processing meat
products, in fish-processing industry, as well as all manufacturing plants utilizing
contemporary technologies.
Semi finished products of Polypropylene (PP)
SLIDING COMPONENTS
Isokon components for conveyor, canning and bottling lines are used in areas
where frictionless transport is required.
Examples of use:
straight chain guides (series 880 TAB-881 TAB, 880, 881,882 TAB) corner chain
guides (two-part series 882 TAB and three-part series S811-SS881-D880-LF88)
shoe heels magnetic lower corner parts chine guides (DIN 8187) wedge-shaped
guiding strips chain guides (DIN 766) sliding belts and profiles sprockets
FILLING AND BOTTLING EQUIPMENT
02.04.001.05
Semi finished products of polyethylene (PE)
Extruded ISOFORM
02.04.001.07
Semi finished products of polypropylene (PP)
Extruded ISOFORM
Pressed KOTERM
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Other-semi finished product/Pre-cut parts
Synthetic Ice panels
Dasher boards
Plywood
Lining
Sterilization
Isokon components for bottling and filling industry and customer made components are used in the areas where frictionless transport is required.
Examples of use:
worms stars curves turner sprockets
02.03.015
Plastics products and parts for transport/packaging
Transport and packaging plastic parts
The Isoform product range offer a variety of ”Tailor made” extruded and coextruded sheets which can be easily formed into products for different purposes
especially in industrial logistics.
Engineered material properties allow the possibility of using the materials in different applications which require material performance, antistatic, electroducive,
controlled flammability, temperature resistance, anti-slip and a structured sur-
© 2014 Messe Düsseldorf GmbH
351
© 2014 Messe Düsseldorf GmbH
352
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Isosport Verbundbauteile GmbH
Address
Industriestr. 2-8
7000 Eisenstadt
Austria
Phone
+43 2682 703-0
Fax
+43 2682 703-4222
Internet address
www.isosport.com
E-Mail
office@isosport.com
Stand
Hall 05, F30-8 (Page 874)
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
02.04.002
Films
02.05.068
Technical films
02.05.074
Composite boards
Product Details
02.01.002
Isosport Verbundbauteile GmbH
Products made by extrusion
ICP-Permaskin®
Product Overview
Isosport Verbundbauteile GmbH
01.14.017
Stamping foils
02.01.002
Products made by extrusion
02.01.003.03
by pultrosion
02.01.004
Products made by calendaring
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.04.001.03
Semi finished products of polyamide (PA)
The film made out of Permaskin®-compound from BASFcompany is about 300microns thick and therefore extremely durable, weather- and chemical-resistant. It
is characterized by high color consistency and can
be readily processed (vacuum thermoforming). Also
strong expansion of wood or metal structures caused by temperature or humidity
uptake, survived harmless from these high-quality film.
The high durability, the regular repainting necessary especially for wood are not
necessary in the longer term. However, the film can be easily overcoated.
Isocap & Isodur
Our core competence lies in the (co) extrusion of sheets,
technical films, especially embossed foils with unique
optical depth effects. Our experience in printing provides more and more opportunities to use our films for
design application outside the sports industry.
Most of our films are transparent and cover a wide temperature range in usage due to the high thermal stability. Furthermore, our products have a very high UV and weather resistance paired up with high wear and
excellent chemical resistance.
Our Isodur-sheets, made of ABS, are optimized in terms of low temperature
impact strenght and good bonding and available in many colors.
© 2014 Messe Düsseldorf GmbH
353
© 2014 Messe Düsseldorf GmbH
354
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.01.003.03
UV and weather resistance paired up with high wear and excellent chemical
resistance.
by pultrosion
Isoglass
Due to the good processability (thermoforming) our specialty films are applicable
as an alternative to consuming and expensive painting. So they can be used
for surface finish (especially at elevated requirements for chemical resistance
and scratch resistance) for injection molded parts (FIM – Film Insert Moulding
process) or as paint replacement films for RTM components.
Our epoxy laminates, manufactured in a continuous
process, offer optimum reinforcement on a defined level
along the production length.
Whether glass, basalt, carbon fiber, or combinations
thereof - we offer a range of special fabric design to
provide the necessary strength or stiffness.
In addition to printing (eg. by screen printing or thermo sublimation) our surface
embossing provide surprising decorative effects!
Discover the 4th dimension!
Especially our grid laminates offer – due to the special fabric structure - a very
good anchorage in the surrounding composite structure.
Fiberglass
With Opto 4D Isosport succeeded to establish a transparent lenticular film with
excellent optical depth effect and top material properties.
There are almost all the effects possible: whether circles, ellipses, dots, stripes
or combinations thereof. So Opto 4D opens up a new dimension in decorative
films!
An effective, robust and proven base material
Basalt fiber
Opto 4D is offered by default in PA, but can also be made from other plastics
such as styrene polymers, PET, etc..
Exclusive, with a higher strength than fiberglass.
The right choice when weight reduction plays a (big) role!
Carbon fiber
Depending on the material used, Opto 4D can be printed by thermal transfer or
screen printing.
Our high-tech premium product - combines high stiffness and low weight.
The film is produced in an endless process and is available on a roll.
Due to our innovative manufacturing process we are able to offer an exceptionally good value for money!
02.03.002
Potential applications include sandwich belts in the ski and snowboard area or
in similar composite applications, such as sports arches or wind energy.
Especially our carbon fiber laminates are used in the construction industry for
reinforcements of buildings or bridges.
02.01.004
Products made by calendaring
LaminaeX
The ongoing developments and requirements in the
lightweight range require the use of new, more efficient
composite materials with an optimum of high mechanical strength and rigidity at a low weight!
ISOSPORT has taken account of these requirements
and developed the LaminaeX sheet in sandwich construction. The basis for every LaminaeX grade is a core of PP foam. Through a
special process a very homogeneous and closed-cell foam structure with a low
specific weight (350 - 550 kg/m³) and high compressive strength is achieved.
Isocap & Opto 4D
Our core competence lies in the (co) extrusion of sheets
and technical films, especially embossing foils with
unique optical depth effects. Our experience in printing provides more and more opportunities to use our
films for design application outside the sports industry.
The foam core, combined with high tensile strength cover layers, such as aluminum or composite sheet materials, forming a durable sandwich structure.
Most of our films are transparent and cover a wide temperature range in usage
due to the high thermal stability. Furthermore, our products have a very high
© 2014 Messe Düsseldorf GmbH
Plastics products and parts for automotive
355
The variety of design options provides a perfect balance between the essential
properties of weight, mechanics, durability and price / performance ratio in a
© 2014 Messe Düsseldorf GmbH
356
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
wide range of applications (eg. vehicle plates for truck or horse trailers, formwork
panels in the construction industry, boards for large tanks or bands in the sports
area, etc.)
for surface finish (especially at elevated requirements for chemical resistance
and scratch resistance) for injection molded parts (FIM – Film Insert Moulding
process) or as paint replacement films for RTM components.
02.03.003
In addition to printing (eg. by screen printing or thermo sublimation) our surface
embossing provide surprising decorative effects!
Plastics products and parts for building applications
Discover the 4th dimension!
LaminaeX
With Opto 4D Isosport succeeded to establish a transparent lenticular film with
excellent optical depth effect and top material properties.
The ongoing developments and requirements in the
lightweight range require the use of new, more efficient
composite materials with an optimum of high mechanical strength and rigidity at a low weight!
ISOSPORT has taken account of these requirements
and developed the LaminaeX sheet in sandwich construction. The basis for every LaminaeX grade is a core of PP foam. Through a
special process a very homogeneous and closed-cell foam structure with a low
specific weight (350 - 550 kg/m³) and high compressive strength is achieved.
The foam core, combined with high tensile strength cover layers, such as aluminum or composite sheet materials, forming a durable sandwich structure.
The variety of design options provides a perfect balance between the essential
properties of weight, mechanics, durability and price / performance ratio in a
wide range of applications (eg. vehicle plates for truck or horse trailers, formwork
panels in the construction industry, boards for large tanks or bands in the sports
area, etc.)
02.04.001.03
Opto 4D is offered by default in PA, but can also be made from other plastics
such as styrene polymers, PET, etc..
Depending on the material used, Opto 4D can be printed by thermal transfer or
screen printing.
The film is produced in an endless process and is available on a roll.
02.04.001.13
Semi-finished parts/products
reinforced plastics
made
from
fibre-
Isoglass
Our epoxy laminates, manufactured in a continuous
process, offer optimum reinforcement on a defined level
along the production length.
Semi finished products of polyamide (PA)
Isocap & Opto 4D
Whether glass, basalt, carbon fiber, or combinations
thereof - we offer a range of special fabric design to
provide the necessary strength or stiffness.
Our core competence lies in the (co) extrusion of sheets
and technical films, especially embossing foils with
unique optical depth effects. Our experience in printing provides more and more opportunities to use our
films for design application outside the sports industry.
Especially our grid laminates offer – due to the special fabric structure - a very
good anchorage in the surrounding composite structure.
Fiberglass
Most of our films are transparent and cover a wide temperature range in usage
due to the high thermal stability. Furthermore, our products have a very high
UV and weather resistance paired up with high wear and excellent chemical
resistance.
Due to the good processability (thermoforming) our specialty films are applicable
as an alternative to consuming and expensive painting. So they can be used
© 2014 Messe Düsseldorf GmbH
There are almost all the effects possible: whether circles, ellipses, dots, stripes
or combinations thereof. So Opto 4D opens up a new dimension in decorative
films!
357
An effective, robust and proven base material
Basalt fiber
Exclusive, with a higher strength than fiberglass.
The right choice when weight reduction plays a (big) role!
Carbon fiber
© 2014 Messe Düsseldorf GmbH
358
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Isocap & Opto 4D
Our high-tech premium product - combines high stiffness and low weight.
Due to our innovative manufacturing process we are able to offer an exceptionally good value for money!
Potential applications include sandwich belts in the ski and snowboard area or
in similar composite applications, such as sports arches or wind energy.
Especially our carbon fiber laminates are used in the construction industry for
reinforcements of buildings or bridges.
02.04.002
Films
ICP Permaskin®
The film made out of Permaskin®-compound from BASFcompany is about 300microns thick and therefore extremely durable, weather- and chemical-resistant. It
is characterized by high color consistency and can
be readily processed (vacuum thermoforming). Also
strong expansion of wood or metal structures caused by temperature or humidity
uptake, survived harmless from these high-quality film.
The high durability, the regular repainting necessary especially for wood are not
necessary in the longer term. However, the film can be easily overcoated.
Our core competence lies in the (co) extrusion of sheets and technical films, especially embossing foils with unique optical depth
effects. Our experience in printing provides more and more opportunities to use our films for design application outside the
sports industry.
Most of our films are transparent and cover a wide temperature
range in usage due to the high thermal stability. Furthermore, our
products have a very high UV and weather resistance paired up with high wear
and excellent chemical resistance.
Due to the good processability (thermoforming) our specialty films are applicable
as an alternative to consuming and expensive painting. So they can be used
for surface finish (especially at elevated requirements for chemical resistance
and scratch resistance) for injection molded parts (FIM – Film Insert Moulding
process) or as paint replacement films for RTM components.
In addition to printing (eg. by screen printing or thermo sublimation) our surface
embossing provide surprising decorative effects!
Discover the 4th dimension!
With Opto 4D Isosport succeeded to establish a transparent lenticular film with
excellent optical depth effect and top material properties.
There are almost all the effects possible: whether circles, ellipses, dots, stripes
or combinations thereof. So Opto 4D opens up a new dimension in decorative
films!
ISF Greenline
These films are made from a starch-based raw material with a proportion of renewable raw materials of 8095%. According ISO14851 standards the material is
100% biodegradable.
Opto 4D is offered by default in PA, but can also be made from other plastics
such as styrene polymers, PET, etc..
Depending on the material used, Opto 4D can be printed by thermal transfer or
screen printing.
By default, these films are available in transparent and
colored white. Other colors on request;
ISF Greenline was developed especially for the production of laminated smart
cards, but is also suitable for other applications with requirements regarding
biodegradability or use of renewable resources (EMAS requirements).
The film is produced in an endless process and is available on a roll.
02.05.068
Technical films
ICP Permaskin®
The film made out of Permaskin®-compound from BASFcompany is about 300microns thick and therefore extremely durable, weather- and chemical-resistant. It
is characterized by high color consistency and can
be readily processed (vacuum thermoforming). Also
© 2014 Messe Düsseldorf GmbH
359
© 2014 Messe Düsseldorf GmbH
360
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
strong expansion of wood or metal structures caused by temperature or humidity
uptake, survived harmless from these high-quality film.
Isofilm, Isospeed
The high durability, the regular repainting necessary especially for wood are not
necessary in the longer term. However, the film can be easily overcoated.
Skived films
Isocap & Opto 4D
Highly wear-resistant PE-films with excellent sliding
properties complete the ”Technical films”-portfolio of
Isosport.
Depending on the molecular weight, the films were extruded or skived from sintered blocks. Especially skived films show an excellent
tribological property level, such as low abrasion and high wear restistance.
Our core competence lies in the (co) extrusion of sheets and
technical films, especially embossing foils with unique optical
depth effects. Our experience in printing provides more and
more opportunities to use our films for design application outside the sports industry.
These films are apart of treads for the ski and snowboard area used for industrial
hoses or as a sliding elements in mechanical engineering.
Most of our films are transparent and cover a wide temperature
range in usage due to the high thermal stability. Furthermore,
our products have a very high UV and weather resistance paired up with high
wear and excellent chemical resistance.
Due to the good processability (thermoforming) our specialty films are applicable
as an alternative to consuming and expensive painting. So they can be used
for surface finish (especially at elevated requirements for chemical resistance
and scratch resistance) for injection molded parts (FIM – Film Insert Moulding
process) or as paint replacement films for RTM components.
In addition to printing (eg. by screen printing or thermo sublimation) our surface
embossing provide surprising decorative effects!
Discover the 4th dimension!
With Opto 4D Isosport succeeded to establish a transparent lenticular film with
excellent optical depth effect and top material properties.
There are almost all the effects possible: whether circles, ellipses, dots, stripes
or combinations thereof. So Opto 4D opens up a new dimension in decorative
films!
Opto 4D is offered by default in PA, but can also be made from other plastics
such as styrene polymers, PET, etc..
Depending on the material used, Opto 4D can be printed by thermal transfer or
screen printing.
02.05.074
Composite boards
LaminaeX
The ongoing developments and requirements in the lightweight
range require the use of new, more efficient composite materials with an optimum of high mechanical strength and rigidity
at a low weight!
ISOSPORT has taken account of these requirements and developed the LaminaeX sheet in sandwich construction.
The basis for every LaminaeX grade is a core of PP foam.
Through a special process a very homogeneous and closedcell foam structure with a low specific weight (350 - 550 kg/m³) and high compressive strength is achieved.
The foam core, combined with high tensile strength cover layers, such as aluminum or composite sheet materials, forming a durable sandwich structure.
The variety of design options provides a perfect balance between the essential
properties of weight, mechanics, durability and price / performance ratio in a
wide range of applications (eg. vehicle plates for truck or horse trailers, formwork
panels in the construction industry, boards for large tanks or bands in the sports
area, etc.)
The film is produced in an endless process and is available on a roll.
© 2014 Messe Düsseldorf GmbH
361
© 2014 Messe Düsseldorf GmbH
362
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Italplastics GmbH
Address
Im Euler 9
55129 Mainz
Germany
Phone
+49 6131 6279127
Italplastics manufactures and delivers extruded PMMA
tubes from Ø 7 mm to Ø 300 mm, cast PMMA tubes
from Ø 50 mm to Ø 500 mm, as well as PC tubes from
Ø 10 mm to Ø 250 mm. High-quality transparent tubes
are our standard product. Tubes with white-opal and satinized finishes are also
available from stock in several diameters.
Fax
+49 6131 6279680
PMMA-Blöcken
Internet address
www.italplastics.com
E-Mail
info@italplastics.com
Stand
Hall 06, E57 (Page 878)
Vorteile sind: höchste Fertigungsqualität und eine nicht
alltägliche Vielzahl an Formaten. Standardstärken gehen
von 30 mm bis 200 mm. Sie können in großer Farbvielfalt ausgesucht werden. Sondereinfärbungen bei geringen Fertigungsmengen und Blöcke für Aquarien-Verglasungen sind nur einige unserer Spezialitäten
im Lieferspektrum. Darüber hinaus verfügen wir über eine große Lagerbevorratung an transparenten, farblosen PMMA-Blöcken.
Product Overview
Italplastics GmbH
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
Product Details
02.04.001.06
PMMA-Rohre
Italplastics fertigt und liefert: extrudierte PMMA-Rohre
von Ø 7 mm bis Ø 300 mm, gegossene PMMA-Rohre
von Ø 50 mm bis Ø 500 mm sowie PC-Rohre vonØ 10
mm bis 250 mm. Sie gehören in transparenter Ausführung zur Standardlagerware bester Qualität. Ebenso erhältlich sind diverse
Durchmesser in opaler und satinierter Ausführung.
Italplastics GmbH
Semi finished products of polymethylmethacrylate
(PMMA)
PMMA blocks
We offer blocks with a really high manufacturing quality
and in a very wide range of formats. Standard thicknesses are ranging from 30 mm to 200 mm and they
can be produced in a great variety of colours. Blocks in
special colours with small production quantities and blocks for aquarium glazing are just a few examples of our specialties. Furthermore, many sizes of cast
transparent PMMA blocks are available from our stock.
PMMA tubes
© 2014 Messe Düsseldorf GmbH
363
© 2014 Messe Düsseldorf GmbH
364
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
J. & F. Krüth GmbH Form-Ätz-Technik
Address
Product Details
Stübbener Str. 96-100
42719 Solingen
Germany
02.01.001
J. & F. Krüth GmbH Form-Ätz-Technik
Parts made by blow moulding
Ätz- und Laserstrukturierung
Einbringen von Oberflächenstrukturen mittels Ätz- und Lasertechnik
Phone
+49 212 383870
Fax
+49 212 313741
02.01.010
Parts made by injection moulding
Ätz- und Lasertechnik
Einbringen von Oberflächenstrukturen mittels Ätz- und Lasertechnik
Internet address
www.krueth.de
E-Mail
stefan.krueth@krueth-gmbh.de
Stand
Hall 02, G15 (Page 866)
Product Overview
J. Schmalz GmbH
Address
Aacher Str. 29
72293 Glatten
Germany
Phone
+49 7443 2403-0
Fax
+49 7443 2403-259
Internet address
www.schmalz.com
E-Mail
schmalz@schmalz.de
Stand
Hall 09, E04 (Page 898)
J. & F. Krüth GmbH Form-Ätz-Technik
02.01.001
Parts made by blow moulding
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.05.047
Surface treated and decorated parts
03.06.001
Injection and compression moulds
© 2014 Messe Düsseldorf GmbH
365
© 2014 Messe Düsseldorf GmbH
366
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.073
Product Overview
J. Schmalz GmbH
Valves
Valve technology
02.05.004
Fastenings
Top-quality valve technology is essential for problem-free operation of a vacuum
circuit. The objective: perfect interaction of the individual vacuum components.
02.05.020
Filters and parts
02.05.055
Suction cups
Schmalz provides solenoid valves for vacuum and compressed-air, manually
actuated vacuum and compressed-air valves as well as check valves and flow
resistors
02.05.073
Valves
03.07.003.01
Handling devices
03.07.005.01
Stacking devices
03.07.005.05
Equipment for palletizing
Product Details
02.05.004
JB TECNICS SAS
J. Schmalz GmbH
Fastenings
Mounting elements
Build your own individual suction-pad system! Everything - the holder, the spring
plunger and the suction pad - fits together, since they all come from the same
modular system.
02.05.020
Zone Artisanale en Grain
39360 Molinges
France
Phone
+33 3 84414200
Fax
+33 3 84424628
Internet address
www.groupejbt.com
E-Mail
jbtecnics@jbtecnics.com
Stand
Hall 01, C09 (Page 864)
Filters and parts
Filters and connections
Company News
The task of hoses, connectors, fittings and filter is to connect the vacuum from
one point to another. The enormous range of available components permits
tailor-made solutions.
02.05.055
Address
07/18/2013
JB TECNICS SAS
50 years
50 years
Suction cups
Vacuum gripping systems
Schmalz’s complex vacuum gripping systems let you implement decisive productivity increases during automated processes. The systems range from layer
and large-area vacuum gripping systems to ready-to-install vacuum suction spiders for use in all areas of automation.
© 2014 Messe Düsseldorf GmbH
367
© 2014 Messe Düsseldorf GmbH
368
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Product Overview
JB TECNICS SAS
JB TECNICS SAS
02.01.010
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.007
Plastics products and parts for electrical engineering
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
Parts made by injection moulding
PRODUCT INFORMATION:
- Research and development: consultancy and help in innovation
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- 2 000 sq. m of cleanrooms (ISO7)
- Specific equipment post injection
- Metrology department: 3D contact and video
- CAD and CAM
- Complete mechanical workshop: milling, EDM, high speed machining…
02.03.012
Plastics products and parts for medical engineering
02.04.003.01
Parts from standard plastics
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
02.03.002
Plastics products and parts for automotive
PRODUCT INFORMATION:
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.04.003.05
Technical Parts from Bulk Molding Compound / Sheet
Molding Compound
- Specific equipment post injection
02.05.024
Glass-fibre reinforced plastic parts (GRP)
- CAD and CAM
02.05.041
Membranes
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
02.05.075.01
Fibreglass-reinforced plastic parts
02.03.007
02.05.075.02
Other fibre-reinforced plastic parts
- Research and development: consultancy and help in innovation
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- 2 000 sq. m of cleanrooms (ISO7)
- Metrology department: 3D contact and video
- Complete mechanical workshop: milling, EDM, high speed machining…
Plastics products and parts for electrical engineering
PRODUCT INFORMATION:
- Research and development: consultancy and help in innovation
03.06.001
Injection and compression moulds
04.05
Subcontracting
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- 2 000 sq. m of cleanrooms (ISO7)
- Specific equipment post injection
- Metrology department: 3D contact and video
© 2014 Messe Düsseldorf GmbH
369
© 2014 Messe Düsseldorf GmbH
370
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- CAD and CAM
- Specific equipment post injection
- Complete mechanical workshop: milling, EDM, high speed machining…
- Metrology department: 3D contact and video
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- CAD and CAM
02.03.010
PRODUCT INFORMATION:
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- Research and development: consultancy and help in innovation
02.04.003.01
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
PRODUCT INFORMATION:
- 2 000 sq. m of cleanrooms (ISO7)
- Research and development: consultancy and help in innovation
- Specific equipment post injection
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- Metrology department: 3D contact and video
- 2 000 sq. m of cleanrooms (ISO7)
- CAD and CAM
- Specific equipment post injection
- Complete mechanical workshop: milling, EDM, high speed machining…
- Metrology department: 3D contact and video
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- CAD and CAM
02.03.011
PRODUCT INFORMATION:
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- Research and development: consultancy and help in innovation
02.04.003.02
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
PRODUCT INFORMATION:
- 2 000 sq. m of cleanrooms (ISO7)
- Research and development: consultancy and help in innovation
- Specific equipment post injection
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- Metrology department: 3D contact and video
- 2 000 sq. m of cleanrooms (ISO7)
- CAD and CAM
- Specific equipment post injection
- Complete mechanical workshop: milling, EDM, high speed machining…
- Metrology department: 3D contact and video
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- CAD and CAM
02.03.012
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
Plastics products and parts for aviation
Plastics products and parts for mechanical engineering
Plastics products and parts for medical engineering
PRODUCT INFORMATION:
- Complete mechanical workshop: milling, EDM, high speed machining…
Parts from standard plastics
- Complete mechanical workshop: milling, EDM, high speed machining…
Parts from engineering plastics
- Complete mechanical workshop: milling, EDM, high speed machining…
- Research and development: consultancy and help in innovation
02.04.003.03
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
PRODUCT INFORMATION:
- 2 000 sq. m of cleanrooms (ISO7)
- Research and development: consultancy and help in innovation
© 2014 Messe Düsseldorf GmbH
371
Parts from high performance thermoplastics
© 2014 Messe Düsseldorf GmbH
372
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
02.05.041
- 2 000 sq. m of cleanrooms (ISO7)
PRODUCT INFORMATION:
- Specific equipment post injection
- Research and development: consultancy and help in innovation
- Metrology department: 3D contact and video
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- CAD and CAM
- 2 000 sq. m of cleanrooms (ISO7)
- Complete mechanical workshop: milling, EDM, high speed machining…
- Specific equipment post injection
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- Metrology department: 3D contact and video
02.04.003.05
- Complete mechanical workshop: milling, EDM, high speed machining…
Technical Parts from Bulk Molding Compound / Sheet
Molding Compound
PRODUCT INFORMATION:
- Research and development: consultancy and help in innovation
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
Fibreglass-reinforced plastic parts
PRODUCT INFORMATION:
- 2 000 sq. m of cleanrooms (ISO7)
- Research and development: consultancy and help in innovation
- Specific equipment post injection
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- Metrology department: 3D contact and video
- 2 000 sq. m of cleanrooms (ISO7)
- CAD and CAM
- Specific equipment post injection
- Complete mechanical workshop: milling, EDM, high speed machining…
- Metrology department: 3D contact and video
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
02.05.024
- CAD and CAM
02.05.075.01
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
Membranes
- CAD and CAM
- Complete mechanical workshop: milling, EDM, high speed machining…
Glass-fibre reinforced plastic parts (GRP)
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
PRODUCT INFORMATION:
- Research and development: consultancy and help in innovation
02.05.075.02
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
Other fibre-reinforced plastic parts
PRODUCT INFORMATION:
- 2 000 sq. m of cleanrooms (ISO7)
- Research and development: consultancy and help in innovation
- Specific equipment post injection
- 70 injection machines from 15 to 600 Tons equipped of 6 axis Robots
- Metrology department: 3D contact and video
- 2 000 sq. m of cleanrooms (ISO7)
- CAD and CAM
- Specific equipment post injection
- Complete mechanical workshop: milling, EDM, high speed machining…
- Metrology department: 3D contact and video
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
- CAD and CAM
- Complete mechanical workshop: milling, EDM, high speed machining…
© 2014 Messe Düsseldorf GmbH
373
© 2014 Messe Düsseldorf GmbH
374
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- Global projects management (assembling, finishing, packaging, sterilization...)
and of their validations.
450Series box
Plastic turnover box
Jiangsu Lida Plastic Pallet Manufacturing Co., Ltd.
Address
No. 6 Chuangye Road, Economic
223800 Suqian City, Jiangsu Province
China, People’s Republic of
Phone
+86 527 84272379
Fax
+86 527 84272259
Internet address
www.jslida.com
E-Mail
marywonglida@126.com
Stand
Hall 08b, H59-15 (Page 890)
Product Overview
02.03.015
470 All-purpose basket
Plastic turnover basket
586Shift basket
Food basket
Jiangsu Lida Plastic Pallet Manufacturing Co.,...
Plastics products and parts for transport/packaging
Garbage can - 100L
Garbage can
Product Details
02.03.015
Jiangsu Lida Plastic Pallet Manufacturing Co.,...
Plastics products and parts for transport/packaging
12 bottles beer basket
Beer box
LD-1125 WJ
Plastic pallets
© 2014 Messe Düsseldorf GmbH
375
© 2014 Messe Düsseldorf GmbH
376
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Water box series - 300L
Product Overview
Water box
Jiangxi Aidmer Polymer
01.01.114
Polyvinylidene fluoride (PVDF)
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
Product Details
02.04.001.09
Jiangxi Aidmer Polymer
Address
Wanfu Economic Technological
332300 Jiujiang
China, People’s Republic of
Phone
+86 792 2837628
Fax
+86 792 2837559
Internet address
www.aidmerptfe.com
E-Mail
aidmer@aidmer.com
Stand
Hall 07.1, E43 (Page 886)
Jiangxi Aidmer Polymer
Semi finished products of polytetrafluorethylene
(PTFE)
AIDMER PTFE SHEETS / RODS / TUBING
Virgin PTFE SHEET: has excellent resistance to the
majority of chemicals and solvents and is capable of operating at high and low temperatures. It also has a very
low coefficient of friction and is commonly used in food
contact applications. It provides good thermal stability
and has good electrical properties, but is not suitable
for wear application and is difficult to bond.
Filled Ptfe Sheet: Teflon filled grades offer a range of materials that expand
on the properties of PTFE ,These properties can be improved with the addition
of a glass filler ; graphite filler;Carbon filler;Bronze filler. This filler improves
dimensional stability, raises the heat deflection temperature and improves creep
resistance.
2.Types
Company News
07/05/2013
Jiangxi Aidmer Polymer
1). PURE VIRGIN PTFE SHEET
2). FILLED PTFE SHEET WITH GRAPTHITE,GLASS FIBER,CARBON FIBER,BRONZE
ISO 9001 2008 CERTIFICATE
3. Characteristics:
JINAG XI AIDMER POLYMER PRODUCTS THE QUALITY
ARE BASED ON ISO9001 2008
• Outstanding chemical resistance
• Superb electrical insulating properties
PROIVDE MSDS, SGS TEST REPORT
• A wide working temperature range from 260°C down to liquid nitrogen temperatures (-260°C)
• And a very low coefficient of friction, resulting in unique non-stick behaviour
• High dielectric properties
© 2014 Messe Düsseldorf GmbH
377
© 2014 Messe Düsseldorf GmbH
378
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
PTFE ROD
• Non-toxic
Polytetrafluoethylene PTFE TUBING
AIDMER PTFE ROD
PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
Surf Technologies extrudes rod in all standard sizes
from 1/8 inch diameter up to 8 inches in diameter. The
molded ptfe rod can get to 16 inches.
Polytetrafluoethylene PTFE TUBING
Aidmer78-031 Extruded Ptfe Pipe
Aidmer78-032 Molded Ptfe Tube
Aidmer78-053 Filled Ptfe Tube
Extruded/Molded Ptfe Pipe has a wide range of practicable temperature from -180C~+260C and a wax-like
surface to which anything hardly sticks. Teflon Tube has the lowest coefficient of
friction of all known solid materials. Teflon Tube has the best electrical properties
of all plastic.
Filled Ptfe tube is made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass
Fiber, Graphite,Carbon Fiber, Bronze we can do.
PTFE Rod has a wide range of practicable temperature
from -180C~+260C and a wax-like surface to which anythings hardly sticks,Ptfe
rods has the lowest cofficient of friction of all known solid materials.Extursion
Teflon bar has the best electrical properties of all p lastic.
Note: All PTFE rods can be etched for bonding, and can be mounted on a plywood disk for less waste in machining. Also can be made with filled (reinforced)
PTFE to enhance the performance parameters of PTFE. Materials available for
reinforcement are Glass Fiber, Graphite, Bronze we can do.
Applications:
Generally used as machining stock for all kinds of chemical, electrical and
mechanical components where the outstanding performance characteristics of
PTFE are required. Various fillers are available to modify the properties of PTFE
to meet application requirements.
PTFE GASKET
PTFE GASKET
PTFE GASKET is chosen suspended aggregation teflon
resin shaped or cutting into porcessed.Teflon compared
with other plastics with a corrosion resistant chemical
characteristics Naiwen Merit.It has been widely used as
a sealed materials.
Specification:
Item Unit Range of work
Inter Ф mm 1~2000mm
Outer Ф mm 2~2000mm
Thickness mm 0.3~50mm
Filled Materials Graphite ,Glass Fiber , Carbron fiber , Bronze
© 2014 Messe Düsseldorf GmbH
379
© 2014 Messe Düsseldorf GmbH
380
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
5: Electrofusion machine up to 800mm
JiLin Songjiang smart joint Co. Ltd.
Address
Tiangang Economic Developing Region
132501 Jiaohe City, Jilin Province
China, People’s Republic of
Phone
+86 432 66976665
Fax
+86 432 66976664
Internet address
www.smartjoint.net
E-Mail
sales@smartjoint.net
Stand
Hall 07.2, D16 (Page 888)
Jing Mei Industrial Ltd.
Address
Flat D, 2/F., Waylee Industry Bldg., 38
Tsuen Wan, N.T., Hong Kong
China, Hongkong, Special Administrative Region
Phone
+852 24928211
Fax
Product Overview
JiLin Songjiang smart joint Co. Ltd.
02.01.010
Parts made by injection moulding
03.05.001
Hot-plate welding machines
Product Details
02.01.010
Internet address
www.jmi.com.hk
E-Mail
sales@jmi.com.hk
Stand
Hall 01, A25-5 (Page 864)
Product Overview
Jing Mei Industrial Ltd.
02.01.010
Parts made by injection moulding
02.02.002
Galvanization
JiLin Songjiang smart joint Co. Ltd.
Parts made by injection moulding
Smart Joint produces followed products:
Product Details
1: A complete range of HDPE electrofusion fittings (
Coupler up to 800mm& 36” IPS) ( Small Size Electrofusion Tapping Tee IPS&Metric )
02.01.010
Parts made by injection moulding
Our products
2: A complete range of HDPE butt fusion fittings (
Flange Stub up to 1200mm & 36” IPS, tee& elbow to
630mm, reducer to 1000mm)
A brilliant, robust chrome plated surface adds substantial value to a plastic product or component. At JMI, we
can plate to any reasonable specification on a large variety of plastic substrates. Our 18 electroplating lines
offer quick and efficient results.
3: A complete range of HDPE drainage fitting for
Kitchen and Toliet
We have also become experts in the environmentally
friendly, ”trivalent chrome” plating process. Recent ad-
4: Butt fusion machine up to 2000mm
© 2014 Messe Düsseldorf GmbH
Jing Mei Industrial Ltd.
381
© 2014 Messe Düsseldorf GmbH
382
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
vances in trivalent chrome introduces cost-effective special finishes for the sanitary industry. Virtually any chrome color or thickness is achievable thanks to the
dedication from our in-house master platers.
Our ability to offer a wide range of surface finishing techniques along with our
vertically integrated manufacturing services allows us to produce quality plastic
products at very competitive prices.
Our 240 injection molding machines are capable of delivering quality parts
quickly.
We are able to mold even the most complicated part. Insert molding and gas
assist molding introduces the opportunity for designers to pursue new forms that
were previously unattainable.
The combination of LSR (Liquid Silicon Rubber) and PBT in a 2 cavity mold can
introduce a new level of performance to your product category. LSR is certified
globally by WRAS for safe water consumption, does not degrade due temperature changes and is resistant to bacteria.
Our ability to offer a wide range of surface finishing techniques along with our
vertically integrated manufacturing services allows us to produce quality plastic
products at very competitive prices.
02.02.002
Galvanization
Our products
A brilliant, robust chrome plated surface adds substantial value to a plastic product or component. At JMI, we
can plate to any reasonable specification on a large variety of plastic substrates. Our 18 electroplating lines
offer quick and efficient results.
joke Folienschweißtechnik GmbH
Address
Asselborner Weg 14-16
51429 Bergisch Gladbach
Germany
Phone
+49 2204 839-0
Fax
+49 2204 839-13
Internet address
www.joke-fs.de
E-Mail
info@joke.de
Stand
Hall 03, E52 (Page 868)
Product Overview
We have also become experts in the environmentally
friendly, ”trivalent chrome” plating process. Recent advances in trivalent chrome introduces cost-effective special finishes for the sanitary industry. Virtually any chrome color or thickness is achievable thanks to the
dedication from our in-house master platers.
Our 240 injection molding machines are capable of delivering quality parts
quickly.
joke Folienschweißtechnik GmbH
02.02.005
Welding
03.03.011
Bag and sack making equipment
03.05.002
Heat impulse welding machines
We are able to mold even the most complicated part. Insert molding and gas
assist molding introduces the opportunity for designers to pursue new forms that
were previously unattainable.
The combination of LSR (Liquid Silicon Rubber) and PBT in a 2 cavity mold can
introduce a new level of performance to your product category. LSR is certified
globally by WRAS for safe water consumption, does not degrade due temperature changes and is resistant to bacteria.
© 2014 Messe Düsseldorf GmbH
383
© 2014 Messe Düsseldorf GmbH
384
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.02.005
joke Folienschweißtechnik GmbH
Welding
Company News
05/09/2013
Kamadur Industrial Knives B.V.
Introduction 2
Hand sealing devices CONIFORM
To be continued
These film sealing devices are used for rapid and simple sealing of film bags. They are available in two different sealing lengths: 220 mm and 300 mm. The sealing
time is continuously adjustable to allow sealing of the
most diverse types of thermoplastic film.
05/09/2013
The impulse is triggered by simply pressing the lever downwards.
Product Overview
The possible applications cover a wide area and range from contract packaging,
including household products and warehouse packaging.
03.10.006
Machine blades
02.05.033
Storage and transport containers
Introduction 1
To be continued...
Applications
Kamadur Industrial Knives B.V.
Contract packaging Warehouse packaging Household
The advantages at a glance
Product Details
simple control and handling wide range of applications usable for a wide variety
of film types rapidly replaceable push-fit bars and heating bands easy insertion
of the film bag contiuously adjustable sealing time
02.05.033
Kamadur Industrial Knives B.V.
Storage and transport containers
BIGBAGS / JUMBOBAGS / FIBC
Our state-of-the-art technology, we have taken product packaging to a new level! Providing sustainable packaging for
food grains, spices, agro products and bulk material you require bags that are cost effective and durable. No matter what
you’re looking to pack, our standard and customised packaging solutions not just protect your products, but hold every bit
of goodness together.
Kamadur Industrial Knives B.V.
Address
Jan van der Heydenstraat 80
2665 JB Bleiswijk
Netherlands
Phone
+31 88 5262300
Fax
+31 88 5262301
Internet address
www.kamadur.com
E-Mail
knives@kamadur.com
Stand
Hall 12, B35 (Page 906)
Our wide range of standard and customised packaging solutions enables us to
offer ample choices in colour, sizes, quantity and quality to choose from. Keeping your product safe and retaining its goodness could not be made easier!
FIBC/ Jumbo bags
Carry large and solid materials in our jumbo bags/ bulk bags with large storage
capacity.
Upanel / 4 Panel Bags
The standard four loop bag with carrying capacity of 500 to 2000 Kg.
Circular Type with Cross Corner Loops
© 2014 Messe Düsseldorf GmbH
385
© 2014 Messe Düsseldorf GmbH
386
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
Bag has loops stitched on the body of the main fabric, less stitches
08/21/2013
in the body.
Baffle Bag
FIBCs with baffles sewn inside the body, help the bag maintain the shape after
filling also.
Tunnel Lift Bag
With additional facility to lift the bag using Forklift. Has two tunnels specially
designed for the purpose.
Kase Equipment Corporation
Thermal Transfer Pail Labeler
Please come to our booth to see the new Thermal
Transfer Pail Labeler demonstrated. The Kase Equipment Thermal Transfer Decorating Machine applies labels via heat transfer on 1-7 gallon (3.4-25 liter) pails. It
can accomodate different bucket diameters,tapers and
heights. Change jobs in minutes, not hours.
Single Loop Bag / Two Loop Bags
Use for 500 to 1000 Kg, specifically for agricultural and food products.
Product Overview
Ventilated Big Bag
Kase Equipment Corporation
01.14.003
Printing inks
02.05.013
Printing blankets
03.04.001
Printing equipment for plastic and rubber products
Breathable bags that help in transportation of perishable products.
UN bags, Sift Proof bags
Special types of bags used for transportation of dangerous material.
Kase Equipment Corporation
Address
Kastilo Technische Gewebe GmbH
7400 Hub Parkway
44125 Valley View, OH
USA
Phone
+1 216 642-9040
Fax
+1 216 986-0678
Internet address
www.kaseequip.com
E-Mail
info@kaseequip.com
Stand
Hall 04, B56 (Page 870)
© 2014 Messe Düsseldorf GmbH
387
Address
August-Nagel-Str. 16
89079 Ulm-Einsingen
Germany
Phone
+49 7305 9690-0
Fax
+49 7305 9690-40
Internet address
www.kastilo.de
E-Mail
info@kastilo.de
Stand
Hall 07.1, D38 (Page 886)
© 2014 Messe Düsseldorf GmbH
388
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Katoplast AS
Product Overview
02.05.070
Kastilo Technische Gewebe GmbH
Product Details
02.05.070
Address
Flatebyveien 8D
1792 Tistedal
Norway
Phone
+47 69211000
Fax
+47 69211009
Internet address
www.katoplast.no
E-Mail
magic@katoplast.no
Stand
Hall 02, F16-4 (Page 866)
Separating foils
Kastilo Technische Gewebe GmbH
Separating foils
PTFE beschichtete Glasgewebe
PTFE-Glasgewebe und PTFE-Folien auch einseitig selbstklebend oder als Schweißband mit seitlichen Klebestreifen.
Anti-Haftbänder aus mehrlagigen PTFE- Glasgewebelaminaten mit verdickungsfreier Stufenverbindung.
Schweißbänder aus PTFE- beschichteten Glasgeweben mit Führungsprofil oder
Führungsnoppen.
Förderbänder aus offenmaschigen, luftdurchlässigen PTFE- beschichteten Glasoder Aramidgeweben
für den Transport von kleinen und/oder empfindlichen Produkten durch den
Schrumpftunnel.
Product Overview
02.01.010
Katoplast AS
Parts made by injection moulding
Product Details
Katoplast AS
Silikon-Glasgewebe als Vorhänge für den Ein- und Auslauf von Schrumpftunneln.
02.01.010
PTFE PRODUCTS
Products
PTFE/Fibreglass Fabrics and PTFE Film often one-side adhesive or as heat
sealer tape with adhesive strips at the sides.
Do you have new products or wish to make changes
to existing products? Are you looking for better technical solutions that make your products more competitive
and functional? Please contact us for a consultation.
Non-stick belts made of multi-ply laminated PTFE -Fibreglass Fabrics with special splice nearly thickening-free.
Heat sealer belts made of PTFE -Fibreglass Fabrics with guiding pins, knops or
profiles.
Open mesh conveyor belts made of PTFE -Fibreglass- and PTFE -Aramid Fabrics.
Parts made by injection moulding
We will assist you with every query.
Our wish is to assist you in developing your new products. Competence and
«know how» in mould making and production is renowned among our customers.
Our philosophy is to offer flexibility, speedy performance, efficient production and
excellent quality at the right price to our customers.
Silicone -Fibreglass Fabrics for shrink tunnel curtains.
When we are involved at a project early phase, we can achieve best results.
Then we may influence the shape, construction and choice of plastic material to
© 2014 Messe Düsseldorf GmbH
389
© 2014 Messe Düsseldorf GmbH
390
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
be used.
In 2006 we invested in Scandinavias first Watermelt installation. We started a
project with the handle to Husqvarnas electric powersaw. The project is now
completed, and the new handle has taken the old one’s place.
Product Overview
Khanna Polyrib Pvt. Ltd.
02.01.002
Products made by extrusion
Our wish is to assist you in developing your new products. Competence and
“know how” in mould making and production is renowned among our customers.
02.01.004
Products made by calendaring
Our philosophy is to offer flexibility, speedy performance, efficient production and
excellent quality at the right price to our customers.
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.02.006
Embossing
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.08
Semi finished products of polystyrene (PS)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Parts from engineering plastics
When we are involved at a project early phase, we can achieve best results.
Then we may influence the shape, construction and choice of plastic material to
be used.
In 2006 we invested in Scandinavias first Watermelt installation. We started a
project with the handle to Husqvarnas electric powersaw. The project is now
completed, and the new handle has taken the old one’s place.
Khanna Polyrib Pvt. Ltd.
Address
24/168 Birhana Road, P.O. Box 007
208 001 Kanpur
India
Phone
+91 512 3932800
Fax
+91 512 2352058
Internet address
www.polyrib.com
02.04.003.02
E-Mail
polyrib@rediffmail.com
Product Details
Stand
Hall 08a, B31 (Page 894)
02.01.007
Khanna Polyrib Pvt. Ltd.
Parts made by compression moulding
LDPE and HDPE/HMHDPE
LDPE (LOW DENSITY POLYTHYLENE)
It is more flexible than HDPE which makes it a good choice for prosthetic devices
and can be vacuum formed and in thermoformed.
© 2014 Messe Düsseldorf GmbH
391
© 2014 Messe Düsseldorf GmbH
392
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
HDPE/HMHDPE (HIGH DENSITY & HIGH MOLECULAR HIGH DENSITY POLYETHYLENE)
King Tech Mould Co.,Ltd
It is used in variety of application and industries where excellent impact even
at low temperature, high tensile strength, moisture absorption, chemical and
corrosion resistance properties are required.
Address
1F/E1 Building, New Sanyo Industrial
518126 Shenzhen
China, People’s Republic of
02.04.001.01
Phone
+86 755 86182410
ABS Sheets
Fax
+86 755 86182740
ABS Sheets (Acrylonitrile Butadiene Styrene) is the
widely used engineering thermo- plastic and is formed
by the polymerization of styrene and acrylonitrile on to thermoplastic rubber
which is then melt compounded with styrene acrtylonitrile. The combination of
the copolymers gives ABS excellent surface appearance, stronger, stiffer and
tougher than high impact polystyrene and is also superior to it in its resistance
to high temperatures and chemicals.
Internet address
www.kingtech-mould.com
E-Mail
pollykingtechmould@gmail.com
Stand
Hall 01, D07 (Page 864)
02.04.001.07
Company News
Semi finished products of acryl-nitrile-butadiene (ABS)
Semi finished products of polypropylene (PP)
05/30/2013
Polyrib polypropylene
Polyrib polypropylene is a crystalline polymer noted for
excellent chemical resistance. It is used extensively in
chemical processing, chemical storage, metal finishing, electroplating, galvanizing industry. It is also used to make engineering components such as nozzles,
impellers, pumps casing jigs & fixtures. It find extensive use in orthopaedic and
prosthetic devices and semi conductors and clean room industry. It is being
used to make components and consumer articles via vacuum and thermoforming process.
King Tech Mould Co.,Ltd
Welcome to visit KingTech at K trade fair 2013 during
16~23th of October,in Düsseldorf Germany!
KingTech Mould will attend K-fair 2013, the 19th International Trade Fair for
Plastics and Rubber, in Düsseldorf, Germany. We are pleased to welcome you
to meet with us 16 -23 of October 2013, in Messe Düsseldorf. KingTech will be
in booth 1D07, in Hall No.1.To schedule an appointment with one of our representatives, please contact your King Tech sales representative directly, or send
an email to info@kingtech-mould.com.K-fair is the world’s premier trade fair for
plastics and rubber - the industry meet and greet for innovation, information and
investment. For more details about K-fair 2013, please use the link below to
visit the K-online website.http://www.k-online.de/We are looking forward to seeing you in Düsseldorf!
Product Overview
02.03.003
© 2014 Messe Düsseldorf GmbH
393
King Tech Mould Co.,Ltd
Plastics products and parts for building applications
© 2014 Messe Düsseldorf GmbH
394
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
King Tech Mould Co.,Ltd
Product Overview
02.03.003
KIWO - KISSEL+WOLF GmbH
Plastics products and parts for building applications
01.08.001
Flock-adhesive
01.08.003
Copolyamid-adhesives mouldes
01.08.004
Copolyester-adhesives mouldes
01.08.006
Dispersion adhesives
01.08.007
Rubber to Metal Bonding Agents or Primers and
Bonding Agents for Rubber to Metal (bonding agent or
adhesive systems)
01.08.008
Pressure sensitive adhesives
01.08.011
Contact adhesives
01.08.012
Solvent-based adhesives
01.08.014
Plastisol adhesives
01.08.017
Hot melt adhesives
02.02.003
Printing
02.05.005
Flocking
Die casting
Besides tooling and moulding services, we also help
our customer manufacturing various die casting molds.
King Tech builds die-casts for Aluminum, Zinc and Copper alloy moulding. This is a way for us to fully take
advantage of our metal and engineering expertise and
truly embrace the full-service pledge.
Our excellence in the core competencies and with the service cycle completed
by these services, King Tech has gained great reputation among our customers
for our dedication, continuous improvement & innovation.
KIWO - KISSEL+WOLF GmbH
Address
In den Ziegelwiesen 6
69168 Wiesloch
Germany
Phone
+49 6222 578-0
Fax
+49 6222 578-100
Internet address
www.kiwo.de
E-Mail
adhesives@kiwo.de
Stand
Hall 05, A01 (Page 874)
Product Details
02.05.005
KIWO - KISSEL+WOLF GmbH
Flocking
MECOFLOCK D 340/1-02
Beflockungsklebstoff zur Herstellung von Flocktransfers
MECOFLOCK D 340/1-02 ist ein siebdruckfähiger, weiß eingefärbter, deckender
Klebstoff auf Dispersionsbasis und sehr gut geeignet zur Herstellung von Flocktransfers. Er verbindet sich ausgezeichnet mit dem Flockflor des Transfer-Flockpapiers
© 2014 Messe Düsseldorf GmbH
395
© 2014 Messe Düsseldorf GmbH
396
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
sowie mit dem aufgestreuten MECOMELT-Schmelzpulver. Bei Verarbeitung mit
MECOMELT 1795 F und MECOMELT 2595 G erhält man eine Waschbeständigkeit
bis 95 °C und chemische Reinigungsbeständigkeit. Bei Verarbeitung mit MECOMELT
2060 F ist die Waschbeständigkeit bis 60 °C gegeben, die chemische Reinigungsbeständigkeit bleibt erhalten.
- Oxygen Barrier
- Light Barrier
- Moisture Barrier
- No Label Look
- Ultra White
Korsini - SAF Ambalaj San. ve. Tic. A.S. Ege
Serbest Bölge Subesi
Address
- Metallic Ink
- Pasteurization
- Autoclave up to 120 degree
Camlik Sokak No:10
35410 Gaziemir, Izmir
Turkey
- Extra Large Size 800 x 1300 mm
- Hot and Cold Foil
Phone
+90 232 2513848
Fax
+90 232 2517327
Internet address
www.korsini-saf.com
E-Mail
info@korsini-saf.com
Stand
Hall 07.2, C07 (Page 888)
- Full UV Ice Cream
- Reverse Print
- Fluffy
- Scratch & Win
- Dishwashing
Product Overview
02.02.003
according to each and individual project requirement.
Korsini - SAF Ambalaj San. ve. Tic. A.S. Ege...
Printing
Product Details
02.02.003
- Sea Water Resistance
Korsini - SAF Ambalaj San. ve. Tic. A.S. Ege...
Printing
IN MOULD LABEL FOR INJECTION, BLOW AND
THERMOFORMING
Besides regular Consumer and Industrial IML Labels,
Korsini-Saf is the only Company in the World able
to supply Globally his Partners Off-Set, Rotogravure,
Flexo and Digital Printed Labels for:
© 2014 Messe Düsseldorf GmbH
397
© 2014 Messe Düsseldorf GmbH
398
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Koschaum GmbH
Address
Product Details
Spalter Str. 37-39
91183 Abenberg
Germany
02.05.005
Koschaum GmbH
Flocking
Industrial supplying
IMPROVING THE TRIED-AND-TESTED FURTHER,
FACING THE CHALLENGES OF NEW INDUSTRIAL
REQUIREMENTS INNOVATIVELY AND FULLFILLING
VERSATILE OPERATION PURPOSES INDIVIDUALLY
IS THE DAILY DRIVE BEHIND OUR TECHNOLOGY, PRODUCTION AND
SALES. WE PLACE THREE DECADES OF STEADILY GROWING KNOWHOW AT THE DISPOSAL OF OUR CUSTOMERS.
Phone
+49 9178 9989531
Fax
+49 9178 9989510
Internet address
www.koschaum.de
E-Mail
info@koschaum.de
MECHANICAL AND INDIVIDUAL
Stand
Hall 05, A01 (Page 874)
Each defined industrial task that is presented to the company is individually and
impartially evaluated in terms of its technical and economic viability.
Product Overview
01.14.001
Koschaum GmbH
Linings and coatings
Your requirements are precisely met when we flock foams, foils and structural
materials for optical, technical or insulating purposes, for example when it comes
to producing goods that are waterproof, fire-resistant or extremely abrasion resistant.
We laminate and coat a wide variety of materials, if necessary including plasma
pre-treatment of the surfaces in order to achieve or improve adhesive properties.
We also offer to provide a water repellent surface to prevent the absorption of
moisture. Surfaces can also be provided with an antibacterial finish.
02.01.005
Parts made by laminating
02.01.006
Parts made by mechanical treating
02.05.005
Flocking
02.05.007
Coatings
02.05.011
Sealings/Sealrings
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
Industrieanwendungen
BEWÄHRTES NOCH EIN WENIG BESSER MACHEN,
NEUEN INDUSTRIELLEN ANFORDERUNGEN INNOVATIV BEGEGNEN UND VIELFÄLTIGEN EINSATZZWECKEN INDIVIDUELL GERECHT WERDEN IST
DER TÄGLICHE ANTRIEB UNSERER TECHNIK, PRODUKTION UND UNSERES VERTRIEBS. DREI JAHRZEHNTE STETIG WACHSENDES KNOWHOW STELLEN WIR GANZ IN DEN DIENST UNSERER KUNDEN.
MASCHINELL UND INDIVIDUELL
Jede an das Unternehmen herangetragene industrielle Aufgabenstellung erfährt
eine individuelle und unvoreingenommene Bewertung im Hinblick auf die technische und wirtschaftliche Machbarkeit.
Bei der Beflockung von Schäumen, Folien, Strukturmaterialien für optische,
© 2014 Messe Düsseldorf GmbH
399
© 2014 Messe Düsseldorf GmbH
400
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
technische oder isolierende Zwecke werden Ihre Anforderungen exakt eingehalten, z.B. wenn es darum geht, die Ware wasserfest, feuerhemmend oder
extrem abriebresistent zu produzieren.
Wir laminieren und beschichten die verschiedensten Materialien, wenn nötig mit
Plasmavorbehandlung der Oberflächen zur Haftungsgewinnung oder -verbesserung.
Zusätzlich bieten wir das Hydrophobieren von Oberflächen zur Verhinderung
von Feuchtigkeitsaufnahme an. Auch eine antibakterielle Ausrüstung der Oberfläche ist möglich.
02.05.007
getestet sind. Ihren speziellen Anforderungen stellen wir uns dabei gern:
Ob optimiert für heißes und kaltes Verschweißen, UVbeständigkeit, Waschbarkeit,
mit antimikrobieller Ausrüstung ausgestattet, als Spezialfarbton oder als retikuliertes
Material mit verbesserten Eigenschaften zur Flüssigkeitsaufnahme.
Kremer-Kautschuk-Kunststoff GmbH & Co. KG
Formteile & Systeme
Coatings
Address
Hans-Streif-Str. 2-6
63628 Bad Soden-Salmünster
Germany
Phone
+49 6056 9154-0
Fax
+49 6056 9154-30
Internet address
www.kremer.de
E-Mail
team@kremer.de
Stand
Hall 06, A41 (Page 878)
Cosmetics
ANYTHING THAT IS SO CLOSE TO YOUR BODY
NEEDS TO BE COMPLETELY RELIABLE. OUR SPECIAL FOAMS FOR APPLICATION ARTICLES FROM
COSMETIC COMPOUNDS ARE DEVELOPED IN LINE
WITH YOUR REQUIREMENTS. WHETHER IT’S FOR APPLYING POWDER,
CREAMS, PASTES OR LIQUIDS – WE HAVE THE IDEAL FOAM FLOCK COMBINATION.
THE FOCUS ON THE PRODUCT
We offer a wide variety of different flocking qualities (in terms of quality, length
and titre) for any requirements. They have all been tested for their skin-friendly
properties. We will gladly address your specific requirements: optimised for
hot and cold welding, UV-resistance, washability, with an antimicrobial finish, in
a special shade or in a reticulated material with improved moisture absorption
properties.
Product Overview
Kremer-Kautschuk-Kunststoff GmbH & Co. KG...
Kosmetik
02.01.007
Parts made by compression moulding
WAS SO NAH AN UNSEREN KÖRPER KOMMT, MUSS
ZU 100% VERLÄSSLICH SEIN. UNSERE SPEZIALSCHÄUME
FÜR APPLIKATIONSARTIKEL VON KOSMETISCHEN
PRÄPARATEN WERDEN ENTLANG IHREN ANFORDERUNGEN ENTWICKELT. OB ZUM AUFTRAGEN VON PUDER,
CREMES, PASTEN ODER FLÜSSIGKEITEN – WIR HABEN DIE OPTIMALE
SCHAUM-FLOCK-KOMBINATION.
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
DAS PRODUKT IM BLICK
Für jeden Anspruch bieten wir Ihnen eine variantenreiche Auswahl verschiedenster Flockqualitäten (in Qualität, Länge, Titer), die alle auf Hautfreundlichkeit
© 2014 Messe Düsseldorf GmbH
401
© 2014 Messe Düsseldorf GmbH
402
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.003
Plastics products and parts for building applications
02.05.016
Bellows, expansible
02.03.004
Plastics products and parts for office equipment/
promotion
02.05.023
Casings and cabinets
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.03.005
Plastics products and parts for household/consumer
02.05.027
Rubber / plastics combinations
02.03.006
Plastics products and parts for electro-/household
appliance
02.05.028
Rubber / plastics / metal combinations
02.05.040
Packing rings
02.05.041
Membranes
02.05.058
Hoses
02.05.060
Cords
02.05.075.01
Fibreglass-reinforced plastic parts
Injection and compression moulds
02.03.007
Plastics products and parts for electrical engineering
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
03.06.001
02.04.003.01
Parts from standard plastics
Product Details
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.01.010
Kremer-Kautschuk-Kunststoff GmbH & Co. KG...
Parts made by injection moulding
Elastomer-Formteile
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
© 2014 Messe Düsseldorf GmbH
Elastomer-Formteile herzustellen und dabei für jede
Anforderung die Materialeigenschaften optimal zu nutzen,
erfordert in hohem Maße Kreativität und Know-how.
Bei Gummi-Metallverbindungen liegen die Vorteile klar
auf der Hand: weniger Arbeitsschritte und höhere Lebensdauer gegenüber mehreren Einzelteilen. Wir bieten unseren Kunden ein großes
Fachwissen und eine langjährige Erfahrung!
403
© 2014 Messe Düsseldorf GmbH
404
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Flüssigsilikon-Formteile
Flüssigsilikon, das High-Tech-Material, das den wachsenden Anforderungen an die Endeigenschaften der
Formteile gewachsen ist. Hohe Verarbeitungsgeschwindigkeiten
erlauben eine hervorragende Produktivität, ergänzt durch
einen hohen Automatisierungsgrad und geringe Produktionsschwankungen - Flüssigsilikon ist der Werkstoff für anspruchsvolle
Anwendungen02.04.003.01
02.05.058
Hoses
Schlauchringe
Durch exakte Schneidetechnologie entstehen präzise
Produkte, wie zum Beispiel Profilabschnitte und
Schlauchringe. Eine qualitativ hervorragende Alternative und Ergänzung zu formgerechten Dichtungen.
Parts from standard plastics
Stanzteile
Drehen, Fräsen, Bohren, Stanzen und Wasserstrahlschneiden sind nur einige Technologien der mechanischen Bearbeitung, die unsere Montage zu qualitativ
hochwertigen Systemen und Baugruppen unterstützt.
02.04.003.02
Mit der Erfahrung in den drei unterschiedlichen Fertigungsbereichen Elastomer, Thermoplast und Flüssigsilikon sind wir der ideale
Partner für Ihre anspruchsvollen Mehrkomponentenanwendungen und automatisierten Montagelösungen.
02.05.060
Cords
Profile
Parts from engineering plastics
Thermoplast-Formteile
Extreme Vielfältigkeit und nahezu unerschöpfliche Gestaltungsmöglichkeiten zeichnen Thermoplaste aus. Nur
durch das optimale Zusammenspiel von Maschine, Werkzeug
und Rohstoff sowie einer perfekten Beherrschung des
gesamten Verarbeitungsprozesses erreichen wir höchste Präzision und optimale Qualität der Produkte. Auf Wunsch werden diese
bedruckt, laserbeschriftet, verchromt oder zu fertigen Baugruppen weiterverarbeitet.
Fast endlos sind die Gestaltungsmöglichkeiten von Profilen: Hohlkammerprofile, Moosgummiprofile und –schläuche,
Rund- und Vierkantschnüre, Hart- und Weichkombinationen. Außerdem besteht die Möglichkeit, sie zu
bedrucken, zu beschriften oder selbstklebend auszustatten.
Eine besondere Stellung nehmen faserverstärkte Thermoplaste und MehrkomponentenVerbundteile ein: Gewichtsersparnis und hohe Temperaturbeständigkeit machen
sie unverzichtbar in vielen Bereichen, wie der Automobilindustrie.
02.05.027
Rubber / plastics combinations
Materialkombinationen
Die Gestaltungsmöglichkeiten sind unendlich:
Kunststoff-Metallverbindungen, Kunststoff-Kunststoffverbindungen,
Kunststoff-Flüssigsilikonverbindungen – zum Beispiel
für Membranen.
© 2014 Messe Düsseldorf GmbH
405
© 2014 Messe Düsseldorf GmbH
406
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Address
Coermühle 1
48157 Münster
Germany
wire screen cloth, etc.), eight of the KREYENBORG screen changers were compared to a currently available screen wheel filter which was in use on an identical
extrusion line. During the processing of various different materials, the amount
of material lost hourly due to the backflushing operation using the KREYENBORG backflush filter was reduced by half when compared to the screen wheel
filter. Furthermore it was possible to increase the fineness of the filter mesh.
Phone
+49 251 21405-0
The key to success of the system lies in the experience and technology used in
the design procedure together with the compatibility of the various components.
Fax
+49 251 21405-667
Internet address
www.kreyenborg.de
The customer is completely satisfied with the performance of the KREYENBORG screen changers which have been installed. Therefore, the food packaging film producer plans to install two more KREYENBORG backflush screen
changers during this year
E-Mail
info@kreyenborg.de
05/23/2013
Stand
Hall 09, A44 (Page 898)
Kreyenborg GmbH
Company News
05/23/2013
Kreyenborg GmbH
Screen changers for food packaging film production in
South America
The use of KREYENBORG machines in hazardous
areas
Since July 1, 2003, the European law directive 94/9/EG, better known as the
“ATEX-Directive”, has existed for explosion-protected electrical and mechanical
devices, components, and protective systems.
According to this directive, the operator of a plant is required to use only machines that are exclusively designed for these areas. He has to prove that only
devices specifically designed for this application are being used and that the
installation is safe.
Economic recycling is defined by recovering high quality products from contaminated material. After successful trials at a South American food packaging film
producer, KREYENBORG GmbH has equipped eight
of the film producer’s recycling lines with backflush
screen changers.
KREYENBORG has dealt with this type of protection long before the introduction
of the “ATEX-Directive” and has designed its machines and components of the
plastics industry for the use in hazardous areas in terms of the electrical design
and project planning. Since the introduction of the “ATEX-Directive”, KREYENBORG steadily expanded its competence with regard to the corresponding prescribed structural design and thus has over 10 years experience in this area.
Through the filtration process, PET flakes can be processed at a throughput
rate of 500 kg/h. Thereby, different qualities of material and varying degrees of
contamination pose a challenge for the screen changers.
The product range includes screen changers, gear pumps, and polymer valves,
which are designed in-house by KREYENBORG and optimized to the customer’s
individual needs.
The backflush screen changer has a self-cleaning function; this backflush procedure is initiated after achieving a certain pressure limit. In this process, a filter
screen is automatically moved out of the production position and backflushed by
the redirected melt stream. As a result, the contamination is removed from the
screen cavity and ejected via the drain channels. This is referred to as “the material lost due to the backflushing operation”. Following this, the filtration screen
is moved back in the production position.
KREYENBORG offers its customers an ”ATEX Checklist” that allows the customer to exactly describe the requirements for the particular machine right from
the start.
To give an estimate of the running costs (loss of material due to backflushing,
Through preventative work, all necessary measures can be taken for the elimina-
© 2014 Messe Düsseldorf GmbH
407
Following the submission of the classification of the individual hazardous area
by the customer, all necessary structural and instructional tasks are identified
through analysis of the ignition source.
© 2014 Messe Düsseldorf GmbH
408
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
tion of ignition sources, and a maximum explosion protection can be guaranteed.
Product Overview
05/23/2013
KREYENBORG’s V-Type screen changer proves its
quality/value in long-term use
In a recycling plant with strand pelletizing, the patented
KREYENBORG V-type screen changer with integrated
self-cleaning function of the screens displays its value
on a daily basis. On his production line, the client
mainly processes film remnants from PS and PP which
contain a high level of contamination. The system was
installed over three years ago and continues to perform without error. Despite
the high mechanical demands on the system technology, there are no signs of
fatigue after more than 51,000 backflush cycles. One cycle comprises the flushing of all four screen cavities, of which there are always at least three in production (KREYENBORG’s patented 75% technology). An overhaul due to rework or
wear of the seals is not necessary when using a KREYENBORG piston screen
changer because there is no leakage.
Kreyenborg GmbH
02.05.073
Valves
03.01.006
Screen changers
03.01.007
Melt filters
03.01.009
Recycling lines
03.08.006
Melt pumps
KTS Kunststoff Technik Schmölln GmbH
Address
The screen changer makes more than one hundred backflush cycles with the
same screen pack. Then the screens are changed for security reasons in order
to avoid fatigue of the mesh. The purpose of these preventive measures is to
prevent the bypass of dirt particles around the boundary edge of the screen
packs. If and when the screens need to be changed, the replacement of the
screen packs is very simple.
Altenburger Str. 72
04626 Schmölln
Germany
Phone
+49 34491 74122
Fax
+49 34491 27596
The V-type easily proves its process stability in a strand pelletizing line. Strand
breaks are things of the past when using the V-type, as the constant pressure
of this machine type offers unequalled opportunities.
Internet address
www.kts-schmoelln.de
E-Mail
kts@kts-schmoelln.de
Stand
Hall 08a, F11-8 (Page 894)
In recycling applications for medium to high viscosity materials in which economic filtration is required, the KREYENBORG V-type technology provides a
robust and durable solution for nearly all imaginable requirements. Furthermore
it provides for an extremely short payback time.
© 2014 Messe Düsseldorf GmbH
409
© 2014 Messe Düsseldorf GmbH
410
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.008
Product Overview
KTS Kunststoff Technik Schmölln GmbH
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.008
Plastics products and parts for data appliance
Plastics products and parts for data appliance
Telekommunications
production of the required tools in-house or use of
customer-provided tools serial production, pad printing
and assembly of the parts quality control according to
DIN EN ISO 9001:2000
02.03.012
Plastics products and parts for medical engineering
Medical engineering – catheter systems, cardiology
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.016
Plastics products and parts for optics/precision
engineering
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
03.06.001
Injection and compression moulds
consulting during the development of the article design
toolmaking first sample test report and measurement of
the moulded parts serial production quality control according to DIN EN ISO 9001:2000
02.03.016
Plastics products and parts for optics/precision engineering
Precision mechanics / Optics
Cooperation with the customers on
Product Details
02.03.002
development toolmaking first sample test report and
measurement of the moulded parts serial production of the plastic parts pad
printing quality control according to DIN EN ISO 9001:2000
KTS Kunststoff Technik Schmölln GmbH
Plastics products and parts for automotive
Automotive
development of the innovative adapter system CS
EASY in cooperation with Continental extensive preproduction simulation prototyping plastic material research first samples and pre-series serial production of
the moulded parts quality control according to DIN EN
ISO 9001:2000
© 2014 Messe Düsseldorf GmbH
411
© 2014 Messe Düsseldorf GmbH
412
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Kunststoff Helmbrechts AG
Address
Pressecker Str. 39
95233 Helmbrechts
Germany
Phone
+49 9252 709-0
Fax
+49 9252 709-199
Internet address
www.helmbrechts.de
E-Mail
adm@helmbrechts.de
Stand
Hall 08b, H79 (Page 890)
02.03.016
Plastics products and parts for optics/precision
engineering
02.05.017
Telecommunication equipment - parts
02.05.023
Casings and cabinets
02.05.051
Radio and phonographic equipment - parts
03.06.001
Injection and compression moulds
Product Details
02.03.006
Kunststoff Helmbrechts AG
Plastics products and parts for electro-/household appliance
Novelty: Capacitive sensors in 3D
Product Overview
Kunststoff Helmbrechts AG
Until now, circuit boards were above all one thing,
namely,flat, and as a result not particularly suitable
for playing an important future role for the car interior:
Button free control by means of capacitive fields on
three dimensionally shaped surfaces. Within the frame
of their joint development project MyWave, Kunststoff
Helmbrechts (KH) and MID-TRONIC now present a novelty: A 3D-component
with analog shaped circuit board for functional electronics.
02.01.010
Parts made by injection moulding
02.02.003
Printing
02.02.004
Type printing
02.03.002
Plastics products and parts for automotive
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.008
Plastics products and parts for data appliance
02.03.012
Plastics products and parts for medical engineering
© 2014 Messe Düsseldorf GmbH
413
The new MyWave-Demonstrator is lined up with all kinds of technical features:
After ignition it displays the room temperature in binary mode. A gentle touch
on the mode button and the color change in the “MyWave-3D” print is activated.
Running one’s finger along the printed volume control produces a rainbow effect.
Another touch on the mode button and the volume indicator comes into action
by means of LED as you already know from the 2D-MyWave.
In order to direct these functions, a further conventional, i.e. a flat circuit board,
has been placed in the 3D-MyWave. However, in later series production the
control electronics in the car interior will be located in a central unit outside of the
plastic component and the second circuit board will be omitted. The team from
MID-TRONIC in particular, performed pioneering work in the 3D-circuit board
field in that they developed a new 3D-automatic loader that is capable of affixing
electronic components such as diodes and resistors onto any desired shaped
circuit board. The next step within the co-operation will be the printing of the
© 2014 Messe Düsseldorf GmbH
414
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
conducting paths onto foil and to then form them. The goal is a three dimensional
sandwich of décor-/functional foil and back molded plastic.
For the current 3D-MyWave, KH subsidiary Foliotec once again took on the realization of the plastic components including decoration and In Mold Labelling
processing. A fade effect came into operation for the binary temperature gauge.
In geometrical terms a curvature of 18 mm was introduced to the component
surface. The new MyWave-3D offers KH customers the possibility of already
testing and applying future technology on their products today.
Kunststoff-Zentrum in Leipzig gGmbH
Address
Erich-Zeigner-Allee 44
04229 Leipzig
Germany
Phone
+49 341 4941500
Fax
+49 341 4941555
Internet address
www.kuz-leipzig.de
E-Mail
info@kuz-leipzig.de
Stand
Hall 08a, F11-2 (Page 894)
Company News
15.07.2013
likationszentrum gebündelt. Zielstellung ist eine breite Entwicklung neuer Produkte, Verfahren und Technologien. Das MiKA versteht sich in erster Linie als
Forschungs- und Entwicklungspartner für alle Branchen, in denen mikrokunststofftechnische Lösungen gefordert sind. Von der Idee bis zur Marktreife entwickelt das MiKA mit und für seine Partner Lösungen entlang der gesamten
Prozesskette. Das beginnt mit Machbarkeitsstudien und führt bis zur Begleitung
in die Serienproduktion.
Höchste Präzision verspricht die umfangreiche Ausstattung des MiKA. Dazu
zählen fünf Mikrospritzgießmaschinen, zwei Kleinstspritzgießmaschinen, eine
Ultraschall- sowie Heißprägeanlage für Mikrokunststoffteile, variable Verpackungsund Montageautomatisierungen sowie Prüf- und Messplätze für Mikroformteile.
Reinraumbedingungen der Klasse ISO 7 gestatten die Bearbeitung anspruchsvoller
Aufgaben z.B für Medizintechnik, Sensorik oder Optik.
Mit Formteilgewichten von 1 mg bis 10.000 mg wird ein breites Spektrum unterschiedlichster Teileanforderungen bedient. Umfangreiche Erfahrungen in
1K- oder 2K-Technik, mit Einlegeteilen im vertikalen Mikrospritzguss oder mit
den unterschiedlichsten Materialien ermöglichen anwendungsgerechte Lösungen auf höchstem Niveau. Mikrostrukturierungsverfahren von Kunststoffoberflächen komplettieren das breite Technologiespektrum.
DiagBes V6.0 - Software mit artikelbezogener Fehleranalyse
Auf dem KuZ-Messestand wird erstmals die neueste Version der Fehlerdiagnoseund -beseitigungssoftware DiagBes präsentiert. Die Besucher können das Programm für die systematische Beseitigung von Qualitätsmängeln beim Spritzgießen,
in der Extrusion und PUR-Verarbeitung live auf dem Messestand testen. Neu
ist die artikel- bzw. artikelgruppenbezogene Fehlererfassung mit entsprechender statistischer Auswertung. Die Einbindung firmenspezifischer Dokumente ermöglicht eine bessere Integration von DiagBes V6.0 in betriebliche Abläufe.
Kunststoff-Zentrum in Leipzig gGmbH
Besuchen Sie das KuZ in Messehalle 8a auf dem GKV-Plaza Stand-Nummer
F11-2.
MiKA – Applikationszentrum für
Mikrokunststofftechnologien am KuZ
High-Tech für Mikrokunststoff-Anwendungen
Die Kunststoff-Zentrum in Leipzig gGmbH (KuZ) stellt
auf der K 2013 erstmalig ihr neues Applikationszentrum für Mikrokunststofftechnologien – MiKA – der Öffentlichkeit vor. Das KuZ ist seit mehr als 15 Jahren
Spezialist auf dem Gebiet der Mikrokunststofftechnologien. Mit dem MiKA hat es seine Mikro-Kompetenzen in einem neuen App-
© 2014 Messe Düsseldorf GmbH
415
© 2014 Messe Düsseldorf GmbH
416
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Aufgaben z.B für Medizintechnik, Sensorik oder Optik.
Product Overview
Kunststoff-Zentrum in Leipzig gGmbH
02.01.010
Parts made by injection moulding
02.03.012
Plastics products and parts for medical engineering
02.03.016
Plastics products and parts for optics/precision
engineering
02.05.045
Micro parts
04.06
Science and consulting
Mit Formteilgewichten von 1 mg bis 10.000 mg wird ein breites Spektrum unterschiedlichster Teileanforderungen bedient. Umfangreiche Erfahrungen in
1K- oder 2K-Technik, mit Einlegeteilen im vertikalen Mikrospritzguss oder mit
den unterschiedlichsten Materialien ermöglichen anwendungsgerechte Lösungen auf höchstem Niveau. Mikrostrukturierungsverfahren von Kunststoffoberflächen komplettieren das breite Technologiespektrum.
Kuraray Europe GmbH
Address
Philipp-Reis-Str. 4
65795 Hattersheim
Germany
Phone
+49 69 30585300
Fax
+49 69 30585399
Internet address
www.kuraray.eu
MiKA – Applikationszentrum für Mikrokunststofftechnologien am KuZ
E-Mail
info@kuraray.eu
Die Kunststoff-Zentrum in Leipzig gGmbH (KuZ) stellt auf der K 2013 erstmalig ihr neues Applikationszentrum für Mikrokunststofftechnologien – MiKA – der
Öffentlichkeit vor. Das KuZ ist seit mehr als 15 Jahren Spezialist auf dem
Gebiet der Mikrokunststofftechnologien. Mit dem MiKA hat es seine MikroKompetenzen in einem neuen Applikationszentrum gebündelt. Zielstellung ist
eine breite Entwicklung neuer Produkte, Verfahren und Technologien. Das MiKA
versteht sich in erster Linie als Forschungs- und Entwicklungspartner für alle
Branchen, in denen mikrokunststofftechnische Lösungen gefordert sind. Von
der Idee bis zur Marktreife entwickelt das MiKA mit und für seine Partner Lösungen entlang der gesamten Prozesskette. Das beginnt mit Machbarkeitsstudien
und führt bis zur Begleitung in die Serienproduktion.
Stand
Hall 07a, D06 (Page 880)
Product Details
02.05.045
Kunststoff-Zentrum in Leipzig gGmbH
Micro parts
MiKA – Applikationszentrum für Mikrokunststofftechnologien
High-Tech für Mikrokunststoff-Anwendungen
Höchste Präzision verspricht die umfangreiche Ausstattung des MiKA. Dazu
zählen fünf Mikrospritzgießmaschinen, zwei Kleinstspritzgießmaschinen, eine
Ultraschall- sowie Heißprägeanlage für Mikrokunststoffteile, variable Verpackungsund Montageautomatisierungen sowie Prüf- und Messplätze für Mikroformteile.
Reinraumbedingungen der Klasse ISO 7 gestatten die Bearbeitung anspruchsvoller
© 2014 Messe Düsseldorf GmbH
417
Product Overview
Kuraray Europe GmbH
01.01.003
Acrylic glass (s. PMMA)
01.01.009
Barrier plastics
01.01.010.02
Bioplastics, Renewable based
01.01.010.03
Bioplastics, biologically degradable
© 2014 Messe Düsseldorf GmbH
418
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.01.017
Compounds (Polymer blends)
01.05.004
Butadiene rubber (BR)
01.01.030
Ethylene/vinyl alcohol copolymers (E/VAL)
01.05.010
Cis-01,04-polybutadiene (BR)
01.01.032
Granulates
01.05.011
Cis-01,04-polyisoprene (IR)
01.01.035
Optical polymers
01.05.013
Ethylene/propylene terpolymers (EPDM)
01.01.043
Polyamides blends
01.05.026
Styrene/butadiene rubber (SBR)
01.01.088
Polymethylmethacrylate (PMMA) and copolymers (s.
acrylic glass)
01.06.011
Polyvinyl alcohol fibres
01.08.007
01.01.101
Polyvinyl acetal (PVAL)
Rubber to Metal Bonding Agents or Primers and
Bonding Agents for Rubber to Metal (bonding agent or
adhesive systems)
01.01.103
Polyvinyl alcohol (PVAL)
01.08.008
Pressure sensitive adhesives
01.08.017
Hot melt adhesives
01.09.026
Polyvinyl alcohols (PVAL)
01.09.027
Polyvinyl butyrals
01.10.002
Additives, other
01.10.008
Aluminium powders/ -pastes
01.10.024
Binders
01.10.059
Adhesives
01.01.115
Prepregs, thermoplastic
01.01.118
Impact modifier
01.02.008.01
Compounds of styrenic block copolymers (SEBS,
SBS, SIS, TPE-S)
01.02.008.02
Styrenic block copolymers SEBS, SBS, SIS, TPE-S
(pure polymers)
01.02.012
SEBS-Blockcopolymer
01.02.013
TPV-thermoplastic vulcanised material
01.02.014
Other thermoplastic elastomers
© 2014 Messe Düsseldorf GmbH
419
© 2014 Messe Düsseldorf GmbH
420
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.10.126
Plasticiser
01.12.005
Self-reinforcing fibres
Product Details
02.01.001
Kuraray Europe GmbH
Parts made by blow moulding
®Mowiflex TC
01.13.018
Diole
01.13.036
Polymerization auxiliaries
01.13.038
Polyols
01.13.040
Raw materials
01.14.002
Decorative films
01.14.003
Printing inks
01.14.011
Anticorrosive effect
01.14.012
Paints, coatings
01.14.024
Composite materials
02.01.001
Parts made by blow moulding
02.01.002
Products made by extrusion
02.01.010
Parts made by injection moulding
02.03.013
Plastics products and parts for furniture appliances
02.04.002
Films
02.05.007
Coatings
Mowital G grades can be burned out without residue. Hence they are suitable
as a temporary binder for e.g. powder-injection moulding processes.
02.05.068
Technical films
Since Mowital G is compatible with various plastics, such as PMMA, PA, PVC,
ABS, or TPU, it is especially valuable for applications in masterbatch formulations. Beside this, Mowital G grades can be used as additives for thermoplastic
®Mowiflex TC is a novel thermoplastic compound, especially designed to meet
the requirements of thermoplastic processing. It can be processed using conventional plastic processing technology, such as blown and flat film extrusion
as well as injection moulding. At the same time, ®Mowiflex TC has all the advantageous properties of polyvinyl alcohol (PVA): It is soluble in water, forms
clear and glossy films and shows high tensile strength. ®Mowiflex TC can be
processed as a single compound or as an additive to standard plastics such
as PA and it allows for blow up ratios of up to 1:8. In contrast to PVA, it does
not have to be pre-treated before thermoplastic processing. It is delivered as a
ready-to-use product containing all the ingredients needed. The properties of
the ®Mowiflex TC compound can be well adjusted to the requirements of the
desired application. Materials produced with ®Mowiflex TC provide excellent
weldability and bonding, are easily printable and have a low electrostatic surface charge. Additionally, the compound is colourable, which makes it possible
to process ®Mowiflex TC as a highly concentrated masterbatch. Due to its excellent water solubility, ®Mowiflex TC can be used as a temporary binder as
well.
02.01.002
© 2014 Messe Düsseldorf GmbH
Products made by extrusion
Mowital G
®Mowital G
Polymers of the ®Mowital G series are amorphous thermoplastic polymers which
are provided as granules with low residual water content (<0.5 weight-%).
421
Mowital G grades are ideal both as a binding agent as well as dispersant. It
can be used in varnishes and inks and it predestine them for successful use as
dispersing agent for masterbatches or the colouring of polymers. The chemical
structure provides a semipolar character of Mowital G enabling the usage as
a compatibilizer for colour pigments, inorganic fillers, like metal oxide or metal
particles as well as carbon black. Mowital G is colourless, transparent, and
lightfast. These properties make them the preferred polymer for colour-neutral
formulations with high colour-purity and/or transparency.
© 2014 Messe Düsseldorf GmbH
422
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
compounds and thermoplastic elastomers as adhesion modulator, e.g. for bonding of polymeric compounds to glass, metal and ceramic substrates.
compounds and thermoplastic elastomers as adhesion modulator, e.g. for bonding of polymeric compounds to glass, metal and ceramic substrates.
®Mowiflex TC
®Mowiflex TC
®Mowiflex TC is a novel thermoplastic compound, especially designed to meet
the requirements of thermoplastic processing. It can be processed using conventional plastic processing technology, such as blown and flat film extrusion
as well as injection moulding. At the same time, ®Mowiflex TC has all the advantageous properties of polyvinyl alcohol (PVA): It is soluble in water, forms
clear and glossy films and shows high tensile strength. ®Mowiflex TC can be
processed as a single compound or as an additive to standard plastics such
as PA and it allows for blow up ratios of up to 1:8. In contrast to PVA, it does
not have to be pre-treated before thermoplastic processing. It is delivered as a
ready-to-use product containing all the ingredients needed. The properties of
the ®Mowiflex TC compound can be well adjusted to the requirements of the
desired application. Materials produced with ®Mowiflex TC provide excellent
weldability and bonding, are easily printable and have a low electrostatic surface charge. Additionally, the compound is colourable, which makes it possible
to process ®Mowiflex TC as a highly concentrated masterbatch. Due to its excellent water solubility, ®Mowiflex TC can be used as a temporary binder as
well.
®Mowiflex TC is a novel thermoplastic compound, especially designed to meet
the requirements of thermoplastic processing. It can be processed using conventional plastic processing technology, such as blown and flat film extrusion
as well as injection moulding. At the same time, ®Mowiflex TC has all the advantageous properties of polyvinyl alcohol (PVA): It is soluble in water, forms
clear and glossy films and shows high tensile strength. ®Mowiflex TC can be
processed as a single compound or as an additive to standard plastics such
as PA and it allows for blow up ratios of up to 1:8. In contrast to PVA, it does
not have to be pre-treated before thermoplastic processing. It is delivered as a
ready-to-use product containing all the ingredients needed. The properties of
the ®Mowiflex TC compound can be well adjusted to the requirements of the
desired application. Materials produced with ®Mowiflex TC provide excellent
weldability and bonding, are easily printable and have a low electrostatic surface charge. Additionally, the compound is colourable, which makes it possible
to process ®Mowiflex TC as a highly concentrated masterbatch. Due to its excellent water solubility, ®Mowiflex TC can be used as a temporary binder as
well.
02.01.010
02.03.013
Parts made by injection moulding
Mowital G
Plastics products and parts for furniture appliances
AMARETTA High-grade man-made leathers
®Mowital G
Polymers of the ®Mowital G series are amorphous thermoplastic polymers which
are provided as granules with low residual water content (<0.5 weight-%).
Mowital G grades are ideal both as a binding agent as well as dispersant. It
can be used in varnishes and inks and it predestine them for successful use as
dispersing agent for masterbatches or the colouring of polymers. The chemical
structure provides a semipolar character of Mowital G enabling the usage as
a compatibilizer for colour pigments, inorganic fillers, like metal oxide or metal
particles as well as carbon black. Mowital G is colourless, transparent, and
lightfast. These properties make them the preferred polymer for colour-neutral
formulations with high colour-purity and/or transparency.
Made of microfiber, the man-made leather AMARETTA is
used in high fashion apparel such as coats and jackets, and
is highly regarded in the marketplace. It is also used to cover
sofas and in other interior furnishing applications, and has attracted notice in the field of car seat covers. Kuraray is the
top manufacturer of man-made leathers, and is working to
expand this market.
Applications:
Premium clothing Interior furnishings Car seat covers
Mowital G grades can be burned out without residue. Hence they are suitable
as a temporary binder for e.g. powder-injection moulding processes.
Since Mowital G is compatible with various plastics, such as PMMA, PA, PVC,
ABS, or TPU, it is especially valuable for applications in masterbatch formulations. Beside this, Mowital G grades can be used as additives for thermoplastic
© 2014 Messe Düsseldorf GmbH
423
© 2014 Messe Düsseldorf GmbH
424
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
CLARINO Man-made leathers
Bonding of various metals
Multi-layer composites
Supple, lightweight, and easy to care for, CLARINO is
used in ladies’ and gentlemen’s shoes, sports shoes,
bags, and many other products. In the field of sporting
goods, where strength and functionality are required, it
is used in such items as shoes, balls, and gloves. Kuraray has recently developed a new material, PARCASSIO, incorporating some of the processes used on natural leather. PARCASSIO offers better air and moisture permeability than earlier
man-made leathers, and Kuraray is working to expand this market.
Applications:
ladies’ and gentlemen’s shoes, sports shoes bags and school bags sporting
goods (basketball, volleyball, gloves, etc.)
02.04.002
Wood laminates
Bonded honeycomb sandwich structures made from different substrates
SEPTON (TM) Q Film (Developing grade)
High Performance Thermoplastic Elastomer Film
SEPTON Q Film (Developing grade)
SEPTON Q film has good abrasion resistance and good mechanical properties, and it has lightweight, good hydrolysis resistance and weather resistance.
The base of the SEPTON Q film is an alloy of SEPTON Q series
and PMMA.
Films
VECSTAR™ Liquid crystalline polymer film
Mowital LP BF
Mowital® LP BF - plasticiser-free PVB Thin films
VECSTAR™ Liquid crystalline polymer film
Mowital® LP BF is a novel plasticiser-free polyvinyl butyral (PVB) film in the
50-250 µm range.
Advantages of this new form of PVB:
Roll-to-roll lamination processes
Multi-layer structures comprising different substrates
Using polyarylate liquid crystalline polymer as a raw
material, Kuraray has developed the new, high-performance
film. Its extremely low water absorption means that it is
virtually unaffected by water, and its electrical characteristics and dimensional stability are excellent. It is being used in the rapidly
advancing circuit board field as a next-generation product.
Uniform application thanks to defined thickness of layers
“HS film” (tentative name)
Solvent and dust-free application
“HS film” (tentative name)
Low odour or odour-free processing
Non-toxicLong shelf life and uncomplicated logistics (e.g. refrigeration is not
necessary)
Laminates and layered structures can be produced from a variety of different
substrates, e.g. glass, wood, metals, ceramics, etc.
They are then laminated under pressure at elevated temperatures, resulting in
compact composites with excellent adhesion, for applications including:
Acrylic film is used as base film of decoration film for automotive, electronics
and construction etc, and front film of solar cell, base film of display and so
on, using excellent transparency, high hardness, superior weatherability, easy
processability and low birefringence properties.
“IT film” (tentative name)
“IT film” (tentative name)
Glass bonding, e.g. for design applications
Good for metal finished decoration film by Smoother surface, less whitening
Fibreglass laminates
Acrylic film is used as base film of decoration film for automotive, electronics
Laminates with metal film or metal sheet, e.g. aluminium or copper
© 2014 Messe Düsseldorf GmbH
Good for some decoration film by better anti-sunscreen properties.
425
© 2014 Messe Düsseldorf GmbH
426
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
and construction etc, and front film of solar cell, base film of display and so
on, using excellent transparency, high hardness, superior weatherability, easy
processability and low birefringence properties.
02.05.007
02.05.068
Technical films
KURARISTER™ retortable transparent high barrier
films
Coatings
KURARISTER™ retortable transparent high barrier films
Kuraray Liquid Rubber IR / BD
KURARISTER™ is a retortable high barrier and transparent film made exclusively by Kuraray Co. Ltd. of
Japan. Used notably for stand-up pouches or lid film,
its high performance offers a clear alternative to aluminium.
- LIR / LBR is a viscous liquid rubber based on isoprene
and/or butadien, which was originally synthesized by
Kuraray Co., Ltd.
- LIR / LBR is used as performance improver for Hot Melts and PSA
Thanks to its polymeric barrier coating, KURARISTER has excellent flex-crack
and pinhole resistance, and is compatible with metal detectors. The barrier coating can be easily reverse printed with eye-catching graphics, with no effect on
the barrier properties.
- LIR/LBR has a function as a ”Reactive plasticizer”. In terms of function as a
”Plasticizer”, LIR/LBR is the rubber with the highest molecular weight among
materials which have plasticizing function. In terms of function as a ”Reactive”,
it is ”vulcanizable”. LIR / LBR is co-vulcanizable with solid rubber such as NR,
SBR, BR and EPDM using sulfur or peroxide.
KURARISTER™ CF is a 12µm polyester film, coated with a special barrier layer
developed by Kuraray. The thin but extremely durable coating layer displays
gas-barrier properties that are significantly better than standard PET film before
and after retort. Using the latest cutting-edge KURARISTER™ technology, CF
also provides excellent water vapour barrier performance.
-LIR / LBR is crosslinkable by reaction of its functional groups using metal compounds, epoxy compounds, isocyanate compounds, amine compounds and is
crosslinkable by UV radiation.
KURARISTER™ C is also based on a 12µm polyester film, coated with a special
barrier layer developed by Kuraray. Gas barrier performance is significantly better than standard PET film before and after retort, but with similar water vapour
barrier performance.
- LIR / LBR is colorless, transparent and almost completely odorless.
Mowital / Pioloform
Mowital / Pioloform – individualist with universal character
Under the trademark Mowital and Pioloform, Kuraray Europe GmbH (KEG) markets a wide range of different polyvinyl butyrals. Mowital has excellent adhesion
and film-forming properties, high binding power and outstanding optical transparency. In addition, it is soluble in many organic solvents and can be combined
with many different resins and reaction partners.
Thanks to its excellent thermoplastic properties Mowital can be used in standard plastics procedures such as extrusion and injection moulding. It is also
an essential constituent of lightfast, highly transparent, elastic and tear-proof
films. When pressed between two panes of glass it creates fracture-resistant
and shatterproof laminated safety glass used mainly in the building and automobile industries.
© 2014 Messe Düsseldorf GmbH
427
KURARISTER™ N is a 15µm oriented polyamide (OPA) film, coated with a special barrier layer developed by Kuraray. The thin but extremely durable coating
layer has gas barrier properties that are significantly better than standard OPA
film before and after retort. Using KURARISTER™ N’s OPA-like mechanical
strength, it is possible to make two-ply stand-up pouch structures, saving costs.
The resulting easy-to-print high barrier pouch keeps its transparency and barrier
properties even after high-temperature sterilisation.
Though not an EVOH barrier product, KURARISTER™ is promoted in Europe/Middle East/Africa and the Americas by the EVAL™ EVOH Business Unit.
KURARISTER™ is a registered trademark of Kuraray Co. Ltd.
© 2014 Messe Düsseldorf GmbH
428
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
LEGENDA® - Transparent plastic film with micro
structures
advancing circuit board field as a next-generation product.
“HS film” (tentative name)
LEGENDA® is produced with special micro-structures
on transparent plastic film. And its size of the microstructures pattern on LEGENDA® is a micron order.
LEGENDA® has below features.
“HS film” (tentative name)
Good for some decoration film by better anti-sunscreen properties.
Kuraray molds micro-structures on the surface of transparent plastic film. Especially, it is high productivity and high transcriptional ratio to utilize photo-curable
resin
Acrylic film is used as base film of decoration film for automotive, electronics
and construction etc, and front film of solar cell, base film of display and so
on, using excellent transparency, high hardness, superior weatherability, easy
processability and low birefringence properties.
- Visible to Various Lighting-Patterns even if close distance
“IT film” (tentative name)
In the case of conventional film with large structure, people can recognize various lighting-patterns when LED light source is sufficiently separated from it.
However, in the case of LEGENDA®, people don’t need distance film to LED.
Therefore, every customer who uses LEGENDA® is able to actualize their systems or units downsizing.
“IT film” (tentative name)
- Deformation to Complex Three-Dimensional Rounded Surface
LEGENDA® can be formed by second-processing, for instance vacuum molding. Light-patterns in the both cases of flat film and three-dimensional forming
products should be possible.
Good for metal finished decoration film by Smoother surface, less whitening
Acrylic film is used as base film of decoration film for automotive, electronics
and construction etc, and front film of solar cell, base film of display and so
on, using excellent transparency, high hardness, superior weatherability, easy
processability and low birefringence properties.
Kyoraku Co., Ltd
- Size: Width 300mm and Length 500mm
Please cut it down of yourself by scissors, cutter-knife, Thompson cutting, Laser
cutting and so on.
Address
2-3-10, Kawaramachi, Chuo-ku
541-0048 Osaka
Japan
Phone
+81 6 62031301
Fax
+81 6 62031309
Internet address
www.krk.co.jp
Applications
- LED Illuminations
- Optical Film for Flat Panel Display
- Amusement Machine
- Toys and Games
VECSTAR™ Liquid crystalline polymer film
E-Mail
VECSTAR™ Liquid crystalline polymer film
Using polyarylate liquid crystalline polymer as a raw
material, Kuraray has developed the new, high-performance
film. Its extremely low water absorption means that it is
virtually unaffected by water, and its electrical characteristics and dimensional stability are excellent. It is being used in the rapidly
© 2014 Messe Düsseldorf GmbH
429
Stand
Hall 16, F74 (Page 914)
© 2014 Messe Düsseldorf GmbH
430
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
attachment space
Product Overview
Kyoraku Co., Ltd
�Foam blow product lighter compared to solid duct
�Condensation minimized by improved insulation
02.01.001
Parts made by blow moulding
02.01.009
Parts made by foaming
02.03.002
Plastics products and parts for automotive
�Airconditioning unit output reduced contributing to better gas mileage�
Product Details
02.01.001
�Easily recycled as it is made by single material
2)Energy absorber pad(EA Pad) within door trim
�Cost reducttion possible compared to urethane�foam, polypropylene foam
Kyoraku Co., Ltd
�Quality equal to current product (confirmed by CAE analysis and impact tester)
�Easily recycled as it is same material as door trim
Parts made by blow moulding
�Flexible forming enables downsizing of parts
Advanced Blow-molding
3)Cargo space board
More lightness and low cost are pursured in blowmolding by comparison with the conventional method
and materials of our new products.
�Cost, VOC reduction possible by simultaneously molding and applying fabric
�Improved design with high rigidity of inner rib
1)Blow molded Foamed Duct
�High flexibility in design
2)Energy absorber pad(EA Pad) within door trim
�Secondary process reduced as hinge shape is molded in one
3)Cargo space board(FLP Lite)
�We have also Lighter FLP Lite and FLP Lite S
02.01.009
Parts made by foaming
Lenzing Plastics GmbH & Co. KG
Blow molded Foamed Duct
Address
Werkstr. 2
4860 Lenzing
Austria
Phone
+43 7672 7012851
Fax
+43 7672 9182851
Internet address
www.lenzing-plastics.com
Autoparts by Kyoraku’s Advanced Blow-molding
E-Mail
plastics@lenzing-plastics.com
1)Blow molded Foamed Duct
Stand
Hall 05, F30-7 (Page 874)
*Cost reduction through thermal insulation-less and/or
reduced attachment space
*Foam blow product lighter compared to solid duct
*Condensation minimized by improved insulation �Airconditioning unit output reduced contributing to better
gas mileage)
*Easily recycled as it is made by single material
02.03.002
Plastics products and parts for automotive
�Cost reduction through packing-less and/or reduced
© 2014 Messe Düsseldorf GmbH
431
© 2014 Messe Düsseldorf GmbH
432
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Verstärkungsfolien zur Dämmstoffkaschierung
Product Overview
Lenzing Plastics GmbH & Co. KG
02.01.002
Products made by extrusion
02.01.005
Parts made by laminating
02.03.003
Plastics products and parts for building applications
02.03.012
Plastics products and parts for medical engineering
02.04.002
Films
Wir stellen innovative Produkte für die Bauwirtschaft
her:
Gewebe und Verbunde aus Polyethylen,
Polypropylen,
Aluminium oder Polyester zur
Kaschierung von Dämmstoffen für thermische und
akustische Anwendungen – z. B. für Rohrleitungssysteme, Lüftungskanäle oder Fußbodenheizungen.
Lenzkes Spanntechnik GmbH
Address
Kerkhagen 1-3
58513 Lüdenscheid
Germany
Phone
+49 2351 964-0
Im monoaxialen Verstrecken von Folien liegt die
Kernkompetenz von Lenzing Plastics. Durch das
speziell entwickelte Verfahren sind MOPP-Folien
(MOPP = Monoaxially Oriented Polypropylen) durch
ihre Beschaffenheit der ideale Rohstoff für Aufreißbänder, silikonisierte Folien, Selbstklebebänder, Tragegriffe und viele andere Produkte.
Fax
+49 2351 964-222
Internet address
www.lenzkes.com
E-Mail
info@lenzkes.com
Thermoplast
Stand
Hall 02, A20 (Page 866)
Product Details
02.04.002
Lenzing Plastics GmbH & Co. KG
Films
Funktionalität und Ästhetik mit Polypropylen-Folien
Sie profitieren von unserer 40-jährigen Erfahrung in der
Faserballenverpackung. Ob Verpackungen mit ehemals Gewebe und Monofolie oder wie heute mit Coextrusionsfolie, Lenzing Plastics blickt auf eine sehr erfolgreiche Entwicklung in der Ballenverpackung zurück.
© 2014 Messe Düsseldorf GmbH
Product Overview
433
Lenzkes Spanntechnik GmbH
02.05.004
Fastenings
03.07.004.05.01
Mechanical mould fixing devices
© 2014 Messe Düsseldorf GmbH
434
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.004
Lenzkes Spanntechnik GmbH
Fastenings
LEONHARD KURZ Stiftung & Co. KG
Address
Schwabacher Str. 482
90763 Fürth
Germany
Phone
+49 911 7141-0
Fax
+49 911 7141-357
Internet address
www.kurz.de
E-Mail
sales@kurz.de
Stand
Hall 05, A19 (Page 874)
Multi- Quick
Normteile
Company News
Sondernormteile
10/17/2013
LEONHARD KURZ Stiftung & Co. KG
Matching cell phones to the outfit
Fürth/Germany, 9 October 2013: These days, it’s not
just belts or handbags that are required to match the
color of the clothing. No, fashion conscious people
even go a step further and expect mobile consumer
electronic devices to come in the latest trendy colors.
That’s why you will see notebooks in the currently popular color of mustard yellow, or MP3 players or smartphones decorated in the delicate ”winter pink” color or the elegant gray tones
that dominated the 2013 fall season.
In keeping with this trend, the coating specialist Leonhard Kurz will be presenting at this year’s plastics trade fair in Düsseldorf its current design range for
decorating the surfaces of cell phones, tablet PCs, notebooks, etc. The latest
trend colors can also be jazzed up with a wide variety of effects. At K 2013, Kurz
will be showcasing richly pigmented inks that have been augmented with special lacquer effects to produce an attractive, variable color play. Kurz will also
be exhibiting the trend colors in a wide range of metallized variants, thereby
responding to another fashion trend: a pronounced metallic look. Besides a
diverse collection of printed brushed designs, you will also be able to see truebrushed surfaces, from a range of subtle structures through to striking scratch
© 2014 Messe Düsseldorf GmbH
435
© 2014 Messe Düsseldorf GmbH
436
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
finishes. Metallic surfaces with sandblast effects will also be presented in the
latest colors. ”The designs might be new,” reassures us Nicolas Wagner, Head
of Business Area Plastic Decoration Sales and Marketing at Kurz, ”but our customers can expect the same high level of quality, and consistent processability
they have come to expect from all our products.”
Visit the Kurz booth A 19 in Hall 5 to find out more about various features that
can be integrated into the surface, for example protection against fingerprints,
or so-called NCVM (Non-Conductive Vacuum Metallized) coatings.
08/21/2013
Leonhard Kurz at the K 2013 Plastics Trade Fair - A
new dimension in plastics decoration
Fuerth/Germany, 12 August 2013: Leonhard Kurz Stiftung
& Co. KG would like to present a new dimension in plastics decoration at K 2013. The specialist in decorative and
functional coatings will be giving a live demonstration of a
process for decorating 3D geometries under technically demanding conditions. A special highlight of the display will
be the combined application of Inmold Decoration (IMD)
and Inmold Labeling (IML) on the same injection molding
machine. This machine will be used to produce a curved
automotive center console panel, which will be both decorated and equipped
with special functions during the injection molding process.
The patented 3DHS finishing process, which, in contrast to conventional hot
stamping, is capable of decorating three-dimensional components, will also be
demonstrated. Kurz developed the 3DHS process as a cost-effective decoration
option for slight to moderate 3D geometries. Visitors to the trade fair booth will be
able to see a vertical stamping machine developed by the Kurz subsidiary Baier
GmbH & Co. KG being used to apply a true chrome finish to an automotive air
vent cover.
Besides these live demonstrations, numerous new foil design ranges and trends
for a variety of industries, such as consumer electronics, home appliances, automotive and cosmetics, will be presented. These include metallic and wood designs with tactile structures for automotive interiors, brushed designs with novel
patterns for home appliance products, as well as stunning trendy colors with
shimmering effects for mobile devices.
To find out more about these and various other new design lines, visit the Kurz
booth A19 in Hall 5.
© 2014 Messe Düsseldorf GmbH
437
10/17/2013
Touch functionality on curved surfaces
Fürth/Germany, 9 October 2013: At K 2013, the company Leonhard Kurz will be demonstrating, for the first
time ever, a 3D plastic part being decorated while concurrently having touch functions integrated into it. Visitors to the Kurz booth will be able to see, live in action,
a Duo 400 injection molding machine from Engel Austria
producing the front panel of a curved automotive center
console in a single work operation while also equipping
it with two separate touch functions: touchkeys, slides and a wheel in the upper
area of the console, and a touchpad in the lower area. The component will be
produced in an integrated process combining Inmold Decoration (IMD) and Inmold Labeling (IML), whereby the decorative coating, including UV top coat, is
applied to the front face of the panel in the IMD transfer process, and the touch
functions are integrated into two separate Inmold labels that are fused to the
rear of the component. ”The market is calling for surfaces that are decorative,
functional and durable, all at the same time - and able to be produced highly efficiently as well,” explains Martin Hahn, Product Manager at Kurz, as background
for the development of this process. ”Thanks to this innovative integrated process, we have succeeded in mastering this balancing act.”
Functional structures printed on a PET carrier
The sensor foils used for the single touch panel and the multi touch functionality were developed by the Kurz subsidiary PolyIC. These transparent, conductive functional foils called PolyTC® are equipped with extremely thin, conductive
metal mesh structures. These structures are produced in a reel-to-reel process
in which extremely thin metallic layers are applied to a PET substrate. Using
transparent PET foils as the underlying substrate enables these PolyTC® sensors to be especially thin and flexible. Thanks to the advantageous mechanical
properties of the carrier foil and the metal mesh structure, they are able to be
processed by means of the IML process and are suitable for use on curved surfaces. This is a key advantage over the brittle ITO coating that has generally
been used in the production of capacitive sensor elements in the past.
New design options and process advantages
The production cell that Kurz and PolyIC will be presenting, in conjunction with
their die and machine manufacturing partners, not only opens up new interior
design options for the automotive industry, but also many other potential applications in the areas of consumer electronics, displays or household appliances.
It enables touch panels to be incorporated into the surface as a fully enclosed
flat element that can be integrated harmoniously into the overall design. These
controls, which have no switches, buttons or grooves, are not only visually ap-
© 2014 Messe Düsseldorf GmbH
438
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
pealing but also easy to clean and maintain. Since these components comprise
only the sensor foil and the contact elements for the controller connection, they
also save weight and space. The combined IMD and IML process offers economic advantages too. Producing a decorated injection molded part with integrated functionality in a single processing step significantly reduces the process
cost. The controls can be linked to the vehicle electronics system quickly and efficiently simply by plugging the contact points into the controller. ”In the end, it’s
the cost-effectiveness that Counts,” emphasizes Martin Hahn. ”That’s why we
focused on efficiency criteria while developing the process in conjunction with
our subsidiary PolyIC, our systems partner for decoration, sensor foil technologies, and the integration of these technologies. This principle applied equally
well to the mold and machine concept as well as the application technology.”
As Hahn further explains, optimizing the parameter settings for the overall injection molding process is a very time-consuming task. ”It requires meticulous
adjustment of all influencing variables, for example the sensor layout, the IMD
decor foil and the mold design - along with lots of experience! This kind of
problem can only truly be solved by a single-source supplier. Series production
has only been achievable, in this particular application, thanks to the combined
know-how of Kurz and PolyIC,” says Hahn with conviction.
At the K trade fair, a near series-production capable, fully-automated production
cell will be on display to demonstrate the economic viability of this integrated
process. Visit the Kurz booth A19 in Hall 5 to see a live demonstration of this
cost-effective production process.
10/17/2013
Brushed structures reinterpreted
Fürth/Germany, 9 October 2013: The coating specialist Leonhard Kurz will be presenting new design
concepts and decoration solutions for plastic surfaces
at K 2013. Brushed designs are typically associated
with engravings with linear, surface-covering structures. The new ”Brushed Offbeat” design line brushes
these preconceptions aside. This product range contains designs with brushed lines that are wavy or form geometric shapes. These
unusual brushed finishes have been made possible by a new manufacturing
technology. The brushed structures can be applied to the full surface, or alternating with plain metallic areas to produce novel patterns, thereby opening up a
wide variety of design possibilities and combination options.
Besides the aforementioned fantasy designs, Kurz will also be presenting novel
brushed structures with short scratches that create a strikingly realistic simulation of the visual appearance of brushed aluminum. These true metal coatings
© 2014 Messe Düsseldorf GmbH
439
offer an authentic brushed look and are available in gold or silver.
Plastic as a quick-change artist
Kurz will also be presenting decorative finishes with tangible structures that can
be applied to a smooth plastic surface to add a tactile dimension to the design.
These include technical designs with symmetrical patterns that make a surface
grippier, as well as wood designs that convey the natural appearance of openpored timbers. Visitors to the Kurz booth will also be able to see the new ”Woodgrain on Plastics” product range. This premium collection from Kurz aims to fulfill
the most stringent design requirements and promises outstanding print quality
and a stunning real wood appearance. Visit booth A19 in Hall 5 to judge these
new surface designs for yourself.
10/17/2013
Neues Veredelungsverfahren 3DHS senkt
Dekorationskosten
Fürth, 09.10.2013: Die Leonhard Kurz Stiftung & Co.
KG präsentiert auf der diesjährigen K-Messe das patentierte Veredelungsverfahren 3DHS. Am Kurz-Stand wird
eine 3DHS-Maschine in Aktion gezeigt, die eine PKWLuftausströmerblende partiell mit Chrom beschichtet.
Das Besondere an dieser Dekoration: der Luftausströmer
weist eine ausgeprägte 3D-Geometrie auf, die im herkömmlichen Heißprägeprozess nicht beschichtet werden kann. Das gängige Verfahren zur Dekoration eines solchen Kunststoff-Elements war bisher die Galvanisierung. Für diesen Vorgang werden zwei spritzgegossene Bauteile benötigt,
ein undekoriertes Basisteil sowie ein mit Chrom galvanisierter Ring, der auf dem
Grundausströmer montiert wird. Beim 3DHS-Prozess kann dagegen eine einteilige Blende mit einer partiellen Chrombeschichtung versehen werden. Das
Verfahren spart hier ein Spritzwerkzeug, einen Spritzvorgang sowie einen Montageschritt, was deutliche Kostenvorteile bringt. Auch die alternative Dekorationslösung, ein einteiliges Element vollflächig zu galvanisieren, ist durch
die größere Beschichtungsfläche wesentlich kostenintensiver. Weitere 3DHSVorzüge: die Technik ist umweltverträglicher und auch flexibler, denn Designwechsel sind durch einfaches Austauschen der Heißprägefolie möglich.
Das 3DHS-Beschichtungsverfahren erfordert drei aufeinander abgestimmte Komponenten: eine spezielle Heißprägefolie, ein 3DHS-Werkzeugsystem und die
3DHS-Maschine. Die von Kurz entwickelte Heißprägefolie ist in ihrer Formulierung an die Anforderungen der 3D-Dekoration angepasst. Sie besitzt eine
hohe Elastizität, die ein dem Prägeprozess vorgeschaltetes, thermisches Anformen an die Geometrie des Kunststoffteils erlaubt. Die Heißprägefolie ist verfügbar als Echtchrombeschichtung sowie in diversen Metalltönen, verschiedensten
© 2014 Messe Düsseldorf GmbH
440
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Brushed-Designs und einer großen Bandbreite pigmentierter Farben.
Das separat patentierte Werkzeugsystem besteht aus Fixier-Elementen für die
anzuformende Heißprägefolie sowie aus einem Heißprägestempel, der an die
3D-Geometrie des Dekorationsteils angepasst ist. Der auf das Verfahren abgestimmte Heißprägestempel wurde von dem Prägewerkzeug-Experten Hinderer +
Mühlich KG, einem Mitglied der Kurz-Gruppe, entwickelt. Die 3DHS-Maschine
ist mit Vorrichtungen zum Anformen der Heißprägefolie ausgestattet. Für die
Entwicklung dieser Maschine war eine weitere Kurz-Tochter zuständig, die
Baier GmbH & Co. KG Maschinenfabrik als Spezialist für Hubprägemaschinen.
Gemeinsam mit diesen Partnern bietet Kurz ein komplettes 3DHS-System sowie
umfassendes Prozess-Know-how, mit dem das Unternehmen seinen Kunden
bei der Implementierung der 3DHS-Dekoration zur Seite steht. Am Kurz-Stand
A19 in Halle 5 erfährt man Näheres.
10/17/2013
Design trends in automotive interiors
Fürth/Germany, 9 October 2013: The supplier of surface finishing products, Leonhard Kurz, will be presenting its latest designs for automotive interiors at K 2013.
The main highlights will be novel metallized effects,
and wood designs with structured surfaces, for example open-pored, partially matte-finished wood designs,
and real-metal coatings with shimmering and tactile
structures. The real-chrome coating process enables the production of a wide
variety of metallic tones that convey a luxurious character. These can be further
combined with structured wood or metallic designs to create attractive contrasts.
Besides combining visual and tactile design elements, the designers at Kurz
have also been focusing on the megatrend of individualization. ”The importance
of the interior design of a car is increasingly being recognized. The interior needs
to meet the requirements of a wide variety of target Groups,” reports Bernd Herrmann, Design Manager at Kurz. ”Future mobility types, for example Greenovator, Family Cruiser, Silver Driver or Global Jet Setter, make different demands on
their surroundings. Characteristics such as design and luxuriousness, comfort,
ease-of-use, eco friendliness, sustainability, and smart products at affordable
prices are gaining in importance,” says Herrmann. ”People spend a lot of time
in their cars and expect not only good functionality but also a cosy environment.
Visual effects alone are often no longer sufficient to fulfil these requirements,
which is why tactile elements are increasingly being integrated into the surface
design. The latest product lines from Kurz go a step further with the integration
of electronics into decorative components, all achieved in a single process step,”
explains Herrmann.
© 2014 Messe Düsseldorf GmbH
441
Visit the Kurz booth A19 in Hall 5 to experience for yourself the exceptional
tactility, appearance and functionality of these new surfaces.
10/17/2013
Das Handy soll zum Outfit passen
Fürth, 09.10.2013: Nicht nur Accessoires wie Gürtel
oder Handtasche werden heute farblich auf die Kleidung abgestimmt. Nein, der modebewusste Mensch geht inzwischen etwas weiter: Die Trendfarben
der Modesaison sind jetzt auch bei mobilen Geräten
der Unterhaltungselektronik gefragt. So findet sich
das derzeit angesagte Senfgelb auf Notebooks wieder,
und das zarte Winterrosa und die eleganten Grautöne, die die Herbstsaison
2013 dominieren, schmücken MP3-Player und Smartphones.
Entsprechend diesem Trend präsentiert der Beschichtungsspezialist Leonhard
Kurz auf der diesjährigen Kunststoffmesse in Düsseldorf sein aktuelles Designprogramm für die Oberflächen von Handys, Tablet-PCs, Notebooks und Co. Die
neuen Modefarben können mit verschiedenen Effekten zusätzlich aufgepeppt
werden. Kurz stellt auf der K 2013 satte pigmentierte Farben vor, die mit
speziellen Effektlacken versehen sind und dadurch ein reizvolles, changierendes Farbspiel zeigen. Daneben zeigt Kurz die Trendfarben in einer großen
Bandbreite an metallisierten Varianten und greift damit einen weiteren Modetrend auf: eine ausgeprägte Metalloptik. Neben diversen gedruckten BrushedDesigns werden echt gebürstete Oberflächen zu sehen sein, von dezenten
Strukturen bis zu auffälligen Kratzoptiken. Auch metallische Oberflächen mit
Sandstrahl-Effekten werden in den neuen Farben präsentiert. ”Die Designs
sind neu”, versichert Nicolas Wagner, Head of Business Area Plastic Decoration Sales and Marketing bei Kurz, ”aber die gewohnt hohe Produktqualität und
Verarbeitungskonstanz bleiben unverändert.”
Am Kurz-Stand A 19 in Halle 5 erfährt man außerdem Näheres zu den integrierbaren Funktionalitäten, wie etwa zum Schutz vor Fingerabdrücken oder zu
nicht leitenden, so genannten NCVM-Beschichtungen (Non conductive vacuum
metallized).
Pressefoto (JPG 1,9 MB)
Pressemitteilung (PDF 132,0 KB)
Kontakt
PDF Download
© 2014 Messe Düsseldorf GmbH
442
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
10/17/2013
New vehicle face using hot stamping
10/17/2013
New 3DHS finishing process reduces decoration costs
Fürth/Germany, 9 October 2013: Having successfully
produced a chrome coated radiator grille with a diamond lattice look, the company Leonhard Kurz has
demonstrated that the hot stamping process can be
used to decorate complex geometries. The requirement from the auto industry was to apply a partial
metallic finish to a radiator grille. The plastic part consisted of a lattice structure with 288 individual pins protruding from the nodes on the external face.
These pins, which form the visible face of the radiator, were required to be given
a brilliant and high-quality chrome finish. The particular difficulty with this application was that the pins all had domed heads and varying shapes so as to
produce a non-uniform refraction, and consequently a diamond-like sparkle, after the metallic coating has been applied. Full-surface galvanic chroming of the
plastic part would have adversely affected the appearance of the individual pins.
To individually galvanize the pins and then mount them would have required
enormous effort. It was therefore decided to use the environmentally friendly
and significantly more economical hot stamping process. In this dry transfer
process, the chrome layer, together with top lacquer and adhesive layers, are
released from a carrier foil by means of a heated silicone die and permanently
bonded to the plastic part.
Fürth/Germany, 9 October 2013: The company Leonhard Kurz is presenting the patented 3DHS finishing
process at this year’s K trade fair. Visitors to the Kurz
booth will be able to see a 3DHS machine in action as
it’s used to partially coat an automotive air vent panel
with chrome. The special characteristic of this specific
decoration application is that the air vent has a pronounced 3D geometry that cannot be coated in a conventional hot stamping process. In the past, plastic elements such as these have typically been decorated
by means of galvanization, which requires two injection-molded parts: an undecorated base component, and a ring galvanized with chrome that is mounted onto
the air vent. The 3DHS process, however, allows a single-component panel to
be partially coated with chrome. This finishing method eliminates the need for
an injection mold, along with the associated molding operation and assembly
step, and therefore offers significant cost advantages. The alternative decoration solution, which is to galvanize a single-piece component over the entire
surface, would also be significantly more expensive due to the larger coating
area. A further advantage of the 3DHS technology is that it is more environmentally friendly and versatile because design changeovers can be performed
simply by exchanging the hot stamping foil.
Besides the pin geometry, a further challenging aspect is the size of the radiator grille because an injection molded part of this size is required to meet part
tolerances within 2 millimeters. The particular challenge was to ensure that the
silicone die, into which the curvature of each individual pin had been incorporated, would contact each pin precisely and transfer the chrome coating accurately and with clean edges. Baier, a company specializing in the construction
of technically sophisticated vertical stamping machines and a member of the
Kurz Group, developed a custom hot stamping machine especially for this application: a four-head hot stamping machine with four indexed part fixtures that
divide the radiator grille into four segments that are coated consecutively. This
division of the part enabled the tolerances to be reduced and the individual pins
to be decorated with high contour accuracy. Precise adjustment of the stamping time, stamping temperature and stamping pressure ensured reliable transfer
onto the curved pins. To meet the complex specifications provided by the client,
the formulation of the hot stamping foil was tailored to this specific project, thus
enabling the permanency of the coating.
The 3DHS coating process requires three components that have been optimally
tailored to one another: a special hot stamping foil, a 3DHS die system, and the
3DHS machine. The hot stamping foil developed by Kurz has been specially
formulated to meet the requirements of 3D decoration. It has a high elasticity,
which enables it to be thermally shaped to match the geometry of the plastic
part in a work operation prior to the stamping process. The hot stamping foil
is available as a true-chrome coating, as well as in a diverse range of metallic
tones, a wide variety of brushed designs, and a large selection of pigmented
colors.
The decorated radiator grille will be on display at K 2013 at the Kurz booth A19
in Hall 5.
© 2014 Messe Düsseldorf GmbH
443
The separately patented die system comprises fixing elements for securing the
hot stamping foil to be shaped, and a hot stamping die that has been adapted to
suit the 3D geometry of the part being decorated. This optimized hot stamping
die has been specially developed by the expert stamping die manufacturer Hinderer + Mühlich, a member of the Kurz Group. The 3DHS machine is equipped
with suitable fixtures for shaping the hot stamping foil. Another Kurz subsidiary,
Baier, which specializes in vertical stamping machines, was responsible for the
development of this machine. Thanks to its collaboration with these partner
companies, Kurz is able to offer a complete 3DHS system with comprehensive
process know-how, and fully support its customers in the implementation of their
© 2014 Messe Düsseldorf GmbH
444
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
3DHS decoration solution. To find out more, visit the Kurz booth A19 in Hall 5.
Product Overview
10/17/2013
Designtrends im Automotive Interior
Fürth, 09.10.2013: Der Anbieter von Oberflächenveredelungen Leonhard Kurz präsentiert auf der K 2013
aktuelle Designs für den Fahrzeug-Innenraum. Den
Schwerpunkt bilden neuartige metallisierte Effekte und
Holzdekore mit strukturierten Oberflächen. Hierzu
gehören beispielsweise offenporige, partiell mattierte
Holzdesigns und Echtmetall-Beschichtungen mit changierenden und fühlbaren Strukturen. Dabei lassen sich während der Echtchrombeschichtung verschiedenste Metalltöne realisieren, die einen luxuriösen Charakter verleihen. Kombiniert eingesetzt liefern die strukturierten Holz- und Metalldesigns
reizvolle Kontraste.
Neben der Kombination von optischen und taktilen Designelementen haben
die Designer von Kurz vor allem den Mega-Trend der Individualisierung im
Fokus. ”Der Innenraum des Autos gewinnt zunehmend an Bedeutung. Er
muss den Ansprüchen unterschiedlicher Zielgruppen gerecht werden”, berichtet
Bernd Herrmann, Design-Manager bei Kurz. ”Zukünftige Mobilitäts-Typen, wie
beispielsweise Greenovator, Family Cruiser, Silver Driver oder Global Jet Setter
haben andersgeartete Bedürfnisse in Bezug auf Ihr Umfeld. Merkmale wie Design und Luxus, Komfort, intuitive Bedienbarkeit, Umweltverträglichkeit, Nachhaltigkeit sowie clevere Produkte zu bezahlbaren Preisen werden zunehmend
wichtiger”, so Herrmann. ”Menschen verbringen viel Zeit im Auto und erwarten
neben Funktionalität zunehmend ein behagliches Ambiente. Mit optischen Effekten allein lassen sich diese Ansprüche oft nicht mehr erfüllen. Deshalb
werden verstärkt haptische Elemente in das Oberflächendesign einbezogen.
Neueste Produktlinien von Kurz gehen noch einen Schritt weiter und integrieren
Elektronik in dekorative Bauteile, und dies in einem Prozessschritt”, erläutert
Herrmann.
Am Kurz-Stand A19 in Halle 5 kann man sich von der besonderen Griffigkeit,
Optik und Funktionalität der neuen Oberflächen überzeugen.
© 2014 Messe Düsseldorf GmbH
445
LEONHARD KURZ Stiftung & Co. KG
01.14.002
Decorative films
01.14.003
Printing inks
01.14.017
Stamping foils
02.01.005
Parts made by laminating
02.01.010
Parts made by injection moulding
02.02.004
Type printing
02.02.006
Embossing
02.03.002
Plastics products and parts for automotive
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.012
Plastics products and parts for medical engineering
02.04.002
Films
03.03.006
Slitter rewinders
03.04.002
Marking equipment
© 2014 Messe Düsseldorf GmbH
446
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
03.04.003
Embossing equipment
Company News
03.04.004
Laminating plant
10/25/2013
03.04.008
Equipment for In-Mould Decoration (IMD)
03.10.003
Rolls
The international manufacturer and fabricator of engineering plastics, Licharz, offers its cast polyamide under the new name LiNNOTAM. The innovative metalreplacement materials have especially long service
lives and are easy to machine. LiNNOTAM is available in various grades. At the K in Düsseldorf visitors
can get to know the family of products: October 16 to 23, Hall 5, Stand 5F11.
Industriepark Nord 15
53567 Buchholz/Westerwald
Germany
Phone
+49 2683 977-0
Fax
+49 2683 977-111
Internet address
www.licharz.de
E-Mail
info@licharz.de
Stand
Hall 05, F11 (Page 874)
LiNNOTAM is the new name for cast polyamide from
Licharz
Performance plastic material for component parts – introduction at the K in Düsseldorf
Licharz GmbH
Address
Licharz GmbH
The cast polyamides of LiNNOTAM can be produced as semi-finished products
or near net shape components and are virtually free of internal stress. Licharz
offers a large selection of shapes, weights and dimensions. Component parts
made of LiNNOTAM have proven themselves for many years in machine building, packaging equipment, drive and conveyor equipment, construction equipment and in food processing equipment.
Four Variations
In addition to the basic grade of LiNNOTAM, Licharz offers the grades LiNNOTAM DRiVE , LiNNOTAM GLiDE , LiNNOTAM HiPERFORMANCE and LiNNOTAM CUSTOM . Proprietary lubricants and additives give the polyamides special
characteristics which can, for example, improve the sliding properties or torque
transmission. They are materials which can be used in very different application
areas.
LiNNOTAM Food Grade
Components which come into contact with food must fulfill special requirements.
LiNNOTAM products – depending on the grade – fulfill regulations such as the
American FDA (Food and Drug Administration). Therefore they can carry the
”Food Grade” label which stands for the best possible safety and hygiene in the
processing of food.
K 2013
The K is the world’s largest trade fair for plastic and rubber. More than 3,000
exhibitors present the newest highlights in Düsseldorf and use the Fair as a
business and contact platform. The K runs from October 16 to 23 in Düsseldorf.
www.k-online.de
Licharz with LiNNOTAM at the K in Düsseldorf: 16. to 23. October in Hall 5,
© 2014 Messe Düsseldorf GmbH
447
© 2014 Messe Düsseldorf GmbH
448
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Stand 5F11
www.licharz.com
Product Overview
LiNNOTAM GLiDE
02.01.006
Parts made by mechanical treating
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.03.016
Plastics products and parts for optics/precision
engineering
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.011
Sealings/Sealrings
02.05.034
Bearing boxes, bushes and sections
LiNNOTAM GLiDE contains spezial additives and lubricants. They produce and
exceptionally low coefficient of friction and reduce the unwanted Stick-Slip effect
to a minimum. The sliding properties and self-lubrication effects are retained
throughout the entire service life. Typical application examples are bushings,
slider pads, guide strips and feed screws.
LiNNOTAM HiPERFORMANCE
LiNNOTAM HiPERFORMANCE are partially crystalline, thermoplastic high performance polyamides. Using carefully chosen additives and modifiers, they
have been specially designed for the demanding requirements of specialty components in machinery design and offshore technology. LiNNOTAM HiPERFORMANCE offers particularly good dimensional stability and
fatigue strength, and excellent damping properties. In addition it has good shock
loading, low moisture absorption and hydrolysis resistance. The material can be
machined well and is used for example for highly loaded wheels, crane float pads
and near net shape cast components.
LiNNOTAM DRiVE
The cast polyamides of LiNNOTAM DRiVE are produced in a special process
and contain a metal core. The shape and friction locked plastic / metal combination guarantees optimal force and torque transmission. It makes possible the
transfer of high axial and torque forces, and it achieves roundness and running.
LiNNOTAM DRiVE is used for gears and sprockets, wheels, as well as for cams,
mixing arms and pump wheels.
LiNNOTAM CUSTOM
With LiNNOTAM CUSTOM Licharz is able to customize material properties to
specific requirements at the high quality standards of the LiNNOTAM brand.
Licharz GmbH
Further information can be found under www.licharz.com.
© 2014 Messe Düsseldorf GmbH
449
© 2014 Messe Düsseldorf GmbH
450
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.035
Bogie wheels and runners
02.05.050
Parts for pumps
02.05.080
Toothed wheels and racks
Product Details
02.01.006
02.05.080
Toothed wheels and racks
Plastic gear wheels
Licharz GmbH
Parts made by mechanical treating
Machined parts
LITHOS Industrial Minerals GmbH
02.04.001.03
Semi finished products of polyamide (PA)
semi-finished products of PA
02.05.035
Address
Wirtschaftspark ecoplus Str. 2/8
4482 Ennsdorf
Austria
Phone
+43 7223 86161-0
Fax
+43 7223 86161-15
Internet address
www.lithos-minerals.at
E-Mail
office@lithos-minerals.at
Stand
Hall 05, F30-14 (Page 874)
Bogie wheels and runners
Plastic castors
© 2014 Messe Düsseldorf GmbH
451
© 2014 Messe Düsseldorf GmbH
452
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
01.01.037
Masterbatches
01.02.008.01
Compounds of styrenic block copolymers (SEBS,
SBS, SIS, TPE-S)
01.03.001
01.03.045
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.004
Compounds/Recyclates
LITHOS Industrial Minerals GmbH
Bulk moulding compounds (BMC)
Reinforcing materials
01.10.002
Additives, other
01.10.081
Nucleating agents
01.10.082
Optical brighteners
01.10.116
Processing auxiliaries
01.11.035
Talc
02.03.002
Plastics products and parts for automotive
Product Details
02.03.005
LITHOS Industrial Minerals GmbH
Plastics products and parts for household/consumer
CleanPlay
Wirksamer Schutz vor Hunde- und Katzenkot.
02.03.003
Plastics products and parts for building applications
So bleiben Gärten, Spielplätze und Sandkisten natürlich sauber.
02.03.004
Plastics products and parts for office equipment/
promotion
Natürlich und unschädlich:
02.03.005
Plastics products and parts for household/consumer
CleanPlay besteht aus vulkanischem Gestein mit ätherischen Duftstoffen und ist
unschädlich für Menschen, Tiere und Pflanzen. Die enthaltenen Öle besitzen
eine antibakterielle Wirkung gegen Krankheitserreger, wie z.B. Coli-Bakterien
oder Salmonellen, und reduzieren deren Vermehrung.
02.03.006
Plastics products and parts for electro-/household
appliance
Langanhaltend und effektiv:
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
© 2014 Messe Düsseldorf GmbH
453
Die spezielle Struktur des Trägermaterials gibt die ätherischen Öle nur sehr
langsam frei. Dadurch wirkt CleanPlay dauerhaft und häufiges Nachdosieren
wird überflüssig. Je nach Witterung reicht eine ein- bis zweimalige Ausbringung
pro Saison, um Hunde und Katzen davon abzuhalten, ihr ”Geschäft” hier zu verrichten.
© 2014 Messe Düsseldorf GmbH
454
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Universell und unauffällig:
im Körper gebunden und können so die Leber nicht mehr unnötig belasten.
CleanPlay duftet zitronig-frisch und ist somit auch ideal für Anwendungen in
Wohnräumen (z.B. in Blumentöpfen). Das feine Granulat ist im Spielsand nahezu unsichtbar und wird in Beeten oder Grünflächen durch Regen nicht so
leicht in den Boden eingewaschen wie Pulver oder Gelees.
Andere für den Körper wichtige Stoffe wie Aminosäuren, Zucker und Vitamine
werden aufgrund ihrer Molekülstruktur durch den Einsatz von LithoFeed jedoch
nicht gebunden und bleiben somit für den Organismus weiter verfügbar.
Ein weiteres PLUS:
Nach Abgabe der Duftstoffe wirkt das Granulat als Wasser- und Nährstoffspeicher und verbessert zusätzlich die Bodenstruktur.
InokuLith
Ein weiterer wichtiger Nutzen durch den Einsatz von LithoFeed in der Fütterung
ist sein hoher Ballaststoffanteil von nahezu 100%. Andere Rohfaserträger wie
Kleie, Grasmehl, Trockenschnitzel, usw. enthalten hingegen nur etwa 10-30%.
Außerdem stellt LithoFeed durch seine große Oberfläche eine wichtige Besiedelungsgrundlage für im Darm lebende Mikroorganismen dar.
Generell zeigen Tiere denen LithoFeed über das Futter verabreicht wird, bessere
Vitalfunktionen und einen stabileren Gesundheitszustand, was sich auf ihre
Nachkommen überträgt.
Der mikrobiologische Zusatz für mehr Wirtschaftlichkeit.
Durch die Kombination aus hoch porösem und speziell
aktiviertem Zeolith und Mikroorganismen beschleunigt
InokuLith den Abbau von organischen Verbindungen
und unterstützt somit z.B. die Kompostierung, Wasserklärung oder das Absetzverhalten. Hierbei spielt die spezielle Struktur des
Trägermaterials eine entscheidende Rolle. Durch die extrem große Oberfläche
stellt es eine optimale Besiedelungsfläche für die Mikroorganismen dar. Diese
vermehren sich dadurch explosionsartig und somit können die biologischen
Abläufe schneller und effektiver stattfinden.
LONG NEW INDUSTRIAL CO., LTD.
Address
No. 15, 8th Rd., Taichung Industrial
40755 Taichung
Taiwan
Phone
+886 4 23592826
Fax
+886 4 23501855
Internet address
www.long-new.com
Der Futterzusatz für Gesundheit und höhere Produktivität im Stall.
E-Mail
sales@mail.long.new.com
Tierernährung:
Stand
Hall 04, A54-4 (Page 870)
Im Haushalt kann InokuLith z.B. als Geruchsbinder in der Biotonne oder als
Kompostbeschleuniger im Garten eingesetzt werden.
02.03.009
Plastics products and parts for agriculture
LithoFeed
Dank seiner Adsorptionskapazität vermag LithoFeed
Toxine im Körper (solche die durch Nahrung aufgenommen werden als auch
die, welche im Körper produziert werden) zu fixieren, und somit unschädlich zu
machen.
LithoFeed hilft den Tieren auch bei der Verdauung. Insbesondere im Hochleistungsbereich aber auch in der Zucht, wo stark eiweißhaltige Futtermittel eingesetzt werden, da es hierbei zu einer vermehrten Bildung von Ammonium (NH4)
im Verdauungstrakt kommt. Das gebildete NH4 aber auch Ammoniak und andere N-Verbindungen werden durch die Beigabe von LithoFeed in Futtermitteln,
© 2014 Messe Düsseldorf GmbH
455
© 2014 Messe Düsseldorf GmbH
456
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
LPKF Laser & Electronics AG Laser Welding Division
Product Overview
LONG NEW INDUSTRIAL CO., LTD.
02.02.003
Printing
02.02.006
Embossing
03.02.001.02.06
Extrusion lines for laminating and coating
03.03.006
Slitter rewinders
03.04.001
Printing equipment for plastic and rubber products
03.04.003
Embossing equipment
03.04.004
Laminating plant
03.04.005
Coating plant
Address
Gundstr. 15
91056 Erlangen
Germany
Phone
+49 9131 61657-0
Fax
+49 9131 61657-77
Internet address
www.lpkf-laserwelding.com
E-Mail
info.laserwelding@lpkf.com
Stand
Hall 11, E04 (Page 902)
Company News
08/05/2013
Product Details
02.02.003
LPKF Laser & Electronics AG Laser Welding...
LPKF Laser Welding Expands
LONG NEW INDUSTRIAL CO., LTD.
Relocation from Erlangen to Fuerth doubles production
area
Printing
Printing
(1) The printing units employ an Electronic Line shaft
system to increase registration accuracy and shorten
registered processing time while minimizing defect ratio. (2) The PLC microcomputer controller allows for accurate and fast control of all working parameters,
greatly upgrading operation flexiblility. (3) Optional shaftless printing cylinder
clamping device and 2-pcs impression rubber rollers device are available for
higher performance.
Since being set up in 2001, the laser plastic welding department has seen its workforce grow to more
than 100 employees. Despite repeated expansions at
the current location in Erlangen it is bursting out of its
seams. As already announced by management, LPKF
has now acquired a production building that offers growth potential for this area
of the business.
“At around 14 million euros, the purchase of the production building in Fürth is
the largest single investment in the company’s history,” explains LPKF CEO Dr.
Ingo Bretthauer. He says that this goes to show the growth potential LPKF sees
in laser plastic welding.
These high expectations are based on the results of the past. The growth
rates were in double-digits from the beginning. Especially when it comes to
demanding joining tasks, laser plastic welding is rapidly replacing conventional
processes today. It only needs simple work holding devices, creates visually
appealing weld seams and reduces the reject rate during the welding process
© 2014 Messe Düsseldorf GmbH
457
© 2014 Messe Düsseldorf GmbH
458
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
due to its sophisticated monitoring technologies.
Potential for expansion at the previous location was clearly exhausted. Even
auxiliary buildings were converted to storage and production areas in the last
few years. The new building was first built in 2008 and is only ten kilometers
away in Fuerth. With a production area of around 10,000 square meters, it will
end up 2.5 times as big as the previous location. The Application Center for
optimization of customized processes also gets more space. LPKF has also
acquired an additional undeveloped area for later expansion. Office spaces will
be converted before staff relocation.
Frank Brunnecker, director of the laser welding department, initially expects a
noticeable reduction in delivery times. In addition, he wants to further increase
the quality of the systems and offer better access to the technology for interested
persons at the customer technical center. Production is scheduled to start in
August – with the preliminary work for this already in full swing. According to
Brunnecker, final relocation of all employees will be completed in 2014.
09/26/2013
and laser unit considerably reduces its footprint in the direct production zone.
Senior Vice President Frank Brunnecker sends out an invitation: ”LPKF will be
presenting its application specialists live. This makes a visit a must for all those
who face the challenge of successfully creating top quality welds at a small or a
large scale.”
Product Overview
LPKF Laser & Electronics AG Laser Welding...
02.02.005
Welding
03.05.008
Laser beam welding machines
03.07.003.03
Assembly systems
Product Details
New systems presented at the K
02.02.005
With its PrecisionWeld laser welding system presented in Europe for the first
time on the LPKF stand (E04 in Hall 11), LPKF expands the areas of application
for laser plastic welding. This system has been specially designed for welding
the fine channels required for microfluidics applications. This compelling overall
concept boasts three completely new appproaches: The housing is derived from
the industrially tried-and-tested MicroLine series. Active components decouple
the machining compartment from the environment. A new laser process (ClearJoining) enables transparent plastics to be welded without any additives, and a
newly developed clamping technology compensates for production tolerances
arising from the preceding production stages.
LPKF Laser & Electronics AG Laser Welding...
Welding
Better safe than sorry with LPKF TMG 3
LPKF Transmission Measuring Device TMG 3
The LPKF transmission measuring devices LPKF TMG 3 enable the transparent
properties of plastics to be checked and measured quickly and easily. It only
takes a few seconds to check that the actual transparency figures match the set
values determined during process definition. Testing reveals any deviations in
the materials before an unsuitable component enters the production process.
The second brand-new system is the LPKF ProtoWeld . Instead of wishful thinking the delivering of test results immediately when using new materials or product
layouts has now become reality in the daily routine of scientists. Advantage in
the production process enables advantage in the overall process.
Moreover, typical welding systems from the broad product portfolio will also be
showcased. The PowerWeld product line represents the stand-alone systems.
PowerWeld 2000 is shown with live demo welding of bank card holders on the
booth of BASF in hall 05/C21. Live demo welding of surge tanks for vehicle
motors with the PowerWeld 2600 including rotary table is presented on LPKF
stand in hall 11/E 04.
For integration within a client’s own production lines the LPKF InlineWeld 6200
is showcased. The clever separation of the welding head and the control unit
© 2014 Messe Düsseldorf GmbH
459
© 2014 Messe Düsseldorf GmbH
460
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Luen Tai Rubber Manufactory
Luxus Ltd
Address
4/F, Flat I, Wah Lik Industrial Centre,
Tsuen Wan, Hong Kong
China, Hongkong, Special Administrative Region
Address
Fairfield Industrial Estate
LN11 0LQ Louth, Lincolnshire
Great Britain / Northern Ireland
Phone
+852 24114128
Phone
+44 1507 604941
Fax
+852 24135595
Fax
Internet address
www.lt-rubber.net
Internet address
www.luxus.co.uk
E-Mail
sales@lt-rubber.net
E-Mail
info@luxus.co.uk
Stand
Hall 02, D23-4 (Page 866)
Stand
Hall 05, A45 (Page 874)
Product Overview
02.04.001.12
Luen Tai Rubber Manufactory
02.04.001.12
08/22/2013
Semi finished products of rubber
Product Details
Luen Tai Rubber Manufactory
Semi finished products of rubber
Product Information
Our company mainly produces rubber parts for automotives, medical appliances, household appliances,
electronic products, consumer goods and toys, including rubber o rings, rubber seals, rubber gaskets, rubber grommets, rubber sleeves, rubber bellows, rubber
bumpers, rubber shock absorbers, rubber hoses, rubber pipes, rubber tubes,
rubber washers, rubber sheets, rubber mats, rubber handles, rubber valves,
rubber diaphragms, rubber bushings, rubber boots, rubber connectors, rubber
plugs, rubber tires, rubber wheels, rubber pads, silicone rubber bands, silicone
rubber bracelets, silicone rubber keypads, silicone rubber covers, silicone rubber caps, rubber parts manufacturer, molded rubber components.
© 2014 Messe Düsseldorf GmbH
Company News
461
Luxus Ltd
Luxus shows sustainable polymers have come of age
at K2013
LUXUS SHOWS SUSTAINABLE POLYMERS HAVE COME OF
AGE AT K2013
UK leading plastics solutions provider Luxus will be showing under the banner of ‘The fusion of Art, Science and Innovation’ its latest evolution in high performance recycled content polymers for the global automotive, waste, construction and retail
grocery sectors in Hall 5, stand A45 at the K Show, Dusseldorf,
Germany, 16th-23rd October 2013.
This £25m turnover company with 140 staff has been developing polymers for
nearly 50 years to deliver grades that are now able to reduce weight, carbon and
cost in a broad range of applications from auto interior trims to returnable transit
packaging for major grocery chains.
Sarah Coggle, Marketing Manager, Luxus, said: “We have chosen ‘The fusion of
Art, Science and Innovation’ theme for the K Show as it reflects how Luxus has
continued to really push the boundaries in recycled content polymer technology
beyond the accepted potential to deliver high quality engineered ‘eco’ positive
grades.”
© 2014 Messe Düsseldorf GmbH
462
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Its commitment to innovation has most recently led to the development of a
lightweight PP for ‘A’ surface interior applications known as Hycolene™ based
on both prime and recycled materials. The recycled grade offers automotive
manufacturers a material with a high (up to 60 per cent) recycled content gained
from post-industrial and post-consumer feedstocks - yet it still delivers the quality
and durability expected for car interior trims.
The major benefits of Hycolene are both the weight saving it offers, typically a
10-12 per cent weight reduction for each component and improved scratch resistance over current talc filled PP alternatives. So it effectively lifts the burden on automotive manufacturers enabling them to meet both stringent EU
emissions targets through ‘lightweighting’ as CO2 is reduced and ‘green’ performance goals thanks to its recycled content.
Hycolene is currently being tested by Renault Nissan at its UK based European
Technical Centre using interior trim moldings from the Nissan Qashqai. Current
activity with auto manufacturers indicates that Hycolene will be used in volume
production vehicles by 2015. Additional Hycolene grades are also planned for
the future including a new high impact version and various colour options too.
Innovations such as Hycolene are possible thanks to the company’s in-house
Technical Centre which provides the true ‘hub’ of the operation. It enables Luxus
to offer testing and analysis services to its clients, with the aim of bridging the
‘gap’ between polymer science and the commercial needs of the various industries it supports.
It offers solutions for both general industry and specialist applications and is
equipped to a very high standard allowing testing for MFI, Izod, FDI, HDT, VICAT,
tensile and FITR. The accurate data generated provides the ‘building blocks’
needed for the formulation of new materials.
Luxus will also be showcasing its ‘closed loop’ recycling services such as
‘Tray2Tray’ that offers an environmentally friendly solution for unwanted plastics
waste generated in the retail supply chain. ‘End of life’ transit materials such as
plastic crates, boxes and pallets for example, are collected by Luxus and then
re-engineered at its recycling facility back into the same ‘transit’ packaging raw
material to the client’s specifications.
Or, Luxus can purchase the problem waste to re-manufacture into new high
quality compound significantly reducing the client’s carbon footprint and turning
a cost into a revenue stream.
Continued investment in both its Technical Centre and production capacity with
new extrusion lines will enable Luxus to guarantee the delivery of its technical
recycled content polymers for ‘eco’ conscious markets in the long-term.
Photos: Sarah Coggle, Marketing Manager, Luxus
For further information please contact Sasha Stewart, Straight Talk PR, email:
sashastewart@outlook.com
Luxus Ltd
Established in 1965 Luxus has become one of the UK’s leading independent
technical plastics companies.
Based in Louth Lincolnshire, its modern manufacturing facility now occupies a
covered area of 28,328 square meters and it uses state of the art technologies to
deliver highly specified thermoplastic compounds based on prime and recycled
feedstocks - with a granulation capacity currently of 30,000 tonnes per year.
Luxus is the joint winner from the North East region for the prestigious ‘HSBC
Business Thinking Award’ 2011. For further information please visit www.luxus.co.uk
/* Style Definitions */ table.MsoNormalTable {mso-style-name:”Table Normal”;
mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes;
mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:””; mso-paddingalt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; mso-pagination:widoworphan; font-family:”Calibri”,”sans-serif”; mso-ascii-font-family:Calibri; mso-asciitheme-font:minor-latin; mso-fareast-font-family:”Times New Roman”; mso-fareasttheme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minorlatin;}
Product Overview
Luxus Ltd
01.01.010.11
Compounds
01.01.017
Compounds (Polymer blends)
01.01.032
Granulates
01.01.093
Polypropylene
01.01.116
Reclaimed material
02.04.004
Compounds/Recyclates
Ends
© 2014 Messe Düsseldorf GmbH
463
© 2014 Messe Düsseldorf GmbH
464
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
permits the use of a soft raw material compound and guarantees a firm fit in the
socket.
M.O.L. Gummiverarbeitung GmbH & Co. KG
Address
The soft rubber compound (SBR 40 ± 5 IRHD) presses into any rough surfaces
on the pipe wall when the pipes are connected to ensure a high level of sealing
reliability. In addition the softer lips ensure excellent connecting properties.
Gutenbergstr. 12-14
49377 Vechta
Germany
Phone
+49 4441 9245-0
Fax
+49 4441 7152
A reinforcing ring of non-cracking polypropylene is fitted to provide sufficient
stability for the SYSTEM DD seal in the socket. This prevents the seal being
pushed out when the pipes are laid. The seal is mainly used for building applications (high-temperature resistance sewage pipes), but the SYSTEM DD seal
can also be used for sewage pipes.
Internet address
www.mol-elastomer.de
02.05.011
E-Mail
info@mol-elastomer.de
Integra [ø 300-2600 mm]
Stand
Hall 07.1, C24 (Page 886)
Product Overview
M.O.L. Gummiverarbeitung GmbH & Co. KG
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
Product Details
02.05.010
Sealings/Sealrings
The M.O.L. INTEGRA concrete pipe seal is integrated
into the socket and guarantees a firm, reliable connection between concrete pipes and reinforced concrete
pipes in compliance with DIN EN 1916. In addition the
INTEGRA seal meets the requirements of EN 681-1
and the FBS quality guideline QR 4060®.
Material: The seal is made of SBR (styrene-butadiene rubber) which is ideal for
use in sewage systems and complies with the requirements of the DIN EN 681-1
WC 50 standard. Our INTEGRA seal is tested and inspected for quality by MPA
NRW (Dortmund) and KIWA Netherlands.
M.O.L. Gummiverarbeitung GmbH & Co. KG
Sealing profiles
System DD [ø 32–315 mm]
The SYSTEM DD lip seal ring with reinforcing ring (PP)
is developed for plastic pipes and fittings made of PP
and PVC in compliance with EN 1451-1 and EN 14011 and meets the requirements of EN 681-1 WC. The
socket dimensions recommended by M.O.L. apply as
well as for other pipe systems.
Pipe manufacture: Fit the INTEGRA seal onto the cleaned base ring. The base
ring should be lightly lubricated. Fill the socket with concrete and then start
sealing. Subsequently cast the concrete pipe in the customary manner. After
removing the pipe from the form, place the outer and inner support ring onto the
spigot and remove from the form with the base ring when the concrete has set.
When the concrete has fully set, the spigot and socket pipe with the INTEGRA
seal is ready for use.
Note for pipe installation: Before joining the pipes, grease the spigot and seal
thoroughly with a suitable lubricant (also available from M.O.L.). Centre and
insert the spigot into the socket and pull the pipes together.
The SYSTEM DD seal features two sealing lips which provide double safety.
This is a decisive advantage in comparison to conventional single-lip systems,
especially in the building sector. Another feature is the reinforcing ring which
© 2014 Messe Düsseldorf GmbH
465
© 2014 Messe Düsseldorf GmbH
466
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Telescopic collar
Product Overview
Standard version
Maag Flockmaschinen GmbH
01.14.006
Flock
02.05.005
Flocking
02.05.047
Surface treated and decorated parts
Lip telescopic collar
03.04.006
Flocking plant
The lip telescopic collar is used for the same applications as the standard version. The lips provide a seal between the riser and the telescopic pipe and the
telescopic function is not affected.
03.09.002.05
Other measuring and test equipment for mechanical or
dynamic properties
The telescopic collar serves as a connector between
the riser and the telescopic pipe. It is easy to fit and is
also available with an embossed customer logo. The
telescopic collar is available for smooth and corrugated risers made of PVE (EN
1401-1), PE or PP. The gap dimension is the determining factor. The employed
raw material is SBR 60 Shore ± 5 IRHD in compliance with EN 681-1.
Product Details
Maag Flockmaschinen GmbH
Address
02.05.005
Maag Flockmaschinen GmbH
Flocking
In der Braike 16
72127 Kusterdingen
Germany
Manual Flocking
Phone
+49 7071 94910-0
Fax
+49 7071 94910-21
Universal units for manual flocking are used in the
hobby and model construction as well as in craftswork,
laboratories or prototype construction.
Internet address
www.maag-flock.com
E-Mail
info@maag-flock.com
Stand
Hall 05, A01 (Page 874)
MINI flocker
HEK 100 Manual Flocking Unit
Designed for industrial application of surfaces and flat, shaped parts.
EPF 2000 Electrostatic/pneumatic Flocker
© 2014 Messe Düsseldorf GmbH
Three-dimensional products, hollow bodies and deep recesses form a Faraday cage. The interiors of these objects can only be flocked with the electrostatic/pneumatic method.
467
© 2014 Messe Düsseldorf GmbH
468
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.047
Surface treated and decorated parts
Product Overview
Madag Printing Systems AG
maag Flocking technology
02.02.003
Printing
Different substrates used require adapted and appropriate pre-treatments. Standard pre-treatment methods
are primer application, plasmation, fluorination. Different pre-treament equipment is available.
02.02.004
Type printing
02.02.006
Embossing
Adhesive application on Molded Parts
03.02.004.04
Other presses
The adhesive may be applied by different methods. The simpliest method is
manually by a spray gun, or fully automated by a robot.
03.04.001
Printing equipment for plastic and rubber products
03.04.002
Marking equipment
03.04.003
Embossing equipment
Pre-treatment of Molded Parts
Madag Printing Systems AG
Address
Brunaustr. 185
8951 Fahrweid
Switzerland
Product Details
02.02.006
Madag Printing Systems AG
Embossing
Phone
+41 43 3229900
MADAG – Hot Stamping Machines
Fax
+41 43 3229901
The right choice for every requirement!
Internet address
www.madag-printingsystems.ch
E-Mail
info@madag-printingsystems.ch
Stand
Hall 04, B14 (Page 870)
Application versatility
© 2014 Messe Düsseldorf GmbH
Whether packaging or machine industry, automotive
or medical branch; MADAG Printing Systems AG is
your competent partner and offers you a comprehensive range of Hot Stamping Machines, which offer solutions for every individual
challenge. Know-how and long-standing experience are the guarantors for quality and precision. Convince yourself of the customized variety of MADAG Hot
Stamping Machines.
469
© 2014 Messe Düsseldorf GmbH
470
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
hole was processing by Ø0.122mm tungsten steel electrodes. Furthermore, the
dimension tolerance of hole is +/-0.0015mm.
Man Fung Mould Industrial Co. Ltd.
Address
Rm. 10, 7/F., Block B, East Sun
Kowloon, Hong Kong
China, Hongkong, Special Administrative Region
Phone
+852 27630068
Fax
+852 27630068
Internet address
Marubeni Europe Plc. Chemical Group
Address
Benrather Str. 18-20
40213 Düsseldorf
Germany
www.mfmould.com
Phone
+49 211 3671-0
E-Mail
venus@mfmould.com
Fax
+49 211 3671-375
Stand
Hall 01, A25-8 (Page 864)
Internet address
www.europe.marubeni.com
E-Mail
exhibition-chemical@marubeni.com
Stand
Hall 07a, D25 (Page 880)
Product Overview
02.03.016
Man Fung Mould Industrial Co. Ltd.
Plastics products and parts for optics/precision
engineering
Product Details
02.03.016
Man Fung Mould Industrial Co. Ltd.
Plastics products and parts for optics/precision engineering
Man Fung Mould Industrial Co. Ltd.
Coupling
The coupling is a precision parts utilized in medical field.
09/20/2013
Marubeni Europe Plc. Chemical Group
Marubeni
We are not a household name, but our products are in
your house. Whether it’s the food you eat, the clothes
you wear, the car you drive, or the essentials you use, somehow Marubeni Europe touches your everyday life.
09/25/2013
The size of the parts is Ø11.3 x 14.3mm and its dimension tolerance requirementis-0.00 /+0.05mm. It is a 32cavity tool that utilizes hot to cold runner system for gating and 4 groups of electrical servo motor for mold release.
Solvay Energy Services, CDC Climat and Marubeni join
forces
24 September 2013
Micro Filter
The micro filter is a very precise and very tiny plastic parts. Although the partsdimension is merely Ø6.88mm x 1.2mm (thickness), there are totally 795 hexagonal holes on it and the diameter of each hole is Ø0.08mm. Each hexagonal
© 2014 Messe Düsseldorf GmbH
Company News
471
Solvay Energy Services, a 100% subsidiary of Solvay SA, CDC Climat, a 100%
subsidiary of Caisse des Dépôts and Marubeni Corporation (“Marubeni”) have
created a joint venture to finance and operate an energy efficiency project at
Solvay’s Rare Earth plant in La Rochelle (France).
This joint-venture will finance the revamping of a gas turbine and the replace-
© 2014 Messe Düsseldorf GmbH
472
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ment of a fuel-oil boiler by a new efficient heat recovery steam generator.
Through the operation, it will reduce energy consumption and carbon emissions.
Therefore, it allows Solvay’s plant to increase its competitiveness while reducing
its environmental impact. Following this first project, partners intend to further
develop this type of innovative structuring and financing on a larger scale to assist industrial sites in reducing their energy consumption and CO2 emissions.
Projects will be implemented on Solvay plants and third parties sites within Europe.
The test serves to capture Stick-Slip phenomena and determines the coefficient
of friction for material pairs under typical operating conditions. The standard
VDA 230-206 measuring mode has established itself worldwide ton investigate
the behavior of leather, artificial leather, fabrics, thermoplastics, coatings and
metal. Input parameters are normal force and relative velocity. The test can be
performed in a temperature range of -40°C up to +85°C at humid, dry and wet
humidity. An attached sensor captures the temperature and humidity.
Solvay Energy Services, CDC Climat and Marubeni bring complementary expertise to this promising collaboration, in a global objective to be key players
of the energy transition. Beyond co-financing the project, Solvay Energy Services and Marubeni will bring their know-how in energy assets operations and
maintenance. For CDC Climat, this pioneer initiative shows that industrial energy efficiency projects can provide satisfying risk/return to financial investors
and significant environmental benefits.
The high relative velocity of 1 to 200 mm/s enables new applications like the
simulation of window regulators and sliding roofs. The know wear and abrasion
tests from the SSP-03 are still possible. Additionally individual test scenarios for
Stick-Slip behavior can be implemented.
09/25/2013
High relative velocity
09/25/2013
Ziegler Instruments new Stick-Slip Stand SSP-04 exclusive Presentation at Marubeni´s stand
Marubeni Corporation has succeeded to renew the
status of an index component of the Dow Jones
Sustainability Indices (DJSI World 2013/2014) for the
6th consecutive year.
No Squeak and Rattle
Sep. 24. 2013
Test Stand for the tribological investigation of material pairs, especially to measure stick-slip phenomena.
Marubeni Corporation
Our newest development, the Stick-Slip Test Stand SSP-04.
Simplicity and user friendliness was our main focus while developing the test
rig. The control elements with the material samples are easily accessible and
clearly arranged. The overall size makes it possible to place it inside a climatic
chamber.
Key-Features:
Determines the coefficient of friction for material pairs under typical operating
conditions
Objective measurement of stick-slip phenomena
The status of Marubeni Corporation (”Marubeni”) has been renewed as an index
component of the Dow Jones Sustainability Indices (DJSI World 2013/2014),
one of the best known measures of Socially Responsible Investment (SRI)* in
the world, for the 6th consecutive year.
The DJSI World evaluates companies for a high level of sustainability based on
the three principal criteria of “Economy”, “Environment” and “Society”, as well
as criteria specific to each company.
This year 333 companies (340 companies in the previous year) from all over
the world were selected for the index, including 21 Japanese companies (20
companies in the previous year).
Marubeni has also achieved the top score to become “Industry Leader” in “Trading Companies Distributors”, the category to which Marubeni belongs. This is
the 5th year Marubeni has achieved industry leader.
Determination of a Risk-Priority-Number
Prediction if material pairs are acceptable or unacceptable
The standard VDA 230-206 measuring mode is worldwide accepted
Going forward, Marubeni will continue to gain the trust of all its stakeholders
and aim toward sustainable growth by making efforts to solving societal and
environmental issues at the same time as increasing its competitive power.
Investigation of wear and abrasion
* SRI Index
Technical Areas of Applications
An index of socially responsible investment based not only the financial aspects
Suitable temperature range of -40°C to +85°C
© 2014 Messe Düsseldorf GmbH
473
© 2014 Messe Düsseldorf GmbH
474
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
of companies but also on Corporate Social Responsibility (CSR) measures as
important criteria for investment decisions.
Product Overview
Marubeni Europe Plc. Chemical Group
01.01.001
Acetal homo and copolymers (POM)
01.01.004
Acrylonitrile/butadiene/styrene polymerblends
01.01.005
Acrylonitrile/butadiene/styrene copolymers
01.01.007
Acrylonitrile/styrene/acrylic ester copolymers (ASA)
01.01.009
Barrier plastics
01.01.010.02
Bioplastics, Renewable based
01.01.058
Polyarylamide (PA MXD6)
01.01.059
Polyarylate
01.01.064
Polybutylene terephthalate (PBT)
01.01.066
Polycarbonate (PC)
01.01.067
Polycarbonate blends
01.01.090
Polyphenylene ether (PPE) modified
01.01.097
01.01.113
Polyvinylidene chloride (PVDC)
01.01.120
Styrene/Butadiene-Blockcopolymer
01.01.127
Tetrafluoroethylene/perfluoroalkylvinylether
copolymers (PFA)
01.02.001
Thermoplastic elastomers dynamically crosslinked,
TPE-V/TPV
01.02.008.01
Compounds of styrenic block copolymers (SEBS,
SBS, SIS, TPE-S)
01.02.008.02
Styrenic block copolymers SEBS, SBS, SIS, TPE-S
(pure polymers)
01.02.010
Olefin based thermoplastic elastomer, TPO
01.02.012
SEBS-Blockcopolymer
01.04.025
Polyisocyanates
01.08.007
Rubber to Metal Bonding Agents or Primers and
Bonding Agents for Rubber to Metal (bonding agent or
adhesive systems)
01.08.011
Contact adhesives
01.08.017
Hot melt adhesives
01.10.051
Solid lubricants
01.10.102
Impact modifiers
01.14.002
Decorative films
Polytetrafluoroethylene (PTFE)
© 2014 Messe Düsseldorf GmbH
475
© 2014 Messe Düsseldorf GmbH
476
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.14.018
Purging compound
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.012
Masterfoam GmbH
Address
Nordwalder Str. 98
48268 Greven
Germany
Plastics products and parts for medical engineering
Phone
+49 2571 1396149
02.03.013
Plastics products and parts for furniture appliances
Fax
+49 2571 1396148
02.04.001.04
Semi finished products of polycarbonate (PC)
Internet address
www.masterfoam.de
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
E-Mail
info@masterfoam.de
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
Stand
Hall 07a, B35-2 (Page 880)
02.04.002
Films
Product Overview
02.05.068
Technical films
01.03.044
Synthetic foams
01.04.008
Polyethylene foams (PE)
01.14.024
Composite materials
02.01.005
Parts made by laminating
02.03.002
Plastics products and parts for automotive
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.015
Plastics products and parts for transport/packaging
© 2014 Messe Düsseldorf GmbH
477
Masterfoam GmbH
© 2014 Messe Düsseldorf GmbH
478
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.011
Sealings/Sealrings
02.05.056
Foam products
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
the products. There are further requirements from the area of fire protection
and emissions. These materials can be cut and blanked. Foils – or adhesive
laminations often complete the product.
Mayser GmbH & Co. KG
Product Details
02.03.002
Masterfoam GmbH
Address
Bismarckstr. 2
88161 Lindenberg
Germany
Phone
+49 8381 507-0
Fax
+49 8381 507-101
Internet address
www.mayser.de
E-Mail
schaum@mayser.de
Stand
Hall 05, C43 (Page 874)
Plastics products and parts for automotive
Felt materials
We manufacture different felt materials in large quantities. We form blanks from cotton felts, to which we often
add self-adhesive properties. In Romania, we manufacture the material on the site of a felt-producing company and are thus in the position to act rapidly and competitively. The material is often used for acoustics purposes or as product protection. Different weights, thickness and manufacturing
procedure form the basis for the product range.
We permanently hold a wide selection of materials in stock. We also process
polyester felt materials. As easy, emission-free acoustics materials they are
often used in the vehicle interiors, for instance behind the door lining. The variety
this material group offers is unlimited. If you should have any particular questions
on this matter, please do not hesitate to contact us. We would be pleased to
advise you.
02.05.056
Foam products
Product Overview
Mayser GmbH & Co. KG
02.01.007
Parts made by compression moulding
02.01.011
Parts made by termoforming
02.03.002
Plastics products and parts for automotive
02.03.013
Plastics products and parts for furniture appliances
Polyurethane foam on ether basis
Polyurethane foam mainly constists of polyol and isocyanate. Polyurethane-ether foams are mostly used,
when there is a requirement for elasticity. For instance
for upholstery, mattrasses but also for vehicle seats.
There are ether-based foams ranging from 16 to far
over 160 kg/m3 .The material performs better in wet conditions than polyesterbased polyurethane foams.
The weight and required strength of the material are needed in order to specify
© 2014 Messe Düsseldorf GmbH
479
© 2014 Messe Düsseldorf GmbH
480
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.10
Semi finished products of polyurethane (PUR)
02.05.056
Foam products
02.05.066
Structural foam parts according to sample, drawing or
customers tools
Product Details
02.01.007
02.04.001.10
Mayser GmbH & Co. KG
Parts made by compression moulding
PUR-Spezialschaumstoffe
02.01.011
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
Foam products
PUR-Spezialschaumstoffe
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
Parts made by termoforming
PUR-Spezialschaumstoffe
02.05.066
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
02.03.002
PUR-Spezialschaumstoffe
02.05.056
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
Semi finished products of polyurethane (PUR)
Structural foam parts according to sample, drawing or
customers tools
PUR-Spezialschaumstoffe
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
Plastics products and parts for automotive
PUR-Spezialschaumstoffe
Mayser entwickelt und fertigt Halbzeuge aus PURSpezialschaumstoffen: INDUCON® zellige PUR-Elastomere,
INDUSKIN ausgerüstete Schaumstoffe, INDUPHON®
Akustikschaumstoffe, INDUMONT Fahrzeuginterieursysteme und MAYSER BLUEFOAM® lichtechten PURSchaum.
© 2014 Messe Düsseldorf GmbH
481
© 2014 Messe Düsseldorf GmbH
482
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
and vibration. Our welders combine technical sophistication with ease of use.
They can be easily integrated in your production facilities.
Mecasonic
Address
Ultrasonic welding : Quick and economic join technology which offer a clean and
solid weld.
14 Rue de Deux Montagnes, Z.I. de Ville
74105 Annemasse Cedex
France
Spin welding : The ideal solution to guarantee perfect welds on circular parts :
watertight and highly resistant welds.
Phone
+33 4 50877300
Hot-plate welding : This technology is suited for large polyethylene, polyamide
parts, in a wide range of applications.
Fax
+33 4 50373147
Vibration welding : Friction energy is converted into heat by applying the necessary amounts of pressure during the vibration and cooling stages.
Internet address
www.mecasonic.com
E-Mail
mecasonic@mecasonic.com
Our international expansion has enabled us to branch out into a wide range of
fields, including food processing, automotive, cosmetics, household appliances,
electronics, entertainment, medical, metals, packaging and fabrics, to name but
a few.
Stand
Hall 11, H41 (Page 902)
Mepla s.r.o.
Product Overview
Mecasonic
02.02.005
Welding
03.05.001
Hot-plate welding machines
03.05.002
Heat impulse welding machines
03.05.004
Ultrasonic welding machines
03.05.006
Friction welding machines
Product Details
02.02.005
Mecasonic
Address
Stráznická 1518
276 01 Melnik
Czech Republic
Phone
+420 315739080
Fax
+420 315739085
Internet address
www.mepla.cz
E-Mail
info@mepla.cz
Stand
Hall 08b, E83 (Page 890)
Welding
Our technologies
Since 1969, Mecasonic has continued to grow and diversify. Our innovation
spirit has enabled us to embrace different welding technologies to meet all the
requirements. Now, we are specialized in Ultrasonics, spin welding, hot plate
© 2014 Messe Düsseldorf GmbH
483
© 2014 Messe Düsseldorf GmbH
484
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.07
Product Overview
Semi finished products of polypropylene (PP)
Mepla s.r.o.
PP (Polypropylen)- Platten *extrudiert
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
Herausragende Eigenschaften:
Allgemein:
- Wärmestabilisiert
- Wasserabweisend
Product Details
Mepla s.r.o.
- Gut zu zerspanen
- Gut warm verformbar
02.04.001.05
Semi finished products of polyethylene (PE)
- Gut schweißbar
- Geringes spezifisches Gewicht
PE-Platten (Polyethylen)
PP-H( homopolymeres Polypropylen)
Herausragende Eigenschaften:
· hohe chemische Beständigkeit
- hohe chemische Beständigkeit
· gute Tiefziehfähigkeit
- hohe Festigkeit bei Langzeitbeansp. bis 90° C
· gute Schlagzähigkeit
- DIBT zugelassene Formmasse
· stoß- und schlagfest auch bei niedrigen Temperaturen
- nagelbar
· geringes spezifisches Gewicht
- sehr gute elektrische Isoliereigenschaften
· gut schweißbar
- entsprechend BGA Empfehlung IX
· gut warm verformbar
- abnehmende Schlagzähigkeit gegen 0° C
· wasserabweisend
- physiologisch unbedenklich
- normal entflammbar DIN 4102- B2
· sehr gute elektrische Isoliereigenschaften
- für Lagerung von Lebensmitteln zugelassen
· entsprechend BGA Empfehlung IX
PPs ( flammhemmendes Polypropylen)
· für Lagerung von Lebensmitteln zugelassen
- schwer entflammbar (FL)
· physiologisch unbedenklich
- hohe chemische Beständigkeit
· geeignet für Kontakt mit Trinkwasser
- abnehmende Schlagzähigkeit gegen 0° C
· normal entflammbar DIN 4102-B2
vor UV Strahlung schützen!
PP-C ( copolymeres Polypropylen)
- hohe chemische Beständigkeit
- Gute Schlagzähigkeit
© 2014 Messe Düsseldorf GmbH
485
© 2014 Messe Düsseldorf GmbH
486
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
- hohe Festigkeit bei Langzeitbeansp. bis 90° C
02.04.001.11
Herstellung ohne umwelt- und gesundheitsgefährdende SubstanzenRecyclebar
Standardabmessungen:
Semi finished products of polyvinylchloride (PVC)
Hartschaumplatten
PP-H( homopolymeres Polypropylen)
METEX
2 x 1 m Stärke 1-40 mm
PVC–Hartschaumplatten freigeschäumt
2,44 x 1,22 m Stärke 2-30 mm
3 x 1,5 m Stärke 2-30 mm
Herausragende Eigenschaften:Feinzellige Schaumstruktur bei geschlossener Oberfläche
4 x 2 m Stärke 5-30 mmPressplatten, grau 7032
Leichtes Gewicht
2 x 1 m Stärke 20-100 mm
(ca 0,6 kg / m³)
Standardfarben: grau, natur, weiß
Gut bedruckbar, lackierbar, folierbar,
PPs( flammhemmendes Polypropylen)
Gut zu verkleben
2 x 1 m Stärke 2-20 mm
Gut zu bearbeiten mit Holz- und Metallverarbeitungs-werkzeugen und Maschinen
2,44 x 1,22 m Stärke 2-20 mm
Wetterecht und – beständig: verrottet nicht
3 x 1,5 m Stärke 2-20 mm
Standardfarben: grau
Geringe Wasseraufnahme
PP-C (copolymeres Polypropylen)
Chemikalien – und korrosionsbeständig
2 x 1 m Stärke 2-40 mm
Herstellung ohne umwelt- und gesundheitsgefährdende Substanzen
2,44 x 1,22 Stärke 2-30 mm
Abmessung:
3 x 1,5 Stärke 2-30 mm
3050 x 1560 mm
4 x 2 m Stärke 5-30mm
Dicke 2 bis 10 mm
Standardfarben: grau
freigeschäumt
Anwendungsbeispiele PP-H:
Integralschaum
- Filtergehäuse
3000 x 1250 mm
- Flachdichtungen
Dicke 15, 19, 24 mm
- Verschraubungen, Überwurfmuttern
Sonderabmessungen aus der Produktion möglich oder Zuschnitte gesägt
- Chemiepumpenteile
- Düsen
- Flanschverbindungen
- Reduzierstücke
© 2014 Messe Düsseldorf GmbH
487
© 2014 Messe Düsseldorf GmbH
488
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
MIP SAS
Address
Control of chroming surface: chrome-free area for fastenning systems
945 rue de la Plaine, ZA La Plaine
01120 Dagneux
France
Decoration on chromed parts (pad-printing, enamelling, varnish)
Specific solution for chroming small series at competitive cost: Standard support
designed by MIP
Phone
+33 4 78554115
Fax
+33 4 78551062
plastic injection
Internet address
www.mip01.com
40 to 500 tons injection molding machines
E-Mail
admnistration@mip01.com
Stand
Hall 05, D04-10 (Page 874)
02.03.002
Plastics products and parts for automotive
Parts molding up to 1,2 m long and 2,7kg.
Post injection treatment done by multi-axial robots
Heat & Cool Technology experience with the following advantages:
avoid knit lines
avoid shrinkage
Product Overview
MIP SAS
02.02.002
Galvanization
02.03.002
Plastics products and parts for automotive
Improve gloss effect (high gloss)
Wide selection of polymers (ABS, ABS/PC, PMMA, PA, etc…)
Small, medium and large manufacturing series(MOQ:500p/year)
Developped specific system to reduce cost for small series
Product Details
02.02.002
MIP SAS
In-Mold solution available
Galvanization
Plastics parts chrome
MIP proposes the creation of logos, monograms and
technical chromed parts
Chaine chrome, logo chrome, monogramme chrome,
piece plastique chrome
Chrome-platting fulfilling automotiv requests: cass test, thermical cycle, abrasion test...
Finishing : bright, satin, mat
Decoration with chrome III or chrome VI
Manufacture of Technical Chromed Parts
© 2014 Messe Düsseldorf GmbH
489
© 2014 Messe Düsseldorf GmbH
490
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Mitex GmbH Elastomertechnik
Misr el nour Co. for plastic packages
Address
Misr El-Nour Building, End of Nozha
11361 Cairo
Egypt
Phone
+20 2 22675300
Fax
+20 2 22677277
Internet address
www.misrnour.com
E-Mail
wppbags@misrnour.com
Stand
Hall 07.2, A33 (Page 888)
Address
Ludenberger Str. 36-40
40699 Erkrath
Germany
Phone
+49 211 90006-0
Fax
+49 211 246118
Internet address
www.mitex.de
E-Mail
info@mitex.de
Stand
Hall 05, D41 (Page 874)
Company News
Product Overview
20.09.2013
02.03.015
Plastics products and parts for transport/packaging
Product Details
02.03.015
Mitex GmbH Elastomertechnik
Misr el nour Co. for plastic packages
Misr el nour Co. for plastic packages
Plastics products and parts for transport/packaging
Polypropylene woven bags
Woven polypropylene bags or simply woven PP bags are
considered to be the toughest packaging bags, widely used
to pack materials for grain, milling and sugar industry. Additionally, these bags also find wide application in fodder industry, chemicals and fertilizers industry besides cement industry and other applications like sand, metal parts and concrete
etc.
Als Geschäftspartner von StateMix aus Kanada vertreibt MITEX seit neuestem
exklusiv auf dem europäischen Markt auch Vortex Mixer in unterschiedlichen
Größen. Das Mischgewicht reicht je nach Modell von 200g bis 10kg. Die Geräte
sind geeignet für das schnelle und effektive Mischen von Polyurethanen, Silikonen, Wachsen, Epoxies etc.
Product Overview
We offer 100% custom designed polypropylene woven bags
and polypropylene woven sacks as per the required specifications of the customer.
© 2014 Messe Düsseldorf GmbH
MITEX vertreibt jetzt auch Vortex Mixer für den
europäischen Markt
491
Mitex GmbH Elastomertechnik
02.05.035
Bogie wheels and runners
02.05.054
Sandwich cores
02.05.076
Rollers and roller coatings
03.10.003
Rolls
© 2014 Messe Düsseldorf GmbH
492
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.05.076
Mitex GmbH Elastomertechnik
Mitras Materials GmbH
Rollers and roller coatings
Address
Friedrich-Ochs-Str. 2
92637 Weiden
Germany
Phone
+49 961 89200
Fax
+49 961 89210
Internet address
www.mitras-materials.com
E-Mail
info@mitras-materials.com
Stand
Hall 08a, G11 (Page 894)
MITEX Calantec
MITEX Calantec for generating matt finish film sufaces.
The benefits are:
homogeneous surface regrinds possible roughness 70+/5° shore A available in 100, 200, 400 µm roughness
particularly suitable for PVC film and foil production and
others.
MITEX SoftSpreader
MITEX SoftSpreader spreader rolls are ideal for sensitive substrates and composite materials. They offer
benefits, such as:
excellent spreading no wrapping of web edges no stress
for the web contour neutral no spiral grooves or undercut perfect for delicate substrates no overstretching of foils.
Company News
10.04.2013
Mitras Materials GmbH
THERMODET® Die Marke für extrudierte Qualität
MITRAS Materials GmbH mit Sitz in Weiden in der ostbayerischen Oberpfalz, ist heute eine der führenden
Platten-Extrusionsfirmen in Europa. Das kundenorientierte, mittelständische Unternehmen ist technisch, wirtschaftlich, strategisch
und organisatorisch flexibel und leistungsfähig aufgestellt. Es verfügt über engagierte Mitarbeiter und ein branchenerfahrenes, kontinuierliches Management,
mit einem ausgezeichneten Markenimage.
MITEX UltraClean
MITEX UltraClean cleaning rollers secure that the web
is cleaned from dust and prevent new dirt build-up.
They offer the following benefits:
easy to clean, regenerating resistant to various solvents
repeated regrinding graded adhesiveness (adhesion)
antistatic permanently sticky.
They are available for different types of applications matching the process.
© 2014 Messe Düsseldorf GmbH
493
© 2014 Messe Düsseldorf GmbH
494
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Product Overview
Mitras Materials GmbH
Mitras Materials GmbH
02.01.002
02.01.002
Products made by extrusion
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.015
Plastics products and parts for transport/packaging
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
Products made by extrusion
THERMODET ABS
ABS-Verbundplatte zum Thermoformen
02.03.001
Plastics products and parts for plant building
THERMODET ASA/ABS
ASA/ABS-Verbundplatten zum Thermoformen
02.03.002
Plastics products and parts for automotive
THERMODET PMMA/ABS
PMMA/ABS-Verbundplatte zum Thermoformen
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.03.003
Plastics products and parts for building applications
THERMODET PMMA/ABS
02.04.001.08
Semi finished products of polystyrene (PS)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.002
Films
02.05.068
Technical films
02.05.074
Composite boards
© 2014 Messe Düsseldorf GmbH
PMMA/ABS-Verbundplatten zum Thermoformen
495
© 2014 Messe Düsseldorf GmbH
496
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.009
Plastics products and parts for agriculture
02.04.001.06
THERMODET PMMA/ABS
Semi finished products of polymethylmethacrylate
(PMMA)
THERMODET PMMA/ABS
02.04.001.08
Semi finished products of polystyrene (PS)
THERMODET HIPS
HIPS-Verbundplatten zum Thermoformen
02.04.001.14
02.03.011
Plastics products and parts for mechanical engineering
other and machined semi finished products / Pre-cut
parts
THERMODET ASA/ABS
THERMODET Halbzeuge
ASA/ABS-Verbundplatten zum Thermoformen
Halbzeuge zum Thermoformen
02.04.002
Films
THERMODET Folien
02.03.013
Plastics products and parts for furniture appliances
Verbundfolien zum Thermoformen
THERMODET TPE/HIPS
02.05.068
TPE/HIPS-Verbundplatte zum Thermoformen
THERMODET Folien
Technical films
Verbundfolien zum Thermoformen
02.05.074
Composite boards
THERMODET Verbundplatten
02.03.015
Plastics products and parts for transport/packaging
Verbundplatten zum Thermoformen
THERMODET TPU/ABS
TPU/ABS-Verbundplatten zum Thermoformen
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
THERMODET ABS
ABS-Verbundplatte zum Thermoformen
02.04.001.04
Semi finished products of polycarbonate (PC)
THERMODET ABS+PC
© 2014 Messe Düsseldorf GmbH
497
© 2014 Messe Düsseldorf GmbH
498
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
01.02.010
Olefin based thermoplastic elastomer, TPO
01.02.013
TPV-thermoplastic vulcanised material
01.02.014
Other thermoplastic elastomers
Mitsui Chemicals Europe GmbH
Address
Oststr. 10
40211 Düsseldorf
Germany
Phone
+49 211 17332-0
01.03.021
Maleic resins
Fax
+49 211 1719960
01.10.002
Additives, other
Internet address
www.mitsuichem.com
01.10.059
Adhesives
E-Mail
info@mcie.de
01.10.060
Coupling agents
Stand
Hall 07a, D18 (Page 880)
02.04.002
Films
02.05.056
Foam products
Product Overview
Mitsui Chemicals Europe GmbH
01.01.017
Compounds (Polymer blends)
01.01.020
Cycloolefine Polymers
01.01.039
Poly-04-methylpentene-01
Product Details
02.04.002
Mitsui Chemicals Europe GmbH
Films
T.U.X.™ (LLDPE film)
This is a high-strength cast film whose raw material
is L-LDPE (Linear Low Density Polyethylene). It has
outstanding gloss, transparency, cold resistance, good
heat seal strength, hot tack strength and sealing properties. Therefore, it is extremely effective as a sealant
film for compound films.
01.01.081
Polyethylene PE-UHMW
01.01.118
Impact modifier
01.02.001
Thermoplastic elastomers dynamically crosslinked,
TPE-V/TPV
01.02.002
02.05.056
Foam products
Paulownia™ (Foam molded polypropylene sheet)
Olefin copolymers (EP(D)M)
This is polypropylene foam sheet (expanded 3 times) with closed cell foam extrusion. It is expanding the demand as a better alternative to plywood, cardboard
and corrugated plastic.
© 2014 Messe Düsseldorf GmbH
499
© 2014 Messe Düsseldorf GmbH
500
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
07/16/2013
ML ENGRAVING srl
Discover the Micro Laser Grains
ML Engraving introduces the Micro Laser Grains, a new kind
of grains made by laser, thanks to which designers can create artistic decorations on molds.
Address
Via Presolana, 114
24020 Onore
Italy
Phone
+39 0346 72410
Fax
+39 0346 74411
Internet address
www.mlengraving.com
E-Mail
commerciale@mlengraving.com
The Micro Laser Grains offer many technical and aesthetic advantages. The
MLG can:
Stand
Hall 04, D30 (Page 870)
- maintain edges; - be engraved on welded moulds; - be engraved on EDMtreated moulds; - be easily removed without compromising the moulds; - guarantee accuracy in micro details; - create a velvet effect on the surface.
The grains: from concealing to artistic decoration
Company News
04/30/2013
Grains were born in order to conceal the defects of the
surfaces caused during the moulding phase. Moulds were
treated by means of EDM or chemical process. Not only
can the Micro Laser Grains conceal defects, but they can are
thought especially to enrich objects with geometric or artistic
decorations, patters or drawings on the entire mould or on specific areas
ML ENGRAVING srl
Micro Laser Grains are available either in ISO 1302 (N) scale and VDI (CH)
scale.
ML Engraving runs Cactooos -The Engraving Network
10/08/2013
Surface textures play a significant role in order to determine the success of a product. In a globalized and
extremely competitive market, it takes great attention
to every detail i.e. customized and complex textures,
that give a brand new look to the goods.
ML Engraving is ready to impress the visitors of K
Messe with brand new services from laser engraving
and digital co.design.
ML Engraving, the leader in mold texturing by means
of laser technology, announces the born of Cactooos – The Engraving Network.
Cactooos marks a turning point in the surface texturing on moulds because it
offers the Client the widest range of technologies available on the international
market. Cactooos is in the service of creativity to push innovation to the highest,
most extreme and most ambitious levels, increasing the perceived value of the
Client’s final product.
Cactooos provides its Clients with:
- digital design services; - engraving services; - special services; - engineering
division.
.Take a look to discover Cactooos - The Engraving Network www.cactooos.com
© 2014 Messe Düsseldorf GmbH
Digital co-design of surface textures
501
One of the most important advantages offered by the
laser is the digital work management. Traditional etching systems suffer from the gap between the design stage and the texture laying
stage, which is still manual.
Thanks to its exclusive D.R.E.® - Design Rendering Engineering, ML Engraving performs the entire production cycle through files that can be read by CAD
machines.
Amongst the many digital services, ML Engraving has developed a series of codesign processes and services that join the creative activity of the style center.
In Conceptual Texturing , given a product, the texture designers at ML Engraving
study the most appropriate textures and their placement so that the texture adds
preciousness to the product without burdening it unnecessarily. This service
includes the creation of a mini catalogue with 6-8 customized graphic proposals.
© 2014 Messe Düsseldorf GmbH
502
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
The Company has also started a research that aims at the creation of exclusive collections based on the study of trends, contaminations with art, culture,
creative elements from other
disciplines. This kind of research is already frequent in the field of materials or
geometries but nothing similar exists to date in the texture sector.
These collections will serve as inspiration for style centers and it will be possible
to personalize them with guidelines provided by designers so as to maintain the
brand’s identity.
Another ML Engraving co-design service that is much appreciated is the ability
to translate an idea, a feeling, an intuition, or a concept into a texture, into something solid. Indeed designers oftend draw inspiration from pictures, works of art
if not even evocative images, music and then search for a texture that can recall
a given effect.
There are also several reverse engineering services organized by growing degrees of complexity. From scanning with most modern software to mesh editing,
i.e. the creation of stl. Files, to inspection (conformity analysis of the 3D file) to
3D drawing, i.e. the creation of .igs files.
Come round to stand D30 at pavillon 4 .
ML Engraving - Laser or Nothing!
05/31/2013
Product Overview
ML ENGRAVING srl
02.05.047
Surface treated and decorated parts
03.04.002
Marking equipment
03.04.008
Equipment for In-Mould Decoration (IMD)
Product Details
02.05.047
ML ENGRAVING srl
Surface treated and decorated parts
3D Laser Engraving
ML Engraving provides the most sophisticated and advanced service of laser texturing on molds. ML Engraving doesn’t provide machines. On the contrary, ML Engraving is recognized as the n.1 supplier of the laser
engraving service worldwide .
ML Engraving is able to engrave 2D and 3D textures
on very complex shapes and on every size (from very
small molds up to automotive molds).
Certificate for Excellence
Laser engraving is a green, sustainable, digital and efficient technology, that offers great advantages in terms of workflow management, time saving and quality
of the final result.
ML Engraving announces that its exclusive services
for:
2D laser texturing 3D laser texturing Micro Laser Grains
texturing
have been selected by the Jury at Material Connexion for inclusion in its library, that collects the world’s
largest resource for advanced, innovative and sustainable materials and processes
Material Connexion is an international team of multidisciplinary experts that
bridge the gap between science and design to create practical manufacturing
solutionsand to help companies innovate.
ML Engraving - Laser or Nothing!
© 2014 Messe Düsseldorf GmbH
503
© 2014 Messe Düsseldorf GmbH
504
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Molde Matos S.A.
Address
02.05.073
Estrada da Nazare, 2
2431-959 Marinha Grande
Portugal
Phone
+351 244 545700
Fax
+351 244 545701
Internet address
www.moldematos.pt
E-Mail
mmatos@moldematos.pt
Stand
Hall 01, A03 (Page 864)
Valves
Valves
Own products
www.plimex.pt
www.plimat.com
Momentive Performance Materials GmbH
Address
Chemiepark Leverkusen, Gebäude V7
51368 Leverkusen
Germany
Phone
Fax
Product Overview
Molde Matos S.A.
02.01.010
Parts made by injection moulding
02.05.073
Valves
03.06.001
Injection and compression moulds
Product Details
02.01.010
Molde Matos S.A.
www.momentive.com
E-Mail
oliver.franssen@momentive.com
Stand
Hall 08a, G45 (Page 894)
Company News
10/01/2013
Parts made by injection moulding
Glasses in PC
Own products: glasses in PC
http://www .matosplas .com/EN/mp drink.html
Momentive Performance Materials GmbH
MOMENTIVE’S ENGINEERED MATERIALS SYSTEMS
HELP THE AUTOMOTIVE INDUSTRY ACHIEVE
TARGETS FOR WEIGHT, PERFORMANCE, AND
SUSTAINABILITY
Company Exhibiting at K Show Oct. 16 – 23, 2013 Booth 8a/G45
COLUMBUS, Ohio (Sept. 30, 2013) – Momentive Performance Materials Holdings LLC (“Momentive”), through its subsidiaries Momentive Specialty Chemicals Inc. (MSC) and Momentive Performance Materials Inc. (MPM), will be
showcasing a number of products for the automotive industry at the upcoming K
Show in Dusseldorf, Germany. Momentive is a leading global supplier of epoxy,
phenolic, silicone, and silane specialty engineered material systems and addi-
injection mouldings
subcontract
injection machines from 55T to 400T
© 2014 Messe Düsseldorf GmbH
Internet address
505
© 2014 Messe Düsseldorf GmbH
506
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
tives designed to enable auto manufacturers and their suppliers to build lighter
weight, higher performing cars that can achieve demanding sustainability and
fuel efficiency targets.
Momentive’s automotive technologies to be featured at the K 2013 include:
- Fast-curing EPIKOTETM epoxy resin systems and EPIKURETM curing agents
enable parts manufacturers to produce lightweight carbon fiber-reinforced structural body parts in cycle times as short as two minutes. Epoxy-carbon fiber
composite parts can generate up to 60 percent weight savings over their metal
counterparts.
- MPM is introducing SilFORT* UVHC5000 coating, with improved weatherability
that helps protect parts made of clear polycarbonate against abrasion, chemical
damage, and degradation caused by UV radiation. UVHC 5000 coating is ideally
suited for automotive forward lighting applications.
- SILOPREN* silicone elastomers find use in a variety of applications under
the hood due to their resistance to heat and automotive fluids. MPM continues to innovate with SILOPREN Liquid Silicone Rubber (LSR) technology, and
the glass-clear LSR 7000 series is a new alternative to glass and transparent
thermoplastics in high power LED lighting.
- New enhancements in BAKELITE® engineering thermoset compounds enable
manufacturers to use injection or compression molding for lightweight, highperformance parts for under-the-hood applications such as pulleys, pumps and
housings. Parts made of BAKELITE® engineering thermosets have demonstrated weight savings of up to 40 percent versus aluminum.
- NXT* silane additives are enabling tire manufacturers to produce low rolling
resistance with improved wet traction and stopping power compared to standard
sulfur silanes. NXT low-VOC silane additives also can help tire manufacturers
reduce ethanol emissions during manufacture by more than 60 percent.
- MPM’s NIAX* additives are used in molded foam for automotive seating and
for polyurethane-based headliners, headrests, dashboards, and noise dampers.
NIAX additives offer reduced volatile organic compound (VOC) emissions and
enhanced processing characteristics, while helping to reduce foam weight.
- MPM’s Cool FX* hybrid fillers increase thermal conductivity of thermoplastics,
yet allow the materials to retain electrical resistance and remain suitable for injection molding. This combination of properties is leading to applications where
space constraints and heat management are concerns, such as LED lighting.
With a broad range of technologies, decades of industry experience, and proven
materials systems, Momentive is a trusted partner to many automotive parts
manufacturers around the world. And with its global manufacturing network and
research, applications and support centers, the Company is able to serve OEMs
© 2014 Messe Düsseldorf GmbH
507
around the world.
Learn more about these and many other Momentive specialty materials, technologies and applications by visiting with the Momentive automotive team in
Booth 8a/G45 at the K 2013 Trade Fair, Oct. 16-23, in Dusseldorf, Germany.
About Momentive Specialty Chemicals
Based in Columbus, Ohio, Momentive Specialty Chemicals Inc. is the global
leader in thermoset resins. Momentive Specialty Chemicals Inc. serves global
industrial markets through a broad range of thermoset technologies, specialty
products and technical support for customers in a diverse range of applications
and industries. Momentive Specialty Chemicals Inc. is an indirect wholly owned
subsidiary of Momentive Performance Materials Holdings LLC.
About Momentive Performance Materials
Based in Waterford, New York, Momentive Performance Materials Inc. is a
global leader in silicones and advanced materials, with a 70-year heritage of being first to market with performance applications for major industries that support
and improve everyday life. The Company delivers science-based solutions by
linking custom technology platforms to opportunities for customers. Momentive
Performance Materials Inc. is an indirect wholly-owned subsidiary of Momentive
Performance Materials Holdings LLC.
About Momentive
Momentive Performance Materials Holdings LLC (“Momentive”) is the ultimate
parent company of Momentive Performance Materials Inc. and Momentive Specialty Chemicals Inc. Momentive is a global leader in specialty chemicals and
materials, with a broad range of advanced specialty products that help industrial
and consumer companies support and improve everyday life. Its technology
portfolio delivers tailored solutions to meet the diverse needs of its customers
around the world. Momentive was formed in October 2010 through the combination of entities that indirectly owned Momentive Performance Materials Inc. and
Hexion Specialty Chemicals Inc. The capital structures and legal entity structures of both Momentive Performance Materials Inc. and Momentive Specialty
Chemicals Inc. (formerly known as Hexion Specialty Chemicals, Inc.), and their
respective subsidiaries and direct parent companies, remain separate. Momentive Performance Materials Inc. and Momentive Specialty Chemicals Inc. file
separate financial and other reports with the Securities and Exchange Commission. Momentive is controlled by investment funds affiliated with Apollo Global
Management, LLC. Additional information about Momentive and its products is
available at www.momentive.com.
TM, ® Denotes trademarks owned by or licensed to Momentive Specialty Chemicals Inc.
© 2014 Messe Düsseldorf GmbH
508
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
* Denotes trademarks owned by or licensed to Momentive Performance Materials Inc.
###
Media Contact:
Trisha McGuire
704-992-4797
trisha.mcguire@momentive.com
07/23/2013
MOMENTIVE PERFORMANCE MATERIALS TO
SHOWCASE A RANGE OF MATERIALS FROM
ELASTOMERS TO COATINGS AT K 2013
INTERNATIONAL TRADE FAIR
New solutions could allow for revolutionary advancements in a number of industries including automotive, electronic and medical
WATERFORD, N.Y. (July 23, 2013) – Momentive Performance Materials Inc.
(MPM) will feature a wide array of materials at the K 2013 international trade
fair October 16-23 in Düsseldorf, Germany. The materials MPM will showcase
– primarily silicone elastomers and hard coats – provide a diverse yet comprehensive set of materials to be considered for use in a number of applications in
the plastics and rubber industries. As a pioneer of liquid silicone rubber (LSR)
technology and a leader in the field of weatherable coatings, MPM continues to
evolve the technology to meet today’s demands and needs. It will demonstrate
its latest advancement in LSRs, UV-curing LSR, during the fair. In partnership
with Engel and Elmet, MPM will showcase a demonstration of the UV-curing LSR
process for injection molding at booth 8a/G45 by producing a two-component
design object.
Following are highlights of additional elastomers and coatings MPM will feature
at the fair.
Elastomers
UV-Curing Liquid Silicone Rubber (LSR) MPM’s breakthrough UV-curing LSR
has expanded the range of design possibilities involving multi-component injection molding. Traditionally, two-component or multi-component designs utilizing
silicone elastomers had been limited to the combination of heat stable resins
such as PA or PBT due to the molding temperatures that were required to vulcanize the silicone. Now, UV-curing LSR can be combined with more affordable, lower melting point resins, such as PP, enabling new concepts. Designers
can explore completely new integrated material approaches in devices such as
valves, syringe components, lab ware, diagnostic devices, catheters, respiratory
© 2014 Messe Düsseldorf GmbH
509
devices and kitchenware, or they can develop totally new products.
Ultra Clear Liquid Silicone Rubber By providing optical clarity, durability and design freedom, the Ultra Clear Silopren* LSR 7000 series can serve a wide range
of industries and applications where the combination of high transparency, excellent heat and radiation resistance with high yield production in low cycle times
is relevant. These types of applications include automotive lighting, electronics,
solar and interior/exterior lighting. The new LSR 7090 with a hardness of 42
Shore D can reduce dust pickup of finished parts while maintaining the excellent
processability of the Ultra Clear LSR 7000 family in LSR mass production.
Silopren Oil-Bleed Liquid Silicone Rubber Silopren LSR 3696/25 liquid silicone
rubber is a new self-lubricating LSR that provides an ultra-low compression set,
low hardness and low modulus. Given the complexity created in miniaturization
of connectors, it can be beneficial for family or mat seals in connector applications. And, LSR processing is a significant benefit in the connector industry due to the numerous parts required and the low-defect quality expectations
in low parts per million (ppm) range. Unlike the commonly-used peroxide and
addition-cured high consistency rubber compounds, it is possible for manufacturers to execute fully automated, flash-less and trim-free LSR molding in a short
cycle time.
Silplus* HT High Consistency Rubber With the introduction of its new Silplus
HT grades, MPM adds high consistency rubber (HCR) bases with high heat
resistance to its global Silplus portfolio. The new grades, available in 40, 70
and 80 Shore A hardness, can enable the development of highly heat-stable
silicone compounds for a variety of applications with heat exposure from 200 to
300°C. Potential applications include pressure hoses such as in turbocharger
systems; seals and gaskets for aerospace and aviation; as well as mold making
with jewelry casting, for example.
Fiber-Reinforced LSR MPM has also developed a new fiber-reinforced LSR that
combines silicone elastomer flexibility with the high strength of textile fibers. This
advancement can potentially serve as a mono-material concept providing the design freedom and cost-efficient processability of liquid silicone rubber. Targeted
at the consumer market, sample testing has indicated that the use of this LSR
may be in compliance with applicable FDA regulations and ISO 10993. Fiberreinforced LSR can be a good solution to consider where elastomeric properties
have to be combined with very high modulus at low elongations. Typically, manufacturers have used dedicated textile reinforcement, either through knitted endless fibers or the addition of textile fabric layers in the composite part production
for that type of application.
Coatings
SilFORT* UVHC5000 Hardcoat MPM is introducing the next generation of
© 2014 Messe Düsseldorf GmbH
510
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
UV curable hardcoats – UVHC5000; a coating with improved weatherability.
UVHC5000 helps provide protection to parts made out of clear polycarbonate
against abrasion, chemical damage and degradation caused by ultraviolet radiation. Potential fields of application include headlamp lenses for forward lighting
and exterior architectural sheets. The use of this product has been approved by
the AMECA and ECE.
SilFORT FHC615 Hardcoat With a unique combination of abrasion resistance,
flexibility and long-term outdoor performance, FHC615 weatherable hardcoat
can enable use of coated sheet stock for various end applications that need a
thermoformed article. Typical applications include windshields for motorcycles,
ATVs and golf carts, as well as helmet visors.
SilFORT UVHC9000 Hardcoat An excellent candidate to consider for longterm protection of printed surfaces, UVHC9000 is a weatherable and abrasionresistant coating that can be applied through a digital printing process. The
chemistry helps provide UV-protection to digitally printed surfaces, as well as
scratch resistance. The coating may be considered for use in applications such
as architectural products and signage.
SilFORT PHC XH100 Hardcoat PHC XH100 is an ultra-hard coating for polycarbonate and polymethylmethacrylate substrates. It is an excellent candidate to
consider for applications where lightweighting and scratch resistance are key.
Visit booth 8a/G45 at K 2013 or www.Momentive.com to learn more.
About the Company Momentive Performance Materials Inc. is a global leader in
silicones and advanced materials, with a 70-year heritage of being first to market with performance applications for major industries that support and improve
everyday life. The Company delivers science-based solutions by linking custom
technology platforms to opportunities for customers. Momentive Performance
Materials Inc. is an indirect wholly-owned subsidiary of Momentive Performance
Materials Holdings LLC.
About Momentive Momentive Performance Materials Holdings LLC (“Momentive”) is the ultimate parent company of Momentive Performance Materials Inc.
and Momentive Specialty Chemicals Inc. Momentive is a global leader in specialty chemicals and materials, with a broad range of advanced specialty products that help industrial and consumer companies support and improve everyday life. Its technology portfolio delivers tailored solutions to meet the diverse
needs of its customers around the world. Momentive was formed in October
2010 through the combination of entities that indirectly owned Momentive Performance Materials Inc. and Hexion Specialty Chemicals Inc. The capital structures and legal entity structures of both Momentive Performance Materials Inc.
and Momentive Specialty Chemicals Inc. (formerly known as Hexion Specialty
Chemicals, Inc.), and their respective subsidiaries and direct parent companies,
© 2014 Messe Düsseldorf GmbH
511
remain separate. Momentive Performance Materials Inc. and Momentive Specialty Chemicals Inc. file separate financial and other reports with the Securities
and Exchange Commission. Momentive is controlled by investment funds affiliated with Apollo Global Management, LLC. Additional information about Momentive and its products is available at www.momentive.com.
Media Contact: Trisha McGuire Strategic Marketing Communications Manager
Momentive Performance Materials Inc. +1-704-992-4797 trisha.mcguire@momentive.com
###
*Silopren is a trademark of Bayer AG, used under license.
*Silplus and SilFORT are trademarks of Momentive Performance Materials Inc.
08/06/2013
MOMENTIVE PERFORMANCE MATERIALS TO EXHIBIT
LATEST BREAKTHROUGH IN LSR TECHNOLOGY AT K
2013 TRADE FAIR
UV-curing liquid silicone rubber can enable new concepts and part designs in
multi-component molding
LEVERKUSEN, Germany (July 30, 2013) – Momentive Performance Materials
GmbH (MPM) will feature its latest breakthrough in liquid silicone rubber (LSR)
technology, UV-curing LSR, at the K 2013 international trade fair October 1623, in Düsseldorf, Germany. MPM will demonstrate, in cooperation with Engel
injection molding machines and Elmet as the supplier of mold and technology, a
totally new approach for hard-soft combinations by producing a design object in a
fully automated process utilizing MPM’s UV-curing LSR, UV LSR 2030. With this
latest advancement in UV-curing LSR, the range of design possibilities involving
multi-component injection molding is significantly expanded.
The displayed Engel e-mac 170/50, including the viper 6 robot, is set up as
a standard plastics injection molding machine. The Elmet mold is designed to
cure the LSR by UV light transmission through the pre-molded PP part, enabling
the cold curing process in short cycle time. Another innovation is Elmet’s newly
developed, dedicated pumping and feeding equipment optimized for UV-curing
LSR.
Traditionally, multi-component designs utilizing silicone rubbers were limited to
the combination of heat stable resins such as PA or PBT due to the molding
temperatures that were required to vulcanize the silicone. Now, UV LSR can
be combined with more affordable, lower melting point resins, such as PP or
PMMA, enabling new approaches for hard-soft combinations with silicone rubber in consumer goods or medical applications. In addition, this new technology
can enable designers to combine silicones with temperature-sensitive electron-
© 2014 Messe Düsseldorf GmbH
512
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ics or incorporate temperature-sensitive ingredients into the silicone that normally would not resist conventional molding temperatures. Designers can explore completely new integrated material approaches in devices such as valves,
syringe components, lab ware, diagnostic devices, catheters, respiratory devices, kitchenware or completely new products.
Until MPM introduced UV-curing silicone rubbers, heat had always been a limiting factor for designers and manufacturers when selecting material for substrates and inserts to combine with silicone. Customers had always been limited to using more costly, heat-stable materials – a certain impediment to realizing the full innovative potential of silicone elastomer’s unique features including
heat stability, weatherability, low temperature flexibility, chemical resistance, low
hardness, insulation, biocompatibility and easy processing.
There are also significant potential processing and manufacturing benefits to
realize with UV-curing LSR including:
• Reduced cycle times: articles – especially articles with high wall thickness like
cable accessories or high voltage insulators – can cure much faster than with
conventional silicone elastomers. • Improved sustainability: low temperature
cure typically requires much less energy than traditional silicone processing. •
Significant cost savings: customers may now consider more affordable resins,
utilize less floor space for equipment, and reduce operation costs.
Please contact Trisha McGuire at trisha.mcguire@momentive.com for a fact
sheet on additional silicone elastomers that MPM will be showcasing at K 2013.
Also, you may visit booth 8a/G45 or www.momentive.com to learn more.
About the Company Momentive Performance Materials Inc. is a global leader in
silicones and advanced materials, with a 70-year heritage of being first to market with performance applications for major industries that support and improve
everyday life. The Company delivers science-based solutions by linking custom
technology platforms to opportunities for customers. Momentive Performance
Materials Inc. is an indirect wholly-owned subsidiary of Momentive Performance
Materials Holdings LLC.
About Momentive Momentive Performance Materials Holdings LLC (“Momentive”) is the ultimate parent company of Momentive Performance Materials Inc.
and Momentive Specialty Chemicals Inc. Momentive is a global leader in specialty chemicals and materials, with a broad range of advanced specialty products that help industrial and consumer companies support and improve everyday life. Its technology portfolio delivers tailored solutions to meet the diverse
needs of its customers around the world. Momentive was formed in October
2010 through the combination of entities that indirectly owned Momentive Performance Materials Inc. and Hexion Specialty Chemicals Inc. The capital structures and legal entity structures of both Momentive Performance Materials Inc.
© 2014 Messe Düsseldorf GmbH
513
and Momentive Specialty Chemicals Inc. (formerly known as Hexion Specialty
Chemicals, Inc.), and their respective subsidiaries and direct parent companies,
remain separate. Momentive Performance Materials Inc. and Momentive Specialty Chemicals Inc. file separate financial and other reports with the Securities
and Exchange Commission. Momentive is controlled by investment funds affiliated with Apollo Global Management, LLC. Additional information about Momentive and its products is available at www.momentive.com.
Media Contact: Trisha McGuire Strategic Marketing Communications Manager
Momentive Performance Materials Inc. +1-704-992-4797 trisha.mcguire@momentive.com
###
Product Overview
Momentive Performance Materials GmbH
01.03.007
Epoxy resins (EP)
01.03.030
Phenol/formaldehyde resin moulding compounds (PF)
01.05.022
Silicone rubber (SI)
01.05.023
Silicone rubber 02-componemtic, liquid, incl.
auxiliaries
01.05.024
Silicone rubber MVQ rigid incl. Auxiliaries
01.13.041
Silanes
01.14.012
Paints, coatings
02.03.002
Plastics products and parts for automotive
© 2014 Messe Düsseldorf GmbH
514
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Motzener Kunststoff- und Gummiverarbeitung
GmbH
Address
Mittenwalder Str. 79
15749 Mittenwalde OT Motzen / Brandenburg
Germany
Phone
+49 33769 8940
Fax
+49 33769 61921
Internet address
www.kunststoff-gummi.de
E-Mail
motzener@kunststoff-gummi.de
Stand
Hall 08b, E61-9 (Page 890)
02.04.003.03
Parts from high performance thermoplastics
02.05.011
Sealings/Sealrings
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.05.027
Rubber / plastics combinations
02.05.041
Membranes
02.05.069
Parts of industrial laminates
03.06.001
Injection and compression moulds
Product Details
02.01.010
Product Overview
Motzener Kunststoff- und Gummiverarbeitung GmbH
Motzener Kunststoff- und Gummiverarbeitung GmbH
Parts made by injection moulding
spritzgegossene Formteile
02.01.010
Parts made by injection moulding
bis 300g aus technischen Thermoplasten und Thermoelasten, z.B. Halterungen und Abdeckungen.
02.03.002
Plastics products and parts for automotive
spritzgegossene Formteile
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.011
Plastics products and parts for mechanical engineering
02.04.003.02
Parts from engineering plastics
bis 300g aus technischen Thermoplasten und Thermoelasten, z.B. Dichtungsrahmen.
spritzgegossene Formteile
bis 300g aus technischen Thermoplasten und Thermoelasten, z.B. Gehäuse für Pumpen, zusammengesetzt aus verschiedenen Formteilen, Mehrkomponentenformteile, Hartweichverbindungen.
02.03.006
Plastics products and parts for electro-/household appliance
Faltenbälge für den Fahrzeugbereich
Faltenbälge aus Elastomeren und thermoelastischen
Werkstoffen, Staubkappen und Abdeckungen
© 2014 Messe Düsseldorf GmbH
515
© 2014 Messe Düsseldorf GmbH
516
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.007
Plastics products and parts for electrical engineering
einstufig spritzgegossene Formteile aus Kunststoff und
Kautschuk als Hartweich-Verbindungen, mit eingespritzten
Dichtungen, chemisch fest verbunden und mechanisch
hinterspritzt.
technische Formteile für den Mobilfunk/-telefone
spritzgegossene Formteile bis 300g aus technischen
Thermoplasten und Thermoelasten wie z.B. Halterungen für Mobiltelefone im Armaturenbereich und Gehäuseschalen als Zweikomponententeil
02.04.003.03
02.05.041
Membranes
Membranen einstufig spritzgegossene
Parts from high performance thermoplastics
einstufig spritzgegossene Membranen für die Gerätetechnik aus Kunststoff und Kautschuk auch für zertifizierte
Anwendungen.
spritzgegossene Formteile aus Spezialwerkstoffen
spritzgegossene Formteile aus hochtemperaturbeständigen Werkstoffen, wie PEEK und Werkstoffe mit Flammschutz
02.05.011
Formteile aus Kunststoff und Kautschuk -Hartweichverbindung
Moulages Industriels du Haut-Bugey
Sealings/Sealrings
Address
Parc Industriel de Nerciat, 215 Voie
01100 Groissiat
France
Phone
+33 4 74817110
Kondensatordichtscheibe und sonstige Formteile
Kondensatordichtscheiben aus Kunststoff und Kautschuk
einstufig im Spritzgießverfahren hergestellt, sonstige
Formteile aus Thermoplasten für die Kondensatorindustrie, wie z.B. Anschlussgehäuse.
Fax
spritzgegossene Dichtungen und O-Ringe
Dichtungen und O-Ringe bis zu einem Durchmesser
von 1.500mm in allen Kautschuktypen, außer LSR
02.05.024
Internet address
www.mihb.com
E-Mail
sales@mihb.com
Stand
Hall 03, E73-1 (Page 868)
Glass-fibre reinforced plastic parts (GRP)
spritzgegossene Formteile in GFK
Glasfaserverstärkte Formteile für technische Anwendungen in allen Bereichen vom Fahrzeugbau bis zum
Maschinenbau mit Glasfasern und Glaskugeln bis zu
50% Volumenanteil
02.05.027
Rubber / plastics combinations
© 2014 Messe Düsseldorf GmbH
517
© 2014 Messe Düsseldorf GmbH
518
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
MTN Mould & Plastic Industry
Product Overview
Moulages Industriels du Haut-Bugey
02.01.002
Products made by extrusion
02.01.010
Parts made by injection moulding
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.007
Plastics products and parts for electrical engineering
02.03.011
Plastics products and parts for mechanical engineering
Product Details
02.01.002
Address
IOSB (Ikitelli Organize Sanayi Bölgesi)
34306 Basaksehir / Istanbul
Turkey
Phone
+90 212 6752780
Fax
+90 212 6752783
Internet address
www.mtn.com.tr
E-Mail
sales@mtn.com.tr
Stand
Hall 02, E14 (Page 866)
Moulages Industriels du Haut-Bugey
Company News
Products made by extrusion
MTN Mould & Plastic Industry
Values
08/06/2013
Commitment spirit
1995 - MTN Set Up in TURKEY
Leading for excellence.
2009 - Produced first 2K Index Type Mold. CMM and
testing labrotary has been opened.
Through its teams, their unity and their involvement, MIHB is involved in technical and cosmetics parts producion. Constant questioning, evaluation and continuous improvement motivate us in the pursuit of excellence.
Focus on the futur.
Company News
2010- Three R&D projects completed successfully.
2011- Became well known name in Market for 2K application for plastic injection molds.
«The best way to predict the future is to create it» said Peter Drucker. So we naturally invest in research and development. Our teams are sensitive to observing,
listening technologies, observers uses consideration to offer to our customers
the future solutions.
2012- Started to export molds for grill, housing and reflect parts for well known
automotive brands.
As a plastic industry manufacturer, we have an important role in environnemental
topic.
FAKUMA 2014 14.–18. OCTOBER 2014 FRIEDRICHSHAFEN
K-2013 16.-23. October 2013 in DÜSSELDORF
ROSMOULD 2014 June 17 – 19, 2014 MOSCOW
We change our behaviors and attitudes to implement best practices and we
innovate to answer to present and future challenges. We believe in frugality and
strive to grow and share in this area.
© 2014 Messe Düsseldorf GmbH
519
© 2014 Messe Düsseldorf GmbH
520
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.005
Product Overview
MTN Mould & Plastic Industry
02.03.002
Plastics products and parts for automotive
02.03.005
Plastics products and parts for household/consumer
02.03.006
Plastics products and parts for electro-/household
appliance
Plastics products and parts for household/consumer
Parts produced for fridge
02.04.003.02
Parts from engineering plastics
Analysis
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
02.03.015
Plastics products and parts for transport/packaging
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
03.06.001
Injection and compression moulds
Product Details
02.03.002
Murtfeldt Kunststoffe GmbH & Co. KG
MTN Mould & Plastic Industry
Address
Hesslingsweg 14-16
44309 Dortmund
Germany
Phone
+49 231 20609-0
Fax
+49 231 251021
Internet address
www.murtfeldt.de
E-Mail
info@murtfeldt.de
Stand
Hall 07a, B36 (Page 880)
Plastics products and parts for automotive
Parts produced for automotive
© 2014 Messe Düsseldorf GmbH
521
© 2014 Messe Düsseldorf GmbH
522
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.05.034
Bearing boxes, bushes and sections
02.05.035
Bogie wheels and runners
02.05.080
Toothed wheels and racks
Murtfeldt Kunststoffe GmbH & Co. KG
02.01.006
Parts made by mechanical treating
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.009
Plastics products and parts for agriculture
Product Details
02.03.001
Murtfeldt Kunststoffe GmbH & Co. KG
Plastics products and parts for plant building
Förderschnecken aus Kunststoff
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
Murtfeldt bietet ein breitgefächertes Fertigungsspektrum an individuellen Förderschnecken aus Kunststoff.
Sie alle transportieren Güter stetig, schnell und schonend.
Aktuell hat Murtfeldt sein Sortiment an Förderschnecken um individuell gefertigte Schnecken mit Antriebseigenschaften erweitert. Diese befördern nicht nur
Güter, sondern treiben zudem dank Außenverzahnung andere Schnecken (z.B.
Dosierschnecken und Transportschnecken) an.
Derzeit produziert Murtfeldt links- und rechtsgängige Schneckenelemente von
18 mm bis 300 mm Durchmesser. Die maximale Gesamtlänge aus einem Stück
beträgt 1500 mm.
02.03.002
Plastics products and parts for automotive
Original Werkstoff ”S”® plus+ LF ESD
© 2014 Messe Düsseldorf GmbH
523
Der Einsatz dieses neuen Werkstoffes spart Energie und steigert
dank geringem Reibwiderstand die Effizienz Ihrer Maschinen.
Bis zu 50 Prozent ist bei diesem Material der Gleitreibungskoeffizient reduziert - und somit auch der Energieaufwand für
die gewünschte Antriebsleistung. Der Werkstoff bietet also
echtes Einsparungspotenzial. Dank des verwendeten Additivs ist Original Werkstoff ”S”® plus + LF ESD elektrisch leitfähig. Dies ermöglicht einen Spannungsabbau in maximaler
Gewschwindigkeit bei gleichzeitig minimalem Reibwiderstand. Das Material enspricht den europäischen und amerikanischen Richtlinien für den Einsatz der
Lebensmittel.
© 2014 Messe Düsseldorf GmbH
524
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.014
Plastics products and parts for food processing industry
Neilson Hot Stamper Machinery Co. Ltd.
Address
5F-6, No. 28, Ln. 123, Sec. 6, Minguan
11490 Taipei
Taiwan
Phone
+886 2 87922351
Fax
+886 2 87922317
Internet address
www.neilson.com.tw
E-Mail
neilson.max@msa.hinet.net
Stand
Hall 04, E12 (Page 870)
Murytal® C blau [FS]
Murytal® C blau [FS] - der blaue POM-Werkstoff aus
dem Hause Murtfeldt - eignet sich aufgrund seiner
Farbe ausgezeichnet für den Einsatz im Lebensmittelbereich. Durch sein fein-kristallines Gefüge in Verbindung
mit einer hohen Streckgrenze verfügt Murytal® C blau
[FS] über ein hohes Rückstellvermögen.
02.05.034
Bearing boxes, bushes and sections
Murlubric®
In dieses modifizierte Gusspolyamid wird während der
Polymerisation ein mineralisches Öl eingebunden. Dadurch
wirkt das Material selbstschmierend und behält dadurch
seine hervorragenden Eigenschaften garantiert über
die gesamte Lebensdauer. Dies senkt Ihre Betriebsund Wartungskosten deutlich.
Product Overview
Kaum ein Werkstoff unseres Sortiments verfügt über bessere Gleiteigenschaften.
Zudem verfügt Murlubric® über ausgezeichnete Verschleißeigenschaften und
eignet sich auch bei hohen Geschwindigkeiten für stark beanspruchte Gleit- und
Verschleißanwendungen.
01.14.002
Decorative films
02.02.003
Printing
03.04.001
Printing equipment for plastic and rubber products
Product Details
Murylon® HT
Der Einsatz dieses hochtemperaturbeständigen Polyamides
ermöglicht die zuverlässige Anwendung bis zu einer
Dauergebrauchstemperatur von +155 °C. Der Werkstoff behält Steifigkeit und Kriechfestigkeit über einen
größeren Temperaturbereich als andere Murylon®-Typen.
Durch seine erhöhte Widerstandsfähigkeit gegenüber
oxidativem Abbau wird er hauptsächlich bei Anwendungen oberhalb von +80°C
eingesetzt.
© 2014 Messe Düsseldorf GmbH
Neilson Hot Stamper Machinery Co. Ltd.
525
02.02.003
Neilson Hot Stamper Machinery Co. Ltd.
Printing
Heat Transfer Machine
Neilson Company ” is established as professional manufacturer of hot stamping machines & transfer printing
machines since 1975. We have more than 50 models
including hand pressure, air pressure, hydraulic types,
roller types, fully automatic machines, and we can produce special machines to find your real need. These machines can stamp &
print the plastic products, papers, cloths, clock, wood, shoe pad, shoe covers,
leather goods, cosmetics, toys, pen holders, book binding, and farm of TV, radio,
© 2014 Messe Düsseldorf GmbH
526
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
photo, extrusion profile, conic shape buckets etc.
For supplying more competitive machines to our customers, we established a
factory in China to produce our machines. We import all spare parts from Taiwan,
”electric component..etc” and we are the sole owners of the factory, so quality &
delivery time can be under control. The China machines can get same guaranty
as Taiwan machines but with cheaper price!
To better sever our customers, who have bought our transfer machines, we established the ”SUNNY TRANSFER FOIL CO ”to produce the transfer printing
films & in mold label for plastic products, i.e. table, chair, plate, ruler, pencil box,
plastic house ware products, shampoo bottle, cap, cup, buckets... and etc.
Product Overview
NHH Coltec Ltd.
01.10.047
Masterbatches
02.04.004
Compounds/Recyclates
Product Details
02.04.004
NHH Coltec Ltd.
Compounds/Recyclates
Profile extrusion
Main Products:
NEILSON:
Hot Stamping Machine, Transfer Printing Machine, and Transfer Printing Machine for Picture Frame, Automatic Heat Transfer Machine for Pen or other round
object.Machine for print on the big size buckets, conic shape cups...etc
Silicon Rubber Sheet, Silicon Rubber Roller, Silicon Die, Mold, jig, etc.
SUNNY:
Transfer Printing film, and In mold label
Nippon Gohsei Europe GmbH
Address
Merowingerplatz 1a
40225 Düsseldorf
Germany
Phone
+49 211 385488-0
Fax
+49 211 385488-29
Internet address
www.nippon-gohsei.com
E-Mail
h.reimann@nichigo-europe.de
Stand
Hall 07a, C30 (Page 880)
NHH Coltec Ltd.
Address
Phone
Fax
Internet address
Unit 6, 6/F, Hopeful Factory Centre, 10
Shatin, N.T., Hong Kong
China, Hongkong, Special Administrative Region
+852 26931663
+852 26940877
www.nhh.com.hk
E-Mail
info@nhh.com.hk
Stand
Hall 01, A25-6 (Page 864)
© 2014 Messe Düsseldorf GmbH
527
© 2014 Messe Düsseldorf GmbH
528
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.005
Plastics products and parts for household/consumer
02.03.007
Plastics products and parts for electrical engineering
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.013
Plastics products and parts for furniture appliances
02.03.015
Plastics products and parts for transport/packaging
02.05.061
Protective covers, hoods and wrappers
Nippon Gohsei Europe GmbH
01.01.009
Barrier plastics
01.01.010.01
Bioplastics, Fossil-based
01.01.010.03
Bioplastics, biologically degradable
01.01.030
Ethylene/vinyl alcohol copolymers (E/VAL)
01.01.032
Granulates
01.01.103
Polyvinyl alcohol (PVAL)
01.03.027
Methacrylat binders for polymer concrete
01.08.002
Binders
01.08.008
Pressure sensitive adhesives
01.08.012
Solvent-based adhesives
01.09.026
Polyvinyl alcohols (PVAL)
01.10.060
Coupling agents
01.13.028
Isocyanates
Product Details
02.03.003
Nippon Gohsei Europe GmbH
Plastics products and parts for building applications
Nichigo G-Tape
02.03.005
Plastics products and parts for household/consumer
Nichigo G-Polymer
01.13.048
Vinyl acetate
02.01.005
Parts made by laminating
02.03.001
Plastics products and parts for plant building
Nichigo G-Polymer combines features from PVOH and EVOH:
Properties:
Extrudability - Gas Barrier Properties against oxygen, nitrogen, carbon dioxide,
hydrogen, etc. - Solvent & Chemical Resistance - High Transparency- High
Orientability - Dispersibility of organic/inorganic substances - Emulsifier - Water
Solubility -Biodegradability
Applications:
Film - Sheet - Bottle - Fiber - Paper - Emulsion - Gas Barrier Material for industrial
and food packaging - Water-soluble nonwoven textile - Emulsifier for acrylic and
styren acrylic emulsions - Inkjet Media
Processing Methods:
© 2014 Messe Düsseldorf GmbH
529
© 2014 Messe Düsseldorf GmbH
530
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Extrusion - Spunbond - Injection - Solution Coating
Product Overview
02.03.015
Novotex Italiana S.p.A.
Plastics products and parts for transport/packaging
Nichigo G-POLYMER
Nichigo G-Polymer combines features from PVOH and EVOH:
01.01.032
Granulates
01.01.037
Masterbatches
01.01.100
Polyurethane thermoplastic (PUR)
01.02.007
PUR-Elastomers
01.03.039
PU elastomers
01.08.001
Flock-adhesive
01.08.012
Solvent-based adhesives
01.08.018
Textil finishes
01.10.002
Additives, other
02.01.002
Products made by extrusion
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.04.002
Films
02.05.031
Hot melt films
02.05.042
Membrane films
Properties:
Extrudability - Gas Barrier Properties against oxygen, nitrogen, carbon dioxide,
hydrogen, etc. - Solvent & Chemical Resistance - High Transparency- High
Orientability - Dispersibility of organic/inorganic substances - Emulsifier - Water
Solubility -Biodegradability
Applications:
Film - Sheet - Bottle - Fiber - Paper - Emulsion - Gas Barrier Material for industrial
and food packaging - Water-soluble nonwoven textile - Emulsifier for acrylic and
styren acrylic emulsions - Inkjet Media
Processing Methods:
Extrusion - Spunbond - Injection - Solution Coating
Novotex Italiana S.p.A.
Address
Via Enrico Fermi, 20 - Loc. Bonirola
20083 Gaggiano / MI
Italy
Phone
+39 02 9082941
Fax
+39 02 90829499
Internet address
www.novotex.it
E-Mail
info@novotex.it
Stand
Hall 05, C19 (Page 874)
© 2014 Messe Düsseldorf GmbH
531
© 2014 Messe Düsseldorf GmbH
532
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Novotex Italiana S.p.A.
Product Overview
02.04.002
Nowofol Kunststoffprodukte GmbH & Co. KG
Films
02.01.002
Products made by extrusion
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.007
Plastics products and parts for electrical engineering
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.002
Films
02.05.015
Electrical installation material
02.05.031
Hot melt films
02.05.042
Membrane films
02.05.062
Welding foil
Waterproof and breathable membranes
Hydrophilic – thermoplastic polyurethane membrane
ideal for technical and sportive garments as well as various medical applications. It is available with different levels of breathability,
available in thicknesses of 12/15/20 microns in standard width of 1530 m m.
Non standard thicknesses and widths area available on request Microporous –
polytetrafluoroethylene (PTFE) membrane ideal for high technical and military
garments. It is available in simple layer or coated
Nowofol Kunststoffprodukte GmbH & Co. KG
Address
Breslauer Str. 15
83313 Siegsdorf
Germany
Phone
+49 8662 6602-0
Fax
+49 8662 6602-50
Internet address
www.nowofol.de
E-Mail
info@nowofol.de
Stand
Hall 07.1, C44 (Page 886)
© 2014 Messe Düsseldorf GmbH
533
© 2014 Messe Düsseldorf GmbH
534
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.068
Technical films
02.05.070
Separating foils
NOWOLINER
NOWOMELT
NOWOMELT
Product Details
02.01.002
Nowofol Kunststoffprodukte GmbH & Co. KG
NOWOTAPE
02.03.003
Products made by extrusion
Plastics products and parts for building applications
NOWOBAND
NOWOCAST
NOWOCABLE
NOWOFLON ET 6235 Z Architektur
NOWOCARRY
NOWOMELT
NOWOCAST
NOWOTAPE
02.03.007
NOWODECOR
Plastics products and parts for electrical engineering
NOWOCABLE
NOWOFLON ET
NOWOCAST
NOWOFLON ET 6235 Z Architektur
NOWOFLON ET
NOWOFLON PVDF
NOWOLINER
NOWOGREEN
NOWOTAPE
NOWOLABEL
02.03.010
NOWOLINER
Plastics products and parts for aviation
NOWOFLON ET
NOWOMELT
02.03.012
NOWOMELT
NOWOCAST
NOWOPAQUE
NOWOLINER
NOWOSHRINK
02.03.014
NOWOSILK
NOWOSTRAIGHT
NOWOBAND
NOWOSTRONG
NOWOCARRY
NOWOTAPE
NOWOGREEN
NOWOTEAR
NOWOLABEL
02.03.002
Plastics products and parts for medical engineering
NOWOPAQUE
Plastics products and parts for automotive
NOWOSHRINK
NOWOCABLE
© 2014 Messe Düsseldorf GmbH
Plastics products and parts for food processing industry
535
© 2014 Messe Düsseldorf GmbH
536
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
NOWOSILK
NOWOLABEL
NOWOSTRAIGHT
NOWOMELT
NOWOTEAR
NOWOPAQUE
02.03.015
Plastics products and parts for transport/packaging
NOWOSHRINK
NOWOBAND
NOWOSILK
NOWOCARRY
NOWOSTRAIGHT
NOWODECOR
NOWOSTRONG
NOWOFLON ET
NOWOTAPE
NOWOGREEN
NOWOTEAR
NOWOLABEL
02.04.002
NOWOLINER
NOWOBAND
NOWOPAQUE
NOWOBAX
NOWOSHRINK
NOWOCABLE
NOWOSILK
NOWOCARRY
NOWOSTRAIGHT
NOWOCAST
NOWOSTRONG
NOWODECOR
NOWOTAPE
NOWOFLON ET
NOWOTEAR
02.04.001.03
NOWOFLON PVDF
Semi finished products of polyamide (PA)
NOWOGREEN
NOWOBAX
02.04.001.05
NOWOLABEL
Semi finished products of polyethylene (PE)
NOWOLINER
NOWOCAST
NOWOMELT
NOWOCAST
02.04.001.07
Films
NOWOPAQUE
Semi finished products of polypropylene (PP)
NOWOSHRINK
NOWOBAND
NOWOSILK
NOWOCABLE
NOWOCARRY
NOWOSTRAIGHT
NOWODECOR
NOWOSTRONG
© 2014 Messe Düsseldorf GmbH
537
© 2014 Messe Düsseldorf GmbH
538
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
NOWOTAPE
Oechsler AG
NOWOTEAR
02.05.015
Address
Matthias-Oechsler-Str. 9
91522 Ansbach
Germany
Phone
+49 981 1807-0
Fax
+49 981 1807-222
Internet address
www.oechsler.com
E-Mail
info@oechsler.com
Welding foil
Stand
Hall 07.1, E20 (Page 886)
Technical films
Product Overview
Electrical installation material
NOWOCABLE
NOWOFLON ET
NOWOFLON PVDF
02.05.031
Hot melt films
NOWOMELT
02.05.042
Membrane films
NOWOFLON ET
NOWOFLON ET
02.05.062
NOWOFLON ET
02.05.068
NOWOCABLE
Oechsler AG
02.01.010
Parts made by injection moulding
02.01.011
Parts made by termoforming
02.03.002
Plastics products and parts for automotive
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.008
Plastics products and parts for data appliance
02.03.012
Plastics products and parts for medical engineering
02.04.003.03
Parts from high performance thermoplastics
NOWOFLON ET
NOWOFLON ET
NOWOLINER
NOWOMELT
NOWOSTRONG
02.05.070
Separating foils
NOWOFLON ET
NOWOLINER
© 2014 Messe Düsseldorf GmbH
539
© 2014 Messe Düsseldorf GmbH
540
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.045
Micro parts
02.05.047
Surface treated and decorated parts
02.05.069
Parts of industrial laminates
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.075.02
Other fibre-reinforced plastic parts
Housing components for SCR-systems
Housing components for SCR-systems
Product Details
02.03.002
02.03.006
Oechsler AG
Plastics products and parts for automotive
Plastics products and parts for electro-/household appliance
Control panel for refrigerators
For temperature control of cooling / freezing unit. Manufacture with IMD (In-Mold-Decoration) technology to get
a multitude of design variants, complex 3-dimensional
geometry with integrated mechanical functionality.
Actuator for electronic parking brake
Replaces the usual wire rope of the hand brake.
Further product examples:
Oechsler moulds the plastic parts (cover, housing etc.)
and takes over the assembly of the complete device.
Parts to be mounted: two-stage planetary gearing,
scrap web with blank, DC motor, tooth belt, flexible cable.
- Housing for diabetic devices
Further product examples:
etc.
Casing for remote key (4 component technique) Adjusting unit of curve following light Mirror adjusting unit for trucks Hatchback actuator Design parts for car
interior (ceramic injection molding) etc.
Door closing aid for dish washers
Casings for remote control key
Mechatronical module with opening and closing function, complete product development in house. Manufacturing and assembly of all plastic parts, end of line
(EOL) testing included.
- Charging station for hearing aids (lacquering)
- Displays for mobile communication
Manufacturing with 4-component injection moulding
technology, hard-soft-combination of casing and keys,
abrasion-resistant moulded deys
Further product examples:
Control panel for refrigerators (IMD technique) Piping
system for steam cleaners Fixing element and cap for
exhaust hoods (Inmold Assembly) etc.
Further product examples:
Housings for diabetic devices Housings for sensors
Housings for air flow meter etc.
© 2014 Messe Düsseldorf GmbH
541
© 2014 Messe Düsseldorf GmbH
542
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
02.05.075.01
Fibreglass-reinforced plastic parts
Battery cover for Smartphone
Housing subassembly for diabetic devices
Battery cover for Smartphone
Manufacturing of all plastic parts, complex assembly,
decoration of the displays using In-Mould-Decoration
(IMD technique).
this back cover consists of thermoplastic material,reinforced with glass fiber and being deformed during the first process step afterwards, the edges and geometries are molded by using glass fibre filled PA finally,
the component is painted for scratch resistance
Further product examples:
Inhaler for asthmatics EasyLab test cassette (sensor
module) for testing of routine-/emergency blood parameters Components for blood test device Housing for
hearing aids charger etc.
OLIMAR LTD
Address
ul. Wodna 11
32-005 Niepolomice
Poland
Manufacturing by use of ceramic injection moulding
(CIM-technology), with high gloss surfaces, scratch resistance, excellent tactile properties and und high quality design
Phone
+48 12 2883020
Fax
+48 12 3121221
Further product examples:
Internet address
www.olimar.pl
Actuator for electronic parking brake Adjusting unit of
curve following light
E-Mail
biuro@olimar.pl
02.05.047
Stand
Hall 07.2, A21 (Page 888)
02.04.003.03
Parts from high performance thermoplastics
Climate control unit / ceramic control buttons
Surface treated and decorated parts
Control panel for refrigerators
Product Overview
For temperature control of cooling / freezing unit. Manufacture with IMD (In-Mold-Decoration) technology to get
a multitude of design variants, complex 3-dimensional
geometry with integrated mechanical functionality.
02.04.001.05
OLIMAR LTD
Semi finished products of polyethylene (PE)
Further product examples:
Charging station for hearing aids (lacquering) Housing
for diabetic devices Displays for mobile communication
etc.
© 2014 Messe Düsseldorf GmbH
543
© 2014 Messe Düsseldorf GmbH
544
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.04.001.05
OLIMAR LTD
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.002
Films
02.05.068
Technical films
Semi finished products of polyethylene (PE)
REGRANULATE LDPE
We produce LDPE regranulate from foil.
Product Details
Ongropack Ltd.
Address
02.03.015
Bolyai tér 1
3702 Kazincbarcika
Hungary
Phone
+36 48 510130
Fax
+36 48 310005
Internet address
www.ongropack.hu
E-Mail
ongropack@ongropack.hu
Stand
Hall 08b, E82 (Page 890)
Product Overview
Ongropack Ltd.
Plastics products and parts for transport/packaging
ONGROFOL-M metallized
Metallized films manufactured by Ongropack Ltd. are
in compliance with European directives and regulations
related to packaging materials intended to come into
direct contact with food.
The base film of ONGROFOL® METALLIZED film is a clear or amber colour
PVC base film, on which a 150-300 A thin layer of aluminium is applied to the
surface giving the silver or gold colour to the material.
During the manufacturing, the metallization process is performed by vacuum (10
-4 mbar), therefore the metallic layer can hardly be removed from the surface of
the film.
Ongropack Ltd.
From the point of view of product marketing, esthetic appearance is very important, therefore we offer our ONGROFOL® METALLIZED product for those
special applications, where the appearance and nice packaging of the product
is important.
02.01.002
Products made by extrusion
Metallized films are used mainly in the manufacturing of chocolate and sweets,
where it is used as forming inside the tray or box.
02.01.004
Products made by calendaring
ONGROFOL-R recycled
02.03.001
Plastics products and parts for plant building
02.03.003
Plastics products and parts for building applications
Ongropack Ltd. considers the protection of environment important, and accordingly we are committed to
recycle as much processing waste as possible by the
way of film production.
Accordingly, we developed our
© 2014 Messe Düsseldorf GmbH
545
© 2014 Messe Düsseldorf GmbH
546
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ONGROFOL® RECYCLED product which is a thermoformable technical film
containing a large part of recycled material.
This film is developed for non-food industrial application products, at the same
time due to its high-recycled content, it can be used very economically for any
vacuum or thermoforming purposes.
02.04.002
films to its Customers depending on application and processing, so we offer
in our product range homo- and copolymer, normal and high impact resistance
types, as well as some specialities like antistatic, anti block or high cold impact
resistant films.
We offer a wide range of clear, translucent and opaque colours for a variety of
food and technical packaging applications.
Our sales representatives are ready to give you advice on which of our range of
films will be most suitable for your requirements.
Films
ONGROFOL-P pharma
02.05.068
Pharmaceutical films manufactured by Ongropack Ltd.
are in compliance with latest European Pharmacopeia
directives and have FDA (Food and Drug Administration) registration. Phar type films fully comply with EU
regulations related to plastic materials and articles intended to come into direct
contact with food and drug.
Ongropack Ltd. is fully aware that the pharmaceutical industry demands safe,
high quality packing materials, therefore we offer our ONGROFOL® PHARMA
type film for the packaging of pharmaceutical products.
These films have excellent gas-tight property. Therefore they can be used in
wide range as both primary and secondary packaging material. We can offer
a wide range of products in clear, translucent and opaque colours for high demanding pharmaceutical applications.
Ongropack Ltd. considers the production, continuous development and sale of
pharmaceutical films of strategic importance. Consequently, we have launched
an investment programme aimed at the realisation of Clean Manufacturing System, further development of manufacturing conditions in compliance with the
high demands of the pharmaceutical industry.
Technical films
ONGROFOL-L laminated
Laminated films manufactured by Ongropack Ltd. are
in compliance with European directives and regulations
related to packaging materials intended to come into
contact with food.
ONGROFOL® LAMINATED film is manufactured by heat lamination process of
Ongrofol® THERMOFORM basic film and a special LDPE-copolymer film laminated on the surface of the base film.
The produced two layers system has excellent gas-tight properties, and is easy
to process for a wide variation of formings. We offer this special product mainly
for food industry companies operating FFS (Form, Fill & Seal) equipment.
ONGROFOL® LAMINATED film is available as a normal type and containing
EVOH layer type, as well as easy open (peelable) and non-peelable varieties.
We offer a wide range of clear, translucent and opaque colours in various impact
resistant grades.
ONGROFOL-T thermoform
Food grade films manufactured by Ongropack Ltd. are
in compliance with European directives and regulations
related to packaging materials intended to come into direct contact with food. We know that the excellent quality packing materials are an important factor for this industry, therefore we offer
a wide range of ONGROFOL® THERMOFORM type films for thermoforming or
vacuum forming applications.
Ongropack manufactures different types of ONGROFOL® THERMOFORM
© 2014 Messe Düsseldorf GmbH
547
© 2014 Messe Düsseldorf GmbH
548
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Optimum Rubber & Plastic Product Ltd.
Address
Phone
Fax
Internet address
E-Mail
Stand
ORBILAN GmbH Kunststoffwerk
Rm. B 8/F Century Centre, 33-35 Au Pui
NT, Hong Kong
China, Hongkong, Special Administrative Region
Address
Eichenkamp 34
48720 Rosendahl
Germany
Phone
+49 2547 9301-0
Fax
+49 2547 9301-15
Internet address
www.orbilan.de
E-Mail
info@orbilan.de
Stand
Hall 08a, H09 (Page 894)
+852 21486688
+852 21489498
www.optimum.com.hk
sales@optimum.com.hk
Hall 02, D23-3 (Page 866)
Product Overview
Optimum Rubber & Plastic Product Ltd.
Product Overview
02.04.001.12
Product Details
02.04.001.12
ORBILAN GmbH Kunststoffwerk
Semi finished products of rubber
Optimum Rubber & Plastic Product Ltd.
02.01.006
Parts made by mechanical treating
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
Semi finished products of rubber
Products
© 2014 Messe Düsseldorf GmbH
549
© 2014 Messe Düsseldorf GmbH
550
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.015
Plastics products and parts for transport/packaging
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.05.027
Rubber / plastics combinations
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.080
Toothed wheels and racks
Product Details
02.01.006
Ottensteiner Kunststoff GmbH & Co. KG
Address
Im Garbrock 39
48683 Ahaus
Germany
Phone
+49 2561 9824-0
Fax
+49 2561 9824-99
Internet address
www.okulen.com
E-Mail
hpopp@okulen.com
Stand
Hall 07a, B05 (Page 880)
Product Overview
Ottensteiner Kunststoff GmbH & Co. KG
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
ORBILAN GmbH Kunststoffwerk
Parts made by mechanical treating
Unsere Produkte
ORBILAN GmbH Kunststoffwerk stellt Kunststoffhalbzeuge und Platten nach
neustem Stand der Sinterpresstechnik her. Sämtliche Fertigungsprozesse werden Computer überwacht und garantieren eine gleichbleibend hohe Qualität
für spannungsarmes Material für die Einsatzbereiche in Industrie, Wirtschaft,
Auskleidung, Sportstättebau, Lebensmittelindustrie und Medizintechnik.
© 2014 Messe Düsseldorf GmbH
551
© 2014 Messe Düsseldorf GmbH
552
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.003.01
Parts from standard plastics
02.05.003
Linings and coatings
02.05.027
Rubber / plastics combinations
02.05.050
Parts for pumps
Product Details
02.01.006
Mit momentan 16 Formpressen sind wir in der Lage, sehr schnell und flexibel
auf Kundenwünsche zu reagieren. Ebenfalls steht uns unsere spanende Weiterverarbeitung zur Verfügung, für eine sekundäre oder alternative Bearbeitung
der Formteile.Durch die enge Zusammenarbeit mit unseren Kunden gelingt es
uns, sehr hochwertige, verschleißfeste und langlebige Formteile zu entwickeln,
deren Produkteigenschaften mit Einsatz von alternativen Werkstoffen nicht zu
erreichen sind.
Verarbeitet wird zum Beispiel OKULEN® PVDF. Das ist ein unverstärktes,
halbkristallines Fluorpolymer, das neben guten mechanischen Eigenschaften
auch ausgezeichnete Chemikalienbeständigkeit besitzt. Seine Eigenschaften
machen OKULEN® PVDF zu einem vielseitigen Konstruktionswerkstoff. Ebenfalls wird OKULEN® PTFE, OKULEN® PP und OKULEN® PE verarbeitet.
Ottensteiner Kunststoff GmbH & Co. KG
Basis für die Weiterverarbeitung zu Fertigteilen sind
die detaillierten technischen Vorgaben des Kunden.
Kundenaufträge nach Zeichnung werden auf hausinternen Programmierplätzen unter Berücksichtigung optimaler Arbeitsabläufe geschrieben. Direktkommunikation zwischen der Programmierabteilung und den Arbeitsplätzen sorgt für einen optimalen Fertigungsablauf. Alle erforderlichen Sonderwerkzeuge werden in Eigenfertigung hergestellt.
Parts made by compression moulding
Formteile
Seit 1993 werden formgepresste Fertigteile hergestellt.
Die Fertigungsweise ermöglicht es, zwei Produkt-Komponenten
(z. B. Stahlkern und Kunststoffgehäuse) ’aus einem
Guss’ herzustellen. Dabei wird der Metallkern in das
Kunststoffgehäuse mit eingepresst. Diese Produkte
finden vor allem in der petrochemischen, chemischen,
metallurgischen, pharmazeutischen, Nahrungsmittelindustrie (lebensmittelrechtlich zugelassen) sowie in der Pumpenindustrie Anwendung.
© 2014 Messe Düsseldorf GmbH
Semi finished products of polyethylene (PE)
Halbzeuge
Parts made by mechanical treating
Fertigteile
02.01.007
02.04.001.05
553
Nach den im Labor erstellten Rezepturen werden die
freigegebenen Rohstoffe - hauptsächlich UHMW PE
und HMW PE - zu den verschiedenen für die Halbzeuge
erforderlichen Qualitäten aufbereitet. Auf mehr als 16
Anlagen werden im Press-Sinterverfahren Platten und
Ronden hergestellt.
In Abmessungen bis zu 6 x 2 m / 8 x 1 m, bzw. 1,20 m
drm. sowie in Stärken von 6 mm bis zu 400 mm!
Temperatur, Druck und Zeit werden über Computersteuerungen automatisch
geregelt. Dies ermöglicht eine rationelle Fertigung und garantiert gleichbleibende
Qualitäten.
Bandmaterial wird von Ronden-Halbzeugen geschält, in Stärken von 0,5 mm
bis 10 mm und in Breiten von 8 mm bis 360 mm. Es kann als Rollenware oder
abgelängt und fassoniert geliefert werden. Bandmaterial wird u. a. in der Verpackungsindustrie und Fördertechnik eingesetzt.
© 2014 Messe Düsseldorf GmbH
554
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.07
atung, Materialentwicklung, Planung und Montage.
Semi finished products of polypropylene (PP)
PE-UHMW Polymer mit einem niedrigen Reibungskoeffizienten. Es sind ausgezeichnete Auskleidungswerkstoffe, die unter anderem zur Lösung von Materialflussstörungen perfektioniert wurden.
Skibeläge
Für Ski- und Snowboardbeläge ist eine spezielle zusätzliche
Behandlung notwendig: Der Belag wird geschliffen und beflammt, um eine bessere Verklebung mit dem späteren Ski/Snowboard
zu gewährleisten. Gleichzeitig wird für jeden einzelnen Belag ein Prüfprotokoll erstellt. OKULEN®-Ski- und Snowboardbeläge haben sich bereits weltweit einen Namen gemacht.
P.A.T.I. S.p.A.
Als Laufsohlen für Ski und Snowboards hat sich ultrahochmolekulares Niederdruck-Polyethylen hervorragend bewährt. OKULEN®-Skibeläge
und Snowboardbeläge werden geschliffen und flammbehandelt, um eine bessere
Verklebung zu erreichen. Sie sind in allen möglichen Farben und Variationen,
zum Beispiel in transparent (weiß), konduktiv (schwarz), durchgefärbt, mehrfarbig, durchscheinend, leuchtfarben oder doppeltgesintert erhältlich. OKULEN®Beläge werden nicht nur als Rollenware, sondern auch abgelängt und fassoniert
geliefert.
02.05.003
Linings and coatings
Address
Via Beltramini, 50/52
31020 San Zenone degli Ezzelini / TV
Italy
Phone
+39 0423 567326
Fax
+39 0423 567772
Internet address
www.pati-films.com
E-Mail
info@pati.it
Stand
Hall 07.1, A22 (Page 886)
Auskleidung
Mit OKULEN® OKUSLIDE wurde eine spezielle Verschleißauskleidungen für On Road- und Off Road-Kippfahrzeuge
entwickelt. Durch den Einsatz von höchstmolekularem
UHMW-PE mit hervorragenden Kerbschlag- und Verschleißeigenschaften werden Muldenkipper optimal vor einer vorzeitigen Abnutzung geschützt.Der relative Volumenverschleiß nach der Aufschlämmmethode (Sand Slurry) ist selbst bei hochverschleißfesten Stählen mehr als doppelt
so hoch wie bei OKUSLIDE-Werkstoffen. Das Material ist gegen eine Vielzahl
von Säuren und Laugen beständig. OKUSLIDE hat hervorragende dynamische
und statische Reibwerte. Schüttgüter jeder Art gleiten besser von der Ladefläche. Der Kippwinkel der Mulde kann geringer gewählt werden, was zu einer
höheren Sicherheit beim Entladen führt. Die Feuchtigkeitsaufnahme von OKUSLIDE ist praktisch gleich Null. Ein Eindringen und Festsetzen von Medien ist daher ausgeschlossen. Durch speziell eingebettete Additive im Material wird die
allgemeine Trennwirkung noch verbessert.
Product Overview
P.A.T.I. S.p.A.
02.01.002
Products made by extrusion
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
Auch bei tiefsten Temperaturen bis -40°C ist durch die guten mechanischen
Eigenschaften keine Qualitätsminderung zu erwarten. OKUSLIDE Verschleißauskleidungen erhalten Sie je nach Wunsch als komplettes System mit Kundenber-
© 2014 Messe Düsseldorf GmbH
555
© 2014 Messe Düsseldorf GmbH
556
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.007
Plastics products and parts for electrical engineering
propylene and vinylidene fluoride) provides a combination of performance advantages unmatched by any other melt processable fluorothermoplastic.
02.03.009
Plastics products and parts for agriculture
OUR THIN TUBES AND FILMS
02.03.010
Plastics products and parts for aviation
Provide a combination of performance advantages, such as low processing temperature, ability to bond to elastomers and hydrocarbon-based plastics, flexibility
and optical clarity.
02.03.012
Plastics products and parts for medical engineering
Main advantages:
02.03.014
Plastics products and parts for food processing
industry
Excellent optical clarity and light transmission; Bondability with many elastomers
and plastics; Outstanding flexibility in comparison with other fluroplastics; Excellent permeation resistance; Good resistance to chemicals; Low temperature
processability.
02.04.002
Films
Main areas of application:
02.05.062
Welding foil
Automotive, chemical processing, multi-layer tubes and hoses, semiconductors,
solar energy, optical fiber and architectural and protective coatings.
02.05.068
Technical films
02.03.002
02.05.070
Separating foils
Plastics products and parts for automotive
GRAPHIC ETFE
GRAPHIC ETFE
Product Details
02.01.002
P.A.T.I. S.p.A.
Products made by extrusion
FEP strips for coated PTFE membranes
P.A.T.I. has been producing FEP thermoplastic strips for architectural textile applications since several years.
We are proud to announce we will present ”GRAPHIC
ETFE” in preview at K 2010.
photographic multicolor print quality no modifications on
film’s surface properties graphic is not scratchable or
removable by water or solvents graphic does not affect welding process width
up to 1800mm
These strips are used to join PTFE coated membranes, allowing wider surface
coverings and complex shapes.
02.03.003
Tape’s available dimensions:
ETFE foils production for applications in Architecture and B
a) thickness: 50, 75 or 100 micron
ETFE foils production for applications in Architecture and Building Industry
b) width: 25, 50, 75, 100 mm
The main advantages of this exceptional material: lightweight, flame retardant,
transparency, self-cleaning, long lasting service life with many other features
(mainly derived from the architectural design).
02.03.001
Plastics products and parts for plant building
THV
Tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride
Dyneon THV Fluorothermoplastic (a polymer of tetrafluoroethylene, hexafluoro-
Plastics products and parts for building applications
Ethylene-tetrafluoroethylene, better known by its acronym ETFE, offers designers a remarkable opportunity to develop solutions that integrate modern lightness, durability, design and ecological values.
The main advantages of using ETFE films
© 2014 Messe Düsseldorf GmbH
557
© 2014 Messe Düsseldorf GmbH
558
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
It ’s a chemically inert material: it means that is insensitive to chemical agents
combining surface tension and resistance to environmental pollution. The advantage of self-cleaning properties is therefore clear: the exposed surfaces to
weathering do not require cleaning, sufficing just the rain.
The excellent light transmission properties (> 92%) and the very low weight compared to glass (about 1%), allow to create light and elegant structures. In addition, when using pressurised pillows, it’s possible to achieve control of both
sunlight transmission and effective insulation through the air inflated.
ETFE coverings offer also excellent acoustic properties , as the material does
not cause annoying echoes indoor.
The material is approved fire resistant Class 1 in Italy and B1 in Germany according to DIN 4102: extremely natural safe without any additives. Even when
burning, the material shrinks, not spreading flames by falling fragments.
UV radiation does not degrade the material: this, combined with cited chemical
inertness, guarantees extreme durability without loosing performance in conditions ranging from equatorial areas to higher latitudes, virtually from -190°C to
+150°C!
It ’s an environmental friendly material, because at the end of the service life it
can be completely regenerated for new uses, even of the same type, at a cost
definitely competitive than glass, avoiding to send it to landfill.
ticity, i.e. easy adaptation to rough surfaces, resistance to puncturing and high
surface yield, due to the density limited to 520 g/m2.
Food grade formulations are available, which are suitable for drinking water
reservoirs and fish farming, and other types have been studied to match textile supports.
The chemical compatibility with potentially harmful dissolved substances can be
checked with the assistance of our technical services. Upon request, the sheet
can be preassembled in our factory.
Ordering suggestions
It is possible to order customized sheets that are assembled and welded by high
frequency machines at P.A.T.I.’s works.
In this case it is necessary to supply a quoted drawing, considering that the
maximum size of one single sheet is to 2000 m2, i.e. 40x50 m or 130x165 ft.
N.B. one side must be a multiple of 4 m.
Field installation assistance
In case of basins which require a larger size than the maximum preassembled
in the factory, an assistance service is available, performed by specialized technicians, who can supervise the correct unfolding and spreading of the sheets.
IDROEVA sheets are then joint together by thermal welding.
P.A.T.I. S.p.A. is able to collaborate with engineering firms, general contractors
and developers providing ETFE films and membranes maximum 2000mm wide
in standard thickness: 100, 150, 200, 250 microns.
ETFE
02.03.009
Ethylene tetrafluoroethylene copolymer
Plastics products and parts for agriculture
Products for agriculture
PATI’s almost fifty years of knowledge and expertise enable the company to
propose sound solutions for agriculture.
The Company is partner of associations and single entrepreneur activities, through
applications such as
greenhouse/tunnel covering, pond liners for water reservoirs, silage protection,
mulching.
02.03.014
Plastics products and parts for food processing industry
IDROEVA
IDROEVA offers a range of sheets manufactured with EVA/C, ethylene and vinyl
acetate copolymers, including a high VA percentage which allows excellent elas-
© 2014 Messe Düsseldorf GmbH
559
02.04.002
Films
Ethylene tetrafluoroethylene, known also by its acronym ETFE, is a thermplastic fluorocarbon-based polymer (a fluoropolymer). It was originally designed to
have high corrosion resistance and strength over a wide temperature range.
Compared to glass, ETFE film is 1% the weight, transmits more light and is also
resilient, self-cleaning (due to its nonstick surface) and recyclable.
An example of its use is as pneumatic panels covering the outside of large sport
complexes, such as football stadium Allianz Arena or the Beijing National Aquatics Centre - the world’s largest structure made of ETFE film, well known also as
the ”Water Cube”.
The most known brand names of ETFE include Tefzel® by DuPont, Fluon® by
Asahi Glass Company and Neoflon® ETFE by Daikin.
OUR THIN TUBES AND FILMS
© 2014 Messe Düsseldorf GmbH
560
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Feature an exceptional resistance to chemicals and can be used continuously
up to approximately 155 °C service temperature.
OSMOTEX / OSMOLUX
Main advantages :
BREATHABLE AND WATERPROOF : our films offer a structure that allows excellent permeability to air and water vapor while remaining waterproof and, unlike
microporous products, is a barrier layer for larger molecules and bacteria.
Wide service temperature range Low flammability Excellent mechanical and dielectric properties Very good resistance to chemicals and solvents Extremely
high resistance to outdoor weathering High light transmission in the visible and
UV ranges Non-stick characteristics Excellent tearing resistance Low permeability..
Main areas of application :
Aerospace, automotive, chemical processing, composites, greenhouse coverings,architectural membranes.
FEP
Fluorinated ethylene propylene copolymer
FEP, or Teflon-FEP®, is a copolymer of hexafluoropropylene and tetrafluoroethylene. It differs from the PTFE (polytetrafluoroethylene) resins in that it is meltprocessible using conventional injection molding and screw extrusion techniques.
Fluorinated ethylene propylene was invented by DuPont and is sold under the
brandname Teflon-FEP®. Similar products are available from Dyneon and Daikin
with the brand name of Neoflon-FEP®.
FEP shares PTFE’s useful properties of low friction and non-reactivity, but is
more easily formable. FEP is softer than PTFE and melts at 260 °C; it is highly
transparent and resistant to UV radiation.
Polyether Block Amide films
Extremely easy to laminate onto textiles and non woven fabrics, OSMOTEX is
the right choice for advanced or technical clothing, or for medical applications
(i.e. for surgical gloves or for anti decubitus mattresses or pillows) as well. Its
breathability can be fully appreciated also for plasters (or essence dispensers) or
even in the building industry as housewrap and, due to its mechanical properties,
in shrinking films for packaging when condensation has to be avoided.
OSMOLUX can be the optimum choice for fresh food containers, as breathable
barrier. It is food grade and also suitable for advanced plastic bags. OSMOLUX
plastic bags are also wide used in agriculture or industrial sectors for, as example, muds drying.
OUR THIN TUBES AND FILMS
Main advantages:
High moisture vapor transmission rate; Water resistance; Barrier for bacteria;
Tear resistance and high tensile strength; Suitable for sterilization (ethylene oxide process, steam, gamma radiation); Approved for skin and food contact; UV
resistant; Antistatic.
Main areas of application:
Medical equipments, advanced clothing, food processing, containers for fresh
food,agriculture, housewraps, drying processes...
OUR THIN TUBES AND FILMS
Hi-tech films and tubes. The special fluoropolymer gives to the product an outstanding resistance to chemical agents, a working temperature range which exceeds 200 °C and excellent dielectric properties, mechanical strength and durability.
Main advantages:
Service temperature up to 205 °C; Excellent resistance to solvents and chemicals; Outstanding dielectric properties; Not flammable; Extremely smooth nonsticking surface.
Main areas of application:
Telecommunications, wire & cable, semiconductors, paper industry, chemicals,
textiles, food processing, packaging, composites, protective coating.
02.05.062
Welding foil
ETFE
ETFE foils production for applications in Architecture and Building Industry
The main advantages of this exceptional material: lightweight, flame retardant,
transparency, self-cleaning, long lasting service life with many other features
(mainly derived from the architectural design).
Ethylene-tetrafluoroethylene, better known by its acronym ETFE, offers designers a remarkable opportunity to develop solutions that integrate modern lightness, durability, design and ecological values.
The main advantages of using ETFE films
It ’s a chemically inert material: it means that is insensitive to chemical agents
combining surface tension and resistance to environmental pollution. The ad-
© 2014 Messe Düsseldorf GmbH
561
© 2014 Messe Düsseldorf GmbH
562
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
vantage of self-cleaning properties is therefore clear: the exposed surfaces to
weathering do not require cleaning, sufficing just the rain.
PVDF
The excellent light transmission properties (> 92%) and the very low weight compared to glass (about 1%), allow to create light and elegant structures. In addition, when using pressurised pillows, it’s possible to achieve control of both
sunlight transmission and effective insulation through the air inflated.
Polyvinylidene Fluoride, or PVDF is a highly non-reactive thermoplastic fluoropolymer. It is also known as KYNAR® (Arkema) or HYLAR® (Solvay Solexis).
ETFE coverings offer also excellent acoustic properties , as the material does
not cause annoying echoes indoor.
The material is approved fire resistant Class 1 in Italy and B1 in Germany according to DIN 4102: extremely natural safe without any additives. Even when
burning, the material shrinks, not spreading flames by falling fragments.
UV radiation does not degrade the material: this, combined with cited chemical
inertness, guarantees extreme durability without loosing performance in conditions ranging from equatorial areas to higher latitudes, virtually from -190°C to
+150°C!
It ’s an environmental friendly material, because at the end of the service life it
can be completely regenerated for new uses, even of the same type, at a cost
definitely competitive than glass, avoiding to send it to landfill.
P.A.T.I. S.p.A. is able to collaborate with engineering firms, general contractors
and developers providing ETFE films and membranes maximum 2000mm wide
in standard thickness: 100, 150, 200, 250 microns.
02.05.068
Polyvinylidene fluoride
PVDF is a specialty plastic material in the fluoropolymer family; it is used generally in applications requiring the highest purity, strength, and resistance to
solvents, acids, bases and heat and low smoke generation during a fire event.
Compared to other fluoropolymers, it has an easier melt process because of its
relatively low melting point.
OUR THIN TUBES AND FILMS
The excellent characteristics of mechanical strength and abrasion resistance,
and good chemical resistance allow a wide range of application, with continuous
operating temperatures up to 150 °C.
Main advantages:
Excellent mechanical strength; Good resistance to chemicals; continuous operating temperatures up to 150 °C; Smooth and self cleaning surface; Resistance
to UV and nuclear radiation; Excellent flame retardant; Good impermeability.
Main areas of application:
Chemical, food and pharmaceutical processing, tubes and hoses, wire and cable, semiconductors, automotive, nuclear, protective coatings.
Technical films
FEP & ETFE release films
FEP and ETFE release film production
Unrivaled non-stick surface, exceptional adaptation even to complex surfaces,
wide range of service temperature, easy and clean removing from products and
molds.
We produce ETFE and FEP release films (or separating foils). Browse our standard production and ask for custom dimensions! Mainly used for compression
and resin transfer molding composites.
ETFE release films
Color: translucent blue Width: up to 190 cm (74”) Thickness: from 20 micron
(0,0008”)
FEP release films
Color: translucent red Width: up to 190 cm (74”) Thickness: from 13 micron
(0,0005”)
© 2014 Messe Düsseldorf GmbH
563
© 2014 Messe Düsseldorf GmbH
564
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
tungen minimiert.
P.O.S. Plasma Oberflächen Service GmbH
Hartstoffbeschichtungen sind extrem dünne und sehr harte Schichten und ein
unverzichtbarer Bestandteil der modernen Oberflächenoptimierung von P.O.S.
Sie kommen den ökologischen Forderungen bezüglich Umweltverträglichkeit
nach, weil Hartstoffbeschichtungen einen eingeschränkten bis völligen Verzicht
auf Kühl-, Schmier- und Trennmittel ermöglichen.
Address
Berghausen 1
42859 Remscheid
Germany
Phone
+49 2191 33030
Fax
+49 2191 39060
Die Hartstoffe werden im PVD- und CVD-Verfahren aufgebracht. Die Schichtstärken liegen hierbei abhängig vom angewendeten Verfahren im Bereich von
2µm bis 10µm und erreichen eine Härte von bis zu 3500 HV.
Internet address
www.pos-beschichtungen.de
Hartstoffbeschichtungen mit höheren Schichtstärken werden durch Flammspritzen oder Diffusionsverfahren ermöglicht.
E-Mail
info@pos-beschichtungen.de
Stand
Hall 02, F06 (Page 866)
Product Overview
P.O.S. Plasma Oberflächen Service GmbH
01.14.011
Anticorrosive effect
02.05.007
Coatings
Product Details
02.05.007
Weitere Beschichtungshartstoffe, die zunehmend an Bedeutung gewinnen,
sind die diamantähnlichen Kohlenstoffbeschichtungen (DLC). Sie werden überwiegend mit dem PACVD Verfahren aufgebracht und zeichnen sich durch sehr
gute Gleiteigenschaften, chemische Beständigkeit und hervorragenden Korrosionsschutz aus.
P.O.S. Plasma Oberflächen Service GmbH
Coatings
Die Bedeutung von Hartstoffbeschichtungen für den Werkzeug- und Formenbau zeigt sich durch eine eigene VDI-Richtlinie, die VDI 3198 ”Beschichten von
Werkzeugen der Kaltmassivumformung - CVD- und PVD-Beschichten”.
Die vielfältigen Möglichkeiten der Hartstoffbeschichtungen kommen in der Praxis
jedoch noch relativ selten zur Anwendung. Gründe hierfür sind die Unsicherheit bezüglich der anfallenden Kosten sowie die Unwissenheit über die optimale
Beschichtung für den aktuellen Anwendungsfall. Dabei sind Hartstoffbeschichtungen heutzutage als kostengünstige Lösung für viele Anwendungsfälle optimal
geeignet. Fragen zu dieser Beschichtung beantworten Ihnen die Anwendungstechniker von P.O.S.
Hartstoffbeschichtungen
Weitere Informationen zur Entformung erhalten Sie auf unseren Infoseiten hartstoffbeschichtungen.
Hartstoffbeschichtungen gegen Verschleiß
Werkzeugbeschichtungen
Neben einer Optimierung der Wirtschaftlichkeit ist der
Verschleißschutz für Unternehmen, die Werkzeuge oder
Bauteile in der Fertigung einsetzen, von immenser Bedeutung. Denn ein Verschleiß an den Werkzeugen
kann zum völligen Produktionsstillstand führen. Stillstände senken die Produktivität, beim gleichzeitigen
Anstieg der Kosten. Die Wettbewerbsfähigkeit des Unternehmens kann dadurch
beeinträchtigt werden.
Dieser Verschleiß wird in der Praxis durch den Einsatz von Hartstoffbeschich-
© 2014 Messe Düsseldorf GmbH
565
Minimierte Wartungs- und Stillstandszeiten
Werkzeugbeschichtungen sind heute aus dem modernen Werkzeug- und Formenbau nicht mehr wegzudenken. Sie veredeln Oberflächen, schützen vor Verschleiß und verbessern die Wirtschaftlichkeit der Werkzeuge.
Gründe genug, um sich schon bei der Konstruktion
der Werkzeuge Gedanken über die richtige Werkzeugbeschichtung zu machen. Denn um ein gutes Werkzeug zu fertigen, ist eine enge
© 2014 Messe Düsseldorf GmbH
566
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Zusammenarbeit der Konstrukteure, der Werkzeugbauer und der Beschichter
notwendig.
Bei den Werkzeugbeschichtungen wird zwischen Randschichtbehandlungen
und Auflageschichten unterschieden. Bei den Randschichtbehandlungen findet
in der randnahen Oberfläche des Werkzeuges eine Eigenschaftsänderung statt.
Die Auflageschichten sind von der Werkzeugoberfläche deutlich abgegrenzt
und können völlig andere Materialeigenschaften aufweisen. Die wichtigsten
Werkzeugbeschichtungen sind die Beschichtungen nach dem CVD- und PVDVerfahren, die galvanischen Schichten und die thermischen Spritzschichten.
Die PVD-Beschichtung zeichnet sich durch hohe Härte und Oxidationsbeständigkeit
aus. Gleichzeitig verringern sich bei so beschichteten Oberflächen die Trockenreibwerte, die Neigung zu Verschweißungen sowie die Adhäsions- und Korrosionsneigung. Beim CVD-Verfahren sind Schichtstärken bis 10 µm und
Schichthärten bis 3.500 HV möglich. Dies macht CVD-Beschichtungen widerstandsfähig und robust.
Palram Industries Ltd.
Address
30035 Ramat Yochanan
Israel
Phone
+972 4 8459900
Fax
+972 4 8444012
Internet address
www.palram.com
E-Mail
palram@palram.com
Stand
Hall 08a, D48 (Page 894)
Product Overview
Palram Industries Ltd.
02.02.003
Printing
02.03.001
Plastics products and parts for plant building
02.03.003
Plastics products and parts for building applications
02.03.009
Plastics products and parts for agriculture
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.05.056
Foam products
Product Details
02.02.003
Palram Industries Ltd.
Printing
PALIGHT® PALCLEAR® PALSUN® PALGLAS®
PALIGHT is a lightweight, versatile, flexible, and durable foamed PVC sheet that
is ideal for use in advertising and construction.
PALCLEAR transparent sheets provide solutions to various applications in populated indoor areas.
PALSUN Flat Solid Polycarbonate Sheet. PALSUN Diffuser and LB sheets are
extensively used in durable light boxes.
PALGLAS Flat Extruded Acrylic Sheet.
02.03.001
Plastics products and parts for plant building
SUNTUF® PALRUF® PALOPAQUE™
SUNTUF corrugated polycarbonate sheet is an outstanding roofing material that
offers superior physical properties.
© 2014 Messe Düsseldorf GmbH
567
© 2014 Messe Düsseldorf GmbH
568
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
PALRUF corrugated PVC sheet is an all-round durable roofing solution, combining excellent resistance to chemicals, fire and impact.
PALOPAQUE System is a rigid PVC based wall cladding solutions. It offers a
practical, cost efficient and comprehensive package that helps maintain high
sanitation levels
SUNPAL is an advanced multiwall polycarbonate panel system that combines
proven design, light transmission, thermal insulation and strength.
SUNTUF Corrugated Polycarbonate Rooflights are used as in-plane rooflights
and sidelights with corrugated metal roofs and offer multiple advantages over
alternatives.
02.04.001.04
Semi finished products of polycarbonate (PC)
PALSUN® SUNLITE® PALGARD™ PALSHIELD™ SUNTUF® SUNOPAK™
PALSUN combines ultra-high impact resistance with clarity, making it the material of choice for demanding applications.
SUNGLAZE is an architectural system that offers smart design, elegant appearance, versatility, low maintenance and sustainable performance to various architectural challenges.
SUNLITE has a cellular polycarbonate structure that yields a lightweight sheet
with high impact strength and superior thermal insulation.
02.03.003
PALGARD resists vandalism, graffiti spray and physical attack due to a powerful
combination of physical properties.
Plastics products and parts for building applications
SUNTUF® PALRUF® PALOPAQUE™ SUNPAL® SUNGLAZE™
SUNTUF corrugated polycarbonate sheet is an outstanding roofing material that
offers superior physical properties.
PALRUF corrugated PVC sheet is an all-round durable roofing solution, combining excellent resistance to chemicals, fire and impact.
PALOPAQUE System is a rigid PVC based wall cladding solutions. It offers a
practical, cost efficient and comprehensive package that helps maintain high
sanitation levels
PALSHIELD offers clear, bullet resistant glazing for a variety of security glazing
needs.
SUNTUF Corrugated Polycarbonate Sheet, outstanding roofing material that offers superior physical properties.
SUNOPAK Corrugated Modified Polycarbonate Sheet, opaque corrugated polycarbonate sheet is ideal for lightweight roofing applications.
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
SUNPAL is an advanced multiwall polycarbonate panel system that combines
proven design, light transmission, thermal insulation and strength.
PALGLAS® SUNGLAS™
SUNGLAZE is an architectural system that offers smart design, elegant appearance, versatility, low maintenance and sustainable performance to various architectural challenges.
PALGLAS Flat Extruded Acrylic Sheet offers unsurpassed light transmission,
matching that of glass while weighing half. Inherently UV resistant, PALGLAS
is the ultimate choice in high traffic acoustic barriers, resisting gasses emitted
from vehicles.
02.03.009
Plastics products and parts for agriculture
SUNTUF® Plus SUNLITE® Plus PALRUF® AG-TUF® SUNTUF® Rooflight
SUNTUF® Plus and SUNLITE® Plus corrugated and multiwall polycarbonate
sheets set the standard for efficient greenhouse roofing with more than 25 million square meters currently installed. These sheets guarantee elimination of
condensation dripping and provide optimal PAR light transmission needed for
plant growth, which results in optimal nurturing conditions.
PALRUF corrugated PVC sheet is an all-round durable roofing solution, combining excellent resistance to chemicals, fire and impact.
AG-TUF Corrugated PVC Liner Panel has remarkable durability, ease of installation, and outstanding versatility.
SUNGLAS is an corrugated sheet intended for both professional and DIY roofing
jobs. Extruded from high impact acrylic, SUNGLAS offers durability and high
light transmission.
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
PALIGHT® PALCLEAR® PALOPAQUE™ PALDECK™ PALRUF® AG-TUF®
PALTO
PALIGHT is a lightweight, versatile, flexible, and durable foamed PVC sheet that
is ideal for use in advertising and construction.
PALCLEAR Flat Transparent PVC Sheet provide solutions to various applications in populated indoor areas.
PALOPAQUE is a flat UV-stabilized PVC sheet, with over 40 years of manufac-
© 2014 Messe Düsseldorf GmbH
569
© 2014 Messe Düsseldorf GmbH
570
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
turing experience that is reflected in its high quality. Easily formed and fabricated, PALOPAQUE is ideal for a wide variety of applications.
Company News
PALDECK PVC Decking Board is an innovative and durable decking board used
for outdoor leisure areas.
09/19/2013
PALRUF corrugated PVC sheet is an all-round durable roofing solution, combining excellent resistance to chemicals, fire and impact.
AG-TUF Corrugated PVC Liner Panel has remarkable durability, ease of installation, and outstanding versatility. It is often used for agricultural and light industrial
buildings.
PALTOP Corrugated Foamed PVC Sheet offers a cost-efficient solution for lightweight
exterior roofing applications.
02.05.056
Foam products
PALIGHT®
PALIGHT is a lightweight, versatile, flexible, and durable foamed PVC sheet that
is ideal for use in advertising and construction.
Parkinson Technologies Inc.
Address
100 Goldstein Drive
02895 Woonsocket, RI
USA
Phone
+1 401 762-2100
Fax
+1 401 762-2295
Internet address
www.parkinsontechnologies.com
E-Mail
abelair@parkinsontechnologies.com
Stand
Hall 03, D54 (Page 868)
© 2014 Messe Düsseldorf GmbH
Parkinson Technologies Inc.
PARKINSON TECHNOLOGIES TO FEATURE THE KEY
FILTERS KCH CONTINUOUS HYBRID SCREEN
CHANGER WITH INCREASED SAFETY AND
PERFORMANCE
Parkinson Technologies Inc. will be exhibiting at the upcoming K-Show 2013 in Dusseldorf, Germany (October 16-23,
Stand 3D54), promoting its lines of melt filtration, converting, winding, and plastics orientation processing machinery
for the plastics industry. As the world’s premier trade fair
for plastics and rubber, the K-Show is held once every three
years. It is the leading industry showcase for all major market innovations.
Parkinson Technologies is scheduled to exhibit their new
KCH Continuous Hybrid Screen Changer, in addition to other innovations across
their product lines. The KCH was unveiled at last year’s NPE show in Orlando,
FL with positive response to the high level of efficiency and performance over a
broad range of polymers. This year, Parkinson Technologies will showcase an
enhanced version of the KCH offering even more capability with a new safety
feature of an automatic screen shear system.
“Working closely with our customers, we implemented further advancements to
our already innovative design,” said John Whaley, Business Manager Key Filters
Products. “By making novel modifications to the shape of the flow passage
we were able to double the filtration area, resulting in a substantial capacity
increase. This provides a more even distribution of polymer flow and promotes
a much more efficient use of the filter media.”
“We also added an automatic screen shear system to offer customers an increased level of automation and safety,” said Whaley. “Once the operator programs the desired cut-off length, which can be as short as 2.5 inches (63.5mm),
then he or she can simply allow the machine to handle cutting the filter waste.
This eliminates manually cutting the screen with a saw while the machine is
running, increasing operator safety.”
Parkinson Technologies encourages prospective buyers to visit their stand at
the K-Show 2013 to see the Key Filter KCH Continuous Hybrid Screen Changer
and other product innovations.
571
© 2014 Messe Düsseldorf GmbH
572
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Product Overview
Parkinson Technologies Inc.
Parkinson Technologies Inc.
02.01.002
02.01.002
Products made by extrusion
02.04.002
Films
Products made by extrusion
Technology Labs
Marshall and Williams Plastics is recognized as a leader
in the field of plastic film and sheet downstream equipment and orientation machinery. Our laboratory is
available to customers for product and process evaluation on a fee basis.
02.05.042
Membrane films
02.05.068
Technical films
02.05.069
Parts of industrial laminates
03.01.006
Screen changers
The Extrusion and Casting section consists of a single or multiple extruders, with
general purpose screws, melt pipe system and choice of dies, and a casting unit
for film or sheet production. Customers have the option to pin the extrudate to
the casting roll by a variety of means.
03.01.007
Melt filters
Machine Direction Orienter (MDO)
03.02.001.02.01
Extrusion lines for blown film
03.02.001.02.02
Extrusion lines for flat film and sheets
03.02.001.02.06
Extrusion lines for laminating and coating
03.02.001.02.10
Other extrusion lines
Extrusion and Casting
The Marshall and Williams Plastics Lab MDO can be used to produce monoaxial oriented films, with or without Compression Roll Drawing (CRD), as well
as biaxially oriented film and sheet when used in conjunction with the TDO.The
system consists of six 30 inch face width rolls.The first five rolls are thermally
controlled by internal oil heating and the last roll has water-cooling. Maximum
oil temperature is 550 degrees F. Water temperature range is 50 - 275 degrees
F. There are five drives; preheat 1, pre-heat 2 & slow draw, fast draw, anneal 1,
and cooling.
Transverse Direction Orienter (TDO)
The Marshall and Williams Plastics Lab TDO consists of two horizontal chain
systems between which the material is drawn, or stretched, in accordance with
a predetermined divergence pattern. Horizontally mounted sprockets at the delivery end of the TDO drives the chain.
03.02.006.01
Calenders
03.02.006.03
Sheet casting machines
03.03.004
Cutting machines
02.04.002
03.03.005
Winding equipment
Technology Labs
03.03.006
Slitter rewinders
03.03.013
Stretching lines for film, filament etc.
Marshall and Williams Plastics is recognized as a leader
in the field of plastic film and sheet downstream equipment and orientation machinery. Our laboratory is
available to customers for product and process evaluation on a fee basis.
© 2014 Messe Düsseldorf GmbH
573
Films
© 2014 Messe Düsseldorf GmbH
574
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Extrusion and Casting
The Extrusion and Casting section consists of a single or multiple extruders, with
general purpose screws, melt pipe system and choice of dies, and a casting unit
for film or sheet production. Customers have the option to pin the extrudate to
the casting roll by a variety of means.
Machine Direction Orienter (MDO)
The Marshall and Williams Plastics Lab MDO can be used to produce monoaxial oriented films, with or without Compression Roll Drawing (CRD), as well
as biaxially oriented film and sheet when used in conjunction with the TDO.The
system consists of six 30 inch face width rolls.The first five rolls are thermally
controlled by internal oil heating and the last roll has water-cooling. Maximum
oil temperature is 550 degrees F. Water temperature range is 50 - 275 degrees
F. There are five drives; preheat 1, pre-heat 2 & slow draw, fast draw, anneal 1,
and cooling.
Transverse Direction Orienter (TDO)
The Marshall and Williams Plastics Lab TDO consists of two horizontal chain
systems between which the material is drawn, or stretched, in accordance with
a predetermined divergence pattern. Horizontally mounted sprockets at the delivery end of the TDO drives the chain.
02.05.042
Transverse Direction Orienter (TDO)
The Marshall and Williams Plastics Lab TDO consists of two horizontal chain
systems between which the material is drawn, or stretched, in accordance with
a predetermined divergence pattern. Horizontally mounted sprockets at the delivery end of the TDO drives the chain.
02.05.068
Technical films
Technology Labs
Marshall and Williams Plastics is recognized as a leader
in the field of plastic film and sheet downstream equipment and orientation machinery. Our laboratory is
available to customers for product and process evaluation on a fee basis.
Extrusion and Casting
The Extrusion and Casting section consists of a single or multiple extruders, with
general purpose screws, melt pipe system and choice of dies, and a casting unit
for film or sheet production. Customers have the option to pin the extrudate to
the casting roll by a variety of means.
Membrane films
Technology Labs
Marshall and Williams Plastics is recognized as a leader
in the field of plastic film and sheet downstream equipment and orientation machinery. Our laboratory is
available to customers for product and process evaluation on a fee basis.
Machine Direction Orienter (MDO)
Extrusion and Casting
The Extrusion and Casting section consists of a single or multiple extruders, with
general purpose screws, melt pipe system and choice of dies, and a casting unit
for film or sheet production. Customers have the option to pin the extrudate to
the casting roll by a variety of means.
Machine Direction Orienter (MDO)
The Marshall and Williams Plastics Lab MDO can be used to produce monoaxial oriented films, with or without Compression Roll Drawing (CRD), as well
as biaxially oriented film and sheet when used in conjunction with the TDO.The
© 2014 Messe Düsseldorf GmbH
system consists of six 30 inch face width rolls.The first five rolls are thermally
controlled by internal oil heating and the last roll has water-cooling. Maximum
oil temperature is 550 degrees F. Water temperature range is 50 - 275 degrees
F. There are five drives; preheat 1, pre-heat 2 & slow draw, fast draw, anneal 1,
and cooling.
575
The Marshall and Williams Plastics Lab MDO can be used to produce monoaxial oriented films, with or without Compression Roll Drawing (CRD), as well
as biaxially oriented film and sheet when used in conjunction with the TDO.The
system consists of six 30 inch face width rolls.The first five rolls are thermally
controlled by internal oil heating and the last roll has water-cooling. Maximum
oil temperature is 550 degrees F. Water temperature range is 50 - 275 degrees
F. There are five drives; preheat 1, pre-heat 2 & slow draw, fast draw, anneal 1,
and cooling.
Transverse Direction Orienter (TDO)
The Marshall and Williams Plastics Lab TDO consists of two horizontal chain
systems between which the material is drawn, or stretched, in accordance with
a predetermined divergence pattern. Horizontally mounted sprockets at the delivery end of the TDO drives the chain.
© 2014 Messe Düsseldorf GmbH
576
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.069
Parts of industrial laminates
Product Overview
Technology Labs
Marshall and Williams Plastics is recognized as a leader
in the field of plastic film and sheet downstream equipment and orientation machinery. Our laboratory is
available to customers for product and process evaluation on a fee basis.
Pe Tech Foam Co., Ltd.
01.04.008
Polyethylene foams (PE)
02.05.056
Foam products
03.02.001.02.02
Extrusion lines for flat film and sheets
03.02.005.01
Preexpanders, foaming machinery for parts and blocks
(for EPS, EPP, EPE)
Pe Tech Foam Co., Ltd.
Address
Product Details
#1704-1, Sucho-Dong, Sucho-Gu
137-731 Seoul
Korea, Republic
02.05.056
Pe Tech Foam Co., Ltd.
Foam products
QYCELL BUN
Phone
+82 2 34821142
Fax
+82 2 34821143
Internet address
www.crosslinkfoam.com
Brand Name : TB - (Number)
E-Mail
sales@crosslinkfoam.com
Stand
Hall 13, D79 (Page 908)
Product full size
110~115mm thickness
48” x 72” inch / width x length
Based raw material : LDPE + EVA + Other additives
Application :
Company News
09/10/2013
- Hyundai , KIA, GM Vehicle interior material
Pe Tech Foam Co., Ltd.
Eearned exclusive OEM from USA
- Kitchenware / Houseware / Sofa & Bagpack Cushion / Sound Proof of inside
building / Water Proof
- Beauty cosmetics : Nail file
- Insulation cover
PE TECH had an exclusive contract to produce OEM, QB BUN, product of
Qycell corp. on 2005
- Buoyancy goods for protection vessel
- Floating block Mat / YOGA Mat
For more many infomation,
Visit to www.qycell.com
© 2014 Messe Düsseldorf GmbH
577
© 2014 Messe Düsseldorf GmbH
578
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
visit www.plaskolite.com
Plaskolite, Inc.
Address
1770 Joyce Avenue
43219 Columbus, OH
USA
Phone
+1 614 294-3281
Fax
+1 614 297-7287
Internet address
www.plaskolite.com
E-Mail
info@mdna.com
Stand
Hall 05, C05-5 (Page 874)
Company News
04/15/2013
04/15/2013
Plaskolite Adds Cell Cast Acrylic to Product Line,
Forms Joint Venture with Işik Plastik
COLUMBUS, Ohio (Sept. 27, 2012) – Plaskolite, Inc., the largest U.S. manufacturer of continuously processed acrylic sheet products, announces the coming addition of cell cast acrylic to its product line to better support its worldwide
customer base. Plaskolite has formed a joint venture with Işik Plastik, a leading
Turkey-based manufacturer of thermoformed plastics, to build a state-of-the-art
cell cast acrylic manufacturing facility which is scheduled for completion during
the second half of 2013.
Plaskolite, Inc.
PLASKOLITE ACQUIRES PEXCO EXTRUDED SHEET
BUSINESS
COLUMBUS, Ohio (December 14, 2012) – Plaskolite, Inc., the nation’s largest
manufacturer of continuously processed acrylic sheet products, has acquired
the extruded sheet business of Pexco LLC.
Pexco, an Atlanta, GA.-based manufacturer of custom-extruded plastic products, is selling its Columbia, S.C. -based extruded sheet business to Columbus,
OH-based Plaskolite. Further terms of the deal were not disclosed.
“Our goal has always been quite simple – to be the leader in the industry while
strengthening our marketplace position for the benefit of our customers,” said
James R. Dunn, President and CEO of Plaskolite. “With this acquisition, we
have reinforced our commitment to this goal with our customers, while building
on our long-term investment in our American workforce and facilities.”
“Our soon-to-be-completed cell cast manufacturing facility will provide our customers with a level of product choice, service and quality that has been unavailable in the industry,” said James R. Dunn, President and CEO of Plaskolite. “I
am fascinated by the dynamism of Işik Plastik and our partnership with them will
certainly create good synergy. As we’ve said before, our customers’ best interests are at the forefront of every decision we make. This venture is yet another
example of our commitment to our customers located in North America, Latin
America, Europe and Asia.”
Cell cast acrylic, a product that has a high chemical resistance, gauge and
color range, is an entirely new product line for Plaskolite. It will be produced
in Malatya, Turkey, at the new Plaskolite and Işik Plastik plant, a facility which
will also have the capability and manufacturing capacity for possible future expansion of Plaskolite’s and Işik’s current product offerings.
“The importance of this venture for our global employees and customers cannot
be overstated,” said Mitch Grindley, Plaskolite’s Vice President of Marketing and
Sales. “Combining the strengths and technologies of this facility with our US
based manufacturing operations will allow Plaskolite to supply a wider array of
high quality plastic sheet products, which will continue to strengthen Plaskolite
now and in the future.”
“Our customers will immediately benefit from the addition of Pexco’s extruded
sheet products to Plaskolite’s already extensive product line,” added Mitchell P.
Grindley, Plaskolite’s Vice President of Marketing and Sales. “We will be able to
leverage our state-of-the-art production assets by moving the Pexco sheet production to our Ohio (Columbus and Zanesville) and Mississippi (Olive Branch)
facilities.” For more information on Plaskolite’s extensive products and solutions,
© 2014 Messe Düsseldorf GmbH
579
© 2014 Messe Düsseldorf GmbH
580
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
Plaskolite, Inc.
01.01.003
Acrylic glass (s. PMMA)
01.01.005
Acrylonitrile/butadiene/styrene copolymers
01.01.019
Copolyester TPE-O, COPE
01.01.035
Optical polymers
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
01.01.094
Polystyrene (PS)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
01.03.005
High-grade-resins
02.04.001.08
Semi finished products of polystyrene (PS)
01.03.028
Methacrylat resins for polymer concrete
02.05.007
Coatings
02.01.002
Products made by extrusion
02.05.027
Rubber / plastics combinations
02.01.004
Products made by calendaring
02.05.037
Light Louvres
02.02.001
Vapour-deposit decorating
02.05.044
Metalised parts
02.02.006
Embossing
02.05.047
Surface treated and decorated parts
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.005
Plastics products and parts for household/consumer
02.03.008
Plastics products and parts for data appliance
© 2014 Messe Düsseldorf GmbH
581
© 2014 Messe Düsseldorf GmbH
582
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Pleiger Unternehmensgruppe
Address
Im Hammertal 51
58456 Witten
Germany
Phone
+49 2324 398-0
Fax
+49 2324 398-354
Internet address
www.pleiger.de
E-Mail
info@pleiger-kunststoff.de
Stand
Hall 05, D02 (Page 874)
Product Overview
Pleiger Unternehmensgruppe
02.01.002
Products made by extrusion
02.01.003.01
by spray-up
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.01.008
Parts made by rotation moulding
02.01.009
Parts made by foaming
02.01.010
Parts made by injection moulding
© 2014 Messe Düsseldorf GmbH
583
02.03.001
Plastics products and parts for plant building
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.009
Plastics products and parts for agriculture
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.03
Semi finished products of polyamide (PA)
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.10
Semi finished products of polyurethane (PUR)
02.04.001.14
other and machined semi finished products / Pre-cut
parts
© 2014 Messe Düsseldorf GmbH
584
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.001
Apparatus and parts
02.05.056
Foam products
02.05.002
Armatures and parts
02.05.058
Hoses
02.05.003
Linings and coatings
02.05.061
Protective covers, hoods and wrappers
02.05.006
Cointainers
02.05.064
Spools and spool bodies
02.05.007
Coatings
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
02.05.010
Sealing profiles
02.05.066
02.05.011
Sealings/Sealrings
Structural foam parts according to sample, drawing or
customers tools
02.05.012
Torsion vibration damper / Vibration damper / -isolation
02.05.016
Bellows, expansible
02.05.024
Glass-fibre reinforced plastic parts (GRP)
02.05.025
Handles
02.05.034
Bearing boxes, bushes and sections
02.05.035
Bogie wheels and runners
02.05.040
Packing rings
02.05.041
Membranes
02.05.044
Metalised parts
02.05.049
Boards and vulcanite boards
02.05.050
Parts for pumps
Product Details
02.01.010
Pleiger Unternehmensgruppe
Parts made by injection moulding
Spritzgussartikel
Präzisionsteile aus thermoplastischen Kunststoffen sind
heute auf allen Gebieten der Technik im Einsatz und
ermöglichen erst viele Problemlösungen. Ursachen für
die stetige positive Entwicklung der technischen Kunststoffteile sind neben der ausgezeichneten chemischen
Resistenz vor allem
das geringe spezifische Gewicht vielfältige Formgebungsmöglichkeiten
die hohe erreichbare Festigkeit unterschiedlichste Eigenschaftseinstellungen durch Zugabe von Additiven oder Compoundierung unterschiedlicher Ausgangsprodukte die physiologische Unbedenklichkeit vieler
Thermoplaste das gute Kosten-Leistungsverhältnis
Schwerpunkt unseres Lieferprogramms ist die Herstellung technischer Präzisionsteile mit anspruchsvoller Formgebung nach Ihren Zeichnungen
oder Mustern aus allen hochwertigen Thermoplasten bis zu einem Stückgewicht
von ca.1500g. PS
Um den jeweils neuesten Stand der Produktentwicklung und Verarbeitungstechnologie anbieten zu können, stehen wir in ständigem Kontakt mit namhaften
Rohmaterial-Herstellern.
Wir verarbeiten u.a.
© 2014 Messe Düsseldorf GmbH
585
© 2014 Messe Düsseldorf GmbH
586
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Polyurethan ( TPU ) Polyamid ( PA ) Polycarbonat ( PC ) Polyethylen ( PE )
Polyacetalharz ( POM ) Polypropylen ( PP ) Polystyrol ( PS ) Polyvinylfluorid (
PVF )
02.04.001.14
other and machined semi finished products / Pre-cut
parts
PLEI-TECH® Rakelstreifen
Torsion vibration damper / Vibration damper / -isolation
Kupplungselemente
Zylindrische Puffer ballige Puffer eckige und überhöhte
Pakete ovale Pakete Sterne Scheiben
Aufgabe einer Kupplung ist es, Antriebskräfte elastisch zu
übertragen, Schwingungen und Stöße zu dämpfen sowie
radiale und axiale Wellenverschiebungen auszugleichen.
Alle diese Forderungen erfüllen die VULKOLLAN®-und
PLEI-TECH® Kupplungselemente in den verschiedenen
Ausführungen hervorragend.
Ein entscheidender Aspekt beim Siebdruck ist die Aufrechterhaltung einer scharfen Druckkante, wenn der Rakel mit aggressiven Farben und Lösungsmitteln in Kontakt kommt.
Plei-Tech® Rakelstreifen sind in einer Vielzahl von PolyurethanQualitäten erhältlich und können individuell auf die verschiedensten Anforderungen in der Siebdrucktechnik abgestimmt werden.
02.05.044
Metalised parts
VULKOLLAN®- und PLEI-TECH®- Metallverbindungen
UV-, Epoxy-, Emaille-, Vinyl- und andere auf Lösungsmitteln
basierende Farben reagieren extrem aggressiv gegenüber Rakel-Werkstoffen.
Weniger hochwertige Werkstoffe neigen zu einem beschleunigten Quellverhalten, da sie nur bedingt gegen aggressive Lösungsmittel resistent sind.
Hochwertige Werkstoffe, wie VULKOLLAN®, sind aufgrund ihrer chemischen
Beständigkeit und außergewöhnlichen Verschleißfestigkeit geeigneter für den
Einsatz von Farben, deren Inhalt hochgradige Lösungsmittel-Monomere sind,
weil ihre Shore-Härte und die Druckkante länger erhalten bleiben.
Plastisole, auf Wasser basierende Farben, UV-Farben sowie Farben, die weniger
aggressive Lösungsmittel enthalten, haben einen geringeren Einfluss auf das
Quellverhalten und erfordern/bedürfen daher nicht das Leistungsspektrum von
VULKOLLAN®.
Für Anwender, welche solche Farben verwenden, bietet Plei-Tech® D44 eine
passende Alternative.
Anhand unserer unterschiedlichen Farbgebung der Rakel, kann der Anwender
die einzelnen Shore-Härten leicht identifizieren.
Mit VULKOLLAN® und PLEI-TECH® beschichtete Bauteile eröffnen vielfältige
und individuelle Konstruktionsmöglichkeiten.
Zwischen VULKOLLAN® oder PLEI-TECH® und Metall lässt sich, nach entsprechender Vorbehandlung durch Sandstrahlen der Oberfläche, Entfetten und Auftragen
eines Haftvermittlers, eine ausgezeichnete Haftverbindung erzielen.
Das Metallbauteil, z.B. aus Stahl, Aluminium oder Guss, übernimmt hierbei die
Funktion als Tragkörper, die Beschichtung aus VULKOLLAN® oder PLEI-TECH®
die Anforderungen wie Verschleißschutz, Dämpfung oder Lärmminderung.
So bieten VULKOLLAN® und PLEI-TECH® auch hier als Teil einer Gesamtkonstruktion ein breites Anwendungsspektrum:
bevorzugt Räder-, Rollen- und Walzenbeschichtungen Kugeln mit massiven oder
hohlen Metallkernen sowie Beschichtungen von Ventilsitzen Auskleidungen, Scheuerleisten und Wurfschaufeln mit Befestigungsarmierungen Rohrreinigungsmolche
mit Stahl- oder Magnetkernen Sauger, Greifer und Dichtrahmen mit Metalladapter
02.05.050
Parts for pumps
Verschleißteile
PLEIGER Rakelstreifen sind in einer Vielfalt von Profilen verfügbar
Wenn in der Aufbereitungstechnik abrasive Stoffe gefördert,
gemahlen, klassiert oder von unerwünschten Bestandteilen
getrennt werden, sind diverse Maschinenteile besonderen Beanspruchungen ausgesetzt.
und können damit jeden individuellen Bedarf erfüllen.
© 2014 Messe Düsseldorf GmbH
02.05.012
587
© 2014 Messe Düsseldorf GmbH
588
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Deshalb muss das verwendete Material bei sämtlichen Geräten hinsichtlich Verschleißwiderstand extremen Ansprüchen genügen.
Typische Anwendungen:
POLAR-FORM Werkzeugbau GmbH
Address
Karl-Kammer-Str. 11
77933 Lahr
Germany
Phone
+49 7821 9503-0
Fax
+49 7821 9503-20
Internet address
www.polar-form.de
E-Mail
info@polar-form.de
Stand
Hall 02, C12 (Page 866)
Hydrozyklone Pumpenverschleißteile Auskleidungen von Mahlkesseln und Mahlscheiben,
Rührern und Schaufeln Siebmatten
02.05.056
Foam products
Integralschaumsystem
Integralschaum ist ein hochelastisches geschäumtes
Polyurethan
in Rohdichten von 300 - 650 kg/m3
Die Außenhaut ist geschlossen, während der Kern eine
offene Zellstruktur besitzt,
wodurch ein sehr gutes Dämpfungsverhalten erreicht wird.
Die besonderen Vorteile:
Abriebfeste, hochelastische Außenhaut Komfortabler, weicher, feinporiger Kern
Reißfest und elastisch, auch bei tiefen Einsatztemperaturen Sehr gute Witterungsbeständigkeit Enorme Vielseitigkeit durch Rohdichten-Varianten Ausgezeichnete Abbildungsgenauigkeit von Oberflächen Kombinationsmöglichkeiten
mit anderen Werkstoffen Sehr feine Schaumstruktur
Product Overview
POLAR-FORM Werkzeugbau GmbH
02.03.002
Plastics products and parts for automotive
02.03.012
Plastics products and parts for medical engineering
03.02.002.02
Injection moulding machines, multi-component
Einsatzbereiche
Freizeitin dustrieMas chinenbauB auindustri eMöbelindu strieIhre Branche - Für
Ihre Ideen
Product Details
02.03.002
POLAR-FORM Werkzeugbau GmbH
Plastics products and parts for automotive
Our products
POLAR-FORM can provide you with advice and detailed specialist know-how - so that you can always be
sure of working with molds and dies that ensure consistent and reliable production. This starts right from the
outset in the initial design phase; we can, at any time, visualize both dies and workpieces; all modifications can be implemented, viewed,
evaluated, and assessed end-to-end in 3-dimensional, virtual terms. The design
© 2014 Messe Düsseldorf GmbH
589
© 2014 Messe Düsseldorf GmbH
590
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
and prototype phase is supported by mold flow analyses conducted in-house.
Complex 2-component dies are mostly used in rotary procedures (i.e. a rotary
table or indexing plate). Of prime importance are not only the visual quality but
also the economy of plastic material (thin wall technology) as well as dimensional
accuracy and exact fit of the dies.
POLAR-FORM also offers you inmold labeling (IML) in conjunction with 1component and 2-component dies; we organize this in close cooperation with
labeling and handling companies.
In the 1-component dies sector we use a wide variety of technologies - including
conical slide, screw fitting, and multi-stage ejector systems.
Unscrewing molds: POLAR-FORM develops special molds for products with
male and female threads - also where a demolding mechanism is required.
Turning drives from POLAR-FORM stand out by virtue of their short unscrewing
and changeover times. Other impressive features are their stable design and
their excellent cooling characteristics.
POLAR-FORM develops rotary table systems individually designed according
to your own special requirements. These rotary tables - in different sizes - can
be installed in injection molding machines operating in the mold clamping range
of 40 to 500 tonnes.
02.03.012
Plastics products and parts for medical engineering
In the 1-component dies sector we use a wide variety of technologies - including
conical slide, screw fitting, and multi-stage ejector systems.
Unscrewing molds: POLAR-FORM develops special molds for products with
male and female threads - also where a demolding mechanism is required.
Turning drives from POLAR-FORM stand out by virtue of their short unscrewing
and changeover times. Other impressive features are their stable design and
their excellent cooling characteristics.
POLAR-FORM develops rotary table systems individually designed according
to your own special requirements. These rotary tables - in different sizes - can
be installed in injection molding machines operating in the mold clamping range
of 40 to 500 tonnes.
Polycasa GmbH
Address
Leukaard 1
2440 Geel
Belgium
Phone
+32 14 576772
Our products
Fax
POLAR-FORM can provide you with advice and detailed specialist know-how - so that you can always be
sure of working with molds and dies that ensure consistent and reliable production. This starts right from the
outset in the initial design phase; we can, at any time, visualize both dies and workpieces; all modifications can be implemented, viewed,
evaluated, and assessed end-to-end in 3-dimensional, virtual terms. The design
and prototype phase is supported by mold flow analyses conducted in-house.
Internet address
www.quinn-plastics.com
E-Mail
info@quinn-plastics.com
Stand
Hall 08a, K50 (Page 894)
Complex 2-component dies are mostly used in rotary procedures (i.e. a rotary
table or indexing plate). Of prime importance are not only the visual quality but
also the economy of plastic material (thin wall technology) as well as dimensional
accuracy and exact fit of the dies.
Company News
POLAR-FORM also offers you inmold labeling (IML) in conjunction with 1component and 2-component dies; we organize this in close cooperation with
labeling and handling companies.
© 2014 Messe Düsseldorf GmbH
591
10/16/2013
Polycasa GmbH
The new name in Plastic sheet
— the new name in plastic sheet.
Following both market and customer research, it became apparent that, while acknowledging the achieve-
© 2014 Messe Düsseldorf GmbH
592
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
ments of the past, the time has come to refresh and update our brand.
We are a pan-European company; the largest non-integrated manufacturer of
plastic sheeting (produced through a polymerisation process) on the Continent.
All of our manufacturing plants are in Europe; more than 80% of our sales come
from Europe. So, we needed a new brand name that encapsulates this, describes our business in a meaningful way, and builds on previous successes..
Product Overview
Polycasa GmbH
02.01.002
Products made by extrusion
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.004
Plastics products and parts for office equipment/
promotion
02.03.007
Plastics products and parts for electrical engineering
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.013
Plastics products and parts for furniture appliances
02.03.015
Plastics products and parts for transport/packaging
02.04.001.01
Semi finished products of acryl-nitrile-butadiene (ABS)
And so, our new identity was born: ‘Polycasa — your home for plastic sheet’.
The name is made up of two words, ‘Poly’ meaning ‘plastic’, and ‘casa’ which
is Latin for ‘house’. This roughly translates as the ‘home of plastics’, and also
reflects our pan-European presence. The strapline is our vision; we believe in it
— we’re proud to shout it.
Our logo is made up of circles, originating from a microscopic image of a polymer,
to represent the choice of products in our extensive range. The colours used are
fresh, perfectly illustrating the fresh approach to the business.
So, we’ve refreshed our brand to better describe what we are, what we do and
how we want to be recognised.
Now, moving forward, our aim — to set new standards within the world of plastic
— is underpinned by three key values: quality, loyalty and innovation.
Charles Shaw, Polycasa Managing Director, outlined our commitment: “We
guarantee the highest production values, consistently best service and absolute
loyalty to all our customers and suppliers. And because we’re an independent
company, we show fairness and transparency to everyone — our success is
built on trust. “
There’s certainly a solid foundation to build on. Polycasa offer the widest choice
of size, colour, pattern, coating, gauge and opacity for high-quality plastic sheet,
with a range that spans from acrylics through to polycarbonate, polyesters and
styrenics,
02.04.001.04
Semi finished products of polycarbonate (PC)
And in the past two years, Polycasa have introduced a portfolio of innovative products including a bird-friendly sound-barrier acrylic, a heavy-duty hardwearing plastic for industrial plants and a lenticular sheet capable of creating
dramatic visual effects.
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
Whether it’s simple picture framing, domestic fittings, retail environments or complex construction projects,
02.04.001.08
Semi finished products of polystyrene (PS)
Polycasa have the plastic sheet for any application. That’s why we’re known as
‘your home for plastic sheet’.
www.polycasa.com
© 2014 Messe Düsseldorf GmbH
593
© 2014 Messe Düsseldorf GmbH
594
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
The starting point in this product series is represented by a radio activated
display that can switch a display element with previously defined information
through radio wave energy input. The PolyIC product name for the radio activated displays is PolyLogo®-RAD, where RAD stands for Radio Activated Display.
PolyIC GmbH & Co. KG
Address
Tucherstr. 2
90763 Fürth
Germany
Phone
+49 911 20249-0
Fax
+49 911 20249-8001
Internet address
www.polyic.com
E-Mail
press@polyic.com
Stand
Hall 05, A19 (Page 874)
Praher Valves GmbH
Product Overview
PolyIC GmbH & Co. KG
Address
Poneggenstr. 5
4311 Schwertberg
Austria
Phone
+43 7262 611790
Fax
+43 7262 612030
Internet address
www.praher-valves.com
01.01.085
Polyethylene terephthalate (PET)
E-Mail
info@praher-valves.com
01.14.015
Metal polymer composites
Stand
Hall 05, F30-4 (Page 874)
02.02.003
Printing
Company News
Product Details
02.02.003
PolyIC GmbH & Co. KG
Printing
Extended Product Range
The Austrian Praher Valves GmbH, producer of plastic
valves for industrial piping systems, will show its extended product range of industrial valves in CPVC in
hall 5/F30-4.
PolyLogo®
PolyLogo®
PolyLogo® products are Smart Objects and consist of
thin, flexible and printed electronics, that may consist – besides the logic – from
various electronic devices. Examples are sensors, batteries, displays and control logics. In this way, flexible products are created, that can be integrated on
packaging or in labels. These products can be produced very inexpensively, so
new markets and applications can be opened.
© 2014 Messe Düsseldorf GmbH
06/18/2013
Praher Valves GmbH
595
New in its CPVC product range are cone check valves
and butterfly valves. This completes the Praher range
comprising industrial valves made of PVC-U and CPVC,
as well as PP and PVDF, with all standard end-connections,
operation elements and sealing materials.
© 2014 Messe Düsseldorf GmbH
596
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
06/18/2013
K6 - New Generation Wafer Type Check Valve
02.03.001
Plastics products and parts for plant building
This new generation wafer type check valve K6 stands out by
its new clap design with a conical sealing surface for highest
demands and long life-cycle.
Diaphragm Valves T4
This patented K6 wafer type check valve achieves considerably improved KV-values, and there is no need for a special
spacer for PVC- and PE SDR17-piping systems. The valve is
available in PVC-U with the sealing materials EPDM or FPM
and in the dimensions DN 40 up to DN 200.
Diaphragm valve T4 in PVC-U, PP or PVDF and different endconnections, like unions with sockets, thread sockets or PEending, spigots, loose or fix flanges, in the sealing materials EPDM or FPM, hand operated with lockable hand wheel
or pneumatically operated with accessories like positioner 420mA. Diaphragm valve T4 in PVC-U directly pneumatically
operated. Mounting plates for all our diaphragm valves T4.
Our range of diaphragm valves comprises:
Visit us at our booth no. 5F30-4 for detailed information about
this outstanding wafer type check valve!
02.05.002
Product Overview
Praher Valves GmbH
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.05.002
Armatures and parts
02.05.073
Valves
Product Details
02.01.010
Armatures and parts
2-way and 3-way ball valves S4
Our ball valve range comprises:
Praher Valves GmbH
Parts made by injection moulding
Wafer Type Check Valves K6, K4 and S4
2-way ball valves S4 in PVC-U, CPVC, PP or PVDF,
with different end connections, like sockets, thread
sockets, spigots, PE-connections or flanges, with the
sealing materials EPDM or FPM, hand operated or
electrically or pneumatically operated and accessories. 3-way ball valves S4 in
PVC-U, PP or PVDF with different end connections, like sockets, thread sockets, spigots, PE-connections or flanges, with the sealing materials EPDM or
FPM, hand operated or electrically or pneumatically operated and accessories.
Special-3-way ball valve S4 with limitation at 180° or 90° for the ultrafiltration
in the water treatment. PLS - Praher Labelling System: labelling tags in yellow
(standard), blue, green or red for the handle of all our S4 ball valves and K4 butterfly valves. Valve brackets in PVC-U or PP for our S4 ball valves. Laboratory
valve S4 with BSP- or NPT-thread and accessory set.
Our range of wafer type check valves comprises:
Our new K6 wafer type check valve in PVC-U with spring and
in sealing materials EPDM or FPM from DN40 to DN200. K4
wafer type check valve in PVC-U, PP or PVDF with optical
position indication and different springs in the sealing materials EPDM or FPM from DN65 to DN250. S4 wafer type
check valve in PVC-U, PP or PVDF for very big and very
small dimensions.
© 2014 Messe Düsseldorf GmbH
597
© 2014 Messe Düsseldorf GmbH
598
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.073
Valves
Preco - Europe, Inc.
Butterfly Valve K4
Address
81-82 Castle Street
CT1 2QD Canterbury, Kent
Great Britain / Northern Ireland
Phone
+44 1227 473900
Fax
+44 1227 473901
Internet address
www.precoinc.com
E-Mail
sales@precoinc.com
Stand
Hall 11, H26 (Page 902)
Our butterfly valve range comprises:
DN65-DN200 butterfly valves with body material in PPGF and flap materials made of PVC-U, PP, PVDF up
to operating pressure rate PN10 and sealing material
EPDM or FPM DN65-DN100 butterfly valves with body
material in PP-GF and flap material in CPVC up to operating pressure rate PN10 and sealing material EPDM or FPM Additional dimension DN65/d63 with body material in PP-GF in CPVC and PVC-U corresponding to DIN 2501 PN10 and sealing material EPDM or FPM Characteristics
of our K4 butterfly valves: only sleeve gasket and flap in touch with medium,
double sealed shaft, integrated bracket for fix point mounting, simple and quick
assembling of the actuator without any extra parts, 10 different disc locking positions, reliable „Locking-handle-system“, hand lever with marking plate (different
colours available), metal adapter between handle and shaft avoids abrasion of
the handle Our butterfly valves correspond to flange standards: DIN 2501 PN
10, ANSI B 16,5 Class150, JIS 10 K, BS Table D&E Available with hand lever,
with hand wheel, without actuation for mounting your own actuator, with electric
or pneumatic actuator
Product Overview
Preco - Europe, Inc.
02.01.005
Parts made by laminating
03.02.004.04
Other presses
03.03.004
Cutting machines
03.03.008
Punching and perforating machines
03.05.008
Laser beam welding machines
Product Details
02.01.005
Preco - Europe, Inc.
Parts made by laminating
Product Information
Preco, Inc., the pioneer in laser scoring, perforating and venting provides laser
systems and components designed specifically for flexible packaging applications.
We offer laser converting systems that are flexible, precise and process at very
© 2014 Messe Düsseldorf GmbH
599
© 2014 Messe Düsseldorf GmbH
600
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
high speeds. Each system provides innovative and cost-effective solutions for
laser-processing of flexible circuits, membrane switches, digital printed products
and medical devices.
Preco manufacturers standard & custom automated die cutting equipment. The
four-post hydraulic press is our standard die cutting system and features the
tightest tolerance on a production die cutter. Our rotary die cutting system allows
the most flexibility for registered web converting in the market today.
Preco custom builds laminators which features consistent registration for laminating sheet to sheet, sheet to roll and roll to roll.
» Uncompromising Hygiene
PROOFEX cap liner and wads are manufacture only
from the finest quality food grain raw material approved
by FDA. therefore, these conform to demanding international and Indian standards. chemically inert, odour
less and hygienic these ensure that any this seal with
PROOFEX liner will remain 100% uncontaminated - and protected from atmospheric impact as well. a PROOFEX lined cap effectively keep out moisture,
vapour, gas and even aroma.
» Reliably pilfer-proof
Proofex Packagings PVT. LTD.
Address
J-1042 Industrial Area Phase-III
301019 Bhiwadi
India
Phone
+91 1493 222626
Fax
+91 1493 223154
Internet address
www.proofex.net
E-Mail
info@proofex.net
Stand
Hall 05, B05-7 (Page 874)
Product Overview
» Diverse applications
PROOFEX cap liners and wads are already been used in variety of industries: Food Pharmaceuticals Cosmetics Liquor & Beverages Lubricants and may
more. such wide application is possible because PROOFEX liner are natural to
most acid, alkalis, chemicals and solvents.
» Customised products
While PROOFEX liner and wads are available in a wide range of standard dimensions, these are also offered with customised size, shapes and thickness depending upon your specific requirements.
Proofex Packagings PVT. LTD.
03.02.001.02.06
Extrusion lines for laminating and coating
02.04.001.05
Semi finished products of polyethylene (PE)
Product Details
02.04.001.05
The excellent sealing offer by liner ensure that no pilferage or loss though leakage will occur. in other words PROOFEX proudly guarantees that you products
is protected against any damages on account of inadequate sealing in this way,
not only are the bottles contents protected against deterioration, but shelf-life of
your product is also increased.
Proofex Packagings PVT. LTD.
Semi finished products of polyethylene (PE)
About Product
© 2014 Messe Düsseldorf GmbH
601
© 2014 Messe Düsseldorf GmbH
602
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
03/21/2013
PSI Brand
Address
15 Thames Street
4110 Napier
New Zealand
Phone
+64 6 8336043
Fax
+64 6 8350693
Internet address
www.psibrand.com
E-Mail
steve@psibrand.com
Stand
Hall 07.2, F15 (Page 888)
- It is vitally important to most plastic manufacturers to
track and trace product origin, date of manufacture and
multiple steps of the production process.Traditional
methods such as ’hot-stamping’, ’scribing’ and selfadhesive decals have been habitually used for this
purpose. Typically, when exposed to outdoor environments and harsh conditions, these methods of branding become damaged
through fading, chipping or even completely peel off thus deemed unrecognizable which contradicts the purpose of the marking.
At PSI Brand we combine barcode and serial numbering into the rugged construction of our permanent INMOULD and POSTMOULD graphics which allows
you to retain this identity and valuable information to provide accurate tracking
and traceability of plastic product years and years later.
Product Overview
Company News
03/21/2013
PSI BRAND NEW PRODUCTS
PSI Brand
PSI Brand
PSI BRAND ATTENDS ARMO IN FRANCE
Making impressions around the world at ARMO 2012
PSI Brand’s INMOULD and POSTMOULD graphic systems are making big impressions on the rotational and
injection moulding industry worldwide.
Having attended numerous international exhibitions over the years, PSI Brand
recently took the plunge and became exhibitors themselves. Customers had
mentioned for sometime, “We thought we’d see a PSI Brand stall at that show”.
After little deliberation, the team travelled more than 11,500 miles and took a
stand at the European Armo 2012 Convention in France at the end of October
2012. It was well worth it. Not only did the PSI Brand team establish lots of
new contacts, they also found that it was an opportunity to catch up with existing clients. Interest came from attendees and co-exhibitors alike, including
moulders, designers and suppliers.
Many of the people that the team spoke to were excited to learn that there is
an alternative to their current graphics provider, and that PSI Brand have been
developing their own INMOULD and POSTMOULD graphics solutions for more
than eight years, based upon years of experience in the moulding industry.
© 2014 Messe Düsseldorf GmbH
603
01.14.012
Paints, coatings
02.01.001
Parts made by blow moulding
02.01.008
Parts made by rotation moulding
02.01.010
Parts made by injection moulding
02.02.003
Printing
03.04.008
Equipment for In-Mould Decoration (IMD)
Product Details
02.01.001
PSI Brand
Parts made by blow moulding
© 2014 Messe Düsseldorf GmbH
604
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
PERMANENT GRAPHICS FOR BLOW MOULDED
PARTS
PSI Brand extends their range of graphic applications
to also suit blow moulded plastic parts. 3 graphic types
have their own special features to suit each application
of the blow moulding industry. These graphics are another tried, tested and proven labeling system to permanently decorate and enhance your plastic products.
Featuring the finest pigments and clear coats available, PSI Brand graphics
are sure to meet every plastic decorating demand through whatever application. Once moulded to the product these graphics offer superior resistance to
chemicals, abrasion and prolonged outdoor exposure. We have designed these
graphics to last as long as your part!.
02.01.008
Brand graphics are sure to meet your decorating demands, whatever the application. Once moulded to the product these graphics offer superior resistance to
chemicals, abrasion and prolonged outdoor exposure. We have designed these
graphics to last as long as your part!
02.02.003
Printing
PRINTED GRAPHICS FOR PERMANENT MARKING OF PLASTIC PARTS
PSI Brand manufactures and supplies permanent in-mould and
post-mould graphic systems to many plastic product manufacturers, fabricators and OEM’s world-wide.
These truely unique graphic systems enable any logo or label
design, barcode or sequential number, warning or instruction label, four colour process prints or decorative designs to be embedded permanently into a plastic article.
Parts made by rotation moulding
PERMANENT GRAPHICS FOR ROTATIONAL MOULDED
PARTS
Most commonly used in rotational and injection moulding environments, the
graphics are also suitable for blow moulding and thermoforming applications.
PSI Brand has developed 3 types of graphics specifically for rotational moulded plastic parts. Each type is
designed to enhance the ease of application in all areas
of the rotational moulding industry. These graphics are
the tried, tested and proven simple labeling processes for permanently decorating your plastic products. Featuring the finest pigments and clear coats available, PSI Brand graphics are a rugged concept which will not chip or separate
during application. Once moulded to the product these graphics offer superior
resistance to chemicals, abrasion and prolonged outdoor exposure. We have
designed these graphics to last as long as your part!
Having a past history in rotational and injection moulding of over 30 years and
experiencing years of frustration in using other graphic systems and inferior labeling processes. We set ourselves to perfect what we have strived to achieve;
some simple, application friendly, permanent and aesthetically pleasing graphic
systems for plastic.
Outstanding features of these graphics include: Designed to resist chemical
and UV attack, hassle free easy application, time saved & less rejected parts,
fast efficient service anywhere in the world, cost effective branding solutions,
permanently tough, permanently good looking.
The PSI Brand graphics use the same pigments as used in the auto trade.
02.01.010
Parts made by injection moulding
PERMANENT GRAPHICS FOR INJECTION MOULDED
PARTS
PSI Brand has developed 4 types of graphics all suited
for use on injection moulded plastic parts. Each type
has its own special features to suit each application of the injection moulding industry. These graphics are another tried, tested and proven labeling system to
permanently decorate and enhance your Polyethylene, Polypropylene or PVC
plastic products. Featuring the finest pigments and clear coats available, PSI
© 2014 Messe Düsseldorf GmbH
605
Independent trials have been conducted using a QUV Accelerated Weatherometer. The graphics have withstood 2500 hours with no appreciable colour change
or deterioration evident. Accelerated weathering tests cannot be precisely related to actual outdoor performance but it is considered that 2500 hours of exposure is equivalent to up to 7 years outdoor exposure in temperate climate.
© 2014 Messe Düsseldorf GmbH
606
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.003.01
Parts from standard plastics
02.04.003.02
Parts from engineering plastics
02.05.004
Fastenings
Pöppelmann Kunststoff-Technik GmbH Co. KG
Address
Daimlerstr. 9
49393 Lohne, Oldenburg
Germany
Phone
+49 4442 982620
02.05.011
Sealings/Sealrings
Fax
+49 4442 982668
02.05.023
Casings and cabinets
Internet address
www.poeppelmann.com
02.05.024
Glass-fibre reinforced plastic parts (GRP)
E-Mail
info@poeppelmann.com
02.05.027
Rubber / plastics combinations
Stand
Hall 05, B46 (Page 874)
02.05.032
Laboratory equipment- technical parts
02.05.050
Parts for pumps
02.05.075.01
Fibreglass-reinforced plastic parts
Product Overview
Pöppelmann Kunststoff-Technik GmbH Co. KG
02.01.010
Parts made by injection moulding
02.02.005
Welding
02.03.002
Plastics products and parts for automotive
Product Details
02.01.010
Pöppelmann Kunststoff-Technik GmbH Co. KG
Parts made by injection moulding
Pöppelmann TEKU®
02.03.007
Plastics products and parts for electrical engineering
Pöppelmann TEKU® - a strong and reliable partner.
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.014
The diversity of the TEKU® programme over 800 products in more than 2,000 versions offers the ideal solution for every cultivation.
Plastics products and parts for food processing
industry
© 2014 Messe Düsseldorf GmbH
The business division Pöppelmann TEKU® develops
and produces plant pots and cultivation systems for the
professional horticultural industry.
607
© 2014 Messe Düsseldorf GmbH
608
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.012
Plastics products and parts for medical engineering
R+S Technik GmbH
Pöppelmann FAMAC®
Address
Teutonenstr. 2-10
46395 Bocholt
Germany
Phone
+49 6109 7123-0
Fax
+49 6109 7123-99
Internet address
www.rstechnik.de
E-Mail
info@rstechnik.de
Pöppelmann K-TECH®
Stand
Hall 04, A21 (Page 870)
Pöppelmann K-TECH® - High-Precision Engineered
Injection-Moulded Parts.
Company News
Consistently Implemented Plastics Expertise: Pöppelmann FAMAC®
Pöppelmann FAMAC® develops and manufactures plastic functional components and packaging for the most
demanding applications. To manufacture plastic products for the food, pharmaceutical, cosmetics, and medical industry, Pöppelmann
FAMAC® meets the highest demands in terms of cleanliness and hygiene. If
special requirements are needed, Pöppelmann FAMAC ® has a clean room facility available.
02.04.003.02
Parts from engineering plastics
Short development cycles
09/02/2013
R+S Technik GmbH
PPI Tools and Plant Equipment
Excellent results based on many years of experience
Highest standards
Dynamics – Quality – Functionality – Flexibility
First class solutions for challenging projects
For more than 60 years R+S has been engaged in
the development and the construction of machines and
tools designed for the production of interior and exterior components for the automotive supply industry.
Everything from one source
From Development to serial production
Beginning with the foundation as Röder & Spengler Stanztechnik in the year
1958 followed by various development stages (at last: takeover of the business
activity by the present R+S Technik GmbH in the year 2008) R+S has made a
name as being an innovative, flexible and reliable business partner until today.
Decisive for the dynamics of the company’s development is the high quality and
functionality of the range of machines and tools. For the solution of complex
problems the flexibility is equally a particular asset of R+S Technik.
Permanent investments for maintaining a high standard in the field of construction and material technology are the guarantee for ranking among the market
leaders in this industry in the future, too.
PPI Tools and Plant Equipment
© 2014 Messe Düsseldorf GmbH
609
© 2014 Messe Düsseldorf GmbH
610
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
3 Processes in one Step
A combination of the processes Pressing/Molding, Trimming of the Component
and Simultaneous Back Injection Molding of Fastening Elements and Reinforcing Ribs.
Product Overview
R+S Technik GmbH
02.01.005
Parts made by laminating
02.01.007
Parts made by compression moulding
02.01.009
Parts made by foaming
02.01.011
Parts made by termoforming
02.03.002
Plastics products and parts for automotive
The wide spectrum of R+S Technik GmbH comprises tool technology, plant technology and the development of components.
03.02.004.04
Other presses
The field of tool technology offers the production of prototype and series tools
as well as the tool design including preparation of the mold flow analysis.
03.04.004
Laminating plant
The range of component development offers the development of natural fiber
and spray cast components up to the production of prototypes.
03.05.001
Hot-plate welding machines
Our company offers the complete plant technology including injection molding
units and additionally manual up to fully-automatic feeding and removal systems.
03.06.001
Injection and compression moulds
03.06.006
Other moulds
This technology is particularly suitable for components in the field of interior
equipment such as rear package trays, door side trim panels and rear luggage
covers.
Advantages of the Process
Natural fiber material, renewable primary productsLighter in comparison with a
spray cast carrierLower plant investmentLess tools required in comparison with
conventional production processesBase carrier and attachment elements on the
same thermoplastic basisCarrier permeable to air
We deliver single source!
Complete project handling from prototype to series.
Do you want to find out more about us and our products?
Come and see us at the fair “K2013” in Düsseldorf!
Hall 04
Stand A21
© 2014 Messe Düsseldorf GmbH
611
© 2014 Messe Düsseldorf GmbH
612
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Mögliche Shorehärten von 55 - 95° Shore A
RECA plastics GmbH
Address
Hinter der Jungenstr. 6
56218 Mülheim-Kärlich
Germany
Phone
+49 261 98817-0
Fax
+49 261 98817-29
Internet address
www.reca-plastics.com
E-Mail
info@reca-plastics.com
Stand
Hall 07a, B39 (Page 880)
Product Overview
02.04.001.10
Reinert-Ritz GmbH
RECA plastics GmbH
Address
Ernst-Heinkel-Str. 2
48531 Nordhorn
Germany
Phone
+49 5921 8347-0
Fax
+49 5921 8347-25
Internet address
www.reinert-ritz.com
E-Mail
contact@reinert-ritz.com
Stand
Hall 07a, B16 (Page 880)
Semi finished products of polyurethane (PUR)
Product Details
RECA plastics GmbH
Product Overview
Reinert-Ritz GmbH
02.03.001
Plastics products and parts for plant building
PU HALBZEUGE
02.03.003
Plastics products and parts for building applications
RECATHAN® Platten 70°/80° oder 90° Shore A.
02.04.001.05
Semi finished products of polyethylene (PE)
In den Maßen 3000 x 1000 mm und Dicken von 1 bis
50 mm. Natürlich sind auch Sondermaße möglich.
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.10
Semi finished products of polyurethane (PUR)
Rundstäbe 70°, 80° oder 90° Shore A
Standardmaße 8-200 mm x 1000 mm, Zwischengrößen auf Anfrage.
Neben dem umfangreichen Halbzeugsortiment wie Platten, Rundstäben, Hohlstäben
und Federelementen gehören auch Formteile -mit und ohne
Metall- zum Lieferumfang.
Eine mechanische Nacharbeit wie wasserstrahlen, fräsen, bohren, sägen,
stanzen und schweißen bietet ein flexibles Potential vom Einzelteil bis zur Serie.
© 2014 Messe Düsseldorf GmbH
613
© 2014 Messe Düsseldorf GmbH
614
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.03.001
Reinert-Ritz GmbH
T-Stücke, Abzweige und Hosenstücke
T-Stücke, Abzweige und Hosenstücke
Plastics products and parts for plant building
PE 100 schwarz oder PP-R bis DA 2000 mm
Sonderflanschverbindungen & HP-Flansch
Sonderflanschverbindungen
PE 100 schwarz oder PP-R bis DA 2000 mm
Nennweitengerechter Anschluss an Armaturen ohne
Innenversatz
02.04.001.05
Semi finished products of polyethylene (PE)
Hohlstäbe & Vollstäbe
HP-Flansch (High Pressure)
Hohlstäbe
PE 100 schwarz oder PP-R bis DA 2000 mm
PE 100 schwarz oder PP-R bis DA1850
Kunststoffgerechte Flanschverbindung bis 25 bar
Vollstäbe
T-Stücke, Abzweige und Hosenstücke
PE 100 schwarz oder PP-R bis DA1120 mm
T-Stücke, Abzweige und Hosenstücke
PE 100 schwarz oder PP-R bis DA 2000 mm
02.04.001.07
Semi finished products of polypropylene (PP)
Hohlstäbe & Vollstäbe
Hohlstäbe
PE 100 schwarz oder PP-R bis DA1850
02.03.003
Plastics products and parts for building applications
Vollstäbe
PE 100 schwarz oder PP-R bis DA1120 mm
Sonderflanschverbindungen & HP-Flansch
Sonderflanschverbindungen
PE 100 schwarz oder PP-R bis DA 2000 mm
Nennweitengerechter Anschluss an Armaturen ohne
Innenversatz
HP-Flansch (High Pressure)
PE 100 schwarz oder PP-R bis DA 2000 mm
Kunststoffgerechte Flanschverbindung bis 25 bar
© 2014 Messe Düsseldorf GmbH
615
© 2014 Messe Düsseldorf GmbH
616
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
im Bereich Stanzen, Perforieren, Prägen
Ring Maschinenbau GmbH
Address
• Verbesserungswünschen bei Qualität, Effektivität
Adam-Müller-Str. 74
66954 Pirmasens
Germany
• Rationalisierung und Kosteneinsparungen
• Energieeffizienz-Studien, Berechnungen
Phone
+49 6331 51810
• Schulung Ihres Personals, zur Steigerung von Effektivität + Qualität Ihrer
Vorgänge und Verfahren
Fax
+49 6331 92422
02.10.2013
Internet address
www.ring-perforating.de
E-Mail
kontakt@ring-perforating.de
Neu und innovativ ist auch das hydraulische Antriebskonzept der Präge- und
Stanzmaschinen - die Servohydraulik- die neue Generation der hydraulischen
Antriebstechnik
Stand
Hall 03, C05 (Page 868)
Company News
02.10.2013
Ring Maschinenbau GmbH
Profitieren Sie von unserem neuen Technologie-,
Entwicklungs-, Versuchs und Schulungszentrum in
Pirmasens
Die Servohydraulik
Mit der Servohydraulik sparen Betreiber bis zu 50% an Energiekosten im Vergleich zu klassischen Hydraulikantrieben. Dieser hydraulische Antrieb kommt
ohne klassische Ventiltechnik aus. So wird auf die typische Ventilsteuerung
verzichtet. Merkmale der Servohydraulik sind der variable Volumenstrom, die
dadurch erreichbare Dynamik und die niedrige Geräuschemission. Die Servohydraulik ermöglicht eine optimale Kraft- und Geschwindigkeitsanpassung an
den Präge- und Stanzvorgang.
Product Overview
Durch die Neue Allianz des weltweiten Marktführer
für Hightech-Stanz Technologie und Anlagenbau
Ring Maschinen-, Werkzeugbau und
dem Werkzeughersteller Arnold mit über 85
Jahren Erfahrung in der Herstellung von Bandstahl,
Ring Maschinenbau GmbH
02.02.006
Embossing
03.03.008
Punching and perforating machines
03.04.003
Embossing equipment
Schmiedemessern, Matrizzen in den
Bereichen Forschung - Entwicklung, Testvorgänge
und Ausarbeitung integrierter Koplettlösungen
fürr Stanz - Perforier - Praegeprobleme
und Schulungsangeboten Ebenfalls aus
Pirmasens koennen Sie wie folgt profitieren.
Wir bieten Ihnen :
• Beratung bei bestehenden Problemen, Einführung neuer Produkte, Materialien
© 2014 Messe Düsseldorf GmbH
617
© 2014 Messe Düsseldorf GmbH
618
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Riwisa AG Kunststoffwerke
Address
Sonnhalde
5607 Hägglingen
Switzerland
Phone
+41 56 6169393
Fax
+41 56 6169330
Internet address
www.riwisa.ch
E-Mail
info@riwisa.ch
Stand
Hall 12, A51-8 (Page 906)
Product Overview
02.03.005
Plastics products and parts for household/consumer
02.03.007
Plastics products and parts for electrical engineering
02.03.008
Plastics products and parts for data appliance
02.03.009
Plastics products and parts for agriculture
02.03.010
Plastics products and parts for aviation
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.03.016
Plastics products and parts for optics/precision
engineering
Riwisa AG Kunststoffwerke
02.01.011
Parts made by termoforming
02.02.002
Galvanization
02.04.001.03
Semi finished products of polyamide (PA)
02.02.003
Printing
02.04.001.04
Semi finished products of polycarbonate (PC)
02.02.005
Welding
02.04.001.05
Semi finished products of polyethylene (PE)
02.03.001
Plastics products and parts for plant building
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.03.002
Plastics products and parts for automotive
02.04.001.07
Semi finished products of polypropylene (PP)
02.03.003
Plastics products and parts for building applications
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
© 2014 Messe Düsseldorf GmbH
619
© 2014 Messe Düsseldorf GmbH
620
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
02.04.003.01
Parts from standard plastics
02.03.005
Plastics products and parts for household/consumer
Plastiv products
02.04.003.02
Parts from engineering plastics
Product Details
02.01.011
Packaging by RIWISA AG is a name that guarantees quality products.
Riwisa AG Kunststoffwerke
Parts made by termoforming
Flexible production of injection-moulded plastic parts
Using dry offset printing process our infrastructure allows precise printing of
products in up to 8 colours.
An exemplary solution for flexible production of injectionmoulded plastic parts has been realised as a pioneering
accomplishment in RIWISA AG’s industrial division.
The main computer, acting as a central control and
guidance system, is responsible both for the procedure
of setting up as well as the exchange of data between injection moulding machines and the portal robots for the preparation and distribution of material. The
automatic replacement of tools and melting aggregates is carried out by our
portal robot. The latter fetches the necessary moulds and aggregates from the
warehouse and initially places them in the preheating station. There, both components are brought up to the required operating temperature while the previous
production batch is still being processed. This process increases the efficiency
and ensures maximum utilisation of our capacities.
The distribution and data monitoring is carried out using the integrated production planning and control system (PPS). The key to this complete automation
lies in the production cells, constructed on the modular system, which for their
part are interconnected through polyvalent interfaces.
The two-component injection moulding technique is also considered to be a speciality of RIWISA AG. Here two different materials are processed in a single injection process to produce a part. This process makes finishing and expensive
sequential operations superfluous.
In the adjacent finishing department sequential operations such as ultrasonic
vibration welding and orbital welding, bonding, stamping, laser printing and vacuum aluminising are carried out semi or fully automatically through to the readyfor-sale packaging stage.
© 2014 Messe Düsseldorf GmbH
RIWISA AG’s range of products includes the manufacture
of polystyrene film with up to three layers, thermo forming containers for dairy and catering products as well as
injection moulding cups and special products rounds off a
unique packaging program. Using the most modern equipment, whether injection moulding or thermo forming we produce several million
items per day.
621
For our products we only use environmental friendly raw materials which fulfil all
the FDA standards.
02.03.012
Plastics products and parts for medical engineering
Plastic products medical engineering
In the medical field RIWISA AG produces medical devices,
implants and disposable items for a worldwide active clientele. Here we work according to class C clean-room conditions.
Our philosophy is focused on global competition with demanding customers.
An innovative team guarantees current know-how and, in
co-operation with the customer, develops simple to complex products to the
highest level. This is always carried out taking economical aspects into account.
Qualified specialists accept responsibility for the subsequent realisation of products of suitable quality.
If required all development and production activities will be implemented in accordance with current Good Manufacturing Practice (cGMP).
With our new products we are equipped for the future. Challenge us!
© 2014 Messe Düsseldorf GmbH
622
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Robor S.r.l.
Address
Vicolo Piersanti Mattarella, 6
31055 Quinto de Treviso / TV
Italy
01.04.012
Polyisocyanurate foams
01.04.017
Polystyrene foams
01.04.018
Polyurethane casting resins (PUR)
01.04.019
Polyurethane casting resins rigid structural
foams-RIMsystems
01.04.020
Polyurethane casting resins semi-rigid structural
foams-RIM-systems
Phone
+39 0422 454347
Fax
+39 0422 454348
Internet address
www.robor.it
E-Mail
info@robor.it
01.04.021
Polyurethane casting resins rigid foams-systems
Stand
Hall 11, E59 (Page 902)
01.04.022
Polyurethane casting resins semi-rigid foams-systems
01.04.023
Polyurethane casting resins flexible foams-systems
01.04.025
Polyisocyanates
01.09.024
Polyurethanes
01.12.002
Basalt fibres
01.12.006
Glass fibres (s. Textile glass)
02.05.054
Sandwich cores
02.05.056
Foam products
03.02.002.02
Injection moulding machines, multi-component
Product Overview
Robor S.r.l.
01.01.094
Polystyrene (PS)
01.01.095
Polystyrene expandable (EPS)
01.01.100
Polyurethane thermoplastic (PUR)
01.02.006
Polyisocyanate
01.02.007
PUR-Elastomers
01.02.011
Thermoplastic PUR-elastomer
01.03.039
PU elastomers
© 2014 Messe Düsseldorf GmbH
623
© 2014 Messe Düsseldorf GmbH
624
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
03.02.004.03
Double belt presses
03.02.005.02
Reaction moulding machinery and plant
03.02.005.07
Spraying equipment
03.03.001
Rolf Körner GmbH
Address
Neue Str. 14-16
52382 Niederzier
Germany
Thermoforming machines
Phone
+49 2428 9419-0
03.03.002
Bending, folding and edgetrimming machines
Fax
+49 2428 5980
03.03.004
Cutting machines
Internet address
www.rolfkoerner.de
03.03.006
Slitter rewinders
E-Mail
info@rolfkoerner.de
03.03.009
Milling machines
Stand
Hall 09, A78 (Page 898)
03.07.005.01
Stacking devices
03.07.005.05
Equipment for palletizing
Product Overview
Product Details
02.05.054
Robor S.r.l.
Rolf Körner GmbH
02.05.020
Filters and parts
03.01.006
Screen changers
03.01.007
Melt filters
Sandwich cores
Continuous sandwich panel line
This kind of plant is able to produce in continuous cycle
sandwich panels with core in expanded polyurethane,
glass wool at oriented fibers, rock wool at oriented fibers
or polystyrene coupled to galvanised, inox or pre-painted steel sheets profiled
on line or other similar supports.
Sheets profiling line Insulating materials preparation line Polyurethanes foaming
and metering unit Continuous press ”On the fly” cutting Cooling station Tilter /
Stacker Packing machine Suction plant
© 2014 Messe Düsseldorf GmbH
625
Product Details
02.05.020
Rolf Körner GmbH
Filters and parts
Filter elements in different executions
We produce filter elements in nearly unlimited variety.
As smooth or pleated elements they are used for the
filtration of fluids. According to material and application
the following joints are possible: • spot welding • cylindric
seem welding • plasma welding • traditional soldering •
adhesing
© 2014 Messe Düsseldorf GmbH
626
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Wire Cloths
Product Details
We manufacture and supply a wide range of wire cloths
which are available from our stock.
SMA Motor Range
02.05.050
material: stainless steel, plain steel, galvanized steel,
copper, brass, phosphorus bronze, special alloys
mesh width:0.003 to 10 mm (other dimensions on request)
fabric width: up to 6.000 mm
scope :standard rolls, cuttings on custumor´s requirement
Kinds of weaving:plain or twilled weave, plain or twilled Dutch weave,reversed
plain or twilled Dutch weave
Rotary Power Vertriebsgesellschaft m.b.H
Parts for pumps
A range open circuit heavy duty, fixed and variable, Axial Piston Pumps and Motors. Capacities from 11.5 to 125 cm3/rev with a wide range of controls. C range
Axial Piston Pumps for high accuracy fluid metering with precision metering controls.XL motors are of radial piston-cam configuration and provide the efficiencies and pressure capabilities typical of HTLS motor design. Various mounting
options are available for this compact motor.SMA motors are able to satisfy the
heaviest duty application. This is a radial piston/eccentric with a hydrostatically
balanced rotating assembly. SMA is capable of withstanding high mechanical
and hydraulic shock loads. Standard, high power and industrial versions are
available
Rotary Power Vertriebsgesellschaft m.b.H
SAINT-GOBAIN PPL FRANCE
Address
Phone
Fax
Nordstr. 78
52078 Aachen
Germany
Address
La Mothe aux Aulnaies, B.P.14
89120 Charny Cedex
France
Phone
+1 330 798-6902
+49 241 95519-0
+49 241 95519-19
Fax
Internet address
E-Mail
Stand
www.rotarypower.de
www.plastics.saint-gobain.com
E-Mail
david.a.himmelein@saint-gobain.com
Stand
Hall 08a, H33 (Page 894)
info@rotarypower.de
Hall 10, J78 (Page 900)
Product Overview
02.05.050
Internet address
Rotary Power Vertriebsgesellschaft m.b.H
Parts for pumps
© 2014 Messe Düsseldorf GmbH
627
© 2014 Messe Düsseldorf GmbH
628
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
09/06/2013
SAINT-GOBAIN PPL FRANCE
Saint-Gobain Seals Group’s Rulon® J Fluoropolymer
Material ASTM Certified for Flammability, Smoke and
Toxicity (FST)
Saint-Gobain Seals Group’s Rulon® J, one of their fluoropolymer grades, was
recently certified for mass transit applications such as in trains and aircraft in regards to specific safety requirements for flammability, smoke and toxicity (FST).
While composites are an excellent technology for weight reduction, most thermoset resins carry some safety risk in mass transit applications due to confined
spaces and difficult and dangerous evacuation situations. Federal and local
safety requirements have been established for control of fire, smoke and toxicity
risks.
Specific flammability and smoke density testing were performed according to
ASTM standards. ASTM (American Society for Testing and Materials) is a globally recognized leader in the development and delivery of international voluntary
consensus standards and more than 12,000 of their standards are used around
the world to improve product quality, enhance safety, facilitate market access
and trade, and build consumer confidence.
Rulon® J material was certified according to ASTM E162-11 – “Surface flammability of materials using a Radiant Heat Energy Source” and ASTM E662-09 –
“Standard Method for specific Optical Density of Smoke Generated by Solid Materials,” which meets the requirements of Specification section T.S. 205.A.3.a,
flammability and smoke emission under Title 49CFR 238.103 for vehicle components. Because the material performs to ASTM FST flame and smoke standards, it is considered to have flame spread and smoke concentration rates slow
enough to give passengers sufficient time to disembark the vehicle more safely.
ASTM E162 measures flame spread and testing is performed where a panel’s
top edge is exposed to a 670°C/1238°F heat source placed at a distance of
11.9 cm/4.7 inches. The test is run until either the flame reaches the bottom
edge or until 15 minutes elapses. The flame spread index is calculated, based
on the distance the flame traveled and the amount of heat generated from the
material. ASTM E662 determines smoke density and tests are run with and
without a flame run for a maximum of 20 minutes, with optical smoke density
measurements taken at specified intervals to determine the maximum smoke
density.
Toxicity testing was performed according to Boeing Specification Support Standard BSS 7239 for Toxic Gas Generation by Materials on Combustion and meets
the requirements of Specification section T.S. 205.A.3.c for maximum toxic gas
release limit. The Boeing test method employs a flamed heat source in a
© 2014 Messe Düsseldorf GmbH
629
smoke chamber to gauge toxic fume concentration of six gases – carbon monoxide (CO), hydrogen fluoride (HF), hydrogen chloride (HCl), hydrogen cyanide
(HCN), nitrogen oxides (NOx) and sulfur dioxide (SO2) and concentration levels
are recorded at specified time intervals.
Rulon®J material is part of the Seals Group’s polymers product line and operates extremely well against soft mating surfaces, has excellent wear resistance,
is non-abrasive and has one of the lowest coefficient of friction of most reinforced PTFE materials. The Rulon® brand consists of a family of proprietary,
homogeneous materials that are mostly composed of PTFE based resins, and
products include bearings, rings, tapes, formed parts, basic shapes and wear
components. Primarily used in mechanical, electrical and chemical applications,
Rulon® material withstands a variety of harsh environments such as extreme
dryness, cryogenic temperatures, water, steam and hydrocarbon fuel. It is ideal
for space applications (one of the harshest environments); Rulon® ball bearings
were installed on the NASA rover Curiosity that was launched to Mars in November 2011 and where the rover is still exploring the surface for new discoveries.
The Rulon® product as well as Saint-Gobain Seals Group’s other material line,
Meldin®, will be featured at the K Trade Fair 2013 (an international plastics and
rubber show) in Düsseldorf, Germany from October 16-23. The Seals Group will
be exhibiting with other Saint-Gobain businesses: Process Systems, Healthcare
and Films.
For more information about the Seals Group’s Rulon® product, their other
polymer and sealing solutions or the K show, please visit www.seals.saintgobain.com.
09/06/2013
Saint-Gobain Seals Group’s Fluoroloy® A79 Receives
Different EU Certifications for Food Applications
Saint-Gobain Seals Group has recently received EU certification for their custom formulated compound, Fluoroloy® A79, regarding direct food contact. As
food contact materials come into contact with the food, molecules can migrate
from the food contact material to the food, and because of this, many countries
have established regulations and rigorous testing to ensure food safety. Food
contact materials can be constructed from a variety of materials such as plastics,
rubber, paper, coatings, metal, or a combination of materials.
Fluoroloy® A79, a plastics material, meets the requirements of the European
Commission Regulation (EU) No 1935/2004 and 10/2011 with the use of Simulant C (20% ethanol); it was tested for specific and overall migration and all
results were below the maximum limit. Fluoroloy® A79 is currently being used
as the jacket material for seals within industrial ice cream machines but is also
compliant with other food processing equipment. In addition to the EU certi-
© 2014 Messe Düsseldorf GmbH
630
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
fication, Fluoroloy® A79 also meets US Food and Drug Administration (FDA)
requirements for materials which have repeated contact with food or drugs for
oral consumption.
Aside from Fluoroloy® A79, Saint-Gobain Seals Group’s offers more than 80
standard Fluoroloy® grades. Several other Fluoroloy® grades are available
for food applications that are also compliant with EU regulation 1935/2004 and
10/2011, FDA, USP Class VI, USDA and 3A Sanitary.
Fluoroloy® is a registered trademark of Saint-Gobain Seals Group, consisting
of a family of proprietary materials that are composed primarily of polytetrafluoroethylene (PTFE) based resins and developed to perform in the most diverse
and extreme applications for various markets such as Oil & Gas, Automotive,
Aerospace and Life Sciences.
This material is also being used for the jacket material to manufacture OmniSeal®, high-performance spring-energized seals with excellent chemical resistance and physical, thermal and tribological properties. In the Oil & Gas Industry, OmniSeal® seals will be utilized on the world’s first subsea gas compression station in the Åsgard field offshore Norway, which will be installed in 2015.
The material has been certified to the NORSOK M710rev2 and API 6A standards, making the Seals Group one of few companies to reach this high level of
compliance. In the Life Sciences industry, OmniSeal® seals are often used in
surgical tools and are part of the only full-powered, reusable, battery operated
endoscopic stapler in the world.
For more information about Fluoroloy®, OmniSeal® or other Saint-Gobain Seals
Group sealing and polymer solutions, please visit www.seals.saint-gobain.com.
09/05/2013
SAINT-GOBAIN PERFORMANCE PLASTICS
LABORATORY DIVISION LAUNCHES ENHANCED WEB
SITE
Product and Technical Information Create a User-Friendly Experience for Life
Science Researchers
June 20, 2013
Saint-Gobain Performance Plastics (SGPPL) invites visitors to explore the
new, enhanced Web site for the company’s Laboratory Division. The site,
http://www.LabPure.com, features improved usability and content for products
supporting work conducted in research, development, environmental and test
laboratories worldwide. The site is part of SGPPL’s ongoing effort to increase
the availability of product information to distributors and end-user customers.
The site highlights Saint-Gobain’s products for the healthcare and life science
© 2014 Messe Düsseldorf GmbH
631
markets—including Tygon® flexible tubing; Chemware® fluoropolymer labware;
injection and lyophilization stoppers; LabPure® chromatography vials and closures; and single-use Bio-Simplex™ bottles, flasks and manifolds equipped with
C-Flex® and Sani-Tech® fluid transfer components for cell culture.
The site also features a new Closure Configuration Station to customize closures
for specialized applications, and receive an expedited e-quotation. Additionally,
customers can download and print technical data sheets and catalogs. There
is also an opportunity to participate in a Cell Culture Discovery Interview to influence the company’s product development pipeline. Navigation is easy, and
sales team and distributor contact information is readily accessible.
”The new Web site enhances the on-line experience with straightforward, detailed descriptions of our innovative products, as well as facilitates contact with
local distributors,” said Katia May, Market Manager for the Laboratory Division
at Saint-Gobain Performance Plastics. ”We’re proud of the site’s new look and
enhanced usability, and are excited about giving customers valuable information
regarding our products and capabilities.”
About Saint-Gobain Performance Plastics
Saint-Gobain Performance Plastics (SGPPL) is a subsidiary of Saint-Gobain
Corporation, one of the top 100 industrial companies in the world and a leading
producer of construction products, flat glass, high-performance materials and
packaging. The Laboratory Division is a part of Saint-Gobain Performance Plastics Healthcare Markets group, and offers a comprehensive line of high-quality
laboratory products including fluoropolymer labware, laboratory tubing, singleuse products for fluid-transfer, cell culture and packaging products, and caps and
closures for various laboratory applications. All products are engineered to the
strictest standards for consistent, reliable performance in the most demanding
laboratory environments. For more information, visit http://www.LabPure.com.
About Saint-Gobain in North America
Saint-Gobain has its North American headquarters in Valley Forge, Pennsylvania. As the world leader in sustainable habitat, Saint-Gobain is committed to inventing solutions to help professionals and communities around the world build
and renovate comfortable, healthy, economical and energy-efficient buildings.
The company has more than 265 locations in North America and approximately
19,000 employees. In the United States and Canada, Saint-Gobain reported
sales of approximately $7.7 billion in 2011.
Distributors interested in learning more about products offered by the Laboratory
Division of Saint-Gobain Performance Plastics should contact:
Katia M. May
Laboratory Market Manager
© 2014 Messe Düsseldorf GmbH
632
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
mance Plastics. “We’re very proud to offer the first bio-based, non-phthalate
tubing solution to help manufacturers proactively advance both the food safety
and sustainability components of their operations without having to compromise
productivity – or their bottom line.”
Saint-Gobain Performance Plastics
814-308-4506
Katia.M.May@saint-gobain.com
09/11/2013
09/11/2013
Saint-Gobain Launches Phthalate-Free Tubing
Solution for Food and Beverage Processors
Saint-Gobain Launches Phthalate-Free Tubing Solution for Food and Beverage Processors
New Tygon S3™ Tubing Line Helps Manufacturers Advance Food Safety and
Sustainability without Sacrificing Performance
Akron, OHIO – October 29, 2012 – Saint-Gobain Performance Plastics (SGPPL)
announces Tygon S3™, a Safe, Smart and Sustainable product transfer solution
that is the first bio-based and phthalate-free tubing. Building upon the company’s
high-performance portfolio of product transfer technologies, Tygon S3™ represents the next generation of flexible tubing from Saint-Gobain and enables food
and beverage manufacturers to advance food safety and sustainability measures without sacrificing performance.
Phthalates are commonly used in the plastics industry as a plasticizer to increase
tubing’s flexibility, transparency, durability and longevity. However, with increasingly stringent legislation around the world, processors anticipate transitioning
to equipment that eliminates phthalates altogether.
Tygon S3 tubing complies with FDA, NSF and 3-A requirements for food & beverage applications as well as with Japan Food Sanitation Law # 370/1959. Additionally, Tygon S3 complies with European regulations (10/2011/EU) for many
food and beverage applications when used as instructed. Complete compliance
information and use instructions can be found at www.processsystems.saintgobain.com/tygons3-flexible-tubing.aspx.
As an alternative to phthalates, Tygon S3™ tubing uses a bio-based material
as a plasticizer, which provides exceptional durability and longevity compared to
other solutions on the market. Food and beverage processors can also leverage
the sustainability benefits of this material to reduce the carbon footprint of their
supply chains.
To help CPGs and other manufacturers enhance their food safety and sustainability measures, the bio-based solution will become available in Q1 of 2013.
“In today’s fast-paced media landscape, consumers are more engaged than ever
before with the food processing industry,” said Iuliana Nita, Global Marketing
Manager, Food & Beverage, Process Systems division at Saint-Gobain Perfor-
© 2014 Messe Düsseldorf GmbH
633
Saint-Gobain brings Tubing Solutions for
Ethanol-Enriched Fuel Applications to European
Market
Recent regulations set by the Environmental Protection Agency (EPA) aim to
encourage the use of ethanol-enriched fuel blends in the United States. European manufacturers of small-engine equipment that export to the U.S. will be
expected to comply without sacrificing performance in applications involving high
ethanol blend fuels. To help them navigate this regulatory landscape, the Fluid
Systems division of Saint-Gobain Performance Plastics (SGPPL) provides product transfer solutions that enable Original Equipment Manufacturers (OEM’s) to
ensure compliance and high-quality products.
In the U.S., the EPA has granted a waiver allowing the E15 fuel blend (15%
ethanol, 85% gasoline) to be sold at local gas stations. E15 fuel, although
environmentally-friendly, can degrade fuel lines because of the higher ethanol
content, resulting in higher permeation rates and an increased risk of fuel leaks.
This creates a challenge for OEMs using standard tubing solutions that may not
be able to handle such a caustic fuel blend.
Saint-Gobain’s portfolio of solutions for fuel applications include a range of lowpermeation Tygon® tubing that ensures optimum performance when used with
ethanol and nitrogen-enriched fuel blends. The Tygon® tubing features a multilayer design with an inner layer that is 100% compatible with ethanol. The line
of solutions also meets EPA regulations in addition to conforming to recent standards issued by California Air Resources Board (CARB).
Tygon® tubing for ethanol-enriched fuel applications also maintains the integrity
of small engine operations, preventing the downtime and costs associated with
multiple repairs and enhancing operational safety.
“With ethanol-enriched fuel continuing to be a hot topic around the world, the regulatory landscape could be subject to change, requiring more flexible solutions,”
said Lily Lei, Global Marketing Manager, Chemicals, Fluid Systems Division at
Saint-Gobain Performance Plastics. “Additionally, the manufacture and inventory management of multiple product varieties is more costly to OEMs. Both
factors make a good case for European companies to adopt technologies that
ensure compliance with the most stringent regulations now and future-proof their
stock for later, when change in their own backyard could be right around the corner.”
© 2014 Messe Düsseldorf GmbH
634
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
foams, coated fabrics, bearings, seals and fluid systems.
To learn more about Saint-Gobain’s tubing solutions for fuel applications please
contact:
Lily Lei, Global Marketing Manager, Chemicals, Fluid Systems Division
About Saint-Gobain in North America
Saint-Gobain Performance Plastics
+1 (908) 252-1648
Lily.Lei@saint-gobain.com
09/05/2013
For more information, visit www.saint-gobain.com, www.plastics.saint-gobain.com
and www.biopharm.saint-gobain.com.
Saint-Gobain Performance Plastics acquires Twin Bay
Medical
Saint-Gobain has its North American headquarters in Valley Forge, Pennsylvania. As the world leader in sustainable habitat, Saint-Gobain is committed to inventing solutions to help professionals and communities around the world build
and renovate comfortable, healthy, economical and energy-efficient buildings.
The company has more than 265 locations in North America and approximately
19,000 employees. In the United States and Canada, Saint-Gobain reported
sales of approximately $7.7 billion in 2011.
December 3, 2012
Rob Schwenker
Saint-Gobain Performance Plastics has completed the acquisition of Twin Bay
Medical, a Michigan based innovator and manufacturer of BarbLock® products
- flexible tube retainers - as well as single-use components for biopharmaceuticals manufacturing. This acquisition expands Saint-Gobain’s capabilities as a
full service provider for the biopharmaceutical industry. Twin-Bay Medical’s production facility located in Williamsburg, Michigan, its development organization,
and all of the employees currently working for the company are included in the
transaction.
Business Manager – Healthcare
”The acquisition of Twin-Bay Medical enables us to continue to bring innovative
solutions to the market, especially for single-use biopharmaceutical manufacturing for which Twin Bay Medical has consistently been developing new and
unique products to meet the challenges of this new industry. Twin Bay Medical
and Saint-Gobain share the same passion for customer service, with a strong
emphasis on quality and reliability. Thanks to Saint-Gobain’s global reach, combining the companies will allow us to partner with our global customers wherever they operate. We are also very pleased that Twin Bay Medical’s founder,
Al Werth, will continue to work with us and will keep bringing innovation within
the space of single-use biopharmaceutical manufacturing.” says Michael Cahill,
Vice President of Saint-Gobain Performance Plastics, Fluid Systems division.
About Saint-Gobain
Saint-Gobain, the world leader in the habitat and construction markets, designs,
manufactures and distributes building materials providing innovative solutions
to meet the challenges of growth, energy-saving and environmental protection.
With 2011 sales of $54 billion, Saint-Gobain operates in 64 countries and has
nearly 195,000 employees. World leader in high performance plastics, SaintGobain Performance Plastics is headquartered in Aurora, Ohio (USA). The company employs 4,500 employees in 16 countries. Its product offer includes films,
© 2014 Messe Düsseldorf GmbH
635
512-657-0234
Robert.D.Schwenker@saint-gobain.com
09/05/2013
New Tygon S3™ Line Enhances Laboratory Research,
Safety and Sustainability without Sacrificing
Performance
October 29, 2012
Saint-Gobain Performance Plastics (SGPPL) announces Tygon S3™, a Safe,
Smart and Sustainable liquid transfer solution that is the most advanced choice
for bio-based and phthalate-free tubing. Building upon the company,s highperformance portfolio of product transfer technologies, Tygon S3 represents the
next generation of flexible tubing from Saint-Gobain and enables laboratory researchers to enhance research and sustainability measures without sacrificing
performance.
Phthalates are commonly used in the plastics industry as a plasticizer to increase
tubing,s flexibility, transparency, durability and longevity. However, with increasingly stringent legislation around the world, processors anticipate transitioning
to equipment that eliminates phthalates altogether.
As an alternative to phthalates, Tygon S3 uses a bio-based material as a plasticizer, which provides exceptional durability and longevity compared to other
solutions on the market. Non-DEHP, phthalate-free options from Saint-Gobain
include Tygon S3 E-3603 for general laboratory use, Tygon S3 E-3603 for vacuum applications, and Tygon S3 E-LFL for use with peristaltic pumps. Both
Tygon S3 E-3603 and Tygon S3 E-LFL are also available as autoanalysis TAAT
© 2014 Messe Düsseldorf GmbH
636
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
tubing in 2- or 3-stop configurations.
09/05/2013
Non-DEHP, phthalate-free bio-based solutions will be available in the first quarter
of 2013.
”It is important to put health and safety first,” said Katia May, Marketing Manager
for the Laboratory Division at Saint-Gobain Performance Plastics. ”We,re very
proud to be a market leader in providing customers with bio-based, non-DEHP
and phthalate-free tubing solutions that enhance the safety and sustainability in
research without compromising quality or productivity.”
Tygon® E-1000, a soft and flexible non-DEHP tubing, is also available for laboratory set-ups and synthesis applications.
Manufacturers interested in learning more about Tygon S3 products can contact:
Katia May
Laboratory Market Manager
Saint-Gobain Performance Plastics
814-308-4506
Katia.M.May@saint-gobain.com
http://www.LabPure.com
About Saint-Gobain Performance Plastics
Saint-Gobain Performance Plastics (SGPPL) is a subsidiary of Saint-Gobain
Corporation, one of the top 100 industrial companies in the world and a leading
producer of construction products, flat glass, high-performance materials and
packaging. The Laboratory Division is a part of Saint-Gobain Performance Plastics Healthcare Markets group, and offers a comprehensive line of high-quality
laboratory products including fluoropolymer labware, laboratory tubing, singleuse products for fluid-transfer, cell culture and packaging products, and caps and
closures for various laboratory applications. All products are engineered to the
strictest standards for consistent, reliable performance in the most demanding
laboratory environments. For more information, visit http://www.LabPure.com.
About Saint-Gobain in North America
Saint-Gobain has its North American headquarters in Valley Forge, Pennsylvania. As the world leader in sustainable habitat, Saint-Gobain is committed to inventing solutions to help professionals and communities around the world build
and renovate comfortable, healthy, economical and energy-efficient buildings.
The company has more than 265 locations in North America and approximately
19,000 employees. In the United States and Canada, Saint-Gobain reported
sales of approximately $7.7 billion in 2011.
Saint-Gobain Performance Plastics acquires Applied
Bioprocess Containers
March 6, 2013
Saint-Gobain Performance Plastics has completed the acquisition of Applied
Bioprocess Containers, a U.S.-based supplier of single use containers and fluid
transfer systems for the biopharmaceutical industry.
Based in Plymouth, Minnesota, Applied Bioprocess Containers specializes in the
design and manufacture of single-use storage vessels designed for the preparation, collection, storage and transportation of biopharmaceutical liquids, as well
as single-use fluid transfer assemblies, including tubing and connectors. Applied Bioprocess Containers focuses on developing highly-customized solutions
to meet specific customer requirements.
”This acquisition is an excellent fit for Saint-Gobain Performance Plastics, since
both companies supply single-use systems to the biopharmaceutical market with
the same focus on design, service and customer needs. Applied Bioprocess
Containers brings us a strong expertise in design and manufacturing of bioprocess containers, while Saint-Gobain has a recognized leadership in fluid transfer
components, especially tubing and connectors. This now increases our ability
to serve customers globally with a more comprehensive product portfolio” says
Michael Cahill, Vice President of Saint-Gobain Performance Plastics, Fluid Systems division, into which the Applied Bioprocess Containers business will be
integrated.
About Saint-Gobain Performance Plastics
A world leader in high-performance plastics, Saint-Gobain Performance Plastics
is headquartered in Aurora, Ohio. The company employs nearly 5,200 employees in 16 countries. Its product offer includes films, foams, coated fabrics, bearings, seals and fluid systems. For more information, visit www.saint-gobain.com
and www.plastics.saint-gobain.com.
About Saint-Gobain in North America
Saint-Gobain, the world,s largest building materials company, has its North
American headquarters in Valley Forge, Pennsylvania. As the world leader in
sustainable habitat, Saint-Gobain is committed to inventing solutions to help professionals and communities around the world build and renovate comfortable,
healthy, economical and energy-efficient buildings. The company has more than
265 locations in North America and approximately 19,000 employees. In the
United States and Canada, Saint-Gobain reported sales of approximately $7.9
billion in 2012.
Bill Seiberlich
© 2014 Messe Düsseldorf GmbH
637
© 2014 Messe Düsseldorf GmbH
638
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Saint-Gobain Communications
of the surveyed exhibitors awarded the show high marks.
610-341-7187
As an industrial leader in designing and manufacturing custom seals and polymer components (with over five decades experience in materials and product
innovation), the Seals Group’s objectives in exhibiting at the K Show are to continue to cultivate their co-development relationships with their existing customer
base as well as meet new prospects who are looking to improve efficiency and
discover progressive technologies. Although there are many challenges facing
the European plastics industry today, the Seals Group remains optimistic for the
future due to its belief that the industry is in a constant process of technological evolution and their polymer solutions continue to be indispensable in most
areas of their customers’ daily lives. Advanced polymer solutions have become
increasingly common and their use has broadened into different markets, especially with sealing applications for many companies who are progressively active
in this field. The Seals Group’s distinctive edge is their very close partnership
with its customer base.
william.seiberlich@saint-gobain.com
10/07/2013
SAINT GOBAIN SEALS GROUP EXHIBITING AT K
SHOW TO SHOWCASE THEIR INNOVATIVE POLYMER
SOLUTIONS
From October 16 to 23, at the K Show in Düsseldorf, Germany, Saint-Gobain
Seals Group will be showcasing their wide range of polymer solutions, which includes their Meldin® and Rulon® product lines. Both have been globally used in
a variety of applications for many different markets, including wear and friction
components for the aerospace and automotive industry, sealing solutions for
the oil and gas industry, and structural equipment components for the electronics and industrial industries. Specific examples include Rulon® ball bearings on
the Mars Rover Curiosity, Meldin® 7000 bearing components on SpaceX Falcon
9 rocket (that was launched to the International Space Station) and Meldin® injection molded PEEK bearings in the world’s first full-powered, reusable, batteryoperated endoscopic surgical stapler.
The Meldin® product line consists of the most complete range of thermoset polyimide and engineered thermoplastic materials available on the market today.
These materials are available in compression or injection molded and machined
components as well as basic shapes for customization and design flexibility.
Among the different grades, Meldin® 7000 series is the Seals Group’s stateof-the-art polyimide product, developed for highly demanding wear, friction and
temperature applications such as thrust washers, sealing rings, and bearings.
The Meldin 7000 series materials are also well-suited for structural component
applications requiring extreme electrical or thermal insulation properties, high
purity, low outgassing, and outstanding chemical resistance. The Rulon® product line is a family of proprietary fluoropolymer compounds, mostly PTFE based
resins, engineered and developed for specific custom applications. This product
line includes a variety of high-performance bearings and components, primarily
used in mechanical, electrical and chemical applications, and withstands a variety of harsh environments such as extreme dryness, cryogenic temperatures,
water, steam and hydrocarbon fuel.
The Seals Group will be exhibiting in Hall 08A, Booth #H33, along with other
Saint-Gobain business units: Process Systems, Healthcare and Foams and
Tapes. The K Show is known to experts as a prime trade fair for plastics and
rubber worldwide and offers the biggest, broadest and most international range
of exhibits. The previous show, held in 2010, was attended by 220,000 trade
visitors and over 3,000 exhibitors from 56 countries participated, of which 93%
© 2014 Messe Düsseldorf GmbH
639
“Only by being closely connected with our customers, who are often market
leaders in their respective fields, we are able to first understand their primary
needs and then collaborate, engineer-to-engineer, to find long-term and efficient
solutions,” said Chiara Repetto, Meldin Product Manager for Europe. “We are
proud to consistently offer our customers not only materials and products that
are of the utmost quality but also support and testing and design experience.
No matter the problem, we are always able to custom design a viable solution,
using our many global resources such as our engineering and R&D team.”
Repetto added, “We have a strong local sales and technical presence that are
crucial links to our customers. Daily client contact along with knowledge and
expertise we have accumulated over many decades have helped us understand
emerging problems, which results in our manufacturing sites and R&D centers
solving ‘ad hoc’ and difficult challenges. ”
At the K Show, the Seals Group will not only connect with existing customers but
also support their German Meldin® 7000 distributor, BIEGLO (at Hall 08B, Booth
#E65 – www.bieglo.de), who provides solutions to material-related questions
with the most advanced polymer materials. Their partnership has broadened
the scope of customer service and availability for this product line in Europe.
09/05/2013
SAINT-GOBAIN PERFORMANCE PLASTICS NEW
CHROMATOGRAPHY ASSEMBLIES PROVIDE
CUSTOM-QUALITY SAMPLE PACKAGING AT AN
ECONOMICAL PRICE
Accurate Chromatography Sampling Starts with Quality Packaging
© 2014 Messe Düsseldorf GmbH
640
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
July 8, 2013
gobain.com and http://www.saint-gobain-northamerica.com.
Saint-Gobain Performance Plastics (SGPPL) introduces Chromatography Assemblies for GC and HPLC autosamplers. Each assembly includes a choice of
clear 2mL 33-Expansion (33E) or 51-Expansion (51E) borosilicate glass vials
plus cap and liner closures, manufactured exclusively to provide a perfect fit on
the vials. Closures are made from ultra-pure and chemically resistant materials
to reduce sample loss and provide maximum protection to samples.
Linda Potter
Vials come in three finishes to fit most autosamplers. Chemical-resistant 8/425
and 9mm polypropylene caps are available in 5 colors; 11mm aluminum crimp
style is also available. Platinum-cured silicone / PTFE liners come in 4 colors
for sample differentiation and are recommended for HPLC and GC applications.
Red butyl / PTFE liners are also available for GC and routine analysis. Customers can choose pre-slit or solid liners.
09/06/2013
“Unlike our competitors, Saint-Gobain produces PTFE film and oversees the
quality of each liner. Vials are made from quality German glass for excellent
chemical and temperature resistance,” said Katia May, Market Manager for the
Laboratory Division at Saint-Gobain Performance Plastics. “Researchers engaged in high-volume chromatography work will value quality sample protection
at low cost.”
Chromatography Assemblies are available with minimum order of one case
(1,000 assemblies) and can be purchased direct through Saint-Gobain Performance Plastics or through distributors. Product samples are also available.
Researchers can visit http://www.LabPure.com to view a chromatography vial/autosampler
compatibility table and learn more about Chromatography Assemblies from
Saint-Gobain. Distributors interested in learning more about products from
Saint-Gobain’s Laboratory Division should contact Katia M. May, Laboratory
Market Manager, at 814-308-4506, or Katia.M.May@saint-gobain.com.
About Saint-Gobain Performance Plastics
Saint-Gobain Performance Plastics, part of the Innovative Materials Sector of
Saint-Gobain, is headquartered in Aurora, Ohio, and employs 4,400 people in
15 countries. It is a world leader in high-performance plastics, including flexible
tubing applications, seals, coated fabrics, foams, polymer products and bearings.
About Saint-Gobain
Saint-Gobain, the world leader in the habitat and construction markets, designs,
manufactures and distributes building materials providing innovative solutions
to meet the challenges of growth, energy saving and environmental protection.
With 2012 sales of $55.5 billion, Saint-Gobain operates in 64 countries and
has nearly 195,000 employees. For more information, visit http://www.saint-
© 2014 Messe Düsseldorf GmbH
641
Marketing Coordinator - Saint-Gobain Performance Plastics
727-299-2565
linda.f.potter@saint-gobain.com
Saint-Gobain Seals Group’s Meldin® 7001 Thermoset
Material PassesUL 94 Flammability Tests
Saint-Gobain Seals Group’s Meldin® 7001 (unfilled polyimide) thermoset material, which is part of their Meldin® 7000 series product line, has passed the UL
94 flammability tests this year ((a regularly occurring distinction for many years).
UL 94 is a standard from Underwriters Laboratories, Inc. (UL), a global independent safety science company, which covers tests for flammability of plastic
materials for parts in devices and appliances testing. Vertical burning tests were
conducted on the Meldin® 7001 material to measure its flammability characteristics. This testing program determines the material’s tendency to extinguish or
spread the flame once the material is ignited.
UL 94 includes 12 flame classifications based on the results of small-scale flame
tests. The Meldin® 7001 grade is incorporated into the six classifications where
materials are commonly used in manufacturing enclosures, structural parts and
insulators and has been UL listed with a “Plastic Recognition Yellow Card” (5VA
and V-0). The UL Yellow Card denotes the material color and bears information
relative to specific polymeric materials which a company has submitted to UL to
be tested, and representative samples of the product have been evaluated by
UL and meet their published and nationally recognized standards for safety. The
listings (for plastic materials) are published in the ”UL Recognized Components
Directory,” Volume II, Section QMFZ2, under the heading “Plastics.”
UL testing is important and valuable to end users of the material so they can
determine the suitability of specific applications as well as save time and cost by
eliminating the need for additional testing. As part of the Seals Group’s annual
safety standards and material diligence testing, their Meldin® manufacturing site
in Bristol, Rhode Island, is audited by a UL representative followed by material
testing at their lab per UL 94 requirements. Their other grades, Meldin® 7021,
7022, and 7211 (filled polyimides), have also passed UL94 testing with V-0 and
5VA ratings. Aside from passing UL 94 tests, the Meldin® 7000 series have been
qualified for numerous industry-specific as well as customer-specific specifications. This product line has been known to consistently perform in challenging
applications ranging from aircraft and launch vehicle parts, automotive components to semiconductor equipment parts.
© 2014 Messe Düsseldorf GmbH
642
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
The Meldin® 7000 product line will be featured at the K Trade Fair 2013 (an
international plastics and rubber show) in Düsseldorf, Germany from October
16-23. The Seals Group will be exhibiting with other Saint-Gobain businesses:
Process Systems, Healthcare and Films, and also featuring Rulon®, their other
polymer product line.
For more information on the Seals Group’s Meldin® 7000 thermoset materials, their other polymer and sealing solutions or the K show, please visit
www.seals.saint-gobain.com or contact the Bristol, Rhode Island, site at 1-800223-4966.
09/05/2013
Saint-Gobain introduces Tygon S3™ non-DEHP,
phthalate-free tubing for laboratory applications
New formulations replace originals for enhanced end-user safety and regulatory compliance
Explore this site for further information on Saint-Gobain’s non-DEHP tubing for
laboratory or to request samples.
About Saint-Gobain
Saint-Gobain, the world leader in the habitat and construction markets and one
of the top 100 industrial companies in the world, designs, manufactures and
distributes building materials providing innovative solutions to meet the challenges of growth, energy saving and environmental protection. With 2012 sales
of $55.5 billion, Saint-Gobain operates in 64 countries and has nearly 195,000
employees. For more information, visit www.saint-gobain.com and www.saintgobain-northamerica.com.
Saint-Gobain’s Performance Plastics business is headquartered in Aurora, Ohio
and employs 4,400 people in 15 countries. It is a world leader in highperformance plastics, including flexible tubing applications, seals, coated fabrics, foams, polymer products and bearings.
Katia M. May
August 12, 2013
Market Manager, Saint-Gobain Performance Plastics
Saint-Gobain Performance Plastics, the maker of Tygon® high-performance
flexible tubing, has become the first manufacturer to introduce a bio-based,
phthalate-free product for use in laboratory applications. DEHP Di (2-ethylhexyl
phthalate), a common plasticizer, has been removed from existing Tygon® formulations.
814-308-4506
Next-generation Tygon S3™ tubing is DEHP- and phthalate-free. Made from
bio-based plasticizer, the product’s new sustainable formulations are biodegradable and deliver superior pump life than the original formulations. New Tygon
S3™ formulations include Tygon S3™ E-3603 General Laboratory Tubing and
Tygon S3™ E-LFL Long Flexible Life Tubing. Tygon® R-1000, has also been
replaced by Tygon® E-1000, a soft and flexible non-DEHP tubing.
”The change to non-DEHP tubing is integral to the company’s continued efforts
toward safety, compliance and sustainability,” says Katia May, Laboratory Market Manager for Saint-Gobain Performance Plastics. ”Saint-Gobain is the first
manufacturer to remove DEHP and phthalates from tubing products for laboratory applications and beyond. We are committed to providing superior, smart,
safe, and sustainable flexible tubing with unsurpassed performance.”
Saint-Gobain has also launched Tygon S3™ non-DEHP, phthalate-free microbore AutoAnalysis Tubing for precise dispensing and life-science applications.
Tygon S3™ formulations are compliant with global regulations and are manufactured in Saint-Gobain’s ISO certified facilities. Saint-Gobain supports existing
and new customers in their transition and validation requirements.
© 2014 Messe Düsseldorf GmbH
643
Katia.M.May@saint-gobain.com
09/05/2013
Saint-Gobain Performance Plastics acquires American
Fluoroseal Corporation
January 2, 2013
Saint-Gobain Performance Plastics has completed the acquisition of American
Fluoroseal Corporation (AFC), a Maryland based manufacturer of fluoropolymer
bags for medical use and sterile sampling systems for pharmaceutical manufacturing processes. The company operates from a single location in Gaithersburg
(Maryland, United States) where both engineering and manufacturing are located.
AFC is considered a pioneer in the design and use of fluorinated ethylene propylene bags and has been producing innovative solutions for over 20 years. The
company’s products include Vuelife® culture bags; KryoSure® cryopreservation
bags; and KryoVue® cryopreservation overwrap pouches.
”This acquisition of American Fluoroseal Corporation is complementary to the
Saint-Gobain Performance Plastics film production and single use systems for
biopharmaceutical manufacturing. AFC now expands our product offering into
the area of vessels or bags which are used in very specific cell culture applications. Thanks to Saint-Gobain’s global reach, combining the companies will al-
© 2014 Messe Düsseldorf GmbH
644
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
low us to partner with our global customers wherever they operate” says Michael
Cahill, Vice President of Saint-Gobain Performance Plastics, Fluid Systems division in which the AFC business will be integrated.
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.006
Plastics products and parts for electro-/household
appliance
02.03.007
Plastics products and parts for electrical engineering
02.03.010
Plastics products and parts for aviation
02.03.011
Plastics products and parts for mechanical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
02.04.003.02
Parts from engineering plastics
02.04.003.03
Parts from high performance thermoplastics
02.04.003.04
Parts from free flowing thermosets
02.05.006
Cointainers
02.05.011
Sealings/Sealrings
02.05.027
Rubber / plastics combinations
About Saint-Gobain
Saint-Gobain, the world leader in the habitat and construction markets, designs,
manufactures and distributes building materials providing innovative solutions
to meet the challenges of growth, energy-saving and environmental protection.
With 2011 sales of $54 billion, Saint-Gobain operates in 64 countries and has
nearly 195,000 employees. World leader in high performance plastics, SaintGobain Performance Plastics is headquartered in Aurora, Ohio (USA). The company employs 4,500 employees in 16 countries. Its product offer includes films,
foams, coated fabrics, bearings, seals and fluid systems.
For more information, visit www.saint-gobain.com, www.plastics.saint-gobain.com
and www.biopharm.saint-gobain.com.
About Saint-Gobain in North America
Saint-Gobain has its North American headquarters in Valley Forge, Pennsylvania. As the world leader in sustainable habitat, Saint-Gobain is committed to inventing solutions to help professionals and communities around the world build
and renovate comfortable, healthy, economical and energy-efficient buildings.
The company has more than 265 locations in North America and approximately
19,000 employees. In the United States and Canada, Saint-Gobain reported
sales of approximately $7.7 billion in 2011.
Rob Schwenker
Business Manager – Healthcare
512-657-0234
Robert.D.Schwenker@saint-gobain.com
Product Overview
SAINT-GOBAIN PPL FRANCE
02.01.002
Products made by extrusion
02.01.005
Parts made by laminating
02.01.007
Parts made by compression moulding
02.01.010
Parts made by injection moulding
© 2014 Messe Düsseldorf GmbH
645
© 2014 Messe Düsseldorf GmbH
646
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.01.002
SAINT-GOBAIN PPL FRANCE
Meldin HT
Products made by extrusion
Rulon
Rulon
02.01.005
Parts made by laminating
Marathon
02.01.010
Parts made by injection moulding
Meldin 7000
02.01.007
Parts made by compression moulding
Meldin 7000
02.03.002
Plastics products and parts for automotive
Meldin 7000
Meldin HT
© 2014 Messe Düsseldorf GmbH
647
© 2014 Messe Düsseldorf GmbH
648
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Meldin HT
Rulon
Rulon
02.03.006
Plastics products and parts for electro-/household appliance
Meldin 7000
02.03.003
Plastics products and parts for building applications
Meldin 7000
Meldin HT
Meldin HT
Rulon
© 2014 Messe Düsseldorf GmbH
649
© 2014 Messe Düsseldorf GmbH
650
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.007
Plastics products and parts for electrical engineering
Meldin HT
Meldin 7000
Rulon
Meldin HT
02.03.011
Rulon
02.03.010
Plastics products and parts for mechanical engineering
Meldin 7000
Meldin HT
Plastics products and parts for aviation
Meldin 7000
© 2014 Messe Düsseldorf GmbH
651
© 2014 Messe Düsseldorf GmbH
652
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Rulon
02.03.014
Meldin HT
Plastics products and parts for food processing industry
Rulon
Meldin 7000
Meldin HT
02.04.001.09
Semi finished products of polytetrafluorethylene
(PTFE)
Rulon
Rulon
02.04.003.02
02.03.015
Plastics products and parts for transport/packaging
Parts from engineering plastics
Meldin HT
Meldin 7000
© 2014 Messe Düsseldorf GmbH
653
© 2014 Messe Düsseldorf GmbH
654
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Rulon
02.04.003.03
Meldin HT
Parts from high performance thermoplastics
02.05.006
Meldin 7000
Fluoroloy
Meldin HT
Rulon
02.04.003.04
Parts from free flowing thermosets
02.05.011
Meldin 7000
© 2014 Messe Düsseldorf GmbH
Cointainers
Sealings/Sealrings
Meldin 7000
655
© 2014 Messe Düsseldorf GmbH
656
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Meldin HT
Product Overview
Sangir Plastics P. Ltd
02.03.001
Plastics products and parts for plant building
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.003.02
Parts from engineering plastics
02.05.067
Tanks
03.05.001
Hot-plate welding machines
03.05.007
Extrusion welding machines
Rulon
Sangir Plastics P. Ltd
Product Details
Address
Phone
Sangir House, 366/2933, Motilal Ngr.
400 062 Mumbai
India
02.03.001
Sangir Plastics P. Ltd
Plastics products and parts for plant building
POLYETHYLENE (PE)
+91 22 28717800
Fax
+91 22 28741794
Internet address
www.sangir.com
E-Mail
k2013@sangir.com
Stand
Hall 05, B03-3 (Page 874)
© 2014 Messe Düsseldorf GmbH
Polyethylene is a thermoplastic polymer consisting of
long chains produced by combining the ingredient monomer
ethylene. The ethylene actually converts to ethane as it
takes its place in a polymer and straight sections of the
polymer are the same structure as the simple chain hydrocarbons, e.g., propane, decane and other straight singlebonded carbon chains. As with any polymer, the structure of the resulting substance defies molecular description due to cross branching of the chains.
HDPE (High Density polyethylene) is defined by a density of greater or equal to
0.941 g/cm3. HDPE has a low degree of branching and stronger intermolecular
forces and tensile strength.
657
© 2014 Messe Düsseldorf GmbH
658
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.05
NovaRex PVC Rigid Sheets
Semi finished products of polyethylene (PE)
PE Piping Systems
NovaRex PVC C-PVC Sheets are made from PVC, the
most widely used member of the vinyl family. They
can resist mineral acids, alkalis, plating solutions, paper making chemicals and other inorganic solutions and
fumes. They also resist alcohols, glycols, aliphatic hydrocarbons, amines and phenols offering excellent corrosion
and weather resistance. It has a high strength-to-weight
ratio and is a good electrical and thermal insulator. PVC
is also self-extinguishing per UL flammability tests. PVC may be used to temperatures of 140°F (60°C). They are available in Flexible Transperant type also.
PE PIPES AND FITTINGS IN PE 100 - PE 80 PE 63
MDPE PIPES AND FITTINGS
SWEEP BENDS
PE SHEETS PLATTEN BLOCKS
PE SHEETS in 1500mm WIDE - PE 100 GRADE AVAILABLE
PE BLOCKS upto 20 mm thick - 1000mm x 2000mm
PE T RIBBED PROFILE SHEETS FOR CONCRETE EMBEDDING
02.04.001.07
02.04.003.02
Semi finished products of polypropylene (PP)
Parts from engineering plastics
PVDF PIPING SYSTEMS
POLYPROPYLENE (PP)
PVDF PIPES AND FITTINGS FOR HIGH TEMPERATURE SERVICE.
Polypropylene (PP) is a thermoplastic from the polyolefin
group. It is a semi-rigid, translucent polymer with good
toughness and weather resistance properties, low water
absorption and is easily moulded to desired shapes. PP
is a largely non-polar, partially crystalline thermoplastic
with a crystallinity of 60 to 70% and a density of 0.90 to 3
0.91 g/cm which is amongst the lowest for all plastics. It
is generally available in three advanced forms:
SIZE AVAILABLE UP TO 200 mm. SOCKET FUSION FITTINGS AVAILABLE.
PIPES MADE TO ISO 10931 AND ASTM SCH 40/ SCH 80 Standards
MOULDED FITTINGS MADE TO DIN 16962 STADNARD
Sekisui Chemical GmbH
PP-Homopolymer (PP-H): Produced by a continous chain of polypropylene units
which results in a high stiffness material. Advanced homopolymer types like beta
nucleated PP, are used to make piping systems and sheets.
PP-Copolymer (PP-C): Produced by adding 4-15% ethylene to the polypropylene gives much improved impact strength and considerably lowers the brittle
point to below normal service temperatures i.e. -15°C to -20°C.
PP Random Copolymer (PP-R): Random copolymer polypropylene is a clear,
semi-crystalline polymer which exhibits high stiffness, better impact strength and
good electrical insulation properties.
Other options in PP include fire retardant and electro-conductive grades. PP
can also be UV stabilized.
02.04.001.11
Address
Cantadorstr. 3
40211 Düsseldorf
Germany
Phone
+49 211 36977-0
Fax
+49 211 36977-31
Internet address
www.sekisui.de
E-Mail
info@sekisui.de
Stand
Hall 08b, A48 (Page 890)
Semi finished products of polyvinylchloride (PVC)
© 2014 Messe Düsseldorf GmbH
659
© 2014 Messe Düsseldorf GmbH
660
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Overview
01.01.023
Electrically conductive plastics
01.01.101
Polyvinyl acetal (PVAL)
01.01.108
Polyvinyl chloride chlorinated (PVC-C)
01.03.015
High performance composite materials as
semi-finished ware,adhesive films, primer
01.08.002
02.03.003
Plastics products and parts for building applications
02.03.005
Plastics products and parts for household/consumer
02.03.007
Plastics products and parts for electrical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.015
Plastics products and parts for transport/packaging
02.04.001.04
Semi finished products of polycarbonate (PC)
02.04.001.06
Semi finished products of polymethylmethacrylate
(PMMA)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
Sekisui Chemical GmbH
Binders
01.08.012
Solvent-based adhesives
01.08.017
Hot melt adhesives
01.09.027
Polyvinyl butyrals
01.10.002
Additives, other
02.04.002
Films
01.10.014
Antiblocking agents
02.05.012
Torsion vibration damper / Vibration damper / -isolation
01.10.028
Fire protection agents
02.05.014
Electrical equipements-parts
01.10.100
Foaming agents
02.05.024
Glass-fibre reinforced plastic parts (GRP)
01.11.024
Microbeads rigid and hollow
02.05.030
Laminated fabric and laminated paper
01.12.014
Microbeads (glass, silicate, hollow and rigid)
02.05.068
Technical films
02.01.010
Parts made by injection moulding
02.05.072
Ventilator parts
02.03.002
Plastics products and parts for automotive
02.05.073
Valves
© 2014 Messe Düsseldorf GmbH
661
© 2014 Messe Düsseldorf GmbH
662
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
02.04.001.06
Sekisui Chemical GmbH
Semi finished products of polymethylmethacrylate
(PMMA)
ESLON-DC ESD PMMA
Calmmoon technology
The secret of Calmmoon lies in the specially developed synthetic resin layer,
which perfectly converts vibration into thermal energy, thanks to its unique molecular structure.
How it works
The range of applications of ESLON-DC sheets varies
from the electronics industry, automation technology,
clean room technology to machine and plant construction. Due to their high transparency, our materials are
particularly suited for machine enclosures, protective covers, partitions, laminar
flow units, clean room storage systems and numerous additional applications.
Due to the electrostatic conductivity of ESLON-DC, even highly sensitive components are protected from uncontrolled electrostatic discharges, which may occur
when non-conductive plastic materials are used. For shielding light-sensitive
production processes (i.e. UV-exposure, laser beams), our product range includes a number of tinted colour variations.
02.05.012
CALMMOON
Torsion vibration damper / Vibration damper / -isolation
CALMMOON
Calmmoon achieves excellent noise suppression because of its very high energy
conversion rate.
1.3 mm foil thickness
Calmmoon self-adhesive noise suppression sheeting was developed in 2002,
its minimal thickness of only 1.3 mm and its weight of only about 38 kg/m2 being
its major virtues.
CALMMOON
Technologie Calmmoon
Technologie Calmmoon
Das Geheimnis von Calmmoon liegt in der speziell entwickelten Kunstharzschicht,
welche durch ihre einzigartige molekulare Struktur Vibration perfekt in Wärmeenergie umwandelt.
Wirkungsweise
Le secret de Calmmoon réside dans la couche de résine synthétique spéciale
qui transforme de façon parfaite les vibrations en énergie thermique grâce à sa
structure moléculaire unique.
Mode d’action
Calmmoon-Lärmdämpfungsfolie besteht aus einer geräuschdämpfenden Kunstharzschicht und einem Trägerelement aus Metall.
Durch die Installation von Calmmoon direkt an der Geräusch- bzw. Vibrationsquelle
wird deren Schwingungsenergie unmittelbar an die innenliegende Kunstharzschicht
weitergeleitet und in dieser wesentlich durch die Oszillation der Molekularstruktur des Kunstharzes absorbiert. Die dabei entstehenden Molekularströmungen
erzeugen Wärmeenergie bei gleichzeitiger Schall- und Vibrationsdämpfung.
Die sehr hohe Energieumwandlungsrate von Calmmoon ermöglicht demzufolge
eine exzellente Lärmdämpfungsleistung.
1,3 mm Folienstärke
La feuille d’isolation phonique Calmmoon est constituée d’une couche de résine
synthétique insonorisante et d’un support en métal.
Calmmoon était installé directement sur la source de bruit et de vibrations, l’énergie
vibratoire est transmise immédiatement à la couche de résine synthétique située
à l’intérieur qui en absorbe l’essentiel grâce à l’oscillation de sa structure moléculaire. Les courants moléculaires qui se créent alors génèrent de l’énergie thermique tout en amortissant le bruit et les vibrations.
Grâce à son taux élevé de conversion énergétique, Calmmoon est un excellent
isolant phonique.
Film de 1,3 mm d’épaisseur
Die selbstklebende Lärmdämpfungsfolie Calmmoon wurde im Jahre 2002 entwickelt und überzeugt durch eine sehr geringe Folienstärke von 1,3 mm und
einem Flächengewicht von nur ca. 3,8 kg/m2.
© 2014 Messe Düsseldorf GmbH
Calmmoon noise suppression sheeting consists of a noise suppressing synthetic
resin layer and a support layer of metal. By installing Calmmoon right at the
source of noise or vibration, the energy emitted is transmitted straight to the
inner synthetic resin layer, where it is substantially absorbed by the oscillation
of the resin molecular structure. The ensuing molecular movements produce
thermal energy while at the same time attenuating noise and vibration.
663
Le film d’isolation phonique autocollant Calmmoon a été mis au point en 2002
© 2014 Messe Düsseldorf GmbH
664
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
et convainc par sa très faible épaisseur, 1,3 mm seulement, et une masse au
mètre carré de seulement 3,8 kg/m².
Sekisui Plastics Co., Ltd.
Address
2-7-1 Nishi-shinjuku, Shinjuku-ku
163-0727 Tokyo
Japan
Секрет Calmmoon заключается в специально изобретенном слое искусственной
смолы, который в результате удивительной молекулярной структуры превращает
вибрации в тепловую энергию.
Phone
+81 3 33479628
Воздействие
Fax
+81 3 33446396
Calmmoon – шумоизолирующая пленка состоит из шумопоглощающего слоя
искусственной смолы и несущего элемента из многослойного металла.
Internet address
www.sekisuiplastics.co.jp
E-Mail
m01271@sekisuiplastics.co.jp
Stand
Hall 08b, E76 (Page 890)
CALMMOON
Технология Calmmoon
В результате установки Calmmoon непосредственно на источник шума и
вибраций, будет энергия качения перенесена на внутри располагающийся
слой из искусственной смолы, и в нем через остиляцию молекулярной структурой
поглощается.
В это время возникшие молекулярные потоки производят тепловую энергию
при одновременном поглощении излучения и вибраций.
Очень высокий уровень энергетической трансформации Calmmoon делает
возможным отличное шумоизолирующее действие.
Product Overview
02.05.056
Sekisui Plastics Co., Ltd.
Foam products
1,3 мм толщина пленки
Самоклеющаяся шумоизолирующая пленка в 2002 году была изобретена
и восхищает своей очень низкой толщиной 1,3 мм и массой только в 3,8
кг/м².
02.05.073
Valves
Product Details
02.05.056
Sekisui Plastics Co., Ltd.
Foam products
Piocelan distribution container for flat-panel television
co
MEFCO & ESLON
ESLON MANUAL VALVE
Distribution container for glass and panel for LCD/PDP television sets
This is a valve product that enables manual setting of the
loaded volumes and flow volumes of chemicals that flow
through plant pipes. This plastic product is highly corrosionresistant and even acid and alkali chemicals will not cause
decay or leakage.
This material protects LCD and PDP components with its superior shock-absorption performance and all-dimension stability.
Due to its excellent shock-absorbing performance and alldimension stability, the use of Piocelan has expanded to distribution of largesized digital consumer electronics products.
Distribution container for large-sized flat television panels
This container is suitable for transportation of LCD and PDP panels. It can hold
© 2014 Messe Düsseldorf GmbH
665
© 2014 Messe Düsseldorf GmbH
666
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
up to 20 to 50 panels at a time. The returnable container’s measurement precision is high, and it is light-weight.
Distribution container for large-sized glass
This container is suitable for transportation of PDP glass, color filters, and
cells. Using Piocelan’s superior features, it can be formed up to the size of
2,360mm×1,050mm×H2,100mm. The container’s measurement precision is
high, and its compression and bending strengths are also high.
Seat core material
Insert forming with urethane foam is possible.
Seat core material
By using the material as rear seat cushion, metal wire
parts are drastically reduced, resulting in light weight of
seats. At the same time, with its excellent impact absorption performance, the
seat core material contributes to the protection of drivers and passengers by
preventing the sinking of seats at the time of impact.
Sekisui Plastics Europe B.V.
Address
Bedrijvenpark Twente 449
7602 KM Almelo
Netherlands
Phone
+31 546 473976
Fax
+31 546 473970
Internet address
www.sekisuiplastics.com
E-Mail
speu_info@sekisuiplastics.com
Stand
Hall 08b, E76 (Page 890)
Company News
Sekisui Plastics Europe B.V.
Techpolymer (optical use)
07/12/2013
To provide acrylic, PET, and polycarbonate resins with
the property of diffusing light
Development Background Fluorescent lamps were used
as conventional light sources, but they have been increasingly replaced by LEDs in recent years. As a result, our living environment now contains strong light in
the wavelength range 380–500 nm [Figure 1]. Light in
this range is blue, visible light, and as its wavelengths are short, it has a high energy level. There are concerns that looking at blue light for extended times may
cause retina damage, eyestrain, deterioration of eyesight, age-related macular
degeneration, sleeping disorders, and various other adverse effects.
Techpolymer is a light diffusion agent which provides
superior light transmittance and diffusion performance.
Sekisui’s Techpolymer is an indispensable part of the
LCD for personal computers and televisions. The uniform light diffusion effect
from the spherical particles helps make the entire display brighter and easier to
see. It is also used as LED light cover’s light diffusion material. It can be used in
the fields that require high optical performance by reducing all light transmittance
with haze-boosting effects. Upon customer request, we are developing varieties
with improved optical performance and solvent resistance.
Specific applications
Techpolymer is used as a light diffusing material to scatter transmitted light and
reduce reflected light, being added to transparent resins such as acrylic resin
and polycarbonate resin, and also being coated on the surface of transparent
films such as PET film. Compared to generally-used, non-organic titanium oxide,
barium sulfate, and others, Techpolymer boasts higher light transmission and
lower loss of all light transmittance, as well as the haze-boosting effects.
© 2014 Messe Düsseldorf GmbH
667
New Techpolymer Particles (Blue Light Cut Particles)
To deal with these issues, Sekisui developed new particles which filter out the
blue light emitted by LEDs.
Features Conventional products were mainly films that used simple pigments.
Sekisui Plastics has now successfully developed pigment-containing particles.
These particles have the following features: 1. This new type of particle can filter
out blue light, while maintaining Techpolymer’s light diffusion properties. 2. By
using these particles, the percentage of blue light filtered out can be arbitrarily
controlled, up to a maximum of 60%. 3. This technology can be applied to the
manufacturing of particles containing additives other than pigments.
© 2014 Messe Düsseldorf GmbH
668
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Blue Light Cut Particles can be coated onto films to arbitrarily control the percentage of blue light filtered out.
stand temperatures as high as 110degrees. Minimal shrinkage due to age or
heat provides excellent dimensional stability.
Particle size distribution can be adjusted depending on your application.
� PPO® is a registered trademark of General Electric Company.
Future Development In the future, Sekisui Plastics will develop applications such
as surface protection films for smartphones, tablets, laptops and other products
with LED displays and lighting.
02.05.056
Foam products
Piocelan distribution container
for more information visit us at http://www.tech-p.com/en/products/customize.html
Piocelan distribution container for flat-panel television components
Product Overview
Sekisui Plastics Europe B.V.
Distribution container for glass and panel for LCD/PDP television sets
01.04.008
Polyethylene foams (PE)
01.04.017
Polystyrene foams
01.09.015
Paint auxiliairies
Due to its excellent shock-absorbing performance and all-dimension stability,
the use of Piocelan has expanded to distribution of large-sized digital consumer
electronics products.
01.10.075
Matting agent
Distribution container for large-sized flat television panels
01.11.024
Microbeads rigid and hollow
This container is suitable for transportation of LCD and PDP panels. It can hold
up to 20 to 50 panels at a time. The returnable container’s measurement precision is high, and it is light-weight.
02.03.002
Plastics products and parts for automotive
Distribution container for large-sized glass
02.05.056
Foam products
Product Details
02.03.002
This material protects LCD and PDP components with its superior shock-absorption performance and all-dimension stability.
Sekisui Plastics Europe B.V.
PIOCELAN polyolefin hybrid foams
Plastics products and parts for automotive
Piocelan® lightweight, energy absorbing polyolefin hybrid foams for automotive components and returnable & KD packaging applications. This includes
a design service to maximize packing density, reduce logistics costs, improve
handling and protect parts.
Heatcell Core (Automobile Headliner Material)
Foam of modified polyphenylene oxide (PPO®)
This is a raw material for automobile parts that require
heat resistance and dimensional stability.
Heatcell is used as a material for automobile interiors
and as a headliner material. It is a foam of modified polyphenylene oxide
(PPO®), an engineering plastic. It has excellent heat resistance and can with-
© 2014 Messe Düsseldorf GmbH
This container is suitable for transportation of PDP glass, color filters, and
cells. Using Piocelan’s superior features, it can be formed up to the size of
2,360mm×1,050mm×H2,100mm. The container’s measurement precision is
high, and its compression and bending strengths are also high.
669
Piocelan is used in many automotive applications including energy absorbing
bumpers and tibia pads, floor fillers, tool boxes and tire spacers. Piocelan is
also used for returnable packaging [Ladungsträger/ Ladungstraeger] to protect
automotive and other components against damage.
Piocelan is used by all Japanese OEMs.
© 2014 Messe Düsseldorf GmbH
670
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Piocelan is a hybrid moldable foam resin with a polystyrene-rich core and polyolefinrich skin. This gives it excellent energy absorption and resistance to cracking
and squeaking. Piocelan meets FMVSS 302 and resists many chemicals which
attack polystyrene.
Product Details
Sekisui Plastics is experienced in design solutions in Piocelan and EPS for returnable and KD packaging applications. Benefits include lower warranty costs,
lower shipping costs and faster/easier handling by workers.
Biodegradable Starch Resin (BSR 06)
For more Piocelan information, visit http://www.piocelan.com/index.html.en.
Shanghai Disoxidation Macromolecule Materials Co. Ltd.
Address
Suite 1001, No. 258, Wu-Song Road,
200080 Shanghai
China, People’s Republic of
Phone
+86 21 31330508
Fax
+86 21 31330509
Internet address
www.dmmsh.com
E-Mail
sissi@dmmsh.com
Stand
Hall 07.1, E03-25 (Page 886)
Product Overview
02.03.005
Shanghai Disoxidation Macromolecule Materials Co....
Plastics products and parts for household/consumer
Having the same technical and mechanical properties
as conventional Polyethlene, BSR-06 is our bio-based
product engineered for blown film applications. BSR06 has been developed as a hybrid resin with use of
raw materals from agricultural resources and Polyethylene. With the same elongation and tensile strength of
Polyethylene. BSR-06 compliance with ISO14855 standards which with good
biodegradability.
Biodegradable Starch Resin (BSR 09)
Biodegradable Starch Resin (BSR) is yellowish to white
translucent particles. With main ingredients of starch,
glycerin and sorbitol, all the components meet the world
health organization’s standard. Its mechanical property
is similar to that of non degradable resins. For production, it doesn’t require special machine. The production process is as simple as
non-biodegradable plastics, and it can be easily molded.
Shanghai Disoxidation Macromolecule Materials Co....
01.01.010.04
Bioplastics, compostable
01.10.047
Masterbatches
02.01.001
Parts made by blow moulding
02.03.005
Plastics products and parts for household/consumer
02.03.009
Plastics products and parts for agriculture
© 2014 Messe Düsseldorf GmbH
671
© 2014 Messe Düsseldorf GmbH
672
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Sheela Foam Pvt Ltd
Address
Phone
Product Overview
37/2, Site IV, Sahibabad Industrial
201 010 Uttar Pradesh
India
+91 120 4162200
Fax
+91 120 4162282
Internet address
www.sheelafoam.com
E-Mail
rajeev.nayyer@sheelafoam.com
Stand
Hall 07.2, A01 (Page 888)
Company News
09/27/2013
Sheela Foam Pvt Ltd
01.04.003
Basic products PU
02.05.056
Foam products
Product Details
02.05.056
Sheela Foam Pvt Ltd
Foam products
Flexible Polyurethane Foam
We are the largest manufacturer of Flexible Polyurethane Foam in India more
than 40 years. We are a USD250 million group and rank among the top 5 PU
Foam manufacturing companies in Asia-Pacific region. And supplying/servicing
our products to satisfied customers in more than 32 countries world wide.
We have production manufacturing capacity more than 60,000MT PU Foam per
annum and having 1500 employees across the 15 Factories/Branches in India.
Sheela Foam Pvt Ltd
Flexible Impregnated Foam with Aluminum Adhesive
coating Closure Based
We have recently introduced a new product popularly known as
Flexible Impregnated Foam with Aluminum Adhesive coating (Closure Based).
We have world’s best high pressure Hennecke Foaming Plant and State-of-theart world best machines in all the plant in India. The PU Foam is available in
various densities, colour, length and width.
Sheela Groups manufacturing facility manufactures products like Polyester/Polyether
based Foam, Reticulated Foam, UV & TF Foam, Flame Retardant Foam(BS5852,
FMSS302, UL94, CA117 etc.) Memory (Visco Elastic) Foam etc.
For more information about us, please visit our website www.sheelafoam.com &
www.pufoammanufacturers.com
This product provide seal aganist dust,vermin,moisture,vibration
and air. It is availiable in various range of sizes,profiles,seal joint
tolerate large movement and remain permanently flexible.
Further, we are pleased to inform you that we are participating in one of the
largest and prestigious International Trade Fair K 2013, held on October 16-23,
2013 in Dusseldorf Germany. This is No.1 exhibition for Plastic and Rubber
worldwide.
Applications:
Automotive Acoustics Acoustic Block all weather sound panel Machinery and Equipment enclosures Compressor,Generator set enclosure/Canopy
Car,Boat,Truck,Bus Engine Compartment,Firewalls and Bonnets. Air conditioning units & systems Hydraulic Pump Compressor/ Enclosures
Please visit us at : Hall No. 7 Level 2 and Stand No# A01
In this exhibition we are displaying our all technical and comfort products segment along with some new innovative products.
The main characterstics of the product are as follows.
Tougher than similar products Totally Impermeable Oil and Grease resistant
Long Service Life Easy to cut Tear and Puncture resistance
© 2014 Messe Düsseldorf GmbH
673
© 2014 Messe Düsseldorf GmbH
674
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Product Details
Silex GmbH
02.01.002
Address
Werderstr. 53
44628 Herne
Germany
Phone
+49 2323 98644-0
Fax
+49 2323 98644-56
Internet address
www.silex-silikon.de
E-Mail
verkauf@silex-silikon.de
Stand
Hall 07a, C11 (Page 880)
Product Overview
Products made by extrusion
02.04.001.12
Semi finished products of rubber
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
02.05.056
Foam products
02.05.058
Hoses
Products made by extrusion
Silicone Profiles / Gaskets by Silex
The Production of customer ”tailor made” profiles from HCR
Silicone rubber is a specialty from Silex.Besides the ”classical”
square and round profiles our advanced technology enables
us to offer our customers also complex and sophisticated profiles for specific applications.
The extrusion of our profiles is based on our own developed
compounds, taking into consideration the Chemical and Physical properties which are needed to accomplish almost every requirement for
sealing applications.
Silex GmbH
02.01.002
Silex GmbH
Furthermore Silex produce also profiles / gaskets made of 2 different rubbers,
so-called ”co-extruded profiles”. Those products comply with the constant increasing of requirements coming from new complex engineering. In general
co-extruded profiles are made of 2 colours or 2 different products. The combination of solid / sponge and electrically isolating / conductive is also possible.
02.04.001.12
Semi finished products of rubber
HCR Silicone rubber composition
HCR (Heat Cured Rubber) is a specialty synthetic elastomer
which provides a unique balance of chemical and mechanical properties required by many of today’s more demanding
industrial applications. From it’s original development in the
1940’s using a laboratory process to it’s final commercial form
today, HCR Silicone rubber gives exceptional performance in
many different application areas.
02.05.058
Hoses
Silicone Tubes by Silex
02.05.060
Silex is producing tubes made out of silicone rubber in many
variations. Be it translucent, coloured or with special properties like heat resistance up to 300 °C., flame retardant according to several norms and compliant with food and technical
medical regulations.
Cords
© 2014 Messe Düsseldorf GmbH
675
© 2014 Messe Düsseldorf GmbH
676
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
playing minimal material shrinkage during cool-down, they also offer the advantage of high dimensional stability with uniform wall thickness distribution. In
combination, this ensures the very best in fit together with superior adhesive
properties and soft-touch comfort. With properties in- cluding biocompatibility in
accordance with DIN EN ISO 10993-5/-10 and resistance to sweat, cosmetics,
skin creams and disinfectants, they offer excellent safety and extreme durability.
SIMONA AG
Address
Teichweg 16
55606 Kirn
Germany
Phone
+49 6752 14-0
Fax
+49 6752 14-211
Internet address
www.simona.de
E-Mail
mail@simona.de
- SIMONA® Pipes with Functional Layers – High abrasion resistance and longer service life
Stand
Hall 08a, F32 (Page 894)
- SIMONA® Liner Piping Systems – Range of pipes and fittings for superior
safety in industrial applications
The new SIMONA® SIMOLIFE EVA flyer provides a summary of the vari- ous
product properties, product range and material specifications. The flyer can be
downloaded or ordered at www.simona.de/simolife.
09/09/2013
Company News
07/03/2013
SIMONA AG
- SIMONA® SIMOFUSE® – Joining technology with certified internal pressure
resistance
- SIMONA® Eco-Ice® – Low-friction plastic sheets for ice rinks
SIMONA® SIMOLIFE – Extensive product range for
orthopaedic solutions
Kirn, 20/08/2013. As one of the leading manufacturers of thermoplatics, SIMONA AG has chosen the motto ”Discover Future Solutions” to present itself as
an innovative supplier of polymer solutions at this year’s K 2013 trade fair. Having expanded its product development capabilities, the company will be showcasing a number of innovations and previously unseen products. Focusing on
safety, efficiency and sustainability, SIMONA will be presenting new ideas and
outlining its expertise as a development partner for highly sophisticated projects.
The extensive range of products, materials and processing methods can be explored by means of interactive media.
EVA added to semi-finished parts portfolio
Kirn, April 2013. The newly developed SIMONA®
SIMOLIFE line is an extensive product range specially
tailored to the requirements of the or- thopaedics technology sector. The group of semi-finished parts featuring the materials PE, PP and PETG has now been
extended to include sheets engineered from ethylenevinyl acetate (EVA).
Among the premieres at K 2013 will be:
SIMONA® SIMOLIFE EVA has been specially designed for the manufac- ture
of inner sheaths used in arm and leg prosthetics. The two product types EVA
flex and EVA superflex are designed to meet a wide range of requirements with
regard to flexibility of the specific material. The ex- truded sheets, available in
a natural and skin-tone colour, are supplied in the formats 400 x 400 mm and
2000 x 1000 mm, with thicknesses rang- ing from 3 to 15 mm. Customised sizes
and sheets with antibacterial properties are available on request.
SIMONA® SIMOLIFE EVA Sheets have excellent hot-forming properties. Dis-
© 2014 Messe Düsseldorf GmbH
Discover Future Solutions – SIMONA to unveil
numerous innovations and product concepts at K 2013
677
SIMONA® Pipes with Functional Layers
The strain exerted on the interior surfaces of a plastic pipe by abrasion and
impact can be considerable, e.g. during the hydraulic transport of solid materials such as sand, gravel or loose rocks. Coextruded SIMONA® PE 100 Pipes
feature integral or additional interior skins made of high-molecular-weight PE
or modified polyolefins. Boasting high abrasion resistance, they are capable of
withstanding extreme mechanical loads. Owing to their improved properties, SIMONA® Multilayer Pipes have opened up entirely new fields of application. In
Norway, for example, they have replaced steel pipes previously used for trans-
© 2014 Messe Düsseldorf GmbH
678
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
portation purposes on trawlers in the fishing industry. Not only do plastic pipes
– featuring smooth and durable interior surfaces –prevent damage to the catch,
they also have a longer service life thanks to their high level of corrosion resistance.
SIMONA® Liner Piping Systems
SIMONA AG has added to its range of products by introducing laminated liner
piping systems that are designed in particular to meet exacting safety standards
in industrial applications. A new manufacturing method applied to adhesion promotion allows various materials (PP, PVDF, E-CTFE) to be processed, creating
the strongest possible bond between the pipe and the laminate. Laminated pipes
are primarily used for the purpose of transporting aggressive substances in the
field of mechanical engineering. Due to stringent safety requirements applicable
within this sector, operators have to ensure a high bonding strength between the
thermoplastic pipe and the load-bearing structure. This is achieved by means
of the new processing technique. Having only just been launched, this product
has already had its first success story as part of a major construction project.
SIMONA® Twin-Wall Sheets of the Third Generation
SIMONA® Twin-Wall Sheets of the third generation represent much more than
an updated version of their predecessors. Thanks to highly innovative technical
adjustments, the efficiency and stability of the sheets have been optimised while
keeping the overall thickness of the walls to a minimum. This will help to open
up new areas of application.
Extruded Sheets Made of Resysta®
SIMONA and Resysta International GmbH have come up with a genuine alternative to wood-based products – in the form of extruded sheets made of Resysta®.
The polymer containing an eco-friendly filler that features rice husks is made into
sheets that look and feel like real wood. In contrast to comparable wood-based
products, however, these moisture-resistant products do not swell when they are
exposed to water. What is more, they are UV-resistant and even have anti-slip
properties when wet. This makes the material suitable not only for indoor but
also for outdoor use - while also conserving valuable resources. The potential
areas of application for these sheets include wall and facade elements, fences,
outdoor furniture, interior car linings, sanitary fittings and play equipment.
work with new materials and combinations of material.
New training programme offered by SIMONA Sales Academy
The SIMONA Sales Academy brings together the company’s global training activities for customers and business partners. Alongside training centred around
the fundamentals of thermoplastics, the Academy also offers tailor-made seminars. The new training programme for 2014 will be presented at K.
SIMONA exhibition stand at K 2013 Hall 8a, Stand F32
Product Overview
SIMONA AG
02.01.002
Products made by extrusion
02.01.005
Parts made by laminating
02.01.006
Parts made by mechanical treating
02.01.007
Parts made by compression moulding
02.01.009
Parts made by foaming
02.01.010
Parts made by injection moulding
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.003
Plastics products and parts for building applications
02.03.009
Plastics products and parts for agriculture
Technology Centre to be built in Kirn
SIMONA AG will be looking to further strengthen its innovatory capabilities by
building a new Technology Centre at its headquarters in Kirn. As from 2014,
it will offer the most advanced process technology available within the area of
polymer production. The Technology Centre will expand SIMONA’s capacity
levels, allowing the company to conduct more customer-specific development
© 2014 Messe Düsseldorf GmbH
679
© 2014 Messe Düsseldorf GmbH
680
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.03.011
Plastics products and parts for mechanical engineering
02.03.012
Plastics products and parts for medical engineering
02.03.014
Plastics products and parts for food processing
industry
02.03.015
Plastics products and parts for transport/packaging
02.04.001.05
Semi finished products of polyethylene (PE)
02.04.001.07
Semi finished products of polypropylene (PP)
02.04.001.11
Semi finished products of polyvinylchloride (PVC)
02.04.001.13
Semi-finished parts/products made from
fibre-reinforced plastics
regard to flexibility of the specific material. The ex-truded sheets, available in
a natural and skin-tone colour, are supplied in the formats 400 x 400 mm and
2000 x 1000 mm, with thicknesses rang-ing from 3 to 15 mm. Customised sizes
and sheets with antibacterial properties are available on request.
SIMONA® SIMOLIFE EVA Sheets have excellent hot-forming properties. Displaying minimal material shrinkage during cool-down, they also offer the advantage of high dimensional stability with uniform wall thickness distribution. In
combination, this ensures the very best in fit together with superior adhesive
properties and soft-touch comfort. With properties in-cluding biocompatibility in
accordance with DIN EN ISO 10993-5/-10 and resistance to sweat, cosmetics,
skin creams and disinfectants, they offer excellent safety and extreme durability.
The new SIMONA® SIMOLIFE EVA flyer provides a summary of the vari-ous
product properties, product range and material specifications. The flyer can be
downloaded or ordered at www.simona.de/simolife.
Sonotronic Nagel GmbH
Address
Becker-Göring-Str. 17-25
76307 Karlsbad
Germany
Phone
+49 7248 9166-0
SIMONA® SIMOLIFE
Fax
+49 7248 9166-144
SIMONA® SIMOLIFE – Extensive product range for orthopaedic solutions
Internet address
www.sonotronic.de
EVA added to semi-finished parts portfolio
E-Mail
info@sonotronic.de
Stand
Hall 11, A42 (Page 902)
02.04.003.01
Parts from standard plastics
Product Details
02.04.001.07
SIMONA AG
Semi finished products of polypropylene (PP)
Kirn, April 2013. The newly developed SIMONA®
SIMOLIFE line is an extensive product range specially
tailored to the requirements of the or-thopaedics technology sector. The group of semi-finished parts featuring the materials PE, PP and PETG has now been extended to include sheets
engineered from ethylene-vinyl acetate (EVA).
SIMONA® SIMOLIFE EVA has been specially designed for the manufac-ture
of inner sheaths used in arm and leg prosthetics. The two product types EVA
flex and EVA superflex are designed to meet a wide range of requirements with
© 2014 Messe Düsseldorf GmbH
681
© 2014 Messe Düsseldorf GmbH
682
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Special Coatings GmbH & Co. KG
Product Overview
Sonotronic Nagel GmbH
02.02.005
Welding
03.03.004
Cutting machines
03.03.008
Punching and perforating machines
03.03.011
Bag and sack making equipment
03.05.001
Hot-plate welding machines
03.05.004
Ultrasonic welding machines
Product Details
02.02.005
Address
Zeppelinstr. 14
82205 Gilching
Germany
Phone
+49 8105 7727300
Fax
+49 8105 7727301
Internet address
www.special-coatings.com
E-Mail
info@special-coatings.com
Stand
Hall 04, A23 (Page 870)
Sonotronic Nagel GmbH
Company News
Welding
Ultrasonic and hot plate welding
09/18/2013
SONOTRONIC offers standard machines and customized
special machines, systems and components for ultrasonic welding and hot plate welding.
SC-JOB COATING
Our high-performance standard machines, special machines, systems and components are versatile and their
build quality tried and tested. The high quality of our
products speaks for itself – our products are designed
and produced with maximum precision at our production site. We also attach
particular importance to finding the optimum solution to your application with our
products.
Special Coatings GmbH & Co. KG
NEW WAYS OF SURFACE COATING
The complete coating system for bulk small parts from
one source. Lacquering systems, SC-Coater® spin
coating machine and service. This know-how allows
you to convert your ideas into reality. When will we
become acquainted with your ”tiny bits”?
Services with brilliant effects! Naturally, SC will have your small parts coated as
a service to you. We take on the complete project management - from sampling
up to series-production.
www.special-coatings.com
Hall 4, Booth A 23
© 2014 Messe Düsseldorf GmbH
683
© 2014 Messe Düsseldorf GmbH
684
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Specialty Polyfilms (India)
Product Overview
Special Coatings GmbH & Co. KG
01.14.012
Paints, coatings
02.05.047
Surface treated and decorated parts
03.04.005
04.05
F-89 & 102, MIDC Area, Waluj
431 136 Aurangabad, Maharashtra
India
Phone
+91 240 2554045
Fax
+91 240 2554046
Internet address
www.specialty-films.com
E-Mail
wrapit.export@specialty-films.com
Stand
Hall 08b, D61 (Page 890)
Coating plant
Subcontracting
Product Details
02.05.047
Address
Special Coatings GmbH & Co. KG
Surface treated and decorated parts
SC-Laquers
The range of laquers and coatings offered by Special Coatings is as varied as the needs of our customers. We have a large selection of standard water
and solvent-based coatings and laquers for decorative
and functional finishes.
Product Overview
clear varnishes matte varnishes metallic effect laquers
special effect laquers (high-end matte galvaised look)
corrosion protection coatings temporay corrosion protection coatings anti-friction
coatings primers individual effects ..
Specialty Polyfilms (India)
02.04.002
Films
02.05.061
Protective covers, hoods and wrappers
02.05.068
Technical films
Product Details
02.04.002
Specialty Polyfilms (India)
Films
Hoodit™ - Stretch Hood Film
Specialty’s Hoodit™ Stretch Hood Film is a co-extruded film
suitable for high-speed automatic machines. Our film offers lower film cost per-pallet, operating cost, excellent allweather protection and packaging speed. We manufacture
film combinations for a wide range of market applications,
enabling our customers to better tailor the right film structure
for each application. Securap stretch hood is available in
variety of sizes (upto pallet sizes of 4’ x 9’). The film is avail-
© 2014 Messe Düsseldorf GmbH
685
© 2014 Messe Düsseldorf GmbH
686
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
able in various colors black, opaque, color tinted & color opaque. Stretch hood
packaging technology means improved packaging quality ! Pallets packed by
stretch hoods are absolutely waterproof : the foil covers the entire pallet from
all directions. Tension in both horizontal and vertical directions, this means that
the goods are pressed downwards on to the pallet. Irregular pallets can also
be packed easily since the Stretch Hood Film follows narrowly the form of the
pallet Benefits 1) High-speed With one single performance line you can easily
pack more than 150 pallets an hour 2) Flexibility with one film size you can wrap
different sizes of pallets 3) Optical Property Excellent transparency due to single
layer film, no overlaping of layers 4) High ROI Film consumption is lower since no
overlaps are required as in Stretch wrap films 5)Low cost of ownership 6)Low
maintenance costs of the machine due to less moving parts and less heated
parts as compared to other packaging systems.
Mulchit™ - Mulch Film
Agricultural mulch film is a plastic film - available in rolls
or as folded- used in the ground, under the root systems of plants, to facilitate crop cultivation. Advantages
• limits weed growth • increases soil retention of moisture and heat • prevents soil erosion by wind and rain •
modifies soil temperature • enhances soil structure by
preventing soil crusting and soil compaction Benefits •
Improves crop yield and precocity. The growth of plants on mulch can be twice
that of plants in unmulched soil. • Since the mulch film raises the temperature
of the soil in the plant bed, it promotes faster crop development and earlier harvest. • Save on weedicide expenses. Black & White–on–black mulches will
reduce light penetration to the soil. Weeds cannot generally survive under such
mulch. • Reduces Soil Compaction: Since the mulch does not allow much of
water to wet the soil, the soil under plastic mulch remains loose friable and well
aerated. This allows the roots to have access to adequate oxygen and at the
same time it enhances microbial activity. • Cleaner Vegetable Produced: Since
no soil is splashed onto the plants or fruit, the edible product from mulched crops
is cleaner and less subject to rot; the plastic should be stretched tight to allow
the run-off of water • Increases Growth: Mulch film enhances the availability of
CO2 which helps the growth of leaves of the plant. Research has shown that
high levels of carbon dioxide may build up under the plastic because the film
does not allow the gas to escape; it has to escape through the holes punched
for the plants and a “chimney effect” is created, resulting in abundant CO2 for
the actively growing leaves. • The crop protected by mulch film is less prone to
attack by viruses. • The crop also has less chance of getting infected by insects.
• The crop grown under mulch film requires less water than unmulched crop.
© 2014 Messe Düsseldorf GmbH
687
• Saves cost of labour involved in weed removal. Specifications: • Thickness
- 7 to 100 micron • Width - 250 mm to 1800 mm (Lay Flat). Width upto 2600
mm will be available by Sept. 2008 • Color - Natural (transparent), Black, or
Any Photo selective Colour, Bi-Color – Black/White; Black/Yellow; Black/Red;
Brown/Yellow, or as per specific requirement
WRAPit™ - PE Cling film
WRAPit™brand of cling film is manufactured through
an engineered combination of material and process innovation that produces high-clarity cling film free of any
taste or odour. We are India’s first cling film manufacturer to be certified with ISO 9001:2000. Wrapit™ is
certified as safe for food contact as per IS: 10146-1982 by CFTRI and as per
EU directives 2002/72/EEC by SGS and Intertek Testing Services. Polyethylene
(PE) - the base material used in manufacturing WRAP it™ is a simple structure
polymer that puts least eco- strain on environment. PE disintegrates in a given
time period and, when annihilated, it burns to hydrogen & carbon with no polluting material. PE films are replacing conventional films, which contain toxic
plasticizers (such as phthalates), stabilizers containing dangerous heavy metals
(such as lead), fungicides and other toxic substances. Advantages of WRAPit™
over conventional cling film: • Conforms to food contact regulation • 100 % nontoxic • 100 % recyclable hence eco-friendly • More economical due to low density
of LLDPE than conventional film Important characteristics of WRAPit™: • Excellent cling property to seal food in containers made of porcelain, plastic, glass or
even paper • Crystal - clear transparency • Sealing capacity of WRAP it™ keeps
food fresh for a long time • Elongation at break allows accommodating odd sized
sealing without tearing • Microwave safe • Suitable for high speed in-line automatic wrapping machines Product Variants of Wrapit™ • Wrapit™ Household
• Wrapit™ Catering • Wrapit™ Meat • WRAPit™ Anti-Fog(Micro-Perforated) •
Wrapit™ Perfa Roll
WRAPit™ PE Cling Films
Food wrap Cling film suitable for In-Flight kitchens,
Fruits & vegetables, household usage, Foodservice,
Catering etc. The films are certified as safe for food
contact as per EU directive 2002/72/EEC & IS 10146:1982.
We are having 8 years+ of Private Label Manufacturing
Experience of supply to to leading supermarkets, cash ‘n carries and retails &
foodservice wholesalers globally.
© 2014 Messe Düsseldorf GmbH
688
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.061
Securap™ - VCI Stretch Film
Protective covers, hoods and wrappers
Meat Film, Döner Film, Micro – perforated Cling Film
Meat Film, Döner Film, Micro – perforated Cling Film, Anti
– fog Cling Film
These are variants of the Food Wrap Cling Film. Meat Film
is used to wrap the trays/containers of finished products
like pieces of meat, nuggets, sausages etc. Döner film is
used for wrapping Döner (kebabs) while micro perforated
and anti- fog film is used for wrapping fresh fruits & vegetables.
The films are certified as safe for food contact as per EU directive 2002/72/EEC
& IS 10146:1982.
SECURAP® VCI Stretch Film
For Corrosion prevention for ferrous and non ferrous metals, Cold rolled steel,
Automobile components, White goods, Seaworthy packaging, etc.
Securap™ VCI stretch film is a high performance film
developed for corrosion protection of ferrous and nonferrous metals. This film is used by exporters of auto
& engineering products to ensure odd-shaped or large
metal parts secure & rust free during shipment. Volatile
Corrosion Inhibitor(VCI) stretch film has excellent corrosion protection properties. The film resists moisture,
prevents rust formation and provides superior mechanical properties to snug fit large palletized loads. Securap™ VCI stretch is engineered using state-of-the art additives that resists moisture and inhibits rust
formation, as well as providing superior mechanical properties to provide snug
fit for palletized loads. The film is transparent for easy inspection and identification of parts. Securap™ VCI stretch is a result of several innovations that allow
consumers to down-gauge thus reducing costs per pallet. Advantages of Securap™ VCI Stretch Wrap Film • Corrosion & contamination protection • Outer
layer provides excellent mechanical properties - puncture & tear strength • Provides multi-metal corrosion protection with VpCITM action • Protected parts can
be used immediately without cleaning or degreasing • Available in a variety of
widths, lengths & thicknesses
Securap™ - Antistatic Stretch Wrap Film
Securap™ Antistatic Stretch Wrap Film is designed for stretch
wrapping during transportation of static sensitive materials especially electronic goods and components. Securap™ Antistatic stretch wrap film has excellent mechanical properties
that offers more than 300 % stretchability and reduces static
charge generated in electronic assemblies and sensitive electronic devices. Advantages of Securap™ Antistatic Stretch
Wrap Film • ESD protection in electronics goods • Excellent
moisture and dust barrier • Excellent stretchability • Useful in packing & transportation of static sensitive materials especially electronics goods, protective
devices, metal parts and components, paints and chemicals etc. Available in
machine as well as manual grade. Length & width of the film can be customized
as per customer requirements.
© 2014 Messe Düsseldorf GmbH
689
SECURAP™- Stretch Wrap Film / Pallet Wrap film
Stretch film, also known as stretch wrap or pallet wrap,
is one of the most popular unitization materials on the
market. Unitization is a process of bundling and securing several individual packages together, often on a pallet. This is done manually or using high-speed wrapping
machines for better quality & speed. Advantages of SECURAP: •High elongation in Machine Direction (MD) •Good tear strength in Transverse Direction (TD)
•Excellent Puncture Resistance •Excellent draw down characteristics. •More
quantity of film than other material due to low density of LLDPE. SECURAP is
available in following variants : •SECURAP - Hand Grade Stretch Wrap Film,
for Pallet wrapping by manual process. •SECURAP ULTRA – Machine Grade
Stretch Film for Low & Medium speed Automatic machines of Pallet wrapping
•SECURAP Premium - Machine Grade Stretch Film for high speeds Automatic
machines of Pallet wrapping. •SECURAP - Antistatic Stretch Wrap Film •SECURAP - VCI Stretch Wrap Film •SECURAP UV Black - Stretch Wrap Film
© 2014 Messe Düsseldorf GmbH
690
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Silrap™ - Silage Film
MASKit™- Masking/Surface Protection Film
Silage film is an agricultural film used in farmland for
protection and storage of forage, silage, hay and maize
in areas where the growth period of herding grass is relatively short. Bundling of silage using tacky films helps
in transportation and delivery. Silage films act as green-store since it keeps the
forage under an optimum humidity condition to facilitate controlled anaerobic
fermentation. Advantages • Maintains the nutritional value of forage and inhibit
undesirable fermentation processes • Reduces the risk of forage getting spoiled
during bad weather • Enhances the nutritional value of forage during storage
• Forage covered by Silage Film is of high density and is easily digestible by
the cattle Benefits • Low-cost: No investment on storage tank or warehouse for
forage • Durability- even in the presence of high UV radiation and agricultural
chemicals • Performs well even at extreme temperatures – does not break or
become brittle • Avoids waste and saves cost Properties • Excellent mechanical
properties • Resistant to weathering • High quality tackifier gives maximum cling
to the film for an airtight seal on every bale Specification • Width: 250 mm (10”)
/500 mm (20”) / 750mm (30”) • Thickness: 25 – 150 micron • Length: 1500 m /
1800 m • Color: White, Black, Green • UV Stabilized
MASKit™ - Masking/Surface protection film is designed
to protect surface substrates from abrasion,dust,moisture
& scratches. We manufacture both glue and non-glue
based masking films of varying widths and thickness to
match protection needs of the substrate. MASKit™ is
available in width upto 2.7 m and thickness from 25 to 100 microns Application
Areas : Ф PC, PMMA (Acrylic), PP, PVC, PS, ABS, SAN, HIPS sheets Ф Reinforced plastic sheets (FRP & GRP) Ф Thermoformed PC, PMMA (Acrylic), PP,
PVC, PS, ABS, SAN, HIPS sheets Ф Decorative Laminates. Ф Glass sheets Ф
Pre-coated steel sheets Ф Automobile accessories Ф Automotive body paneling Ф White goods Ф TV picture tube shells, etc. Benefits of Non-Glue based
protective film : Ф When the film is peeled off from the surface, there would be
no trace / stains or the residue of glue on the surface that was protected. Ф
When film is peeled off from the protected surface, it does not remove the coating along with it. Ф Easy Peel – off. Ф As the film is wrinkle and crease free, it
does not leave any marks or patches on the surface at the time of use. Ф 35%
more meterage of film than PVC due to low density of PE. Ф 100 % recyclable
hence eco- friendly. We can engineer protection films depending on the surface
to be protected
Stretch Hood Film
Silage & Mulch Film FOR AGRICULTURE USAGE
Highly specialized film customized to run on high speed automatic machines suitable for on – line pallet packaging of
bulk goods such as Cement bags, Chemical bags, appliances,
Empty Bottles, Beverages, Refractory Bricks, Insulation Material, etc.
Mulch Film is for agriculture. It enhances plant growth where as Silage film is
used for wrapping forage, bale, hay, grass & maize to protect from sunlight and
store it.
Takrap™ - Glass Fibrewrap Film
02.05.068
This film is used for wrapping of bales of glass fiber,
yarn, or fibrous material for their protection against dust
and contaminants. The key advantages of Takrap™
Glass Fibrewrap Film are: • 100 % outside cling • Facilitates unwinding of Roving bobbin till outer tail; it does
not get entangled with the strands • Dynamic dimensional stability • Easy peel off
• End user friendly while unwinding as well as handling • Excellent physiochemical properties • Protects from dust and contaminants • Environment friendly
and 100 % recyclable Securap™ Glass Fibrewrap Film - Applications Useful for
wrapping of: • Roving ball (bobbin) • Single end / multi end roving • Fiber glass
liner • Chopped - strand mat • Fabrics • Yarn • Acoustic & insulation material •
Woven roving or any fibrous material
Technical films
MASKit™ Masking Film (Non Glue)
Surface Protection film for various substrate types.
Plastic sheets, pre-coated steel sheets„ Aluminum sheet,
composite metal panels, white goods, glass, Automobile body paneling, etc.
© 2014 Messe Düsseldorf GmbH
691
© 2014 Messe Düsseldorf GmbH
692
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Sprimag systems are characterized by:
SPRIMAG Spritzmaschinenbau GmbH & Co. KG
Address
Henriettenstr. 90
73230 Kirchheim unter Teck
Germany
Phone
+49 7021 579-0
Fax
+49 7021 41760
Internet address
www.sprimag.de
E-Mail
info@sprimag.de
Stand
Hall 04, A35 (Page 870)
Product Overview
Späh Karl GmbH & Co. KG SPÄH Gruppe (SPÄH,
POPP, QUADRIGA, SCHIPPL) DICHTUNGEN UND
MEHR
Address
Industriestr. 4-12
72516 Scheer
Germany
Phone
+49 7572 602-0
Fax
+49 7572 602-167
Internet address
www.spaeh.de
E-Mail
info@spaeh.de
Stand
Hall 12, E19 (Page 906)
SPRIMAG Spritzmaschinenbau GmbH & Co. KG
02.05.007
Coatings
03.04.005
Coating plant
Product Details
02.05.007
Customized solutions for the most demanding Very high quality standard Robust design and high quality workmanship Low maintenance and wear design
Energy-and resource-saving concepts Own application, compatible with the
equipment Servo technology for high dynamics and reproducibility Dry or wet
suction Single-or multi-layer coating Batches or mixed operation
SPRIMAG Spritzmaschinenbau GmbH & Co. KG
Coatings
Automated Coating Systems
Sprimag advices you competent in all matters relating
coating surfaces and offers an optimal solution that is
tailored to your needs: whether rotationally symmetrical parts, flat parts or parts with complex geometry,
whether coated completely or only partially.
Our product portfolio includes both compact coating machines for small quantities of parts, as well as fully automated, turnkey coating lines. Based on the
range of parts, the optimal machine concept for your coating requirements will
be selected.
© 2014 Messe Düsseldorf GmbH
693
© 2014 Messe Düsseldorf GmbH
694
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Company News
Späh Karl GmbH & Co. KG SPÄH Gruppe (SPÄH, POPP,...
Product Overview
10/08/2013
Extended SPÄH service for seals with optical sort-out
machine
SCHEER - GERMANY, September 2013 – For the product
area seals and stamped parts, Karl Späh GmbH & Co. KG
offers visual inspection by machine with precise count packaging and printing according to customer requirements .
In recent years the demands on part tolerance have increased significantly. Moreover, our customers understandably don’t want any defective seals or stamp scrap in their
deliveries. As a logical consequence of this continual rise
in customer requirements we have taken action and put an
optical sort-out machine into operation in our Scheer parent plant.
The inspection unit has a wide range of sorting options and additional functions.
These include material colour, part dimensions as well as searching for damaged parts and stamp scrap such as dropouts. Stamped parts with a thickness
of 1 to 5mm and a maximum overall dimension of 73mm can be sorted automatically. As a further, additional service, it is possible to have parts precise count
packaged in PE pouches. These can even be individually printed according to
customer requirements (e.g. with a logo, batch date, article number, barcode,
etc - see photo).
Learn more about our enhanced product service for seals and stamped parts at
the K trade fair from 16th to 23rd October, at the BWI joint stand in exhibition
hall 12, stand E 19 .
With over 500 workers, SPÄH produces seals and stamped parts of all kinds,
turning, milling and plotter parts predominately made from plastic, precision
water-jet cut parts and other mechanically produced parts for purchase made
from elastomers, plastics as well as sealing and insulation materials and cellular
materials for all branches of industry inEurope. Along with the parent company
in Scheer, Karl Popp GmbH & Co. KG in Bad Bevensen, QUADRIGA DichtungsGmbH inNorderstedtand SCHIPPL Dichtungen GmbH in Welden also belong to
the SPÄH group.
You can find more information on SPÄH at www.spaeh.de .
© 2014 Messe Düsseldorf GmbH
695
Späh Karl GmbH & Co. KG SPÄH Gruppe (SPÄH, POPP,...
02.01.006
Parts made by mechanical treating
02.03.001
Plastics products and parts for plant building
02.03.002
Plastics products and parts for automotive
02.03.011
Plastics products and parts for mechanical engineering
02.04.001.10
Semi finished products of polyurethane (PUR)
02.04.001.12
Semi finished products of rubber
02.04.001.14
other and machined semi finished products / Pre-cut
parts
02.04.002
Films
02.04.003.01
Parts from standard plastics
02.04.003.03
Parts from high performance thermoplastics
02.05.010
Sealing profiles
02.05.011
Sealings/Sealrings
02.05.015
Electrical installation material
02.05.028
Rubber / plastics / metal combinations
02.05.030
Laminated fabric and laminated paper
02.05.035
Bogie wheels and runners
© 2014 Messe Düsseldorf GmbH
696
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.05.049
Boards and vulcanite boards
02.03.001
02.05.056
Foam products
Kunststoffteile in CNC-Präzision ab einem Stück
02.05.065
Pressed parts in accordance with sample, drawing or
customer’s tools
Dreh- und Frästeile von SPÄH erfüllen als multifunktionale Konstruktionsteile und Zulieferteile wichtige Aufgaben in vielen Branchen, beispielsweise:
02.05.069
Parts of industrial laminates
02.05.074
Composite boards
02.05.075.01
Fibreglass-reinforced plastic parts
02.05.075.02
Other fibre-reinforced plastic parts
02.05.079
Soft rubber boards
Product Details
02.01.006
Plastics products and parts for plant building
Anlagenbau, Armaturen- und Apparatebau, Antriebstechnik, Automotive, Chemische Industrie, Drucklufttechnik, Elektrotechnik, Elektronik, Fahrzeugbau, Feinwerktechnik, Heizung/Klima/Lüftung,
Hydraulik, Maschinenbau, Medizintechnik, Pneumatik, Transport- und Fördertechnik, Verfahrenstechnik, Zulieferer.
Ob Prototyp, Nullserie oder Großserie – SPÄH verwirklicht Ihre Wünsche zum
vereinbarten Termin. Wir sind extrem flexibel, weil wir Ihnen anwendungstechnische Beratung, Konstruktion, Produktion und Service aus einer Hand bieten.
Späh Karl GmbH & Co. KG SPÄH Gruppe (SPÄH, POPP,...
Parts made by mechanical treating
Die präzise Verarbeitung von Hochleistungs-Kunststoffen ist unsere Stärke . Unsere leistungsfähigen Produktionseinrichtungen bis hin zur CNC-Komplettbearbeitung
mit Wirtschaftlichkeit ab Losgröße 1 decken ein großes Spektrum rationeller Verarbeitungsverfahren für Stäbe, Rohre und Platten ab. Präzision und Qualität zu
günstigen Preisen sind das Ergebnis. Gut sortierte Halbzeuge-Lager verhindern
Werkstoff-Engpässe und steigern die Termin-Sicherheit.
Im weiten Spektrum der mechanischen Be- und Verarbeitung von thermoplastischen Standard- und Hochleistungskunststoffen sowie Elastomeren besitzen
wir spezielles Know-how mit beispielsweise:
Product information
Karl Spaeh GmbH & Co. KG, Scheer, Baden-Wuerttemberg,
Germany, Spaeh – seals and more, Fabrication of seals
and gaskets, stampings, insulating parts, rings, strips,
sections and other vendor parts, turned and milled components, water jet cut parts, moulded and formed parts,
semi-finished elastomer, rubber and plastic products,
special parts for sealing technology according to ISO 9001:2008; own tool- and
cast-form-manufacturing as basis for precision. We are looking forward to hearing from you. Spaeh group (Spaeh, Popp, Quadriga, Schippl) – your partners of
sealing technology.
EPDM, NBR, PA, PE, PEEK, POM, PTFE, sowie PUR (Polyurethan, Vulkollan®)
Viton u.a.
Weitere Werkstoffe verarbeiten wir auf Anfrage. Ganz gleich, welchen Werkstoff
Sie einsetzen wollen, wir verarbeiten ihn mit der gewünschten Präzision.
02.03.002
Plastics products and parts for automotive
Drehteile, Frästeile und Plotterteile in CNC-Präzision
Dreh-, Fräs- und Plotterteile von SPÄH erfüllen als
multifunktionale Konstruktionsteile und Zulieferteile wichtige
Aufgaben in vielen Branchen, beispielsweise:
Anlagenbau, Armaturen- und Apparatebau, Antriebstechnik, Automotive, Chemische Industrie, Drucklufttechnik, Elektrotechnik,
Elektronik, Fahrzeugbau, Feinwerktechnik, Heizung/Klima/Lüftung, Hydraulik,
© 2014 Messe Düsseldorf GmbH
697
© 2014 Messe Düsseldorf GmbH
698
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Maschinenbau, Medizintechnik, Pneumatik, Transport- und Fördertechnik, Verfahrenstechnik, Zulieferer.
Ob Prototyp, Nullserie oder Großserie – SPÄH verwirklicht Ihre Wünsche zum
vereinbarten Termin. Wir sind extrem flexibel, weil wir Ihnen anwendungstechnische Beratung, Konstruktion, Produktion und Service aus einer Hand bieten.
Die präzise Verarbeitung von Hochleistungs-Kunststoffen ist unsere Stärke . Unsere leistungsfähigen Produktionseinrichtungen bis hin zur CNC-Komplettbearbeitung
mit Wirtschaftlichkeit ab Losgröße 1 decken ein großes Spektrum rationeller Verarbeitungsverfahren für Stäbe, Rohre und Platten ab. Präzision und Qualität zu
günstigen Preisen sind das Ergebnis. Gut sortierte Halbzeuge-Lager verhindern
Werkstoff-Engpässe und steigern die Termin-Sicherheit.
Im weiten Spektrum der mechanischen Be- und Verarbeitung von thermoplastischen Standard- und Hochleistungskunststoffen sowie Elastomeren besitzen
wir spezielles Know-how mit beispielsweise:
EPDM, NBR, PA, PE, PEEK, POM, PTFE, sowie PUR (Polyurethan, Vulkollan®)
Viton u.a.
Weitere Werkstoffe verarbeiten wir auf Anfrage. Ganz gleich, welchen Werkstoff
Sie einsetzen wollen, wir verarbeiten ihn mit der gewünschten Präzision.
02.03.011
Plastics products and parts for mechanical engineering
Dreh- und Frästeile aus Kunststoffen made in Germany
Werkstoff-Engpässe und steigern die Termin-Sicherheit.
Im weiten Spektrum der mechanischen Be- und Verarbeitung von thermoplastischen Standard- und Hochleistungs- kunststoffen sowie Elastomeren besitzen
wir spezielles Know-how mit beispielsweise:
EPDM, NBR, PA, PE, PEEK, POM, PTFE, sowie PUR (Polyurethan, Vulkollan®)
Viton u.a.
Weitere Werkstoffe verarbeiten wir auf Anfrage. Ganz gleich, welchen Werkstoff
Sie einsetzen wollen, wir verarbeiten ihn mit der gewünschten Präzision.
02.04.001.10
Semi finished products of polyurethane (PUR)
Cast and moulded parts
QUADRIGA in Norderstedt covers the product division
“cast and moulded parts” within the SPÄH corporate
network. High-performance production facilities with
machines and systems for casting and the company’s
own mould construction offer highly flexible potential,
from individual parts to series.
We also offer a broad semi-finished product range of PUR elastomers for further processing by you as well as custom-made products. Cast and moulded
parts from QUADRIGA are used as construction and supply parts in all industry
sectors and industries.
Materials
Dreh-, Fräs- und Plotterteile von SPÄH erfüllen als
multifunktionale Konstruktionsteile und Zulieferteile wichtige
Aufgaben in vielen Branchen, beispielsweise:
Vulkollan®, Polyurethane, Polytan and PUR/metal, PUR/plastic.
Anlagenbau, Armaturen- und Apparatebau, Antriebstechnik, Automotive, Chemische Industrie, Drucklufttechnik, Elektrotechnik, Elektronik, Fahrzeugbau, Feinwerktechnik, Heizung/Klima/Lüftung, Hydraulik, Maschinenbau, Medizintechnik,
Pneumatik, Transport- und Fördertechnik, Verfahrenstechnik, Zulieferer.
Semi-finished products in the form of sheets 0.5 – 50 mm thick, blocks, strips,
square rods, round rods of 5 to 230 mm diameter, ground rods of 5 to 34 mm
diameter, pipes, including cutting service and mechanical finishing.
Forms, dimensions, applications
Ob Prototyp, Nullserie oder Großserie – SPÄH verwirklicht Ihre Wünsche zum
vereinbarten Termin. Wir sind extrem flexibel, weil wir Ihnen anwendungstechnische Beratung, Konstruktion, Produktion und Service aus einer Hand bieten.
Die präzise Verarbeitung von Hochleistungs-Kunststoffen ist unsere Stärke . Unsere leistungsfähigen Produktionseinrichtungen bis hin zur CNC-Komplettbearbeitung
mit Wirtschaftlichkeit ab Losgröße 1 decken ein großes Spektrum rationeller Verarbeitungsverfahren für Stäbe, Rohre und Platten ab. Präzision und Qualität zu
günstigen Preisen sind das Ergebnis. Gut sortierte Halbzeuge-Lager verhindern
© 2014 Messe Düsseldorf GmbH
699
Special products: other strengths, oversize formats up to 4,000 x 2,000 mm
and/or up to 7,000 x 1,000 mm. Sheathed sheets with metal insert, individual
hardness settings and special colours.
Moulded parts according to drawings, samples or specifications such as wearand-tear parts as strippers, e.g. on snow clearing systems, stop buffers, rolls,
membranes, mixer linings, coatings of screen print systems or elements of drive
and conveyor technology, such as couplings, wheels, rolls and more.
® = registered trademark of Bayer AG, Leverkusen, Germany
© 2014 Messe Düsseldorf GmbH
700
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
02.04.001.12
Semi finished products of rubber
02.04.001.14
other and machined semi finished products / Pre-cut
parts
Halbzeuge aus Elastomeren direkt ab Lager
Turning and milling parts
Elastomere
Service und Dienstleistung haben bei SPÄH oberste Priorität. So bieten wir
Ihnen über die vorgenannten Leistungen hinaus noch weitere Services an,
beispielsweise:
The headquarters of the SPÄH corporate group in
Scheer is specialised in the service field “turning and
milling parts” made of plastics and elastomers. The
material Vulkollan® and Polyurethane are supplied by
the group member QUADRIGA in Norderstedt as semifinished products. The precise processing of highperformance plastics is our strength. Our efficient production facilities up to complete CNC machining with
cost-efficiency from a lot size 1 cover a large spectrum of rational machining processes for rods, tubes, and sheets. Well-sorted stocks of semi-finished products
prevent material bottlenecks and increase the reliability with deadlines. Turning
and milling parts from SPÄH fulfil important tasks in many industries as multifunctional construction and supply parts.
- Sonderzuschnitte für Abdeckungen mit großem Flächenbedarf
Materials
- Ausrüstung von Zuschnitten mit Bohrungen, Ausschnitten o.ä.
All plastics – in particular PA, PE, PEEK, POM, PTFE and PUR (Polyurethane,
Vulkollan®). We can process further materials at request.
- Ausrüstung von Zuschnitten mit Montagehilfen
Forms, dimensions, applications
- Werkstoffe einseitig oder beidseitig geschliffen zur Erreichung vorgegebener
Dickentoleranzen oder
Sealing rings, support rings, spiral rings, O-rings, and other form rings, and many
technical parts with CNC precision in rod processing up to 100mm diameter,
chuck processing up to 3,000 mm diameter, sheet processing up tot 2,000 x
1,000 x 100 mm (L x W x H) or in the milling machining centre 420 x 300 x 150
mm (L x W x H).
Werkstoffauswahl: Butyl, CR, CSM, EPDM, FKM, HNBR,
NR, NBR, PUR (Polyurethan, Vulkollan), SBR, VMQ
Herausragende Merkmale Elastomere: Multifunktionelle Anwendbarkeit, Beständigkeiten
Lieferformen: Platten, Rollen, Streifen und Zuschnitte, auch einseitig selbstklebend ausgerüstet
- je nach Werkstoff von 0,3 bis ca. 50 mm Stärke
Zulassungen / Registrierungen: DVGW, FDA, KTW, WRC, Werksnormen zahlreicher Unternehmen
definierter Oberflächenrauhigkeit
- Rundstäbe schleifen
- Kunststoffplatten sägen, hobeln und fräsen
- Qualitätsnachweise (Maße, Oberfläche, etc.) auf Wunsch
02.05.011
Sealings/Sealrings
- Lieferung von Sonderqualitäten, Sonderfarben bei Vulkollan oder Polyurethan
und Elastomeren
Sealing materials and stamped parts
The headquarters in Scheer, POPP in Bad Bevensen,
and SCHIPPL in Welden are responsible for the product
division “sealing materials and stamped parts” which
also includes insulation parts, rings, strips, cuts and
other supply parts.
Our tool construction is the basis fro precision, performance, and cost—efficiency.
Depending on the material, quantity, and design, we use different types of tools
for our production: complete cut, sharp cut, scissor cut or steel rule dies. A large
© 2014 Messe Düsseldorf GmbH
701
© 2014 Messe Düsseldorf GmbH
702
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
portfolio of standard tools minimises the cost of the tool. With our highly efficient
production, we can cover all sizes of series – starting with lot size 1 up to several million pieces. Our well-sorted stock of semi-finished products at all sites
provides an important contribution to just-in-time delivery. Our supply parts fulfil
important functions in all sectors.
Rundstäben 5 bis 150 mm ø, geschliffenen Stäben von 5 bis 34 mm ø, Rohren,
einschließlich Zuschneide-Service und mechanischer Endbearbeitung.
Materials
Formteile nach Zeichnung, Muster oder Vorgabe wie Verschleißteile als Abstreifer z. B. an Schneeräumgeräten, Anschlagpuffer, Walzen, Membranen,
Mischerauskleidungen, Beschichtungen von Siebanlagen. Oder Elemente der
Antriebs- und Fördertechnik wie Kupplungen, Räder, Rollen u.v.a.m..
All plastic qualities, sealing and insulation materials, high-performance materials, elastomers and thermoplasts, graphite, foams, and different compounds –
in brief: all non-metallic materials. We process many other materials at request
or also in job-order production.
Sonderanfertigungen: Andere Dicken, Überformate bis 4.000 x 2.000 mm bzw.
bis 7.000 x 1.000 mm. Armierte Platten mit Metalleinlage, individuelle HärteEinstellungen und Sonderfarben.
Forms, dimensions, applications
02.05.035
We supply all kinds of stamped parts job-related according to drawing, sample
or specification in any form up to very filigree and complex geometries. We offer
a variety of dimensions in the band width of 1 mm up to approx. 10 m diameter
(from approx. 2 m glued from segments). Strips and cuts round off the offering.
We supply all sealing materials according to your requirements and tailored for
further processing by you and offer the following service: Labelling by printing
or embossing one-sided or two-sided self-adhesive for easy mounting, left on
belt for automatic feeding, with silicone bead to increase density with flexurally
weak components.
PUR-beschichtete Räder, Rollen, Walzen nach Bedarf
02.05.028
Gieß- und Formteile aus Polyurethan-Elastomeren von
QUADRIGA erfüllen als multifunktionale Konstruktionsteile in allen Wirtschaftszweigen und Branchen wichtige
Funktionen zur Erhaltung von Leistungsfähigkeit und
Sicherheit, beispielsweise als:
Abstreifer, Anschlagpuffer, Anpressringe, Antriebselemente, Auskleidungen,
Bandagen,Beläge für Fördereinrichtungen, Beschichtungen von Misch- und
Siebanlagen, Buchsen, Dämpfungselemente, Dichtungen, Elastomer-Federn,
Federelemente, Flaschengreifer, Kugeln, Kupplungselemente, Kupplungspakete,
Lärmschutz, Lüfterscheiben, Mahlscheiben, Manschetten, Membranen, Molche,
Poller, Puffer, Räder, Rakel, Ringe, Rollen, Sauger, Schallschutzplatten, Schneepflugleisten, Schneid- und Stanzunterlagen, Schutzbacken, Schwerlastrollen,
Schwimmer, Schwingungsdämpfer, Siebplatten, Spannbacken, Spurkranzrollen,
Trichter, Verschleißbeschichtungen, Ventilkugeln, Walzen, Zahnräder, Zahnriemen, Zyklone, u.v.a.m.
Rubber / plastics / metal combinations
PUR-beschichtete Metallteile von QUADRIGA
Den Produktbereich „Gieß- und Formteile“ deckt innerhalb des SPÄH Firmenverbundes die QUADRIGA
Dichtungs-GmbH in Norderstedt ab. Leistungsfähige
Produktionseinrichtungen mit Maschinen und Anlagen
zum Gießen sowie ein eigener Formenbau bieten Ihnen
ein hochflexibles Potential vom Einzelteil bis zur Serie.
Darüber hinaus bieten wir ein breites Halbzeuge-Programm an PUR-Elastomeren
für Ihre Weiterverarbeitung sowie Sonderanfertigungen. Gieß- und Formteile
von QUADRIGA finden als Konstruktions- und Zulieferteile in allen Wirtschaftszweigen und Branchen ihren Einsatz.
Im weiten Spektrum der spanlosen Formgebung von Polyurethan-Elastomeren
besitzt die SPÄH Unternehmensgruppe langjähriges Know-how mit
- Polyurethan
- Vulkollan®
- PUR/Metall
Werkstoffe
- PUR/Kunststoff u.a .
Vulkollan®, Polyurethan, Polytan sowie PUR/Metall, PUR/Kunststoff .
Formen, Dimensionen, Anwendungen
Halbzeuge in Form von Platten 0,5 - 50 mm dick, Blöcken, Streifen, Vierkantstäben,
© 2014 Messe Düsseldorf GmbH
Bogie wheels and runners
703
Vulkollan® stellen wir nach Bayer-Qualitäts-Standard in Norderstedt selbst
her. Dieses Heißgieß-Elastomer hat das höchste E-Modul unter den PURElastomeren. Es ist ein Hightech-Werkstoff für Hochleistungs-Konstruktionsteile.
© 2014 Messe Düsseldorf GmbH
704
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
K 2013 – - International Trade Fair - No.1 for Plastics
and Rubber worldwide
www.k-online.de
www.k-online.de
Eine Alternative hierzu ist unser Polyurethan, ein Qualitätsprodukt mit ausgezeichnetem Leistungsprofil zum günstigen Preis-Leistungsverhältnis.
02.05.065
02.05.056
Stanzteile individuell nach Ihren Vorgaben gefertigt
Foam products
Pressed parts in accordance with sample, drawing or
customer’s tools
Schaumstoffe sofort ab Lager inklusive Zuschneidservice
Dichtungen, Stanzteile, Isolierteile, Ringe und Zuschnitte
von SPÄH erfüllen in diesen Branchen wichtige Funktionen:
Zellige Werkstoffe
Herausragende Merkmale: Gute Alterungs- und Witterungsbeständigkeit, Elastizität
Anlagenbau, Armaturen- und Apparatebau, Antriebsund Fördertechnik, Bau, Steine, Erden, Chemie,Elektro,
Elektronik, Fahrzeugbau, Feinwerktechnik, Getränke,
Handel, Heizung/Klima/Lüftung, Hydraulik, Installation, Kraftfahrzeuge, Luftund Raumfahrt, Maschinenbau, Medizintechnik, Nahrungs- und Genussmittel,
Pneumatik, Pumpen, Kompressoren, Raffinerien, Sanitär, Transport, Umwelttechnik, Verkehr, Wasser, Zulieferer
Lieferformen: Platten, Rollen, Blöcke, Streifen und Zuschnitte – je nach Werkstoff von 2 bis 60 mm Dicke
Diese breite Branchenerfahrung macht uns zum flexiblen und universellen Partner auf diesem Leistungsfeld.
Zulassungen/Registrierungen: Werksnormen zahlreicher Unternehmen der Kfzund Elektroindustrie
Ob Muster, Kleinserie oder Großserie – Just-in-time ist bei uns Standard. Wir
sind extrem flexibel, weil wir Ihnen Beratung, Konstruktion, Werkzeugbau, Produktion und Service aus einer Hand bieten. Mit unserer leistungsfähigen Produktion decken wir sämtliche Seriengrößen – angefangen von Losgröße 1 bis zu
mehreren Millionen Teilen – ab. Die Vielfalt der Bearbeitungsverfahren ist mit der
Werkstoffvielfalt vergleichbar. Präzision zum günstigen Preis ist das Ergebnis.
Einen wichtigen Beitrag zur Just-in-time-Lieferung leisten unsere gut sortierten
Halbzeuge-Lager.
Werkstoffauswahl: Moosgummi und Zellkautschuk auf
Basis CR, SBR, EPDM, NBR und NK, PE-Schaum,
PUR-Schaum, Polyurethan zellig, Silikonschaum, Vulkollan® zellig
Service und Dienstleistung haben bei uns oberste Priorität. So bieten wir Ihnen
über die vorgenannten Leistungen hinaus noch weitere Services an, beispielsweise:
- Sonderzuschnitte für Abdeckungen mit großem Flächenbedarf,
-Ausrüstung von Zuschnitten mit Bohrungen, Ausschnitten o.ä.
- Ausrüstung von Zuschnitten mit Montagehilfen,
-Werkstoffe einseitig